- 24 Aug, 2020 12 commits
-
-
Sathyanarayana Nujella authored
Add topology filename override based on system DMI data matching, typically to account for a different hardware layout. In ACPI based systems, the tplg_filename is pre-defined in an ACPI machine table. When a DMI quirk is detected, the sof_pdata->tplg_filename is not set with the hard-coded ACPI value, and instead is set with the DMI-specific filename. Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200821195603.215535-14-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Sathyanarayana Nujella authored
A Chrome System based on tgl_max98373_rt5682 has different SSP interface configurations. Using DMI data of this variant DUT, override quirk data. Reviewed-by:
Mac Chiang <mac.chiang@intel.com> Signed-off-by:
-
Rander Wang authored
Ripto is another product based on TGL with the same audio hardware configuration as Volteer. Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
Bard Liao authored
The "id" field in sof_sdw_codec_info struct is actually the "part id". Rename to prevent confusions. Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
-
Bard Liao authored
Some codecs with the same part id but different SoundWire versions have different configurations. So we have to separate them in codec_info_list[]. Reviewed-by:
-
Pierre-Louis Bossart authored
All existing SoundWire codecs follow the same pattern on resume, except for this codec which doesn't test if the hardware is initialized. Reviewed-by:
Rander Wang <rander.wang@linux.intel.com> Signed-off-by:
-
Rander Wang authored
When the playback & capture streams are stopped simultaneously, the SOF PCI device will remain pm_runtime active. The root-cause is a race condition with two threads reaching the trigger function at the same time. They see another stream is active so the dapm pin is not disabled, so the codec remains active as well as the parent PCI device. For max98373, the capture stream provides feedback when playback is working and it is unused when playback is stopped. So the dapm pin should be set only when playback is active. Reviewed-by:
-
Pierre-Louis Bossart authored
The description and board layout is similar to previous ones for CometLake and TigerLake, except for a bump to SoundWire 1.2 and updates to part numbers to reflect the SDCA (SoundWire Device Class for Audio) hardware support. Note that one of the RT1316 amplifiers uses a non-zero UniqueID which is not required and will be ignored. Reviewed-by:
Jaska Uimonen <jaska.uimonen@intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
Some TGL devices use the same audio hardware as on CML platforms, with RT711 on link0, RT1308 on link1 and optionally link2, and RT715 on link 3. To clarify configurations, the rt1308 configurations are split between single amp on link1 and dual amps on link1. The case with two amps on different links is already identified with the group1 attribute. Reviewed-by:
-
Pierre-Louis Bossart authored
The UpExtreme board provides support for SoundWire link2 in 2 of the 3 advanced modes. Let's use it w/ rt5682. Reviewed-by:
-
Pierre-Louis Bossart authored
Add one of the configurations for rt5682 w/ the Up Extreme Advanced Audio mode using the SoundWire link2. Reviewed-by:
-
Bard Liao authored
The SoundWire version id of the existing RT1308, RT711, and RT715 codecs should be 2 (index for SoundWire 1.1), it was mistakenly set as 1 which pointed to the wrong version (SoundWire 1.0). This off-by-one error had no functional impact so far since the version number was not used, however in future patches this version will be required. Reviewed-by:
-
- 21 Aug, 2020 5 commits
-
-
Adam Thomson authored
Previous improvements around handling device and codec level probe functionality added the possibility of the voltage level being undefined for the scenario where the IO voltage retrieved from the regulator supply was below 1.2V, whereas previously the code defaulted to the 2.5V to 3.6V range in that case. This commit restores the default value to avoid this happening. Fixes: aa5b18d1 ("ASoC: da7219: Move soft reset handling to codec level probe") Reported-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200821142259.C2ECE3FB96@swsrvapps-01.diasemi.comSigned-off-by:
-
Bard Liao authored
We may allocate some resources in sof_sdw_codec_info .init function. Adding a corresponding .exit function can help to release these resources. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200820134542.8682-1-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Matthias Schiffer authored
The TLV320AIC32x4 is commonly used on TQ-Systems starterkit mainboards for i.MX-based SoMs (i.MX6Q/DL, i.MX6UL, i.MX7) and LS1021A. Signed-off-by:
Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/20200821071153.7317-2-matthias.schiffer@ew.tq-group.comSigned-off-by:
-
Matthias Schiffer authored
The TLV320AIC32x4 is commonly used on TQ-Systems starterkit mainboards for i.MX-based SoMs (i.MX6Q/DL, i.MX6UL, i.MX7) and LS1021A. Signed-off-by:
-
Pierre-Louis Bossart authored
Select SoundWire capabilities on newer Intel platforms, starting with CannonLake/CoffeeLake/CometLake. As done for HDaudio, the SoundWire link is an opt-in capability. We explicitly test for ACPI to avoid warnings on unmet dependencies on the SoundWire side. Signed-off-by:
-
- 20 Aug, 2020 5 commits
-
-
Mark Brown authored
Add mediatek codec (MT6359) driver MT6359 support playback and capture feature. On downlink path, it includes three DACs for handset, headset, and lineout path. On unlink path, it includeds three ADCs for main mic, second mic, 3rd mic, and headset mic. By scenario, select *_MUX widget to create damp path. And by select mic_type_mux to choose DMIC/AMIC/.... For example, select these MUX widget to create headset path (1) DAC In Mux --> "Normal Path" (2) HP Mux --> "Audio Playback" v6 changes: 1. Remove the compatible string in mt6359codec because MFD should be registering the platform device. v5 changes: 1. Don't need to unregister the component whic is already relegated to devm. 2. patchwork link: https://patchwork.kernel.org/cover/11716387/ https://patchwork.kernel.org/patch/11717757/ https://patchwork.kernel.org/patch/11716491/ v4 changes: 1. Add a remove() function to undo regulator_enable(). 2. Removed unnecessary logs. 3. patchwork link: https://patchwork.kernel.org/cover/11715553/ https://patchwork.kernel.org/patch/11716015/ https://patchwork.kernel.org/patch/11715557/ v3 changes: 1. patchwork link: https://patchwork.kernel.org/cover/11714291/ https://patchwork.kernel.org/patch/11714295/ https://patchwork.kernel.org/patch/11714339/ v2 changes: 1. patchwork link: https://patchwork.kernel.org/cover/11706935/ https://patchwork.kernel.org/patch/11708865/ https://patchwork.kernel.org/patch/11706937/ v1 changes: 1.lkml link: https://lkml.org/lkml/2020/3/5/1257 Jiaxin Yu (2): ASoC: mediatek: mt6359: add codec driver dt-bindings: mediatek: mt6359: add codec document .../devicetree/bindings/sound/mt6359.yaml | 61 + sound/soc/codecs/Kconfig | 8 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/mt6359.c | 2753 +++++++++++++++++ sound/soc/codecs/mt6359.h | 2640 ++++++++++++++++ 5 files changed, 5464 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/mt6359.yaml create mode 100644 sound/soc/codecs/mt6359.c create mode 100644 sound/soc/codecs/mt6359.h -- 2.18.0
-
Colin Ian King authored
Currently drvdata->clks is not being checked for an allocation failure, leading to potential null pointer dereferencing. Fix this by adding a check and returning -ENOMEM if an error occurred. Fixes: 1220f6a7 ("ASoC: qcom: Add common array to initialize soc based core clocks") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Rohit kumar <rohitkr@codeaurora.org> Addresses-Coverity: ("Dereference null return value") Link: https://lore.kernel.org/r/20200819160103.164893-1-colin.king@canonical.comSigned-off-by:
-
Pierre-Louis Bossart authored
Make sure the SoundWire driver can be loaded Signed-off-by:
-
Jiaxin Yu authored
This patch adds MediaTek MT6359 codec document. Signed-off-by:
Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://lore.kernel.org/r/1597913493-10747-3-git-send-email-jiaxin.yu@mediatek.comSigned-off-by:
-
Jiaxin Yu authored
Add the mt6359 codec driver. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/1597913493-10747-2-git-send-email-jiaxin.yu@mediatek.comSigned-off-by:
-
- 19 Aug, 2020 8 commits
-
-
Mark Brown authored
ASoC: Convert Samsung drivers to platform drivers
-
Samuel Holland authored
Due to a mistake made while reordering patches, commit 90cac932 ("ASoC: sun8i-codec: Fix DAPM to match the hardware topology") added the sun8i_codec_component_probe function without referencing it from the component definition. Add the reference so the probe function gets called as expected. Fixes: 90cac932 ("ASoC: sun8i-codec: Fix DAPM to match the hardware topology") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20200819034038.46418-1-samuel@sholland.orgSigned-off-by:
-
Arnd Bergmann authored
The constant requires indirectly including a machine header file, but it's not actually used any more since commit 87b132bc ("ASoC: samsung: s3c24{xx,12}-i2s: port to use generic dmaengine API"), so remove it completely. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
-
Arnd Bergmann authored
Avoid machine specific headers by using a gpio lookup table combined with a platform_driver for this board. Signed-off-by:
-
Arnd Bergmann authored
Avoid machine specific headers by using a gpio lookup table combined with a platform_driver for this board. Signed-off-by:
-
Arnd Bergmann authored
Avoid machine specific headers by using a gpio lookup table combined with a platform_driver for this board. Signed-off-by:
-
Anson Huang authored
Convert the NXP SPDIF binding to DT schema format using json-schema. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1597712771-32433-1-git-send-email-Anson.Huang@nxp.comSigned-off-by:
-
Pierre-Louis Bossart authored
Add version and class information explicitly to prepare for support for new devices. Signed-off-by:
-
- 18 Aug, 2020 10 commits
-
-
Johan Jonker authored
A test with the command below shows that the compatible string "rockchip,rk3308-spdif", "rockchip,rk3328-spdif" is already in use, but is not added to a document. The current fallback string "rockchip,rk3328-spdif" points to a data set enum RK_SPDIF_RK3366 in rockchip_spdif.c that is not used both in the mainline as in the manufacturer kernel. (Of the enum only RK_SPDIF_RK3288 is used.) So if the properties don't change we might as well use the first SoC in line as fallback string and add the description for rk3308 as: "rockchip,rk3308-spdif", "rockchip,rk3066-spdif" make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200818143727.5882-1-jbx6244@gmail.comSigned-off-by:
-
Charles Keepax authored
It seems the datasheet has never used the word slave for this error status bit and has always used the term address error. So update the driver to match the datasheets and also in the process align a bit better with avoiding the use of such words where possible. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200818160126.4852-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
Mark Brown authored
Merge series "ASoC: qdsp6: add gapless compressed audio support" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: This patchset adds gapless compressed audio support on q6asm. Gapless on q6asm is implemented using 2 streams in a single q6asm session. First few patches such as stream id per each command, gapless flags and silence meta data are for preparedness for adding gapless support. Last patch implements copy callback to allow finer control over buffer offsets, specially in partial drain cases. This patchset is tested on RB3 aka DB845c platform. This patchset as it is will support gapless however QDSP can also support switching decoders on a single stream. Patches to support such feature are send in different patchset which involves adding generic interfaces. Thanks, srini Changes since v2:(mostly suggested by Pierre) - removed unnessary kernel style comments, - moved TIMESTAMP flag to respective patch. - move preparatory code from gapless support patch to new one. - fix subject prefix of one patch. - add comments to clarify valid stream_ids Srinivas Kandagatla (10): ASoC: q6asm: rename misleading session id variable ASoC: q6asm: make commands specific to streams ASoC: q6asm: use flags directly from q6asm-dai ASoC: q6asm: add length to write command token ASoC: q6asm: add support to remove intial and trailing silence ASoC: q6asm: add support to gapless flag in q6asm open ASoC: q6asm-dai: add next track metadata support ASoC: q6asm-dai: prepare set params to accept profile change ASoC: q6asm-dai: add gapless support ASoC: q6asm-dai: add support to copy callback sound/soc/qcom/qdsp6/q6asm-dai.c | 414 +++++++++++++++++++++++-------- sound/soc/qcom/qdsp6/q6asm.c | 169 +++++++++---- sound/soc/qcom/qdsp6/q6asm.h | 49 ++-- 3 files changed, 469 insertions(+), 163 deletions(-) -- 2.21.0
-
Mark Brown authored
Merge series "ASoC: Intel: fix cppcheck warnings" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset tries to reduce the number of warnings on those drivers, so that cppcheck can become a viable tool to detect issues (currently hundreds of reports). Most of the problems are related to unnecessary/redundant variable assignments, prototypes and one nice logical mistake resulting in an always-true condition. Pierre-Louis Bossart (21): ASoC: Intel: Atom: sst-atom-controls: remove redundant assignments ASoC: Intel: Atom: compress: remove redundant assignment ASoC: Intel: Atom: platform-pcm: remove redundant assignment ASoC: Intel: Atom: sst: remove useless NULL assignment ASoC: Intel: Atom: remove redundant initialization ASoC: Intel: Atom: sst_pvt: remove redundant initialization ASoC: Intel: Atom: platform-pcm: fix redundant return ASoC: Intel: Atom: remove useless assignment ASoC: Intel: Atom: sst_loader: remove always-true condition ASoC: Intel: Atom: sst_pvt: simplify return handling ASoC: Intel: Atom: (cosmetic) align parameters ASoC: Intel: Baytrail: (cosmetic) align function parameters ASoC: Intel: common: (cosmetic) align function parameters ASoC: Intel: haswell: (cosmetic) align function parameters ASoC: Intel: haswell-ipc: remove redundant assignments ASoC: Intel: Skylake: skl-nhlt: remove redundant initialization ASoC: Intel: Skylake: cldma: remove redundant initialization ASoC: Intel: Skylake: sst-utils: remove redundant assignment ASoC: Intel: Skylake: skl-topology: remove redundant assignments ASoC: Intel: Skylake: skl-topology: remove redundant assignment ASoC: Intel: Skylake: (cosmetic) align function parameters sound/soc/intel/atom/sst-atom-controls.c | 4 +-- .../intel/atom/sst-mfld-platform-compress.c | 3 +- sound/soc/intel/atom/sst-mfld-platform-pcm.c | 4 +-- sound/soc/intel/atom/sst-mfld-platform.h | 4 +-- sound/soc/intel/atom/sst/sst.c | 5 ++- sound/soc/intel/atom/sst/sst.h | 34 +++++++++---------- sound/soc/intel/atom/sst/sst_loader.c | 3 +- sound/soc/intel/atom/sst/sst_pvt.c | 4 +-- sound/soc/intel/baytrail/sst-baytrail-ipc.h | 3 +- sound/soc/intel/common/sst-dsp-priv.h | 2 +- sound/soc/intel/common/sst-dsp.h | 15 ++++---- sound/soc/intel/haswell/sst-haswell-ipc.c | 4 +-- sound/soc/intel/haswell/sst-haswell-ipc.h | 2 +- sound/soc/intel/skylake/cnl-sst-dsp.h | 4 +-- sound/soc/intel/skylake/skl-nhlt.c | 2 +- sound/soc/intel/skylake/skl-sst-cldma.c | 2 +- sound/soc/intel/skylake/skl-sst-ipc.h | 16 ++++----- sound/soc/intel/skylake/skl-sst-utils.c | 2 +- sound/soc/intel/skylake/skl-topology.c | 8 ++--- sound/soc/intel/skylake/skl-topology.h | 8 ++--- sound/soc/intel/skylake/skl.h | 2 +- 21 files changed, 63 insertions(+), 68 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: da7219: Reorganise device/codec level probe/remove" from Adam Thomson <Adam.Thomson.Opensource@diasemi.com>: This patch set reorganises and fixes device and codec level probe/remove handling within the driver, to allow clean probe and remove at the codec level. This set relates to an issue raised by Yong Zhi where a codec level re-probe would fail due to clks still being registered from the previous instantiation. In addition some improvements around regulator handling and soft reset have also been included. Adam Thomson (3): ASoC: da7219: Move required devm_* allocations to device level code ASoC: da7219: Move soft reset handling to codec level probe ASoC: da7219: Fix clock handling around codec level probe sound/soc/codecs/da7219-aad.c | 85 +++++--- sound/soc/codecs/da7219-aad.h | 3 + sound/soc/codecs/da7219.c | 493 +++++++++++++++++++++++------------------- sound/soc/codecs/da7219.h | 1 + 4 files changed, 328 insertions(+), 254 deletions(-) -- 1.9.1
-
Mark Brown authored
Merge series "refine and clean code for synchronous mode" from Shengjiu Wang <shengjiu.wang@nxp.com>: refine and clean code for synchronous mode Shengjiu Wang (3): ASoC: fsl_sai: Refine enable/disable TE/RE sequence in trigger() ASoC: fsl_sai: Drop TMR/RMR settings for synchronous mode ASoC: fsl_sai: Replace synchronous check with fsl_sai_dir_is_synced changes in v3: - Add reviewed-by Nicolin - refine the commit log. - Add one more patch #3 changes in v2: - Split the commit - refine the sequence in trigger stop sound/soc/fsl/fsl_sai.c | 173 +++++++++++++++++++++++----------------- 1 file changed, 102 insertions(+), 71 deletions(-) -- 2.27.0
-
Mark Brown authored
Merge series "ASoC: qcom: Add support for SC7180 lpass variant" from Rohit kumar <rohitkr@codeaurora.org>: This patch chain add audio support for SC7180 soc by doing the required modification in existing common lpass-cpu/lpass-platform driver. This also fixes some concurrency issue. This patch series is already tested by Srinivas on Dragon Board 410c. Changes since v5: - Fixed remove api in lpass-sc7180.c - Addressed comments by Rob in yaml Documentation. Ajit Pandey (4): ASoC: qcom: Add common array to initialize soc based core clocks ASoC: qcom: lpass-platform: Replace card->dev with component->dev include: dt-bindings: sound: Add sc7180-lpass bindings header ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio Rohit kumar (8): ASoC: qcom: lpass-cpu: Move ahbix clk to platform specific function ASoC: qcom: lpass-platform: fix memory leak ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers ASoC: qcom: lpass-cpu: fix concurrency issue dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node ASoC: qcom: lpass-cpu: Use platform_get_resource ASoC: qcom: lpass-platform: Use platform_get_irq dt-bindings: sound: lpass-cpu: Move to yaml format .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 79 -------- .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 189 ++++++++++++++++++ include/dt-bindings/sound/sc7180-lpass.h | 10 + sound/soc/qcom/Kconfig | 5 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/lpass-apq8016.c | 86 ++++++-- sound/soc/qcom/lpass-cpu.c | 204 ++++++++++--------- sound/soc/qcom/lpass-ipq806x.c | 67 +++++++ sound/soc/qcom/lpass-lpaif-reg.h | 157 ++++++++------- sound/soc/qcom/lpass-platform.c | 155 +++++++++++---- sound/soc/qcom/lpass-sc7180.c | 216 +++++++++++++++++++++ sound/soc/qcom/lpass.h | 63 +++++- 12 files changed, 934 insertions(+), 299 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml create mode 100644 include/dt-bindings/sound/sc7180-lpass.h create mode 100644 sound/soc/qcom/lpass-sc7180.c -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project. -
Mark Brown authored
This patch series enables some features on the tlv3204 codec and also fixes some issues faced while testing v2: Fixed the build error from snd_soc_component_read32 v1: initial ASoC: codec: tlv3204: Codec workaround series Michael Sit Wei Hong (3): ASoC: codec: tlv3204: Enable 24 bit audio support ASoC: codec: tlv3204: Increased maximum supported channels ASoC: codec: tlv3204: Moving GPIO reset and add ADC reset sound/soc/codecs/tlv320aic32x4.c | 60 +++++++++++++++++++++++--------- 1 file changed, 44 insertions(+), 16 deletions(-) -- 2.17.1
-
Mark Brown authored
Merge series "ASoC: sun50i-codec-analog: Cleanup and power management" from Samuel Holland <samuel@sholland.org>: This series performs some minor cleanup on the driver for the analog codec in the Allwinner A64, and hooks up the existing mute switches to DAPM widgets, in order to provide improved power management. Changes since v1: - Collected Acked-by/Reviewed-by tags - Used SOC_MIXER_NAMED_CTL_ARRAY to avoid naming a widget "Earpiece" Samuel Holland (8): ASoC: sun50i-codec-analog: Fix duplicate use of ADC enable bits ASoC: sun50i-codec-analog: Gate the amplifier clock during suspend ASoC: sun50i-codec-analog: Group and sort mixer routes ASoC: sun50i-codec-analog: Make headphone routes stereo ASoC: sun50i-codec-analog: Enable DAPM for headphone switch ASoC: sun50i-codec-analog: Make line out routes stereo ASoC: sun50i-codec-analog: Enable DAPM for line out switch ASoC: sun50i-codec-analog: Enable DAPM for earpiece switch sound/soc/sunxi/sun50i-codec-analog.c | 176 ++++++++++++++++---------- 1 file changed, 111 insertions(+), 65 deletions(-) -- 2.26.2
-
Mark Brown authored
Merge series "This patch series is to enable multiple features on the Keembay Platform" from Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>: v2: Change channel-max device tree property to use new compatible string v1: Initial patch series Michael Sit Wei Hong (2): ASoC: Intel: KMB: Enable TDM audio capture dt-bindings: sound: intel,keembay-i2s: Add new compatible string .../bindings/sound/intel,keembay-i2s.yaml | 1 + sound/soc/intel/keembay/kmb_platform.c | 145 +++++++++++++----- 2 files changed, 109 insertions(+), 37 deletions(-) -- 2.17.1
-
