INPUT_PROP_BUTTONPAD is currently only set through the platform data.
The RMI4 header doc says that this property is there to force the
buttonpad property, so we also need to detect it by looking at
the exported buttons count.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sound fixes from Takashi Iwai:
 "A few last-minute fixes for rc1:

   - ALSA core timer and sequencer fixes for bugs spotted by syzkaller

   - a couple of trivial HD-audio fixups

   - additional PCI / codec IDs for Intel Geminilake

   - fixes for CT-XFi DMA mask bugs"

* tag 'sound-fix-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: Fix link corruption by event error handling
  ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming
  ALSA: ctxfi: Fallback DMA mask to 32bit
  ALSA: timer: Reject user params with too small ticks
  ALSA: hda: Add Geminilake HDMI codec ID
  ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine
  ALSA: hda - Add Geminilake PCI ID

Pull thermal management updates from Zhang Rui:

 - add thermal driver for R-Car Gen3 thermal sensors.

 - add thermal driver for ZTE' zx2967 family thermal sensors.

 - convert thermal ID allocation from IDR to IDA.

 - fix a possible NULL dereference in imx thermal driver.

 - fix a ti-soc-thermal driver dependency issue so that critical thermal
   control is still available when CPU_THERMAL is not defined.

 - update binding information for QorIQ thermal driver.

 - a couple of cleanups in thermal core, intel_powerclamp, exynos,
   dra752-thermal, mtk-thermal driver.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  powerpc/mpc85xx: Update TMU device tree node for T1023/T1024
  powerpc/mpc85xx: Update TMU device tree node for T1040/T1042
  dt-bindings: Update QorIQ TMU thermal bindings
  thermal: mtk_thermal: Staticise a number of data variables
  thermal: arm: dra752: Remove all TSHUT related definitions
  thermal: arm: dra752: Remove TSHUT configuration
  thermal: ti-soc-thermal: Remove CPU_THERMAL Dependency from TI_THERMAL
  thermal: imx: Fix possible NULL dereference.
  thermal: exynos: Remove parsing unused samsung,tmu_cal_mode property
  thermal: zx2967: add thermal driver for ZTE's zx2967 family
  thermal: use cpumask_var_t for on-stack cpu masks
  dt: bindings: add documentation for zx2967 family thermal sensor
  thermal/intel_powerclamp: Remove set-but-not-used variables
  thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver
  thermal: rcar_gen3_thermal: Document the R-Car Gen3
  thermal: convert devfreq_cooling to use an IDA
  thermal: convert cpu_cooling to use an IDA
  thermal: convert clock cooling to use an IDA
  thermal core: convert ID allocation to IDA

Merge tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set contains mostly fixes to existing drivers as well as cleanup
  of code that's not been in active use for a while"

* tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (27 commits)
  acpi: lpss: call pwm_add_table() for BSW PWM device
  pwm: Try to load modules during pwm_get()
  pwm: Don't hold pwm_lookup_lock longer than necessary
  pwm: Make the PWM_POLARITY flag in DTB optional
  pwm: Print error messages with pr_err() instead of pr_debug()
  pwm: imx: Add polarity inversion support to i.MX's PWMv2
  pwm: imx: doc: Update imx-pwm.txt documentation entry
  pwm: imx: Remove redundant i.MX PWMv2 code
  pwm: imx: Provide atomic PWM support for i.MX PWMv2
  pwm: imx: Move PWMv2 wait for fifo slot code to a separate function
  pwm: imx: Move PWMv2 software reset code to a separate function
  pwm: imx: Rewrite v1 code to facilitate switch to atomic PWM
  pwm: imx: Add separate set of PWM ops for v1 and v2
  pwm: imx: Remove ipg clock and enable per clock when required
  pwm: lpss: Add Intel Gemini Lake PCI ID
  pwm: lpss: Do not export board infos for different PWM types
  pwm: lpss: Avoid reconfiguring while UPDATE bit is still enabled
  pwm: lpss: Switch to new atomic API
  pwm: lpss: Allow duty cycle to be 0
  pwm: lpss: Avoid potential overflow of base_unit
  ...

Pull drm AST2500 support from Dave Airlie:
 "This is a set of changes to enable the AST2500 BMC hardware, and also
  fix some bugs interacting with the older AST hardware.

  Some of the bug fixes are cc'ed to stable"

* tag 'drm-ast-2500-for-v4.11' of git://people.freedesktop.org/~airlied/linux:
  drm/ast: Call open_key before enable_mmio in POST code
  drm/ast: Fix test for VGA enabled
  drm/ast: POST code for the new AST2500
  drm/ast: Rename ast_init_dram_2300 to ast_post_chip_2300
  drm/ast: Factor mmc_test code in POST code
  drm/ast: Fixed vram size incorrect issue on POWER
  drm/ast: Base support for AST2500
  drm/ast: Fix calculation of MCLK
  drm/ast: Remove spurious include
  drm/ast: const'ify mode setting tables
  drm/ast: Handle configuration without P2A bridge
  drm/ast: Fix AST2400 POST failure without BMC FW or VBIOS

Pull drm fixes from Dave Airlie:
 "Misc fixes for v4.11-rc1.

  This is a selection of fixes for recent bugs, the vmwgfx one is
  important to avoid a regression, and compat ioctl one is pretty urgent
  for stable. Otherwise nothing too much.

  I've got a separate pull req for some AST hw IBM need to enable"

* tag 'drm-fixes-for-v4.11-rc1' of git://people.freedesktop.org/~airlied/linux:
  dma-buf: add support for compat ioctl
  drm/vmwgfx: Work around drm removal of control nodes
  drm/rockchip: cdn-dp: Fix error handling
  drm/rockchip: add extcon dependency for DP
  drm: zte: fix static checker warning on variable 'fmt'

Pull IPMI updates from Corey Minyard:
 "This is a few small fixes to the main IPMI driver, make some things
  const, fix typos, etc.

  The last patch came in about a week ago, but IMHO it's best to go in
  now. It is not for the main driver, it's for the bt-bmc driver, which
  runs on the managment controller side, not on the host side, so the
  scope is limited and the change is necessary"

* tag 'for-linus-4.11' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: bt-bmc: Use a regmap for register access
  char: ipmi: constify ipmi_smi_handlers structures
  acpi:ipmi: Make IPMI user handler const
  ipmi: make ipmi_usr_hndl const
  Documentation: Fix a typo in IPMI.txt.

Pull IDR rewrite from Matthew Wilcox:
 "The most significant part of the following is the patch to rewrite the
  IDR & IDA to be clients of the radix tree. But there's much more,
  including an enhancement of the IDA to be significantly more space
  efficient, an IDR & IDA test suite, some improvements to the IDR API
  (and driver changes to take advantage of those improvements), several
  improvements to the radix tree test suite and RCU annotations.

  The IDR & IDA rewrite had a good spin in linux-next and Andrew's tree
  for most of the last cycle. Coupled with the IDR test suite, I feel
  pretty confident that any remaining bugs are quite hard to hit. 0-day
  did a great job of watching my git tree and pointing out problems; as
  it hit them, I added new test-cases to be sure not to be caught the
  same way twice"

Willy goes on to expand a bit on the IDR rewrite rationale:
 "The radix tree and the IDR use very similar data structures.

  Merging the two codebases lets us share the memory allocation pools,
  and results in a net deletion of 500 lines of code. It also opens up
  the possibility of exposing more of the features of the radix tree to
  users of the IDR (and I have some interesting patches along those
  lines waiting for 4.12)

  It also shrinks the size of the 'struct idr' from 40 bytes to 24 which
  will shrink a fair few data structures that embed an IDR"

* 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax: (32 commits)
  radix tree test suite: Add config option for map shift
  idr: Add missing __rcu annotations
  radix-tree: Fix __rcu annotations
  radix-tree: Add rcu_dereference and rcu_assign_pointer calls
  radix tree test suite: Run iteration tests for longer
  radix tree test suite: Fix split/join memory leaks
  radix tree test suite: Fix leaks in regression2.c
  radix tree test suite: Fix leaky tests
  radix tree test suite: Enable address sanitizer
  radix_tree_iter_resume: Fix out of bounds error
  radix-tree: Store a pointer to the root in each node
  radix-tree: Chain preallocated nodes through ->parent
  radix tree test suite: Dial down verbosity with -v
  radix tree test suite: Introduce kmalloc_verbose
  idr: Return the deleted entry from idr_remove
  radix tree test suite: Build separate binaries for some tests
  ida: Use exceptional entries for small IDAs
  ida: Move ida_bitmap to a percpu variable
  Reimplement IDR and IDA using the radix tree
  radix-tree: Add radix_tree_iter_delete
  ...

Pull IOMMU fixes from Joerg Roedel:
 "Fix an issue introduced this merge window into the AMD and Intel IOMMU
  drivers that causes an oops when the vendor-specific sysfs-entries are
  accessed.

  The reason for this issue is that I forgot to update the sysfs code in
  the drivers when moving the iommu 'struct device' to the iommu-core"

* tag 'iommu-fix-v4.11-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix crash when accessing AMD-Vi sysfs entries
  iommu/vt-d: Fix crash when accessing VT-d sysfs entries

Pull nfsd updates from Bruce Fields:
 "The nfsd update this round is mainly a lot of miscellaneous cleanups
  and bugfixes.

  A couple changes could theoretically break working setups on upgrade.
  I don't expect complaints in practice, but they seem worth calling out
  just in case:

   - NFS security labels are now off by default; a new security_label
     export flag reenables it per export. But, having them on by default
     is a disaster, as it generally only makes sense if all your clients
     and servers have similar enough selinux policies. Thanks to Jason
     Tibbitts for pointing this out.

   - NFSv4/UDP support is off. It was never really supported, and the
     spec explicitly forbids it. We only ever left it on out of
     laziness; thanks to Jeff Layton for finally fixing that"

* tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux: (34 commits)
  nfsd: Fix display of the version string
  nfsd: fix configuration of supported minor versions
  sunrpc: don't register UDP port with rpcbind when version needs congestion control
  nfs/nfsd/sunrpc: enforce transport requirements for NFSv4
  sunrpc: flag transports as having congestion control
  sunrpc: turn bitfield flags in svc_version into bools
  nfsd: remove superfluous KERN_INFO
  nfsd: special case truncates some more
  nfsd: minor nfsd_setattr cleanup
  NFSD: Reserve adequate space for LOCKT operation
  NFSD: Get response size before operation for all RPCs
  nfsd/callback: Drop a useless data copy when comparing sessionid
  nfsd/callback: skip the callback tag
  nfsd/callback: Cleanup callback cred on shutdown
  nfsd/idmap: return nfserr_inval for 0-length names
  SUNRPC/Cache: Always treat the invalid cache as unexpired
  SUNRPC: Drop all entries from cache_detail when cache_purge()
  svcrdma: Poll CQs in "workqueue" mode
  svcrdma: Combine list fields in struct svc_rdma_op_ctxt
  svcrdma: Remove unused sc_dto_q field
  ...

Pull ceph updates from Ilya Dryomov:
 "This time around we have:

   - support for rbd data-pool feature, which enables rbd images on
     erasure-coded pools (myself). CEPH_PG_MAX_SIZE has been bumped to
     allow erasure-coded profiles with k+m up to 32.

   - a patch for ceph_d_revalidate() performance regression introduced
     in 4.9, along with some cleanups in the area (Jeff Layton)

   - a set of fixes for unsafe ->d_parent accesses in CephFS (Jeff
     Layton)

   - buffered reads are now processed in rsize windows instead of rasize
     windows (Andreas Gerstmayr). The new default for rsize mount option
     is 64M.

   - ack vs commit distinction is gone, greatly simplifying ->fsync()
     and MOSDOpReply handling code (myself)

  ... also a few filesystem bug fixes from Zheng, a CRUSH sync up (CRUSH
  computations are still serialized though) and several minor fixes and
  cleanups all over"

* tag 'ceph-for-4.11-rc1' of git://github.com/ceph/ceph-client: (52 commits)
  libceph, rbd, ceph: WRITE | ONDISK -> WRITE
  libceph: get rid of ack vs commit
  ceph: remove special ack vs commit behavior
  ceph: tidy some white space in get_nonsnap_parent()
  crush: fix dprintk compilation
  crush: do is_out test only if we do not collide
  ceph: remove req from unsafe list when unregistering it
  rbd: constify device_type structure
  rbd: kill obj_request->object_name and rbd_segment_name_cache
  rbd: store and use obj_request->object_no
  rbd: RBD_V{1,2}_DATA_FORMAT macros
  rbd: factor out __rbd_osd_req_create()
  rbd: set offset and length outside of rbd_obj_request_create()
  rbd: support for data-pool feature
  rbd: introduce rbd_init_layout()
  rbd: use rbd_obj_bytes() more
  rbd: remove now unused rbd_obj_request_wait() and helpers
  rbd: switch rbd_obj_method_sync() to ceph_osdc_call()
  libceph: pass reply buffer length through ceph_osdc_call()
  rbd: do away with obj_request in rbd_obj_read_sync()
  ...

The sequencer FIFO management has a bug that may lead to a corruption
(shortage) of the cell linked list.  When a sequencer client faces an
error at the event delivery, it tries to put back the dequeued cell.
When the first queue was put back, this forgot the tail pointer
tracking, and the link will be screwed up.

Although there is no memory corruption, the sequencer client may stall
forever at exit while flushing the pending FIFO cells in
snd_seq_pool_done(), as spotted by syzkaller.

This patch addresses the missing tail pointer tracking at
snd_seq_fifo_cell_putback().  Also the patch makes sure to clear the
cell->enxt pointer at snd_seq_fifo_event_in() for avoiding a similar
mess-up of the FIFO linked list.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull ARM updates from Russell King:

 - nommu updates from Afzal Mohammed cleaning up the vectors support

 - allow DMA memory "mapping" for nommu Benjamin Gaignard

 - fixing a correctness issue with R_ARM_PREL31 relocations in the
   module linker

 - add strlen() prototype for the decompressor

 - support for DEBUG_VIRTUAL from Florian Fainelli

 - adjusting memory bounds after memory reservations have been
   registered

 - unipher cache handling updates from Masahiro Yamada

 - initrd and Thumb Kconfig cleanups

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits)
  ARM: mm: round the initrd reservation to page boundaries
  ARM: mm: clean up initrd initialisation
  ARM: mm: move initrd init code out of arm_memblock_init()
  ARM: 8655/1: improve NOMMU definition of pgprot_*()
  ARM: 8654/1: decompressor: add strlen prototype
  ARM: 8652/1: cache-uniphier: clean up active way setup code
  ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h>
  ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly
  ARM: 8649/2: nommu: remove Hivecs configuration is asm
  ARM: 8648/2: nommu: display vectors base
  ARM: 8647/2: nommu: dynamic exception base address setting
  ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig
  ARM: 8644/1: Reduce "CPU: shutdown" message to debug level
  ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol
  ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL
  ARM: 8639/1: Define KERNEL_START and KERNEL_END
  ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_
  ARM: 8637/1: Adjust memory boundaries after reservations
  ARM: 8636/1: Cleanup sanity_check_meminfo
  ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support
  ...

Pull x86 fixes from Ingo Molnar:
 "Two documentation updates, plus a debugging annotation fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/crash: Update the stale comment in reserve_crashkernel()
  x86/irq, trace: Add __irq_entry annotation to x86's platform IRQ handlers
  Documentation, x86, resctrl: Recommend locking for resctrlfs

Pull scheduler fixes from Ingo Molnar:
 "Two rq-clock warnings related fixes, plus a cgroups related crash fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cgroup: Move sched_online_group() back into css_online() to fix crash
  sched/fair: Update rq clock before changing a task's CPU affinity
  sched/core: Fix update_rq_clock() splat on hotplug (and suspend/resume)

Pull perf fixes from Ingo Molnar:
 "Misc fixes on the kernel and tooling side - nothing in particular
  stands out"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf/core: Fix the perf_cpu_time_max_percent check
  perf/core: Fix perf_event_enable_on_exec() timekeeping (again)
  perf/core: Remove confusing comment and move put_ctx()
  perf record: Honor --quiet option properly
  perf annotate: Add -q/--quiet option
  perf diff: Add -q/--quiet option
  perf report: Add -q/--quiet option
  perf utils: Check verbose flag properly
  perf utils: Add perf_quiet_option()
  perf record: Add -a as default target
  perf stat: Add -a as default target
  perf tools: Fail on using multiple bits long terms without value
  perf tools: Move new_term arguments into struct parse_events_term template
  perf build: Add special fixdep cleaning rule
  perf tools: Replace _SC_NPROCESSORS_CONF with max_present_cpu in cpu_topology_map
  perf header: Make build_cpu_topology skip offline/absent CPUs
  perf cpumap: Add cpu__max_present_cpu()
  perf session: Fix DEBUG=1 build with clang
  tools lib traceevent: It's preempt not prempt
  perf python: Filter out -specs=/a/b/c from the python binding cc options
  ...

Pull locking fixes from Ingo Molnar:
 "The main change is the uninlining of large refcount_t APIs, plus a
  header dependency fix.

  Note that the uninlining allowed us to enable the underflow/overflow
  warnings unconditionally and remove the debug Kconfig switch: this
  might trigger new warnings in buggy code and turn
  crashes/use-after-free bugs into less harmful memory leaks"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/refcounts: Add missing kernel.h header to have UINT_MAX defined
  locking/refcounts: Out-of-line everything

Pull objtool fixes from Ingo Molnar:
 "A handful of objtool fixes related to unreachable code, plus a build
  fix for out of tree modules"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Enclose contents of unreachable() macro in a block
  objtool: Prevent GCC from merging annotate_unreachable()
  objtool: Improve detection of BUG() and other dead ends
  objtool: Fix CONFIG_STACK_VALIDATION=y warning for out-of-tree modules

Pull IDE updates from David Miller:
 "Just one actual change here this time around, adding some init data
  annotations. The other change was bogus and got reverted"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: palm_bk3710: add __initdata to palm_bk3710_port_info
  Revert "ide: Fix interface autodetection in legacy IDE driver (trial #2)"
  ide: Fix interface autodetection in legacy IDE driver (trial #2)

Pull networking fixes from David Miller:

 1) Don't save TIPC header values before the header has been validated,
    from Jon Paul Maloy.

 2) Fix memory leak in RDS, from Zhu Yanjun.

 3) We miss to initialize the UID in the flow key in some paths, from
    Julian Anastasov.

 4) Fix latent TOS masking bug in the routing cache removal from years
    ago, also from Julian.

 5) We forget to set the sockaddr port in sctp_copy_local_addr_list(),
    fix from Xin Long.

 6) Missing module ref count drop in packet scheduler actions, from
    Roman Mashak.

 7) Fix RCU annotations in rht_bucket_nested, from Herbert Xu.

 8) Fix use after free which happens because L2TP's ipv4 support returns
    non-zero values from it's backlog_rcv function which ipv4 interprets
    as protocol values. Fix from Paul Hüber.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  qed: Don't use attention PTT for configuring BW
  qed: Fix race with multiple VFs
  l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv
  xfrm: provide correct dst in xfrm_neigh_lookup
  rhashtable: Fix RCU dereference annotation in rht_bucket_nested
  rhashtable: Fix use before NULL check in bucket_table_free
  net sched actions: do not overwrite status of action creation.
  rxrpc: Kernel calls get stuck in recvmsg
  net sched actions: decrement module reference count after table flush.
  lib: Allow compile-testing of parman
  ipv6: check sk sk_type and protocol early in ip_mroute_set/getsockopt
  sctp: set sin_port for addr param when checking duplicate address
  net/mlx4_en: fix overflow in mlx4_en_init_timestamp()
  netfilter: nft_set_bitmap: incorrect bitmap size
  net: s2io: fix typo argumnet argument
  net: vxge: fix typo argumnet argument
  netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.
  ipv4: mask tos for input route
  ipv4: add missing initialization for flowi4_uid
  lib: fix spelling mistake: "actualy" -> "actually"
  ...

Dell Inspiron 17 7000 Gaming laptop needs a similar quirk like
Inspiron 7599 to support its subwoofer speaker.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194191
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently ctxfi driver tries to set only the 64bit DMA mask on 64bit
architectures, and bails out if it fails.  This causes a problem on
some platforms since the 64bit DMA isn't always guaranteed.  We should
fall back to the default 32bit DMA when 64bit DMA fails.

Fixes: 6d74b86d ("ALSA: ctxfi - Allow 64bit DMA")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The link between the iommu sysfs-device and the struct
amd_iommu is no longer stored as driver-data. Update the
code to the new correct way of getting from device to
amd_iommu.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 39ab9555 ('iommu: Add sysfs bindings for struct iommu_device')
Signed-off-by: Joerg Roedel <jroedel@suse.de>

The link between the iommu sysfs-device and the struct
intel_iommu is no longer stored as driver-data. Update the
code to use the new access method.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 39ab9555 ('iommu: Add sysfs bindings for struct iommu_device')
Signed-off-by: Joerg Roedel <jroedel@suse.de>

When a user sets a too small ticks with a fine-grained timer like
hrtimer, the kernel tries to fire up the timer irq too frequently.
This may lead to the condensed locks, eventually the kernel spinlock
lockup with warnings.

For avoiding such a situation, we define a lower limit of the
resolution, namely 1ms.  When the user passes a too small tick value
that results in less than that, the kernel returns -EINVAL now.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branches 'fixes' and 'misc'; commit 'kuser^{/add CPU_THUMB_CAPABLE to indicate}' into for-linus

Round the initrd memblock reservation to page boundaries to prevent
other data sharing the initrd pages.  This prevents an allocation
possibly overlapping with the initrd, which would later get trampled
on in free_initrd_mem().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Rather than repeatedly testing phys_initrd_size to see if the initrd
is still enabled, return from the new function to avoid executing the
remaining initialisation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Move the ARM initrd initialisation code out of arm_memblock_init() into
its own function, so it can be cleaned up.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The tegra DRM driver produces a harmless warning when built for NOMMU:

drivers/gpu/drm/tegra/gem.c: In function 'tegra_drm_mmap':
drivers/gpu/drm/tegra/gem.c:508:12: unused variable 'prot'

This is because pgprot_writecombine() on ARM returns a constant and
ignores its argument. The version in asm-generic doesn't have that
problem, so let's use that one instead. We don't actually care
about the value on NOMMU, and this is consistent with what some
other architectures do.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The decompress.c file contains a declaration for strstr() so we can
include some compression library code.

With the updated LZ4 implementation, we run into the same problem again
for strlen():

In file included from ../include/linux/rcupdate.h:40:0,
                 from ../include/linux/srcu.h:33,
                 from ../include/linux/notifier.h:15,
                 from ../include/linux/memory_hotplug.h:6,
                 from ../include/linux/mmzone.h:749,
                 from ../include/linux/gfp.h:5,
                 from ../include/linux/kmod.h:22,
                 from ../include/linux/module.h:13,
                 from ../arch/arm/boot/compressed/../../../../lib/lz4/lz4_decompress.c:39,
                 from ../arch/arm/boot/compressed/../../../../lib/decompress_unlz4.c:13,
                 from ../arch/arm/boot/compressed/decompress.c:55:
include/linux/cpumask.h: In function 'cpumask_parse':
include/linux/cpumask.h:592:53: error: implicit declaration of function 'strlen';did you mean 'strstr'? [-Werror=implicit-function-declaration]

This adds another declaration to work around the new problem.

Fixes: ce83d9ab80d6 ("lib: update LZ4 compressor module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Now, the active way setup function is called with a fixed value zero
for the second argument.  The code can be simpler.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Nothing in this header file depends on <linux/types.h>.
Rather, <linux/errno.h> should be included for -ENODEV.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

According to the spec 'ELF for the ARM Architecture' (IHI 0044E),
addends for R_ARM_PREL31 relocations are 31-bit signed quantities,
so we need to sign extend the value to 32 bits before it can be used
as an offset in the calculation of the relocated value.

We have not been bitten by this because these relocations are usually
emitted against the start of a section, which means the addends never
assume negative values in practice. But it is a bug nonetheless, so fix
it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Now that exception based address is handled dynamically for
processors with CP15, remove Hivecs configuration in assembly.
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

VECTORS_BASE displays the exception base address. Now on no-MMU as
the exception base address is dynamically estimated, define
VECTORS_BASE to the variable holding it.

As it is the case, limit VECTORS_BASE constant definition to MMU.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

No-MMU dynamic exception base address configuration on CP15
processors. In the case of low vectors, decision based on whether
security extensions are enabled & whether remap vectors to RAM
CONFIG option is selected.

For no-MMU without CP15, current default value of 0x0 is retained.
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

For MMU configurations, VECTORS_BASE is always 0xffff0000, a macro
definition will suffice.

For no-MMU, exception base address is dynamically determined in
subsequent patches. To preserve bisectability, now make the
macro applicable for no-MMU scenario too.

Thanks to 0-DAY kernel test infrastructure that found the
bisectability issue. This macro will be restricted to MMU case upon
dynamically determining exception base address for no-MMU.

Once exception address is handled dynamically for no-MMU,
VECTORS_BASE can be removed from Kconfig.
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Similar to c68b0274 ("ARM: reduce "Booted secondary processor"
message to debug level"), demote the "CPU: shutdown" pr_notice() into a
pr_debug().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

All low-level PM/SMP code using virt_to_phys() should actually use
__pa_symbol() against kernel symbols. Update code where relevant to move
away from virt_to_phys().
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>