The pci_dma_* functions are now superseeded in the kernel by the DMA
API. Make the conversion to this more generic API.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Use the IOMMU bit specified in platform data instead of hardcoding it to
the bit used by current Tegra GPUs.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Current Tegra code taking advantage of the IOMMU assumes a hardcoded
value for the IOMMU bit. Make it a platform property instead for
flexibility.

v2 (Ben Skeggs): remove nvkm dependence on drm structures
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The Great Nouveau Refactoring Take II brought us a lot of goodness,
including acquire/release methods that are called before and after an
instobj is modified. These functions can be used as synchronization
points to manage CPU/GPU coherency if we modify an instobj using the
CPU.

This patch replaces the legacy and slow PRAMIN access for gk20a instmem
with CPU mappings and writes. A LRU list is used to unmap unused
mappings after a certain threshold (currently 1MB) of mapped instobjs is
reached. This allows mappings to be reused most of the time.

Accessing instobjs using the CPU requires to maintain the GPU L2 cache,
which we do in the acquire/release functions. This triggers a lot of L2
flushes/invalidates, but most of them are performed on an empty cache
(and thus return immediately), and overall context setup performance
greatly benefits from this (from 250ms to 160ms on Jetson TK1 for a
simple libdrm program).

Making L2 management more explicit should allow us to grab some more
performance in the future.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

No longer required in a lot of cases, as objects are identified over NVIF
via an alternate mechanism since the rework.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Allow clients to manually flush and invalidate L2. This will be useful
for Tegra systems for which we want to write instmem using the CPU.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

These are useful for systems without a coherent CPU/GPU bus. For such
systems we may need to maintain the L2 ourselves.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Reintroduce macros allowing us to test a register against a certain
mask, since this is the most common usage pattern for the more generic
nvkm_xsec macros and makes the code more concise and readable.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Some devices may not have a PMU. Avoid a NULL pointer dereference in
such cases by checking whether the pointer given to nvkm_pmu_pgob() is
valid.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

On nv50+, we restrict the valid domains to just the one where the buffer
was originally created. However after the buffer is evicted to system
memory, we might move it back to a different domain that was not
originally valid. When sharing the buffer and retrieving its GEM_INFO
data, we still want the domain that will be valid for this buffer in a
pushbuf, not the one where it currently happens to be.

This resolves fdo#92504 and several others. These are due to suspend
evicting all buffers, making it more likely that they temporarily end up
in the wrong place.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Few more drm-misc stragglers for 4.4. Big thing is the generic probe for
imx/rockchip/armada (but the variant for msm/rpi/exynos is still missing).

Also the hdmi clocking fixes from Ville which was a lot of confusion about
which tree it should be applied to ;-)

* tag 'topic/drm-misc-2015-10-22' of git://anongit.freedesktop.org/drm-intel:
  drm: correctly check failed allocation
  vga_switcheroo: Constify vga_switcheroo_handler
  drm/armada: Convert the probe function to the generic drm_of_component_probe()
  drm/rockchip: Convert the probe function to the generic drm_of_component_probe()
  drm/imx: Convert the probe function to the generic drm_of_component_probe()
  drm: Introduce generic probe function for component based masters.
  drm/edid: Round to closest when computing the CEA/HDMI alternate clock
  drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings

More amdgpu and radeon stuff for drm-next.  Stoney support is the big change.
The rest is just bug fixes and code cleanups.  The Stoney stuff is pretty
low impact with respect to existing chips.

* 'drm-next-4.4' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: change VM size default to 64GB
  drm/amdgpu: add Stoney pci ids
  drm/amdgpu: update the core VI support for Stoney
  drm/amdgpu: add VCE support for Stoney (v2)
  drm/amdgpu: add UVD support for Stoney
  drm/amdgpu: add GFX support for Stoney (v2)
  drm/amdgpu: add SDMA support for Stoney (v2)
  drm/amdgpu: add DCE support for Stoney
  drm/amdgpu: Update SMC/DPM for Stoney
  drm/amdgpu: add GMC support for Stoney
  drm/amdgpu: add Stoney chip family
  drm/amdgpu: fix the broken vm->mutex V2
  drm/amdgpu: remove the unnecessary parameter adev for amdgpu_fence_wait_any()
  drm/amdgpu: remove the exclusive lock
  drm/amdgpu: remove old lockup detection infrastructure
  drm: fix trivial typos
  drm/amdgpu/dce: simplify suspend/resume
  drm/amdgpu/gfx8: set TC_WB_ACTION_EN in RELEASE_MEM packet
  drm/radeon: Use rdev->gem.mutex to protect hyperz/cmask owners

Merge tag 'drm-intel-next-fixes-2015-10-22' of git://anongit.freedesktop.org/drm-intel into drm-next

Bunch of -fixes for 4.4. Well not just, I've left the mmio/register work
from Ville in here since it's low-risk but lots of churn all over.

* tag 'drm-intel-next-fixes-2015-10-22' of git://anongit.freedesktop.org/drm-intel: (23 commits)
  drm/i915: Use round to closest when computing the CEA 1.001 pixel clocks
  drm/i915: Kill the leftover RMW from ivb_sprite_disable()
  drm/i915: restore ggtt double-bind avoidance
  drm/i915/skl: Enable pipe gamma for sprite planes.
  drm/i915/skl+: Enable pipe CSC on cursor planes. (v2)
  MAINTAINERS: add link to the Intel Graphics for Linux web site
  drm/i915: Move skl/bxt gt specific workarounds to ring init
  drm/i915: Drop i915_gem_obj_is_pinned() from set-cache-level
  drm/i915: revert a few more watermark commits
  drm/i915: Remove dev_priv argument from NEEDS_FORCE_WAKE
  drm/i915: Clean up LVDS register handling
  drm/i915: Throw out some useless variables
  drm/i915: Parametrize and fix SWF registers
  drm/i915: s/PIPE_FRMCOUNT_GM45/PIPE_FRMCOUNT_G4X/ etc.
  drm/i915: Turn GEN5_ASSERT_IIR_IS_ZERO() into a function
  drm/i915: Fix a few bad hex numbers in register defines
  drm/i915: Protect register macro arguments
  drm/i915: Include gpio_mmio_base in GMBUS reg defines
  drm/i915: Parametrize HSW video DIP data registers
  drm/i915: Eliminate weird parameter inversion from BXT PPS registers
  ...

A bit smaller pull this time.  Few minor things, plus initial support
for msm8996 (snapdragon 820)..  Sorry, a bit latish, was hoping to get
some 8960/8064 DSI stuff included.  But still waiting on the v2 of the
patchset (just pending some minor review comments).  It would be nice
to get the DSI patches merged since it would help some folks trying to
get upstream kernel running on n4/n7 and xperia z and wanting to write
some more panel drivers.  Also, waiting for OCMEM driver to get merged
via other trees and then I have a small bit to go along with that to
make the gpu actually work on devices w/ OCMEM (snapdragon 800, 805,
etc).  So maybe a second later pull req, time permitting.

* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
  drm/msm: Remove local fbdev emulation Kconfig option
  drm/msm/mdp5: Basic support for MDP5 v1.7 (MSM8996)
  drm/msm/mdp: Add Software Pixel Extension support
  drm/msm/mdp5: Use the newly introduced enum mdp_component_type
  drm/msm/hdmi: Add basic HDMI support for msm8996
  drm/msm/mdp5: Avoid printing error messages for optional clocks
  drm/msm: Fix IOMMU clean up path in case msm_iommu_new() fails
  drm/msm/mdp5: remove the cfg pointer from SMP struct
  drm/msm/dsi: Updata LNn_CFG4 register settings for 28nm PHY
  drm: msm: dsi: Don't attempt changing voltage of switches
  drm/msm: update generated headers

DRM_MSM_FBDEV config is used to enable/disable fbdev emulation for the
msm kms driver.

Replace this with the top level DRM_FBDEV_EMULATION config option where
applicable. This also prevents build breaks caused by undefined
drm_fb_helper_* functions when legacy fbdev support was disabled.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

This change adds the basic MDP5 support for MSM8996.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

In order to produce an image, the scalar needs to be fed extra
pixels. These top/bottom/left/right values depend on a various of
factors, including resolution, scaling type, phase step and
initial phase.

Pixel Extension are programmed by hardware in most targets - and
can be overwritten by software. For some targets (e.g.: msm8996),
software *must* program those registers.

In order to ease this computation, let's always use bilinear
filters, which are easier to program from kernel. Eventually,
all of these values will come down from user space for better
quality.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

When calculating phase steps, let's use the same enum
mdp_component_type in order to ease the readability; 0/1 indexes
are a bit confusing and we now have explicit values to index
this type of arrays.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The HDMI controller is new in MDP5 v1.7. As of now, this change
doesn't reflect the novelty and only adds the basics so the probe
gets triggered.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The current behavior is to try to get optional clocks and print a
dev_err message in case of failure. This looks rather confusing
and may increase with the amount of optional clocks.

We may need a cleaner way to handle per-device clocks but in the
meantime, let's reduce the amount of dev_err messages during the
probe.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

msm_iommu_new() can fail and this change makes sure that we
detect the failure and free the allocated domain before going
any further.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

We want to make sure we control all the information being passed
down to SMP block. Having access to the cfg pointer here may create
bad things in the future.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The current settings for 28nm PHY data lane CFG4 registers do
not work with certain panels. This change is to modify them to
hw recommended values.
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

In some configurations the supplies are voltage switches and not LDOs,
making the set voltage call to fail. Check with the regulator framework
if the supply can change voltage before attempting.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

rcar-du support for r8a7793/4
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
  drm: rcar-du: Add support for the R8A7794 DU
  drm: rcar-du: Add support for the R8A7793 DU

This pull request introduces the vc4 driver, for kernel modesetting on
the Raspberry Pi (bcm2835/bcm2836 architectures).  It currently
supports a display plane and cursor on the HDMI output.  The driver
doesn't do 3D, power management, or overlay planes yet.

[airlied: fixup the enable/disable vblank APIs]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

* tag 'drm-vc4-next-2015-10-21' of http://github.com/anholt/linux:
  drm/vc4: Allow vblank to be disabled
  drm/vc4: Use the fbdev_cma helpers
  drm/vc4: Add KMS support for Raspberry Pi.
  drm/vc4: Add devicetree bindings for VC4.

That's still small enough to not waste to much memory on PD/PTs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add core VI enablement for Stoney.
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Stoney is VCE 3.x single.

v2: Stoney is single pipe like Fiji
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Stoney is UVD 6.x.
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Stoney is GFX 8.1.

v2: update to latest golden settings
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Stoney is SDMA 3.x.

v2: update to latest golden register settings
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Stoney is DCE 11.x.
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Stoney is SMC 8.x.
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Stoney is GMC 8.x.
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Stoney is based on Carrizo with some IP upgrades.
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The R8A7794 DU has a fixed output routing configuration with one RGB
output per CRTC and thus lacks the RGB output routing register field.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The R8A7793 DU is identical to the R8A7791 and thus only requires a new
DT compatible string.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>