- 04 Jun, 2015 7 commits
-
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Kevin Cernekee authored
When setting the PLL rates, check that: - VCO is within range - PFD is within range - PLL is disabled when postdiv is changed - postdiv2 <= postdiv1 Reviewed-by:
Andrew Bresticker <abrestic@chromium.org> Signed-off-by:
Kevin Cernekee <cernekee@chromium.org> Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by:
-
Ezequiel Garcia authored
Currently, when the rate is changed, the driver makes sure the PLL is enabled before doing so. This is done because the PLL cannot be locked while disabled. Once locked, the drivers returns the PLL to its previous enable/disable state. This is a bit cumbersome, and can be simplified. This commit reworks the .set_rate() functions for the integer and fractional PLLs. Upon rate change, the PLL is now locked only if it's already enabled. Also, the driver locks the PLL on .enable(). This makes sure the PLL is locked when enabled, and not locked when disabled. Signed-off-by:
-
Ezequiel Garcia authored
This commit adds a pll_lock() helper making the code more readable. Cosmetic change only, no functionality changes. Signed-off-by:
-
Chao Xie authored
Timer has external fast clock, and it is a mux clock. Add the timer clock type for timer driver. Signed-off-by:
Chao Xie <chao.xie@marvell.com> Signed-off-by:
-
Chao Xie authored
The suggested value in the mmp2 manual is wrong. There are only 13 bits for numerator, but some suggested value has 14 bits. Fix the factor tabled and remove the unused items. Signed-off-by:
-
Chao Xie authored
USB will drive clock from USB_PLL. Signed-off-by:
-
- 03 Jun, 2015 6 commits
-
-
Michael Turquette authored
Conflicts: drivers/clk/Kconfig
-
Mike Looijmans authored
This driver supports the TI CDCE925 programmable clock synthesizer. The chip contains two PLLs with spread-spectrum clocking support and five output dividers. The driver only supports the following setup, and uses a fixed setting for the output muxes: Y1 is derived from the input clock Y2 and Y3 derive from PLL1 Y4 and Y5 derive from PLL2 Given a target output frequency, the driver will set the PLL and divider to best approximate the desired output. Signed-off-by:
Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by:
Michael Turquette <mturquette@linaro.org>
-
Boris Brezillon authored
Even if not documented in the datasheet, the Armada 370 SoC can actually gate the CESA (crypto engine) clock. Add an entry in the gating_desc table to be able to reference the CESA gateclk in the crypto node. Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Bintian Wang authored
Add clock drivers for hi6220 SoC, this driver controls the SoC registers to supply different clocks to different IPs in the SoC. We add one divider clock for hi6220 because the divider in hi6220 also has a mask bit but it doesnot obey the rule defined by flag "CLK_DIVIDER_HIWORD_MASK", we can not get index of the mask bit by left shift fixed bits (e.g. 16 bits), so we add this divider clock to handle it. Signed-off-by:
Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by:
Bintian Wang <bintian.wang@huawei.com> Acked-by:
Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by:
Zhangfei Gao <zhangfei.gao@linaro.org> Tested-by:
Will Deacon <will.deacon@arm.com> Tested-by:
Tyler Baker <tyler.baker@linaro.org> Tested-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Bintian Wang authored
Add the header file "hi6220-clock.h" used by both hi6220 clock driver and hi6220 device tree file. Suggested-by:
-
Bintian Wang authored
__init markings on function prototypes are useless, so remove them. Suggested-by:
-
- 21 May, 2015 5 commits
-
-
Dinh Nguyen authored
The clocks on the Arria 10 platform is a bit different than the Cyclone/Arria 5 platform that it should just have it's own driver. Signed-off-by:
Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by:
-
Dinh Nguyen authored
There are 5 possible parent clocks for the SoCFPGA Arria10. Move the define SYSMGR_SDMMC_CTRL_SET and streq() to clk.h so that the Arria clock driver can use. Signed-off-by:
-
Shailendra Verma authored
Signed-off-by:
Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by:
-
Shailendra Verma authored
Signed-off-by:
-
Axel Lin authored
Remove a previously registered clock provider when unload the module. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
- 20 May, 2015 4 commits
-
-
Shailendra Verma authored
Signed-off-by:
-
Guo Zeng authored
This patch adds the fixed clocks of external crystal oscillators. Signed-off-by:
Guo Zeng <Guo.Zeng@csr.com> Signed-off-by:
Barry Song <Baohua.Song@csr.com> [sboyd@codeaurora.org: Remove size-cells/address-cells] Signed-off-by:
-
Zhiwu Song authored
the hardware node includes both clock and reset support, so it is named as "car". this patch implements Flexible clocks(mux, divider, gate), Selectable clock(mux, divider, gate), root clock(gate),leaf clock(gate), others. it also implements the reset controller functionality. Signed-off-by:
Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by:
-
Ricky Liang authored
The variable init (struct clk_init_data) is allocated on the stack. We weren't initializing the .flags field, so it contains random junk, which can cause all kinds of interesting issues when the flags are parsed by clk_register. Signed-off-by:
Ricky Liang <jcliang@chromium.org> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
- 15 May, 2015 18 commits
-
-
Rob Herring authored
Add initial clock support for Marvell PXA1928. The PXA1928 is a mobile SOC and is similar to other MMP/PXA series of SOCs, so a lot of the existing infrastructure is reused here. Currently the PLLs are just fixed clocks, and not all leaf clocks are implemented. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by:
-
Rob Herring authored
This adds the clock binding documentation for the Marvell PXA1928 SOC. The PXA1928 has 3 clock control blocks for different subsystems of the chip. Signed-off-by:
-
Chanwoo Choi authored
This patch shows the correct information for debugging when fail to set clock rate because original error message shows the error value instead of current clock rate. Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Stephen Boyd authored
Having this Kconfig sourced outside the clk menu means the option is under the "Device Drivers" menu instead of the "Common Clock Framework" menu. Move it so that the bcm clock config options are in the right place. Cc: Alex Elder <elder@linaro.org> Signed-off-by: -
Stephen Boyd authored
drivers/clk/clk-u300.c:1175:13: warning: symbol 'u300_clk_init' was not declared. Should it be static? Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Stephen Boyd authored
drivers/clk/clk-moxart.c:18:13: warning: symbol 'moxart_of_pll_clk_init' was not declared. Should it be static? drivers/clk/clk-moxart.c:56:13: warning: symbol 'moxart_of_apb_clk_init' was not declared. Should it be static? Cc: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: -
Stephen Boyd authored
drivers/clk/clk-xgene.c:77:43: warning: incorrect type in argument 1 (different address spaces) drivers/clk/clk-xgene.c:77:43: expected void *csr drivers/clk/clk-xgene.c:77:43: got void [noderef] <asn:2>* ... drivers/clk/clk-xgene.c: In function ‘xgene_clk_enable’: drivers/clk/clk-xgene.c:237:3: warning: format ‘%LX’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘phys_addr_t’ [-Wformat] drivers/clk/clk-xgene.c:248:3: warning: format ‘%LX’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘phys_addr_t’ [-Wformat] Signed-off-by: -
Stephen Boyd authored
drivers/clk/mmp/clk-apbc.c:118:16: warning: symbol 'clk_apbc_ops' was not declared. Should it be static? drivers/clk/mmp/clk-apmu.c:64:16: warning: symbol 'clk_apmu_ops' was not declared. Should it be static? Cc: Chao Xie <chao.xie@marvell.com> Signed-off-by: -
Stephen Boyd authored
drivers/clk/socfpga/clk-periph.c:79:39: warning: Using plain integer as NULL pointer Cc: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: -
Stephen Boyd authored
drivers/clk/versatile/clk-sp810.c:159:29: error: incompatible types for operation (<=) drivers/clk/versatile/clk-sp810.c:159:29: left side has type char const *<noident> drivers/clk/versatile/clk-sp810.c:159:29: right side has type int drivers/clk/versatile/clk-sp810.c:159:53: error: incompatible types for operation (<=) drivers/clk/versatile/clk-sp810.c:159:53: left side has type char const *<noident> drivers/clk/versatile/clk-sp810.c:159:53: right side has type int drivers/clk/versatile/clk-sp810.c:138:13: warning: symbol 'clk_sp810_of_setup' was not declared. Should it be static? Acked: Pawel Moll <pawel.moll@arm.com> Signed-off-by: -
Stephen Boyd authored
drivers/clk/ti/clk.c:125:31: warning: incorrect type in return expression (different address spaces) drivers/clk/ti/clk.c:125:31: expected void [noderef] <asn:2>* drivers/clk/ti/clk.c:125:31: got void * drivers/clk/ti/clk.c:132:31: warning: incorrect type in return expression (different address spaces) drivers/clk/ti/clk.c:132:31: expected void [noderef] <asn:2>* drivers/clk/ti/clk.c:132:31: got void * drivers/clk/ti/dpll.c:180:14: warning: symbol '_get_reg' was not declared. Should it be static? drivers/clk/ti/fapll.c:624:32: warning: Using plain integer as NULL pointer drivers/clk/ti/fapll.c:625:31: warning: Using plain integer as NULL pointer drivers/clk/ti/fapll.c:630:40: warning: Using plain integer as NULL pointer drivers/clk/ti/clk-dra7-atl.c:158:22: warning: symbol 'atl_clk_ops' was not declared. Should it be static? drivers/clk/ti/clk-dra7-atl.c:170:39: warning: Using plain integer as NULL pointer Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
Stephen Boyd authored
drivers/clk/st/clkgen-mux.c:134:4: warning: symbol 'clkgena_divmux_get_parent' was not declared. Should it be static? drivers/clk/st/clkgen-mux.c:171:15: warning: symbol 'clkgena_divmux_recalc_rate' was not declared. Should it be static? drivers/clk/st/clkgen-mux.c:218:12: warning: symbol 'clk_register_genamux' was not declared. Should it be static? drivers/clk/st/clkgen-mux.c:388:13: warning: symbol 'st_of_clkgena_divmux_setup' was not declared. Should it be static? drivers/clk/st/clkgen-mux.c:488:13: warning: symbol 'st_of_clkgena_prediv_setup' was not declared. Should it be static? drivers/clk/st/clkgen-mux.c:625:13: warning: symbol 'st_of_clkgen_mux_setup' was not declared. Should it be static? drivers/clk/st/clkgen-mux.c:702:13: warning: symbol 'st_of_clkgen_vcc_setup' was not declared. Should it be static? drivers/clk/st/clkgen-pll.c:273:15: warning: symbol 'recalc_stm_pll800c65' was not declared. Should it be static? drivers/clk/st/clkgen-pll.c:300:15: warning: symbol 'recalc_stm_pll1600c65' was not declared. Should it be static? drivers/clk/st/clkgen-pll.c:324:15: warning: symbol 'recalc_stm_pll3200c32' was not declared. Should it be static? drivers/clk/st/clkgen-pll.c:346:15: warning: symbol 'recalc_stm_pll1200c32' was not declared. Should it be static? drivers/clk/st/clkgen-pll.c:565:19: warning: incorrect type in assignment (different address spaces) drivers/clk/st/clkgen-pll.c:565:19: expected void [noderef] <asn:2>*reg drivers/clk/st/clkgen-pll.c:565:19: got void * drivers/clk/st/clkgen-pll.c:576:18: warning: incorrect type in assignment (different address spaces) drivers/clk/st/clkgen-pll.c:576:18: expected void [noderef] <asn:2>*reg drivers/clk/st/clkgen-pll.c:576:18: got void * drivers/clk/st/clkgen-pll.c:693:53: warning: incorrect type in argument 2 (different address spaces) drivers/clk/st/clkgen-pll.c:693:53: expected void *[noderef] <asn:2>reg drivers/clk/st/clkgen-pll.c:693:53: got void [noderef] <asn:2>*[assigned] pll_base drivers/clk/st/clkgen-fsyn.c:495:5: warning: symbol 'clk_fs660c32_vco_get_rate' was not declared. Should it be static? drivers/clk/st/clkgen-fsyn.c:522:5: warning: symbol 'clk_fs660c32_vco_get_params' was not declared. Should it be static? drivers/clk/st/clk-flexgen.c:119:15: warning: symbol 'flexgen_recalc_rate' was not declared. Should it be static? drivers/clk/st/clk-flexgen.c:177:12: warning: symbol 'clk_register_flexgen' was not declared. Should it be static? drivers/clk/st/clk-flexgen.c:263:13: warning: symbol 'st_of_flexgen_setup' was not declared. Should it be static? Signed-off-by: -
Stephen Boyd authored
drivers/clk/socfpga/clk-gate.c:227:40: warning: Using plain integer as NULL pointer Cc: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: -
Stephen Boyd authored
These are __iomem pointers. Mark them appropriately so we don't get sparse errors like drivers/clk/sirf/clk-common.c:60:16: warning: incorrect type in argument 1 (different address spaces) drivers/clk/sirf/clk-common.c:60:16: expected void const volatile [noderef] <asn:2>*addr drivers/clk/sirf/clk-common.c:60:16: got void * Cc: Barry Song <Baohua.Song@csr.com> Signed-off-by: -
Stephen Boyd authored
drivers/clk/shmobile/clk-emev2.c:37:14: warning: symbol 'smu_base' was not declared. Should it be static? Cc: Takashi Yoshii <takasi-y@ops.dti.ne.jp> Cc: Magnus Damm <damm@opensource.se> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Stephen Boyd authored
drivers/clk/samsung/clk-exynos5260.c:138:40: warning: Using plain integer as NULL pointer drivers/clk/samsung/clk-exynos5260.c:328:40: warning: Using plain integer as NULL pointer drivers/clk/samsung/clk-exynos5260.c:392:40: warning: Using plain integer as NULL pointer drivers/clk/samsung/clk-exynos5260.c:494:40: warning: Using plain integer as NULL pointer drivers/clk/samsung/clk-exynos5260.c:583:40: warning: Using plain integer as NULL pointer drivers/clk/samsung/clk-exynos5260.c:644:40: warning: Using plain integer as NULL pointer drivers/clk/samsung/clk-exynos5260.c:779:40: warning: Using plain integer as NULL pointer drivers/clk/samsung/clk-exynos5260.c:898:40: warning: Using plain integer as NULL pointer drivers/clk/samsung/clk-exynos5260.c:962:40: warning: Using plain integer as NULL pointer drivers/clk/samsung/clk-exynos5260.c:1018:40: warning: Using plain integer as NULL pointer drivers/clk/samsung/clk-exynos5260.c:1165:40: warning: Using plain integer as NULL pointer drivers/clk/samsung/clk-exynos5260.c:1373:40: warning: Using plain integer as NULL pointer drivers/clk/samsung/clk-exynos5260.c:1829:40: warning: Using plain integer as NULL pointer Acked-by:
-
Stephen Boyd authored
drivers/clk/hisilicon/clk-hix5hd2.c:255:13: warning: symbol 'hix5hd2_clk_register_complex' was not declared. Should it be static? Acked-by:
-
Stephen Boyd authored
drivers/clk/berlin/berlin2-pll.c:94:12: warning: symbol 'berlin2_pll_register' was not declared. Should it be static? Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
-
