Dan points out that if ieee80211_chandef_he_6ghz_oper() succeeds,
we don't initialize 'ret'. Initialize it to 0 in this case, since
everything went fine and nothing has to be disabled.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 57fa5e85 ("mac80211: determine chandef from HE 6 GHz operation")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200603111500.bd2a5ff37b83.I2c3f338ce343b581db493eb9a0d988d1b626c8fb@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Lockdep reports that we may deadlock because we take the RTNL on
the work struct, but flush it under RTNL. Clearly, it's correct.
In practice, this can happen when doing rfkill on an active device.

Fix this by moving the work struct to the wiphy (registered dev)
layer, and iterate over all the wdevs inside there. This then
means we need to track which one of them has work to do, so we
don't update to the driver for all wdevs all the time.

Also fix a locking bug I noticed while working on this - the
registrations list is iterated as if it was an RCU list, but it
isn't handle that way - and we need to lock now for the update
flag anyway, so remove the RCU.

Fixes: 6cd536fe ("cfg80211: change internal management frame registration API")
Reported-by: Markus Theil <markus.theil@tu-ilmenau.de>
Reported-and-tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20200604120420.b1dc540a7e26.I55dcca56bb5bdc5d7ad66a36a0b42afd7034d8be@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

If register_netdev(dev) fails, free_netdev(dev) needs
to be called, otherwise a memory leak will occur.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Corrected the MAC_CR configuration bits for 1 GBit operation. The data
sheet allows MAC_CR(2:1) to be 10 and also 11 for 1 GBit/s speed, but
only 10 works correctly.

Devices tested:
Microchip Lan7431, fixed-phy mode
Microchip Lan7430, normal phy mode

Fixes: 6f197fb6 ("lan743x: Added fixed link and RGMII support")
Signed-off-by: Roelof Berg <rberg@berg-solutions.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sch_generic.h does not need to be included, remove it.
Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Signed-off-by: David S. Miller <davem@davemloft.net>

Th referenced change added an extra hw reset to rtl8169_net_suspend()
what makes WoL fail on few chip versions. Therefore skip the extra
reset if we're going down and WoL is enabled.
In rtl_shutdown() rtl8169_hw_reset() is called by rtl8169_net_suspend()
already if needed, therefore avoid issues issue by removing the extra
call. The fix was tested on a system with RTL8168g.

Meanwhile rtl8169_hw_reset() does more than a hw reset and should be
renamed. But that's net-next material.

Fixes: 8ac8e8c6 ("r8169: make rtl8169_down central chip quiesce function")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code is return PTR_ERR(NULL) which is zero or success.  We should
return -ENOMEM instead.

Fixes: 94abdad6 ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The u64_stats mechanism uses sequence counters to protect against 64-bit
values tearing on 32-bit architectures. Updating u64_stats is thus a
sequence counter write side critical section where preemption must be
disabled.

For mdiobus_stats_acct(), disable preemption upon the u64_stats update.
It is called from process context through mdiobus_read() and
mdiobus_write().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The u64_stats mechanism uses sequence counters to protect against 64-bit
values tearing on 32-bit architectures. Updating such statistics is a
sequence counter write side critical section.

Preemption must be disabled before entering this seqcount write critical
section.  Failing to do so, the seqcount read side can preempt the write
side section and spin for the entire scheduler tick.  If that reader
belongs to a real-time scheduling class, it can spin forever and the
kernel will livelock.

Document this statistics update side non-preemptibility requirement.

Reword the introductory paragraph to highlight u64_stats raison d'être:
64-bit values tearing protection on 32-bit architectures. Divide
documentation on a basis of internal design vs. usage constraints.

Reword the u64_stats header file top comment to always mention "Reader"
or "Writer" at the start of each bullet point, making it easier to
follow which side each point is actually for.

Clarify the statement "whole thing is a NOOP on 64bit arches or UP
kernels".  For 32-bit UP kernels, preemption is always disabled for the
statistics read side section.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit bf7afb29 ("phy: improve safety of fixed-phy MII register
reading") protected the fixed PHY status with a sequence counter.

Two years later, commit d2b97793 ("net: phy: fixed-phy: remove
fixed_phy_update_state()") removed the sequence counter's write side
critical section -- neutralizing its read side retry loop.

Remove the unused seqcount.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sequence counters write paths are critical sections that must never be
preempted, and blocking, even for CONFIG_PREEMPTION=n, is not allowed.

Commit 5dbe7c17 ("net: fix kernel deadlock with interface rename and
netdev name retrieval.") handled a deadlock, observed with
CONFIG_PREEMPTION=n, where the devnet_rename seqcount read side was
infinitely spinning: it got scheduled after the seqcount write side
blocked inside its own critical section.

To fix that deadlock, among other issues, the commit added a
cond_resched() inside the read side section. While this will get the
non-preemptible kernel eventually unstuck, the seqcount reader is fully
exhausting its slice just spinning -- until TIF_NEED_RESCHED is set.

The fix is also still broken: if the seqcount reader belongs to a
real-time scheduling policy, it can spin forever and the kernel will
livelock.

Disabling preemption over the seqcount write side critical section will
not work: inside it are a number of GFP_KERNEL allocations and mutex
locking through the drivers/base/ :: device_rename() call chain.

>From all the above, replace the seqcount with a rwsem.

Fixes: 5dbe7c17 (net: fix kernel deadlock with interface rename and netdev name retrieval.)
Fixes: 30e6c9fa (net: devnet_rename_seq should be a seqcount)
Fixes: c91f6df2 (sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name)
Cc: <stable@vger.kernel.org>
Reported-by: kbuild test robot <lkp@intel.com> [ v1 missing up_read() on error exit ]
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [ v1 missing up_read() on error exit ]
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 7e99e347 ("net: dsa: remove dsa_switch_alloc helper")
replaced the dsa_switch_alloc helper by devm_kzalloc in all DSA
drivers. Unfortunately it introduced a typo in qca8k.c driver and
wrong argument is passed to the devm_kzalloc function.

This fix mitigates the following kernel exception:

  Unexpected gfp: 0x6 (__GFP_HIGHMEM|GFP_DMA32). Fixing up to gfp: 0x101 (GFP_DMA|__GFP_ZERO). Fix your code!
  CPU: 1 PID: 44 Comm: kworker/1:1 Not tainted 5.5.9-yocto-ua #1
  Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  Workqueue: events deferred_probe_work_func
  [<c0014924>] (unwind_backtrace) from [<c00123bc>] (show_stack+0x10/0x14)
  [<c00123bc>] (show_stack) from [<c04c8fb4>] (dump_stack+0x90/0xa4)
  [<c04c8fb4>] (dump_stack) from [<c00e1b10>] (new_slab+0x20c/0x214)
  [<c00e1b10>] (new_slab) from [<c00e1cd0>] (___slab_alloc.constprop.0+0x1b8/0x540)
  [<c00e1cd0>] (___slab_alloc.constprop.0) from [<c00e2074>] (__slab_alloc.constprop.0+0x1c/0x24)
  [<c00e2074>] (__slab_alloc.constprop.0) from [<c00e4538>] (__kmalloc_track_caller+0x1b0/0x298)
  [<c00e4538>] (__kmalloc_track_caller) from [<c02cccac>] (devm_kmalloc+0x24/0x70)
  [<c02cccac>] (devm_kmalloc) from [<c030d888>] (qca8k_sw_probe+0x94/0x1ac)
  [<c030d888>] (qca8k_sw_probe) from [<c0304788>] (mdio_probe+0x30/0x54)
  [<c0304788>] (mdio_probe) from [<c02c93bc>] (really_probe+0x1e0/0x348)
  [<c02c93bc>] (really_probe) from [<c02c9884>] (driver_probe_device+0x60/0x16c)
  [<c02c9884>] (driver_probe_device) from [<c02c7fb0>] (bus_for_each_drv+0x70/0x94)
  [<c02c7fb0>] (bus_for_each_drv) from [<c02c9708>] (__device_attach+0xb4/0x11c)
  [<c02c9708>] (__device_attach) from [<c02c8148>] (bus_probe_device+0x84/0x8c)
  [<c02c8148>] (bus_probe_device) from [<c02c8cec>] (deferred_probe_work_func+0x64/0x90)
  [<c02c8cec>] (deferred_probe_work_func) from [<c0033c14>] (process_one_work+0x1d4/0x41c)
  [<c0033c14>] (process_one_work) from [<c00340a4>] (worker_thread+0x248/0x528)
  [<c00340a4>] (worker_thread) from [<c0039148>] (kthread+0x124/0x150)
  [<c0039148>] (kthread) from [<c00090d8>] (ret_from_fork+0x14/0x3c)
  Exception stack(0xee1b5fb0 to 0xee1b5ff8)
  5fa0:                                     00000000 00000000 00000000 00000000
  5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
  qca8k 2188000.ethernet-1:0a: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!
  qca8k 2188000.ethernet-1:0a eth2 (uninitialized): PHY [2188000.ethernet-1:01] driver [Generic PHY]
  qca8k 2188000.ethernet-1:0a eth1 (uninitialized): PHY [2188000.ethernet-1:02] driver [Generic PHY]

Fixes: 7e99e347 ("net: dsa: remove dsa_switch_alloc helper")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the geneve interface is in collect_md (external) mode, it can't send any
packets submitted directly to its net interface, as such packets won't have
metadata attached. This is expected.

However, the kernel itself sends some packets to the interface, most
notably, IPv6 DAD, IPv6 multicast listener reports, etc. This is not wrong,
as tunnel metadata can be specified in routing table (although technically,
that has never worked for IPv6, but hopefully will be fixed eventually) and
then the interface must correctly participate in IPv6 housekeeping.

The problem is that any such attempt increases the tx_error counter. Just
bringing up a geneve interface with IPv6 enabled is enough to see a number
of tx_errors. That causes confusion among users, prompting them to find
a network error where there is none.

Change the counter used to tx_dropped. That better conveys the meaning
(there's nothing wrong going on, just some packets are getting dropped) and
hopefully will make admins panic less.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sameeh Jubran says:

====================
Fix xdp in ena driver

This patchset includes 2 XDP related bug fixes

Difference from v1:
* Fixed "Fixes" tag
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes two issues with XDP:

1. If the XDP verdict is XDP_ABORTED we break the loop, which results in
   us handling one buffer per napi cycle instead of the total budget
   (usually 64). To overcome this simply change the xdp_verdict check to
   != XDP_PASS. When the verdict is XDP_PASS, the skb is not expected to
   be NULL.

2. Update the residual budget for XDP_DROP and XDP_ABORTED, since
   packets are handled in these cases.

Fixes: 548c4940 ("net: ena: Implement XDP_TX action")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When sending very high packet rate, the XDP tx queues can get full and
start dropping packets. In this case we don't free the pages which
results in ena driver draining the system memory.

Fix:
Simply free the pages when necessary.

Fixes: 548c4940 ("net: ena: Implement XDP_TX action")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The seg6_validate_srh() is used to validate SRH for three cases:

case1: SRH of data-plane SRv6 packets to be processed by the Linux kernel.
Case2: SRH of the netlink message received  from user-space (iproute2)
Case3: SRH injected into packets through setsockopt

In case1, the SRH can be encoded in the Reduced way (i.e., first SID is
carried in DA only and not represented as SID in the SRH) and the
seg6_validate_srh() now handles this case correctly.

In case2 and case3, the SRH shouldn’t be encoded in the Reduced way
otherwise we lose the first segment (i.e., the first hop).

The current implementation of the seg6_validate_srh() allow SRH of case2
and case3 to be encoded in the Reduced way. This leads a slab-out-of-bounds
problem.

This patch verifies SRH of case1, case2 and case3. Allowing case1 to be
reduced while preventing SRH of case2 and case3 from being reduced .

Reported-by: syzbot+e8c028b62439eac42073@syzkaller.appspotmail.com
Reported-by: YueHaibing <yuehaibing@huawei.com>
Fixes: 0cb7498f ("seg6: fix SRH processing to comply with RFC8754")
Signed-off-by: Ahmed Abdelsalam <ahabdels@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot found the following crash:

general protection fault, probably for non-canonical address 0xdffffc0000000019: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf]
CPU: 1 PID: 7060 Comm: syz-executor394 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__tipc_sendstream+0xbde/0x11f0 net/tipc/socket.c:1591
Code: 00 00 00 00 48 39 5c 24 28 48 0f 44 d8 e8 fa 3e db f9 48 b8 00 00 00 00 00 fc ff df 48 8d bb c8 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 e2 04 00 00 48 8b 9b c8 00 00 00 48 b8 00 00 00
RSP: 0018:ffffc90003ef7818 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8797fd9d
RDX: 0000000000000019 RSI: ffffffff8797fde6 RDI: 00000000000000c8
RBP: ffff888099848040 R08: ffff88809a5f6440 R09: fffffbfff1860b4c
R10: ffffffff8c305a5f R11: fffffbfff1860b4b R12: ffff88809984857e
R13: 0000000000000000 R14: ffff888086aa4000 R15: 0000000000000000
FS:  00000000009b4880(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000140 CR3: 00000000a7fdf000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 tipc_sendstream+0x4c/0x70 net/tipc/socket.c:1533
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x32f/0x810 net/socket.c:2352
 ___sys_sendmsg+0x100/0x170 net/socket.c:2406
 __sys_sendmmsg+0x195/0x480 net/socket.c:2496
 __do_sys_sendmmsg net/socket.c:2525 [inline]
 __se_sys_sendmmsg net/socket.c:2522 [inline]
 __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2522
 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
 entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x440199
...

This bug was bisected to commit 0a3e060f ("tipc: add test for Nagle
algorithm effectiveness"). However, it is not the case, the trouble was
from the base in the case of zero data length message sending, we would
unexpectedly make an empty 'txq' queue after the 'tipc_msg_append()' in
Nagle mode.

A similar crash can be generated even without the bisected patch but at
the link layer when it accesses the empty queue.

We solve the issues by building at least one buffer to go with socket's
header and an optional data section that may be empty like what we had
with the 'tipc_msg_build()'.

Note: the previous commit 4c21daae ("tipc: Fix NULL pointer
dereference in __tipc_sendstream()") is obsoleted by this one since the
'txq' will be never empty and the check of 'skb != NULL' is unnecessary
but it is safe anyway.

Reported-by: syzbot+8eac6d030e7807c21d32@syzkaller.appspotmail.com
Fixes: c0bceb97 ("tipc: add smart nagle feature")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two kinds of memory leaks in genl_family_rcv_msg_dumpit():

1. Before we call ops->start(), whenever an error happens, we forget
   to free the memory allocated in genl_family_rcv_msg_dumpit().

2. When ops->start() fails, the 'info' has been already installed on
   the per socket control block, so we should not free it here. More
   importantly, nlk->cb_running is still false at this point, so
   netlink_sock_destruct() cannot free it either.

The first kind of memory leaks is easier to resolve, but the second
one requires some deeper thoughts.

After reviewing how netfilter handles this, the most elegant solution
I find is just to use a similar way to allocate the memory, that is,
moving memory allocations from caller into ops->start(). With this,
we can solve both kinds of memory leaks: for 1), no memory allocation
happens before ops->start(); for 2), ops->start() handles its own
failures and 'info' is installed to the socket control block only
when success. The only ugliness here is we have to pass all local
variables on stack via a struct, but this is not hard to understand.

Alternatively, we can introduce a ops->free() to solve this too,
but it is overkill as only genetlink has this problem so far.

Fixes: 1927f41a ("net: genetlink: introduce dump info struct to be available during dumpit op")
Reported-by: syzbot+21f04f481f449c8db840@syzkaller.appspotmail.com
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Shaochun Chen <cscnull@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4_uld_in_use() is used only by cxgb4_ktls_det_feature() which
is under CONFIG_CHELSIO_TLS_DEVICE macro.

Fixes: a3ac249a ("cxgb4/chcr: Enable ktls settings at run time")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

Pull comedi uaccess cleanups from Al Viro:
 "Comedi compat ioctls done saner - killing the single biggest pile of
  __get_user/__put_user outside of arch/* in the process"

* 'uaccess.comedi' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  comedi: get rid of compat_alloc_user_space() mess in COMEDI_CMD{,TEST} compat
  comedi: do_cmd_ioctl(): lift copyin/copyout into the caller
  comedi: do_cmdtest_ioctl(): lift copyin/copyout into the caller
  comedi: lift copy_from_user() into callers of __comedi_get_user_cmd()
  comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSNLIST compat
  comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSN compat
  comedi: get rid of compat_alloc_user_space() mess in COMEDI_RANGEINFO compat
  comedi: get rid of compat_alloc_user_space() mess in COMEDI_CHANINFO compat
  comedi: get rid of indirection via translated_ioctl()
  comedi: move compat ioctl handling to native fops

Pull splice updates from Al Viro:
 "Christoph's assorted splice cleanups"

* 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: rename pipe_buf ->steal to ->try_steal
  fs: make the pipe_buf_operations ->confirm operation optional
  fs: make the pipe_buf_operations ->steal operation optional
  trace: remove tracing_pipe_buf_ops
  pipe: merge anon_pipe_buf*_ops
  fs: simplify do_splice_from
  fs: simplify do_splice_to

Pull kvm updates from Paolo Bonzini:
 "ARM:
   - Move the arch-specific code into arch/arm64/kvm

   - Start the post-32bit cleanup

   - Cherry-pick a few non-invasive pre-NV patches

  x86:
   - Rework of TLB flushing

   - Rework of event injection, especially with respect to nested
     virtualization

   - Nested AMD event injection facelift, building on the rework of
     generic code and fixing a lot of corner cases

   - Nested AMD live migration support

   - Optimization for TSC deadline MSR writes and IPIs

   - Various cleanups

   - Asynchronous page fault cleanups (from tglx, common topic branch
     with tip tree)

   - Interrupt-based delivery of asynchronous "page ready" events (host
     side)

   - Hyper-V MSRs and hypercalls for guest debugging

   - VMX preemption timer fixes

  s390:
   - Cleanups

  Generic:
   - switch vCPU thread wakeup from swait to rcuwait

  The other architectures, and the guest side of the asynchronous page
  fault work, will come next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
  KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
  KVM: check userspace_addr for all memslots
  KVM: selftests: update hyperv_cpuid with SynDBG tests
  x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
  x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
  x86/kvm/hyper-v: Add support for synthetic debugger interface
  x86/hyper-v: Add synthetic debugger definitions
  KVM: selftests: VMX preemption timer migration test
  KVM: nVMX: Fix VMX preemption timer migration
  x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
  KVM: x86/pmu: Support full width counting
  KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
  KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
  KVM: x86: acknowledgment mechanism for async pf page ready notifications
  KVM: x86: interrupt based APF 'page ready' event delivery
  KVM: introduce kvm_read_guest_offset_cached()
  KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
  KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
  Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
  KVM: VMX: Replace zero-length array with flexible-array
  ...

Pull hyper-v updates from Wei Liu:

 - a series from Andrea to support channel reassignment

 - a series from Vitaly to clean up Vmbus message handling

 - a series from Michael to clean up and augment hyperv-tlfs.h

 - patches from Andy to clean up GUID usage in Hyper-V code

 - a few other misc patches

* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (29 commits)
  Drivers: hv: vmbus: Resolve more races involving init_vp_index()
  Drivers: hv: vmbus: Resolve race between init_vp_index() and CPU hotplug
  vmbus: Replace zero-length array with flexible-array
  Driver: hv: vmbus: drop a no long applicable comment
  hyper-v: Switch to use UUID types directly
  hyper-v: Replace open-coded variant of %*phN specifier
  hyper-v: Supply GUID pointer to printf() like functions
  hyper-v: Use UUID API for exporting the GUID (part 2)
  asm-generic/hyperv: Add definitions for Get/SetVpRegister hypercalls
  x86/hyperv: Split hyperv-tlfs.h into arch dependent and independent files
  x86/hyperv: Remove HV_PROCESSOR_POWER_STATE #defines
  KVM: x86: hyperv: Remove duplicate definitions of Reference TSC Page
  drivers: hv: remove redundant assignment to pointer primary_channel
  scsi: storvsc: Re-init stor_chns when a channel interrupt is re-assigned
  Drivers: hv: vmbus: Introduce the CHANNELMSG_MODIFYCHANNEL message type
  Drivers: hv: vmbus: Synchronize init_vp_index() vs. CPU hotplug
  Drivers: hv: vmbus: Remove the unused HV_LOCALIZED channel affinity logic
  PCI: hv: Prepare hv_compose_msi_msg() for the VMBus-channel-interrupt-to-vCPU reassignment functionality
  Drivers: hv: vmbus: Use a spin lock for synchronizing channel scheduling vs. channel removal
  hv_utils: Always execute the fcopy and vss callbacks in a tasklet
  ...

Pull kgdb updates from Daniel Thompson:
 "By far the biggest change in this cycle are the changes that allow
  much earlier debug of systems that are hooked up via UART by taking
  advantage of the earlycon framework to implement the kgdb I/O hooks
  before handing over to the regular polling I/O drivers once they are
  available. When discussing Doug's work we also found and fixed an
  broken raw_smp_processor_id() sequence in in_dbg_master().

  Also included are a collection of much smaller fixes and tweaks: a
  couple of tweaks to ged rid of doc gen or coccicheck warnings, future
  proof some internal calculations that made implicit power-of-2
  assumptions and eliminate some rather weird handling of magic
  environment variables in kdb"

* tag 'kgdb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Remove the misfeature 'KDBFLAGS'
  kdb: Cleanup math with KDB_CMD_HISTORY_COUNT
  serial: amba-pl011: Support kgdboc_earlycon
  serial: 8250_early: Support kgdboc_earlycon
  serial: qcom_geni_serial: Support kgdboc_earlycon
  serial: kgdboc: Allow earlycon initialization to be deferred
  Documentation: kgdboc: Document new kgdboc_earlycon parameter
  kgdb: Don't call the deinit under spinlock
  kgdboc: Disable all the early code when kgdboc is a module
  kgdboc: Add kgdboc_earlycon to support early kgdb using boot consoles
  kgdboc: Remove useless #ifdef CONFIG_KGDB_SERIAL_CONSOLE in kgdboc
  kgdb: Prevent infinite recursive entries to the debugger
  kgdb: Delay "kgdbwait" to dbg_late_init() by default
  kgdboc: Use a platform device to handle tty drivers showing up late
  Revert "kgdboc: disable the console lock when in kgdb"
  kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb
  kgdb: Return true in kgdb_nmi_poll_knock()
  kgdb: Drop malformed kernel doc comment
  kgdb: Fix spurious true from in_dbg_master()

Pull Xtensa updates from Max Filippov:

 - fix __user annotations in asm/uaccess.h

 - fix comments in entry.S

* tag 'xtensa-20200603' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: Fix spelling/grammar in comment
  xtensa: add missing __user annotations to asm/uaccess.h
  xtensa: fix error paths in __get_user_{check,size}
  xtensa: fix type conversion in __get_user_size
  xtensa: add missing __user annotations to __{get,put}_user_check

Pull parsic updates from Helge Deller:
 "Enable the sysctl file interface for panic_on_stackoverflow for
  parisc, a warning fix and a bunch of documentation updates since the
  parisc website is now at https://parisc.wiki.kernel.org"

* 'parisc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: MAINTAINERS: Update references to parisc website
  parisc: module: Update references to parisc website
  parisc: hardware: Update references to parisc website
  parisc: firmware: Update references to parisc website
  parisc: Kconfig: Update references to parisc website
  parisc: add sysctl file interface panic_on_stackoverflow
  parisc: use -fno-strict-aliasing for decompressor
  parisc: suppress error messages for 'make clean'

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for MIPSr5 and P5600 cores

 - converted Loongson PCI driver into a PCI host driver using the
   generic PCI framework

 - added emulation of CPUCFG command for Loogonson64 cpus

 - removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA

 - ioremap cleanup

 - fix for a race between two threads faulting the same page

 - various cleanups and fixes

* tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (143 commits)
  MIPS: ralink: drop ralink_clk_init for mt7621
  MIPS: ralink: bootrom: mark a function as __init to save some memory
  MIPS: Loongson64: Reorder CPUCFG model match arms
  MIPS: Expose Loongson CPUCFG availability via HWCAP
  MIPS: Loongson64: Guard against future cores without CPUCFG
  MIPS: Fix build warning about "PTR_STR" redefinition
  MIPS: Loongson64: Remove not used pci.c
  MIPS: Loongson64: Define PCI_IOBASE
  MIPS: CPU_LOONGSON2EF need software to maintain cache consistency
  MIPS: DTS: Fix build errors used with various configs
  MIPS: Loongson64: select NO_EXCEPT_FILL
  MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()
  MIPS: mm: add page valid judgement in function pte_modify
  mm/memory.c: Add memory read privilege on page fault handling
  mm/memory.c: Update local TLB if PTE entry exists
  MIPS: Do not flush tlb page when updating PTE entry
  MIPS: ingenic: Default to a generic board
  MIPS: ingenic: Add support for GCW Zero prototype
  MIPS: ingenic: DTS: Add memory info of GCW Zero
  MIPS: Loongson64: Switch to generic PCI driver
  ...

Pull ia64 build regression fix from Al Viro:
 "Fix a braino in ia64 uaccess csum changes"

* 'uaccess.csum' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix a braino in ia64 uaccess csum changes

Fixes: cc03f19c (ia64: csum_partial_copy_nocheck(): don't abuse csum_partial_copy_from_user())
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull thread updates from Christian Brauner:
 "We have been discussing using pidfds to attach to namespaces for quite
  a while and the patches have in one form or another already existed
  for about a year. But I wanted to wait to see how the general api
  would be received and adopted.

  This contains the changes to make it possible to use pidfds to attach
  to the namespaces of a process, i.e. they can be passed as the first
  argument to the setns() syscall.

  When only a single namespace type is specified the semantics are
  equivalent to passing an nsfd. That means setns(nsfd, CLONE_NEWNET)
  equals setns(pidfd, CLONE_NEWNET).

  However, when a pidfd is passed, multiple namespace flags can be
  specified in the second setns() argument and setns() will attach the
  caller to all the specified namespaces all at once or to none of them.

  Specifying 0 is not valid together with a pidfd. Here are just two
  obvious examples:

    setns(pidfd, CLONE_NEWPID | CLONE_NEWNS | CLONE_NEWNET);
    setns(pidfd, CLONE_NEWUSER);

  Allowing to also attach subsets of namespaces supports various
  use-cases where callers setns to a subset of namespaces to retain
  privilege, perform an action and then re-attach another subset of
  namespaces.

  Apart from significantly reducing the number of syscalls needed to
  attach to all currently supported namespaces (eight "open+setns"
  sequences vs just a single "setns()"), this also allows atomic setns
  to a set of namespaces, i.e. either attaching to all namespaces
  succeeds or we fail without having changed anything.

  This is centered around a new internal struct nsset which holds all
  information necessary for a task to switch to a new set of namespaces
  atomically. Fwiw, with this change a pidfd becomes the only token
  needed to interact with a container. I'm expecting this to be
  picked-up by util-linux for nsenter rather soon.

  Associated with this change is a shiny new test-suite dedicated to
  setns() (for pidfds and nsfds alike)"

* tag 'threads-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  selftests/pidfd: add pidfd setns tests
  nsproxy: attach to namespaces via pidfds
  nsproxy: add struct nsset

Pull scheduler updates from Ingo Molnar:
 "The changes in this cycle are:

   - Optimize the task wakeup CPU selection logic, to improve
     scalability and reduce wakeup latency spikes

   - PELT enhancements

   - CFS bandwidth handling fixes

   - Optimize the wakeup path by remove rq->wake_list and replacing it
     with ->ttwu_pending

   - Optimize IPI cross-calls by making flush_smp_call_function_queue()
     process sync callbacks first.

   - Misc fixes and enhancements"

* tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  irq_work: Define irq_work_single() on !CONFIG_IRQ_WORK too
  sched/headers: Split out open-coded prototypes into kernel/sched/smp.h
  sched: Replace rq::wake_list
  sched: Add rq::ttwu_pending
  irq_work, smp: Allow irq_work on call_single_queue
  smp: Optimize send_call_function_single_ipi()
  smp: Move irq_work_run() out of flush_smp_call_function_queue()
  smp: Optimize flush_smp_call_function_queue()
  sched: Fix smp_call_function_single_async() usage for ILB
  sched/core: Offload wakee task activation if it the wakee is descheduling
  sched/core: Optimize ttwu() spinning on p->on_cpu
  sched: Defend cfs and rt bandwidth quota against overflow
  sched/cpuacct: Fix charge cpuacct.usage_sys
  sched/fair: Replace zero-length array with flexible-array
  sched/pelt: Sync util/runnable_sum with PELT window when propagating
  sched/cpuacct: Use __this_cpu_add() instead of this_cpu_ptr()
  sched/fair: Optimize enqueue_task_fair()
  sched: Make scheduler_ipi inline
  sched: Clean up scheduler_ipi()
  sched/core: Simplify sched_init()
  ...

Pull x86 timer updates from Thomas Gleixner:
 "X86 timer specific updates:

   - Add TPAUSE based delay which allows the CPU to enter an optimized
     power state while waiting for the delay to pass. The delay is based
     on TSC cycles.

   - Add tsc_early_khz command line parameter to workaround the problem
     that overclocked CPUs can report the wrong frequency via CPUID.16h
     which causes the refined calibration to fail because the delta to
     the initial frequency value is too big. With the parameter users
     can provide an halfways accurate initial value"

* tag 'x86-timers-2020-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Add tsc_early_khz command line parameter
  x86/delay: Introduce TPAUSE delay
  x86/delay: Refactor delay_mwaitx() for TPAUSE support
  x86/delay: Preparatory code cleanup

Pull timer updates from Thomas Gleixner:
 "The truly boring timer and clocksource updates for 5.8:

   - Not a single new clocksource or clockevent driver!

   - Device tree updates for various chips

   - Fixes and improvements and cleanups all over the place"

* tag 'timers-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  dt-bindings: timer: Add renesas,em-sti bindings
  clocksource/drivers/timer-versatile: Clear OF_POPULATED flag
  clocksource: mips-gic-timer: Mark GIC timer as unstable if ref clock changes
  clocksource: mips-gic-timer: Register as sched_clock
  clocksource: dw_apb_timer_of: Fix missing clockevent timers
  clocksource: dw_apb_timer: Affiliate of-based timer with any CPU
  clocksource: dw_apb_timer: Make CPU-affiliation being optional
  dt-bindings: timer: Move snps,dw-apb-timer DT schema from rtc
  dt-bindings: rtc: Convert snps,dw-apb-timer to DT schema
  clocksource/drivers/timer-ti-dm: Do one override clock parent in prepare()
  clocksource/drivers/timer-ti-dm: Fix spelling mistake "detectt" -> "detect"
  clocksource/drivers/timer-ti-dm: Fix warning for set but not used
  clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
  clocksource/drivers/timer-ti-32k: Add support for initializing directly
  drivers/clocksource/arm_arch_timer: Remove duplicate error message
  clocksource/drivers/arc_timer: Remove duplicate error message
  clocksource/drivers/rda: drop redundant Kconfig dependency
  clocksource/drivers/timer-ti-dm: Fix warning for set but not used
  clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support
  clocksource/drivers/timer-ti-32k: Add support for initializing directly
  ...

Pull irq updates from Thomas Gleixner:
 "The generic interrupt departement provides:

   - Cleanup of the irq_domain API

   - Overhaul of the interrupt chip simulator

   - The usual pile of new interrupt chip drivers

   - Cleanups, improvements and fixes all over the place"

* tag 'irq-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  irqchip: Fix "Loongson HyperTransport Vector support" driver build on all non-MIPS platforms
  dt-bindings: interrupt-controller: Add Loongson PCH MSI
  irqchip: Add Loongson PCH MSI controller
  dt-bindings: interrupt-controller: Add Loongson PCH PIC
  irqchip: Add Loongson PCH PIC controller
  dt-bindings: interrupt-controller: Add Loongson HTVEC
  irqchip: Add Loongson HyperTransport Vector support
  genirq: Check irq_data_get_irq_chip() return value before use
  irqchip/sifive-plic: Improve boot prints for multiple PLIC instances
  irqchip/sifive-plic: Setup cpuhp once after boot CPU handler is present
  irqchip/sifive-plic: Set default irq affinity in plic_irqdomain_map()
  irqchip/gic-v2, v3: Drop extra IRQ_NOAUTOEN setting for (E)PPIs
  irqdomain: Allow software nodes for IRQ domain creation
  irqdomain: Get rid of special treatment for ACPI in __irq_domain_add()
  irqdomain: Make __irq_domain_add() less OF-dependent
  iio: dummy_evgen: Fix use after free on error in iio_dummy_evgen_create()
  irqchip/gic-v3-its: Balance initial LPI affinity across CPUs
  irqchip/gic-v3-its: Track LPI distribution on a per CPU basis
  genirq/irq_sim: Simplify the API
  irqdomain: Make irq_domain_reset_irq_data() available to  non-hierarchical users
  ...

Pull erofs updates from Gao Xiang:
 "The most interesting part is the new mount api conversion, which is
  actually a old patch already pending for several cycles. And the
  others are recent trivial cleanups here.

  Summary:

   - Convert to use the new mount apis

   - Some random cleanup patches"

* tag 'erofs-for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: suppress false positive last_block warning
  erofs: convert to use the new mount fs_context api
  erofs: code cleanup by removing ifdef macro surrounding

Pull JFS update from David Kleikamp:
 "Replace zero-length array in JFS"

* tag 'jfs-5.8' of git://github.com/kleikamp/linux-shaggy:
  jfs: Replace zero-length array with flexible-array member

Pull btrfs updates from David Sterba:
 "Highlights:

   - speedup dead root detection during orphan cleanup, eg. when there
     are many deleted subvolumes waiting to be cleaned, the trees are
     now looked up in radix tree instead of a O(N^2) search

   - snapshot creation with inherited qgroup will mark the qgroup
     inconsistent, requires a rescan

   - send will emit file capabilities after chown, this produces a
     stream that does not need postprocessing to set the capabilities
     again

   - direct io ported to iomap infrastructure, cleaned up and simplified
     code, notably removing last use of struct buffer_head in btrfs code

  Core changes:

   - factor out backreference iteration, to be used by ordinary
     backreferences and relocation code

   - improved global block reserve utilization
      * better logic to serialize requests
      * increased maximum available for unlink
      * improved handling on large pages (64K)

   - direct io cleanups and fixes
      * simplify layering, where cloned bios were unnecessarily created
        for some cases
      * error handling fixes (submit, endio)
      * remove repair worker thread, used to avoid deadlocks during
        repair

   - refactored block group reading code, preparatory work for new type
     of block group storage that should improve mount time on large
     filesystems

  Cleanups:

   - cleaned up (and slightly sped up) set/get helpers for metadata data
     structure members

   - root bit REF_COWS got renamed to SHAREABLE to reflect the that the
     blocks of the tree get shared either among subvolumes or with the
     relocation trees

  Fixes:

   - when subvolume deletion fails due to ENOSPC, the filesystem is not
     turned read-only

   - device scan deals with devices from other filesystems that changed
     ownership due to overwrite (mkfs)

   - fix a race between scrub and block group removal/allocation

   - fix long standing bug of a runaway balance operation, printing the
     same line to the syslog, caused by a stale status bit on a reloc
     tree that prevented progress

   - fix corrupt log due to concurrent fsync of inodes with shared
     extents

   - fix space underflow for NODATACOW and buffered writes when it for
     some reason needs to fallback to COW mode"

* tag 'for-5.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (133 commits)
  btrfs: fix space_info bytes_may_use underflow during space cache writeout
  btrfs: fix space_info bytes_may_use underflow after nocow buffered write
  btrfs: fix wrong file range cleanup after an error filling dealloc range
  btrfs: remove redundant local variable in read_block_for_search
  btrfs: open code key_search
  btrfs: split btrfs_direct_IO to read and write part
  btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK
  fs: remove dio_end_io()
  btrfs: switch to iomap_dio_rw() for dio
  iomap: remove lockdep_assert_held()
  iomap: add a filesystem hook for direct I/O bio submission
  fs: export generic_file_buffered_read()
  btrfs: turn space cache writeout failure messages into debug messages
  btrfs: include error on messages about failure to write space/inode caches
  btrfs: remove useless 'fail_unlock' label from btrfs_csum_file_blocks()
  btrfs: do not ignore error from btrfs_next_leaf() when inserting checksums
  btrfs: make checksum item extension more efficient
  btrfs: fix corrupt log due to concurrent fsync of inodes with shared extents
  btrfs: unexport btrfs_compress_set_level()
  btrfs: simplify iget helpers
  ...

Pull DAX updates part two from Darrick Wong:
 "This time around, we're hoisting the DONTCACHE flag from XFS into the
  VFS so that we can make the incore DAX mode changes become effective
  sooner.

  We can't change the file data access mode on a live inode because we
  don't have a safe way to change the file ops pointers. The incore
  state change becomes effective at inode loading time, which can happen
  if the inode is evicted. Therefore, we're making it so that
  filesystems can ask the VFS to evict the inode as soon as the last
  holder drops.

  The per-fs changes to make this call this will be in subsequent pull
  requests from Ted and myself.

  Summary:

   - Introduce DONTCACHE flags for dentries and inodes. This hint will
     cause the VFS to drop the associated objects immediately after the
     last put, so that we can change the file access mode (DAX or page
     cache) on the fly"

* tag 'vfs-5.8-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fs: Introduce DCACHE_DONTCACHE
  fs: Lift XFS_IDONTCACHE to the VFS layer