- 02 Jan, 2017 9 commits
-
-
Hans de Goede authored
usb_get_dr_mode() expects the device-property to be spelled "dr_mode" not "dr-mode". Spelling it properly fixes the following warning showing up in dmesg: [ 8704.500545] dwc3 dwc3.2.auto: Configuration mismatch. dr_mode forced to gadget Signed-off-by: Hans de Goede <hdegoede@redhat.com Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
-
Felipe Balbi authored
Now that we're handling so many transfers at a time and for some dwc3 revisions LPM events *must* be enabled, we can fall into a situation where too many events fire and we start receiving Overflow events. Let's do what XHCI does and allocate a full page for the Event Ring, this will avoid any future issues. Cc: <stable@vger.kernel.org> # v4.9 Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
-
Felipe Balbi authored
commit 0416e494 ("usb: dwc3: ep0: correct cache sync issue in case of ep0_bounced") introduced a bug where we would leak DMA resources which would cause us to starve the system of them resulting in failing DMA transfers. Fix the bug by making sure that we always unmap EP0 requests since those are *always* mapped. Fixes: 0416e494 ("usb: dwc3: ep0: correct cache sync issue in case of ep0_bounced") Cc: <stable@vger.kernel.org> Tested-by: Tomasz Medrek <tomaszx.medrek@intel.com> Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
-
Felipe Balbi authored
Let's call dwc3_ep0_prepare_one_trb() explicitly because there are occasions where we will need more than one TRB to handle an EP0 transfer. A follow-up patch will fix one bug related to multiple-TRB Data Phases when it comes to mapping/unmapping requests for DMA. Cc: <stable@vger.kernel.org> Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
-
Felipe Balbi authored
For now this is just a cleanup patch, no functional changes. We will be using the new function to fix a bug introduced long ago by commit 0416e494 ("usb: dwc3: ep0: correct cache sync issue in case of ep0_bounced") and further worsened by commit c0bd5456 ("usb: dwc3: ep0: handle non maxpacket aligned transfers > 512") Cc: <stable@vger.kernel.org> Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
-
Stefan Wahren authored
The current default for gadget DMA descriptor results on bcm2835 in a unnecessary error message: Invalid value 1 for param gadget-dma-desc So fix this by using hw->dma_desc_enable as default value. Fixes: dec4b556 ("usb: dwc2: gadget: Add descriptor DMA parameter") Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
-
Stefan Wahren authored
The current defaults for DMA results on a non-DMA platform in a unnecessary error message: Invalid value 0 for param gadget-dma So fix this by using dma_capable as default value. Fixes: 9962b62f ("usb: dwc2: Deprecate g-use-dma binding") Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
-
Stefan Wahren authored
According to the Devicetree ePAPR [1] the datatypes u8 and u16 are not defined. So using device_property_read_u16() would result in a partial read of a 32-bit big-endian integer which is not intended. So we better read the complete 32-bit value. This fixes a regression on bcm2835 where the values for g-rx-fifo-size and g-np-tx-fifo-size always read as zero: Invalid value 0 for param g-rx-fifo-size Invalid value 0 for param g-np-tx-fifo-size [1] - http://elinux.org/images/c/cf/Power_ePAPR_APPROVED_v1.1.pdf Fixes: 05ee799f ("usb: dwc2: Move gadget settings into core_params") Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
-
Stefan Wahren authored
Since commit "usb: dwc2: Improve handling of host and device hwparams" the host mode specific hardware parameter aren't initialized in peripheral mode from the register settings anymore. So we better do not set them in this case which avoids the following warnings on bcm2835: 256 invalid for host_nperio_tx_fifo_size. Check HW configuration. 512 invalid for host_perio_tx_fifo_size. Check HW configuration. Fixes: 55e1040e ("usb: dwc2: Improve handling of host and device hwparams") Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
-
- 01 Jan, 2017 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull DAX updates from Dan Williams: "The completion of Jan's DAX work for 4.10. As I mentioned in the libnvdimm-for-4.10 pull request, these are some final fixes for the DAX dirty-cacheline-tracking invalidation work that was merged through the -mm, ext4, and xfs trees in -rc1. These patches were prepared prior to the merge window, but we waited for 4.10-rc1 to have a stable merge base after all the prerequisites were merged. Quoting Jan on the overall changes in these patches: "So I'd like all these 6 patches to go for rc2. The first three patches fix invalidation of exceptional DAX entries (a bug which is there for a long time) - without these patches data loss can occur on power failure even though user called fsync(2). The other three patches change locking of DAX faults so that ->iomap_begin() is called in a more relaxed locking context and we are safe to start a transaction there for ext4" These have received a build success notification from the kbuild robot, and pass the latest libnvdimm unit tests. There have not been any -next releases since -rc1, so they have not appeared there" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: ext4: Simplify DAX fault path dax: Call ->iomap_begin without entry lock during dax fault dax: Finish fault completely when loading holes dax: Avoid page invalidation races and unnecessary radix tree traversals mm: Invalidate DAX radix tree entries only if appropriate ext2: Return BH_New buffers for zeroed blocks
-
- 30 Dec, 2016 2 commits
-
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "Two small fixes: - A merge error on my part broke the DocBook build. I've requisitioned one of tglx's frozen sharks for appropriate disciplinary action and resolved to be more careful about testing the DocBook stuff as long as it's still around. - Fix an error in unaligned-memory-access.txt" * tag 'docs-4.10-rc1-fix' of git://git.lwn.net/linux: Documentation/unaligned-memory-access.txt: fix incorrect comparison operator docs: Fix build failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a boot failure on some platforms when crypto self test is enabled along with the new acomp interface" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: testmgr - Use heap buffer for acomp test input
-
- 29 Dec, 2016 2 commits
-
-
Olof Johansson authored
mm/filemap.c: In function 'clear_bit_unlock_is_negative_byte': mm/filemap.c:933:9: error: too few arguments to function 'test_bit' return test_bit(PG_waiters); ^~~~~~~~ Fixes: b91e1302 ('mm: optimize PageWaiters bit use for unlock_page()') Signed-off-by: Olof Johansson <olof@lixom.net> Brown-paper-bag-by: Linus Torvalds <dummy@duh.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
In commit 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit") Nick Piggin made our page locking no longer unconditionally touch the hashed page waitqueue, which not only helps performance in general, but is particularly helpful on NUMA machines where the hashed wait queues can bounce around a lot. However, the "clear lock bit atomically and then test the waiters bit" sequence turns out to be much more expensive than it needs to be, because you get a nasty stall when trying to access the same word that just got updated atomically. On architectures where locking is done with LL/SC, this would be trivial to fix with a new primitive that clears one bit and tests another atomically, but that ends up not working on x86, where the only atomic operations that return the result end up being cmpxchg and xadd. The atomic bit operations return the old value of the same bit we changed, not the value of an unrelated bit. On x86, we could put the lock bit in the high bit of the byte, and use "xadd" with that bit (where the overflow ends up not touching other bits), and look at the other bits of the result. However, an even simpler model is to just use a regular atomic "and" to clear the lock bit, and then the sign bit in eflags will indicate the resulting state of the unrelated bit #7. So by moving the PageWaiters bit up to bit #7, we can atomically clear the lock bit and test the waiters bit on x86 too. And architectures with LL/SC (which is all the usual RISC suspects), the particular bit doesn't matter, so they are fine with this approach too. This avoids the extra access to the same atomic word, and thus avoids the costly stall at page unlock time. The only downside is that the interface ends up being a bit odd and specialized: clear a bit in a byte, and test the sign bit. Nick doesn't love the resulting name of the new primitive, but I'd rather make the name be descriptive and very clear about the limitation imposed by trying to work across all relevant architectures than make it be some generic thing that doesn't make the odd semantics explicit. So this introduces the new architecture primitive clear_bit_unlock_is_negative_byte(); and adds the trivial implementation for x86. We have a generic non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)" combination) which can be overridden by any architecture that can do better. According to Nick, Power has the same hickup x86 has, for example, but some other architectures may not even care. All these optimizations mean that my page locking stress-test (which is just executing a lot of small short-lived shell scripts: "make test" in the git source tree) no longer makes our page locking look horribly bad. Before all these optimizations, just the unlock_page() costs were just over 3% of all CPU overhead on "make test". After this, it's down to 0.66%, so just a quarter of the cost it used to be. (The difference on NUMA is bigger, but there this micro-optimization is likely less noticeable, since the big issue on NUMA was not the accesses to 'struct page', but the waitqueue accesses that were already removed by Nick's earlier commit). Acked-by: Nick Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 Dec, 2016 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a hash corruption bug in the marvell driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: marvell - Copy IVDIG before launching partial DMA ahash requests
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Various ipvlan fixes from Eric Dumazet and Mahesh Bandewar. The most important is to not assume the packet is RX just because the destination address matches that of the device. Such an assumption causes problems when an interface is put into loopback mode. 2) If we retry when creating a new tc entry (because we dropped the RTNL mutex in order to load a module, for example) we end up with -EAGAIN and then loop trying to replay the request. But we didn't reset some state when looping back to the top like this, and if another thread meanwhile inserted the same tc entry we were trying to, we re-link it creating an enless loop in the tc chain. Fix from Daniel Borkmann. 3) There are two different WRITE bits in the MDIO address register for the stmmac chip, depending upon the chip variant. Due to a bug we could set them both, fix from Hock Leong Kweh. 4) Fix mlx4 bug in XDP_TX handling, from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: stmmac: fix incorrect bit set in gmac4 mdio addr register r8169: add support for RTL8168 series add-on card. net: xdp: remove unused bfp_warn_invalid_xdp_buffer() openvswitch: upcall: Fix vlan handling. ipv4: Namespaceify tcp_tw_reuse knob net: korina: Fix NAPI versus resources freeing net, sched: fix soft lockup in tc_classify net/mlx4_en: Fix user prio field in XDP forward tipc: don't send FIN message from connectionless socket ipvlan: fix multicast processing ipvlan: fix various issues in ipvlan_process_multicast()
-
- 27 Dec, 2016 17 commits
-
-
Cihangir Akturk authored
In the actual implementation ether_addr_equal function tests for equality to 0 when returning. It seems in commit 0d74c4 it is somehow overlooked to change this operator to reflect the actual function. Signed-off-by: Cihangir Akturk <cakturk@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-
John Brooks authored
The 80211.tmpl DocBook file was removed in commit 819bf593 ("docs-rst: sphinxify 802.11 documentation"), but the 80211.xml target was re-added to the Makefile by commit 7ddedebb ("ALSA: doc: ReSTize writing-an-alsa-driver document"), leading to a failure when building the documentation: *** No rule to make target 'Documentation/DocBook/80211.xml', needed by 'Documentation/DocBook/80211.aux.xml'. cc: stable@vger.kernel.org Signed-off-by: John Brooks <john@fastquake.com> Mea-culpa-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-
Jonathan Corbet authored
Linux 4.10-rc1
-
Kweh, Hock Leong authored
Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of OR together with MII_WRITE. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chun-Hao Lin authored
This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
After commit 73b62bd0 ("virtio-net: remove the warning before XDP linearizing"), there's no users for bpf_warn_invalid_xdp_buffer(), so remove it. This is a revert for commit f23bc46c. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
pravin shelar authored
Networking stack accelerate vlan tag handling by keeping topmost vlan header in skb. This works as long as packet remains in OVS datapath. But during OVS upcall vlan header is pushed on to the packet. When such packet is sent back to OVS datapath, core networking stack might not handle it correctly. Following patch avoids this issue by accelerating the vlan tag during flow key extract. This simplifies datapath by bringing uniform packet processing for packets from all code paths. Fixes: 5108bbad ("openvswitch: add processing of L3 packets"). CC: Jarno Rajahalme <jarno@ovn.org> CC: Jiri Benc <jbenc@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
Different namespaces might have different requirements to reuse TIME-WAIT sockets for new connections. This might be required in cases where different namespace applications are in place which require TIME_WAIT socket connections to be reduced independently of the host. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Laura Abbott authored
Christopher Covington reported a crash on aarch64 on recent Fedora kernels: kernel BUG at ./include/linux/scatterlist.h:140! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 752 Comm: cryptomgr_test Not tainted 4.9.0-11815-ge93b1cc8 #162 Hardware name: linux,dummy-virt (DT) task: ffff80007c650080 task.stack: ffff800008910000 PC is at sg_init_one+0xa0/0xb8 LR is at sg_init_one+0x24/0xb8 ... [<ffff000008398db8>] sg_init_one+0xa0/0xb8 [<ffff000008350a44>] test_acomp+0x10c/0x438 [<ffff000008350e20>] alg_test_comp+0xb0/0x118 [<ffff00000834f28c>] alg_test+0x17c/0x2f0 [<ffff00000834c6a4>] cryptomgr_test+0x44/0x50 [<ffff0000080dac70>] kthread+0xf8/0x128 [<ffff000008082ec0>] ret_from_fork+0x10/0x50 The test vectors used for input are part of the kernel image. These inputs are passed as a buffer to sg_init_one which eventually blows up with BUG_ON(!virt_addr_valid(buf)). On arm64, virt_addr_valid returns false for the kernel image since virt_to_page will not return the correct page. Fix this by copying the input vectors to heap buffer before setting up the scatterlist. Reported-by: Christopher Covington <cov@codeaurora.org> Fixes: d7db7a88 ("crypto: acomp - update testmgr with support for acomp") Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jan Kara authored
Now that dax_iomap_fault() calls ->iomap_begin() without entry lock, we can use transaction starting in ext4_iomap_begin() and thus simplify ext4_dax_fault(). It also provides us proper retries in case of ENOSPC. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jan Kara authored
Currently ->iomap_begin() handler is called with entry lock held. If the filesystem held any locks between ->iomap_begin() and ->iomap_end() (such as ext4 which will want to hold transaction open), this would cause lock inversion with the iomap_apply() from standard IO path which first calls ->iomap_begin() and only then calls ->actor() callback which grabs entry locks for DAX (if it faults when copying from/to user provided buffers). Fix the problem by nesting grabbing of entry lock inside ->iomap_begin() - ->iomap_end() pair. Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jan Kara authored
The only case when we do not finish the page fault completely is when we are loading hole pages into a radix tree. Avoid this special case and finish the fault in that case as well inside the DAX fault handler. It will allow us for easier iomap handling. Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jan Kara authored
Currently dax_iomap_rw() takes care of invalidating page tables and evicting hole pages from the radix tree when write(2) to the file happens. This invalidation is only necessary when there is some block allocation resulting from write(2). Furthermore in current place the invalidation is racy wrt page fault instantiating a hole page just after we have invalidated it. So perform the page invalidation inside dax_iomap_actor() where we can do it only when really necessary and after blocks have been allocated so nobody will be instantiating new hole pages anymore. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jan Kara authored
Currently invalidate_inode_pages2_range() and invalidate_mapping_pages() just delete all exceptional radix tree entries they find. For DAX this is not desirable as we track cache dirtiness in these entries and when they are evicted, we may not flush caches although it is necessary. This can for example manifest when we write to the same block both via mmap and via write(2) (to different offsets) and fsync(2) then does not properly flush CPU caches when modification via write(2) was the last one. Create appropriate DAX functions to handle invalidation of DAX entries for invalidate_inode_pages2_range() and invalidate_mapping_pages() and wire them up into the corresponding mm functions. Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Jan Kara authored
So far we did not return BH_New buffers from ext2_get_blocks() when we allocated and zeroed-out a block for DAX inode to avoid racy zeroing in DAX code. This zeroing is gone these days so we can remove the workaround. Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Thomas Gleixner authored
If mce_device_init() fails then the mce device pointer is NULL and the AMD mce code happily dereferences it. Add a sanity check. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
The attempt to prevent overwriting an active state resulted in a disaster which effectively disables all dynamically allocated hotplug states. Cleanup the mess. Fixes: dc280d93 ("cpu/hotplug: Prevent overwriting of callbacks") Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 26 Dec, 2016 5 commits
-
-
Al Viro authored
Split asm-only parts of arm64 uaccess.h into a new header and use that from *.S. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Florian Fainelli authored
Commit beb0babf ("korina: disable napi on close and restart") introduced calls to napi_disable() that were missing before, unfortunately this leaves a small window during which NAPI has a chance to run, yet we just freed resources since korina_free_ring() has been called: Fix this by disabling NAPI first then freeing resource, and make sure that we also cancel the restart task before doing the resource freeing. Fixes: beb0babf ("korina: disable napi on close and restart") Reported-by: Alexandros C. Couloumbis <alex@ozo.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Shahar reported a soft lockup in tc_classify(), where we run into an endless loop when walking the classifier chain due to tp->next == tp which is a state we should never run into. The issue only seems to trigger under load in the tc control path. What happens is that in tc_ctl_tfilter(), thread A allocates a new tp, initializes it, sets tp_created to 1, and calls into tp->ops->change() with it. In that classifier callback we had to unlock/lock the rtnl mutex and returned with -EAGAIN. One reason why we need to drop there is, for example, that we need to request an action module to be loaded. This happens via tcf_exts_validate() -> tcf_action_init/_1() meaning after we loaded and found the requested action, we need to redo the whole request so we don't race against others. While we had to unlock rtnl in that time, thread B's request was processed next on that CPU. Thread B added a new tp instance successfully to the classifier chain. When thread A returned grabbing the rtnl mutex again, propagating -EAGAIN and destroying its tp instance which never got linked, we goto replay and redo A's request. This time when walking the classifier chain in tc_ctl_tfilter() for checking for existing tp instances we had a priority match and found the tp instance that was created and linked by thread B. Now calling again into tp->ops->change() with that tp was successful and returned without error. tp_created was never cleared in the second round, thus kernel thinks that we need to link it into the classifier chain (once again). tp and *back point to the same object due to the match we had earlier on. Thus for thread B's already public tp, we reset tp->next to tp itself and link it into the chain, which eventually causes the mentioned endless loop in tc_classify() once a packet hits the data path. Fix is to clear tp_created at the beginning of each request, also when we replay it. On the paths that can cause -EAGAIN we already destroy the original tp instance we had and on replay we really need to start from scratch. It seems that this issue was first introduced in commit 12186be7 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup"). Fixes: 12186be7 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup") Reported-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Tested-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
Larry Finger authored
I am getting the following warning when I build kernel 4.9-git on my PowerBook G4 with a 32-bit PPC processor: AS arch/powerpc/kernel/misc_32.o arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef] This problem is evident after commit 989cea5c ("kbuild: prevent lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an error that has been in the code since 2005 when this source file was created. That was with commit 9994a338 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S"). The offending line does not make a lot of sense. This error does not seem to cause any errors in the executable, thus I am not recommending that it be applied to any stable versions. Thanks to Nicholas Piggin for suggesting this solution. Fixes: 9994a338 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 25 Dec, 2016 1 commit
-
-
Linus Torvalds authored
The timer type simplifications caused a new gcc warning: drivers/base/power/domain.c: In function ‘genpd_runtime_suspend’: drivers/base/power/domain.c:562:14: warning: ‘time_start’ may be used uninitialized in this function [-Wmaybe-uninitialized] elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); despite the actual use of "time_start" not having changed in any way. It appears that simply changing the type of ktime_t from a union to a plain scalar type made gcc check the use. The variable wasn't actually used uninitialized, but gcc apparently failed to notice that the conditional around the use was exactly the same as the conditional around the initialization of that variable. Add an unnecessary initialization just to shut up the compiler. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-