sizeof(void*) returns an unsigned long, but it was being used as a width parameter to a "%-*s" format string which requires an int.  On 64 bit platforms this causes a type mismatch:

    linux/kernel/irq/irqdomain.c:575: warning: field width should have type
    'int', but argument 6 has type 'long unsigned int'

This change casts the size to an int so printf gets the right data type.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: David Daney <david.daney@cavium.com>

Merge fixes from Andrew Morton.

* emailed from Andrew Morton <akpm@linux-foundation.org>: (14 patches)
  panic: fix stack dump print on direct call to panic()
  drivers/rtc/rtc-pl031.c: enable clock on all ST variants
  Revert "mm: vmscan: fix misused nr_reclaimed in shrink_mem_cgroup_zone()"
  hugetlb: fix race condition in hugetlb_fault()
  drivers/rtc/rtc-twl.c: use static register while reading time
  drivers/rtc/rtc-s3c.c: add placeholder for driver private data
  drivers/rtc/rtc-s3c.c: fix compilation error
  MAINTAINERS: add PCDP console maintainer
  memcg: do not open code accesses to res_counter members
  drivers/rtc/rtc-efi.c: fix section mismatch warning
  drivers/rtc/rtc-r9701.c: reset registers if invalid values are detected
  drivers/char/random.c: fix boot id uniqueness race
  memcg: fix broken boolen expression
  memcg: fix up documentation on global LRU

Pull networking fixes from David Miller:

 1) Fix bluetooth userland regression reported by Keith Packard, from
    Gustavo Padovan.

 2) Revert ath9k PS idle change, from Sujith Manoharan.

 3) Correct default TCP memory limits (again), from Eric Dumazet.

 4) Fix tcp_rcv_rtt_update() accidental use of unscaled RTT, from Neal
    Cardwell.

 5) We made a facility for layers like wireless to say how much tailroom
    they need in the SKB for link layer stuff such as wireless
    encryption etc., but TCP works hard to fill every SKB out to the end
    defeating this specification.

    This leads to every TCP packet getting reallocated by the wireless
    code in order to have the right amount of tailroom available.

    Fix TCP to only fill SKBs out to the real amount of data area it
    asked for during the allocation, this way it won't eat into the
    slack added for the device's tailroom needs.

    Reported by Marc Merlin and fixed by Eric Dumazet.

 6) Leaks, endian bugs, and new device IDs in bluetooth from Santosh
    Nayak, João Paulo Rechi Vita, Cho, Yu-Chen, Andrei Emeltchenko,
    AceLan Kao, and Andrei Emeltchenko.

 7) OOPS on tty_close fix in bluetooth's hci_ldisc from Johan Hovold.

 8) netfilter erroneously scales TCP window twice, fix from Changli Gao.

 9) Memleak fix in wext-core from Julia Lawall.

10) Consistently handle invalid TCP packets in ipv4 vs.  ipv6 conntrack,
    from Jozsef Kadlecsik.

11) Validate IP header length properly in netfilter conntrack's
    ipv4_get_l4proto().

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits)
  NFC: Fix the LLCP Tx fragmentation loop
  rtlwifi: Add missing DMA buffer unmapping for PCI drivers
  rtlwifi: Preallocate USB read buffers and eliminate kalloc in read routine
  tcp: avoid order-1 allocations on wifi and tx path
  net: allow pskb_expand_head() to get maximum tailroom
  bridge: Do not send queries on multicast group leaves
  MAINTAINERS: Mark NATSEMI driver as orphan'd.
  tcp: fix tcp_rcv_rtt_update() use of an unscaled RTT sample
  tcp: restore correct limit
  Revert "ath9k: fix going to full-sleep on PS idle"
  rt2x00: Fix rfkill_polling register function.
  bcma: fix build error on MIPS; implicit pcibios_enable_device
  netfilter: nf_conntrack: fix incorrect logic in nf_conntrack_init_net
  netfilter: nf_ct_ipv4: packets with wrong ihl are invalid
  netfilter: nf_ct_ipv4: handle invalid IPv4 and IPv6 packets consistently
  net/wireless/wext-core.c: add missing kfree
  rtlwifi: Fix oops on rate-control failure
  mac80211: Convert WARN_ON to WARN_ON_ONCE
  rtlwifi: rtl8192de: Fix firmware initialization
  nl80211: ensure interface is up in various APIs
  ...

Pull drm fixes from Dave Airlie:
 "Mostly exynos and intel.

  Intel has 3 regression fixers (more info in intel merge commit), along
  with some other make hw work fixes, exynos has some cleanups and an
  ioctl fix.

  A couple of radeon fixes, couple of build fixes, and a savage
  userspace interface possible overflow fix."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (23 commits)
  drm/exynos: fixed exynos broken ioctl
  drm/i915: clear fencing tracking state when retiring requests
  drm/exynos: fix to pointer manager member of struct exynos_drm_subdrv
  drm/exynos: fix struct for operation callback functions to driver name
  drm/exynos: use define instead of default_win member in struct mixer_context
  drm/exynos: rename s/HDMI_OVERLAY_NUMBER/MIXER_WIN_NR
  drm/exynos: remove unused codes in hdmi and mixer
  drm/exynos: remove unnecessary type conversion of hdmi and mixer
  drm/i915: make rc6 module parameter read-only
  drm/i915: implement ColorBlt w/a
  drm/i915/ringbuffer: Exclude last 2 cachlines of ring on 845g
  Revert "drm/i915: reenable gmbus on gen3+ again"
  drm/radeon: only add the mm i2c bus if the hw_i2c module param is set
  vgaarb.h: fix build warnings
  drm/i915: properly compute dp dithering for user-created modes
  drm/radeon/kms: fix DVO setup on some r4xx chips
  drm/savage: fix integer overflows in savage_bci_cmdbuf()
  drm/radeon: replace udelay with mdelay for long timeouts
  drm/i915: Finish any pending operations on the framebuffer before disabling
  drm/i915: Removed IVB forced enable of sprite dest key.
  ...

Pull a few more fixes for md from NeilBrown:
 "Two are tagged for -stable.  They can cause an oops, but very rarely."

* tag 'md-3.4-fixes' of git://neil.brown.name/md:
  md/bitmap: prevent bitmap_daemon_work running while initialising bitmap
  md/raid1,raid10: Fix calculation of 'vcnt' when processing error recovery.
  MD: Bitmap version cleanup.

Commit 6e6f0a1f ("panic: don't print redundant backtraces on oops")
causes a regression where no stack trace will be printed at all for the
case where kernel code calls panic() directly while not processing an
oops, and of course there are 100's of instances of this type of call.

The original commit executed the check (!oops_in_progress), but this will
always be false because just before the dump_stack() there is a call to
bust_spinlocks(1), which does the following:

  void __attribute__((weak)) bust_spinlocks(int yes)
  {
	if (yes) {
		++oops_in_progress;

The proper way to resolve the problem that original commit tried to
solve is to avoid printing a stack dump from panic() when the either of
the following conditions is true:

  1) TAINT_DIE has been set (this is done by oops_end())
     This indicates and oops has already been printed.
  2) oops_in_progress > 1
     This guards against the rare case where panic() is invoked
     a second time, or in between oops_begin() and oops_end()
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: <stable@vger.kernel.org>	[3.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ST variants of the PL031 all require bit 26 in the control register
to be set before they work properly.  Discovered this when testing on
the Nomadik board where it would suprisingly just stand still.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Cc: Alessandro Rubini <rubini@unipv.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit c38446cc.

Before the commit, the code makes senses to me but not after the commit.
The "nr_reclaimed" is the number of pages reclaimed by scanning through
the memcg's lru lists.  The "nr_to_reclaim" is the target value for the
whole function.  For example, we like to early break the reclaim if
reclaimed 32 pages under direct reclaim (not DEF_PRIORITY).

After the reverted commit, the target "nr_to_reclaim" is decremented each
time by "nr_reclaimed" but we still use it to compare the "nr_reclaimed".
It just doesn't make sense to me...
Signed-off-by: Ying Han <yinghan@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The race is as follows:

Suppose a multi-threaded task forks a new process (on cpu A), thus
bumping up the ref count on all the pages.  While the fork is occurring
(and thus we have marked all the PTEs as read-only), another thread in
the original process (on cpu B) tries to write to a huge page, taking an
access violation from the write-protect and calling hugetlb_cow().  Now,
suppose the fork() fails.  It will undo the COW and decrement the ref
count on the pages, so the ref count on the huge page drops back to 1.
Meanwhile hugetlb_cow() also decrements the ref count by one on the
original page, since the original address space doesn't need it any
more, having copied a new page to replace the original page.  This
leaves the ref count at zero, and when we call unlock_page(), we panic.

	fork on CPU A				fault on CPU B
	=============				==============
	...
	down_write(&parent->mmap_sem);
	down_write_nested(&child->mmap_sem);
	...
	while duplicating vmas
		if error
			break;
	...
	up_write(&child->mmap_sem);
	up_write(&parent->mmap_sem);		...
						down_read(&parent->mmap_sem);
						...
						lock_page(page);
						handle COW
						page_mapcount(old_page) == 2
						alloc and prepare new_page
	...
	handle error
	page_remove_rmap(page);
	put_page(page);
	...
						fold new_page into pte
						page_remove_rmap(page);
						put_page(page);
						...
				oops ==>	unlock_page(page);
						up_read(&parent->mmap_sem);

The solution is to take an extra reference to the page while we are
holding the lock on it.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RTC stores time and date in several registers.  Due to the fact that
these registers can't be read instantaneously, there is a chance that
reading from counting registers gives an error of one minute, one hour,
one day, etc.

To address this issue, the RTC has hardware support to copy the RTC
counting registers to static shadowed registers.  The current
implementation does not use this feature, and in a stress test, we can
reproduce this error at a rate of around two times per 300000 readings.

Fix the implementation to ensure that the right snapshot of time is
captured.
Signed-off-by: Konstantin Shlyakhovoy <x0155534@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: linux-omap <linux-omap@vger.kernel.org>
Acked-by: Mykola Oleksiienko <x0174904@ti.com>
Acked-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@ti.com>
Acked-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Driver data field is a pointer, hence assigning that to an integer results
in compilation warnings.

Fixes following compilation warnings:

  drivers/rtc/rtc-s3c.c: In function `s3c_rtc_get_driver_data':
  drivers/rtc/rtc-s3c.c:452:3: warning: return makes integer from pointer without a cast [enabled by default]
  drivers/rtc/rtc-s3c.c: At top level:
  drivers/rtc/rtc-s3c.c:674:3: warning: initialization makes pointer from integer without a cast [enabled by default]
  drivers/rtc/rtc-s3c.c:674:3: warning: (near initialization for `s3c_rtc_dt_match[1].data') [enabled by default]
  drivers/rtc/rtc-s3c.c:677:3: warning: initialization makes pointer from integer without a cast [enabled by default]
  drivers/rtc/rtc-s3c.c:677:3: warning: (near initialization for `s3c_rtc_dt_match[2].data') [enabled by default]
  drivers/rtc/rtc-s3c.c:680:3: warning: initialization makes pointer from integer without a cast [enabled by default]
  drivers/rtc/rtc-s3c.c:680:3: warning: (near initialization for `s3c_rtc_dt_match[3].data') [enabled by default]
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix this error:

  drivers/rtc/rtc-s3c.c: At top level:
  drivers/rtc/rtc-s3c.c:671:3: error: request for member `data' in something not a structure or union
  drivers/rtc/rtc-s3c.c:674:3: error: request for member `data' in something not a structure or union
  drivers/rtc/rtc-s3c.c:677:3: error: request for member `data' in something not a structure or union
  drivers/rtc/rtc-s3c.c:680:3: error: request for member `data' in something not a structure or union
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add missing maintainer info for PCDP console code.
Signed-off-by: Khalid Aziz <khalid.aziz@hp.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We should use the accessor res_counter_read_u64 for that.

Although a purely cosmetic change is sometimes better delayed, to avoid
conflicting with other people's work, we are starting to have people
touching this code as well, and reproducing the open code behavior
because that's the standard =)

Time to fix it, then.
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

efi_rtc_init() uses platform_driver_probe(), so there's no need to also
set efi_rtc_driver's probe member (as it won't be used anyway).  This
fixes a modpost section mismatch warning (as efi_rtc_probe() validly is
__init).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hwclock refuses to set date/time if RTC registers contain invalid
values.  Check the date/time register values at probe time and
initialize them to make hwclock happy.
Signed-off-by: Andreas Dumberger <andreas.dumberger@tqs.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/proc/sys/kernel/random/boot_id can be read concurrently by userspace
processes.  If two (or more) user-space processes concurrently read
boot_id when sysctl_bootid is not yet assigned, a race can occur making
boot_id differ between the reads.  Because the whole point of the boot id
is to be unique across a kernel execution, fix this by protecting this
operation with a spinlock.

Given that this operation is not frequently used, hitting the spinlock
on each call should not be an issue.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

action != CPU_DEAD || action != CPU_DEAD_FROZEN is always true.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In v3.3-rc1, the global LRU was removed in commit 925b7673 ("mm:
make per-memcg LRU lists exclusive").  The patch fixes up the memcg
docs.

I left the swap session to someone who has better understanding of
'memory+swap'.
Signed-off-by: Ying Han <yinghan@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull irqdomain bug fixes from Grant Likely:
 "This branch fixes a bug in irq_create_mapping() where an error return
  from irq_alloc_desc_from() gets ignored.

  It also removes irq_virq_count to fix a bug on powerpc where the
  irqdomain code does not find irqs allocated above the CONFIG_NR_IRQS
  boundary.

  The remaining patches get rid of an completely pointless export and
  fix some minor bugs in the irqdomain debug output."

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  irq_domain: Move irq_virq_count into NOMAP revmap
  irqdomain: Fix debugfs formatting
  irq_domain: correct the debugfs file name
  irq: Kill pointless irqd_to_hw export
  irq/irq_domain: Quit ignoring error returns from irq_alloc_desc_from().

Pull input updates from Dmitry Torokhov:
 "Just a few small fixes..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: da9052 - fix memory leak in da9052_onkey_probe()
  Input: gpio_mouse - use linux/gpio.h rather than asm/gpio.h
  Input: trackpoint - use psmouse_fmt() for messages
  Input: elantech - v4 is a clickpad, with only one button
  Input: elantech - reset touchpad before configuring it
  Input: sentelic - filter taps in absolute mode
  Input: tps6507x-ts - fix MODULE_ALIAS to match driver name

Pull vfs fixes from Al Viro:
 "Regression fix in mtdchar_open(), fix for a really old leak
  (almost never hit in practice - it's a b0rken failure exit in
  simple_fill_super()) and a typo fix in vfs.txt (misspelled
  method type)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  typo fix in Documentation/filesystems/vfs.txt
  dentry leak in simple_fill_super() failure exit
  fix breakage in mtdchar_open(), sanitize failure exits

Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung into drm-intel-fixes

* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung:
  drm/exynos: fixed exynos broken ioctl
  drm/exynos: fix to pointer manager member of struct exynos_drm_subdrv
  drm/exynos: fix struct for operation callback functions to driver name
  drm/exynos: use define instead of default_win member in struct mixer_context
  drm/exynos: rename s/HDMI_OVERLAY_NUMBER/MIXER_WIN_NR
  drm/exynos: remove unused codes in hdmi and mixer
  drm/exynos: remove unnecessary type conversion of hdmi and mixer
  drm/exynos: add format list of plane
  drm/exynos: fixed duplicated page allocation bug.
  drm/exynos: fixed page align and code clean.

Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-intel-fixes

Daniel Vetter writes:
3 regression fixes:
- disable gmbus again, too broken for 3.4, we'll try again for 3.5
- dp bandwidth computation fix, we've lost the 6bpc dithering flag
 sometimes, this is a 3.3 regression (maybe even earlier for some
 configurations).
- fix resume regression caused by the gen2/3 fencing fix merged into -rc2.

And a few other fixes:
- gpu hang fix for i845 (Chris)
- sprite fix (Armin Reese)
- crtc disable vs. scanlinewait race fix (Chris)
- rc6 module option read-only, it confused testers (Jesse)
- fbc related blitter death hw workaround, note that we disable fbc on snb
 by default anyway.

With these fixes we have one 3.4 regression outstanding: One of the
cleanup patches for the interlaced support managed to confuse the lvds
panel fitter when upscaling. The root-cause is still unclear, but test
patches are awaiting feedback from the reporter.

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: clear fencing tracking state when retiring requests
  drm/i915: make rc6 module parameter read-only
  drm/i915: implement ColorBlt w/a
  drm/i915/ringbuffer: Exclude last 2 cachlines of ring on 845g
  Revert "drm/i915: reenable gmbus on gen3+ again"
  drm/i915: properly compute dp dithering for user-created modes
  drm/i915: Finish any pending operations on the framebuffer before disabling
  drm/i915: Removed IVB forced enable of sprite dest key.

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

this patch removes the pointer of uint64_t *edid. it should be just
a uint64_t.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

This fixes a resume regression introduced in

commit 7dd49065
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Mar 21 10:48:18 2012 +0000

    drm/i915: Mark untiled BLT commands as fenced on gen2/3

which fixed fencing tracking for untiled blt commands.

A side effect of that patch was that now also untiled objects have a
non-zero obj->last_fenced_seqno to track when a fence can be set up
after a pipelined tiling change. Unfortunately this was only cleared
by the fence setup and teardown code, resulting in tons of untiled but
inactive objects with non-zero last_fenced_seqno.

Now after resume we completely reset the seqno tracking, both on the
driver side (by setting dev_priv->next_seqno = 1) and on the hw side
(by allocating a new hws page, which contains the seqnos). Hilarity
and indefinite waits ensued from the stale seqnos in
obj->last_fenced_seqno from before the suspend.

The fix is to properly clear the fencing tracking state like we
already do for the normal gpu rendering while moving objects off the
active list.
Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This patch replaces the old global setting of irq_virq_count that is only
used by the NOMAP mapping and instead uses a revmap_data property so that
the maximum NOMAP allocation can be set per NOMAP irq_domain.

There is exactly one user of irq_virq_count in-tree right now: PS3.
Also, irq_virq_count is only useful for the NOMAP mapping.  So,
instead of having a single global irq_virq_count values, this change
drops it entirely and added a max_irq argument to irq_domain_add_nomap().
That makes it a property of an individual nomap irq domain instead of
a global system settting.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Milton Miller <miltonm@bga.com>

If a bitmap is added while the array is active, it is possible
for bitmap_daemon_work to run while the bitmap is being
initialised.
This is particularly a problem if bitmap_daemon_work sees
bitmap->filemap as non-NULL before it has been filled in properly.
So hold bitmap_info.mutex while filling in ->filemap
to prevent problems.

This patch is suitable for any -stable kernel, though it might not
apply cleanly before about 3.1.

Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>

If r1bio->sectors % 8 != 0,then the memcmp and a later
memcpy will omit the last bio_vec.

This is suitable for any stable kernel since 3.1 when bad-block
management was introduced.

Cc: stable@vger.kernel.org
Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>

bitmap_new_disk_sb() would still create V3 bitmap superblock
with host-endian layout.

Perhaps I'm confused, but shouldn't bitmap_new_disk_sb() be
creating a V4 bitmap superblock instead, that is portable,
as per comment in bitmap.h?
Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>

The struct exynos_drm_manager has to exist for exynos drm sub driver
using encoder and connector. If it isn't NULL to member of struct
exynos_drm_subdrv, will create encoder and connector else will not. And
the is_local member also doesn't need.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The mixer driver and hdmi driver have each operation callback functions
and they is registered to hdmi common driver. Their struct names in hdmi
common driver include display, manager and overlay. It confuses to
appear whose operation and two driver cannot register same operation
callback functions at the same time. Use their struct names to driver
name.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The default_win member in struct mixer_context isn't change its value
after initialized to 0, so it's better using to define.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

HDMI_OVERLAY_NUMBER is specific of mixer driver and be used "windows
layer" term in exynos user manaual, so rename it.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Some members in struct mixer_context aren't used and the define
HDMI_OVERLAY_NUMBER is unused in hdmi driver, remove them.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

When the void pointer type variable is assigned to the specific pointer
type variable, don't need to do type conversion.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

If, in drivers/input/misc/da9052_onkey.c::da9052_onkey_probe(), the
call to either kzalloc() or input_allocate_device() fails then we will
return -ENOMEM from the function without freeing the other allocation
that may have succeeded, thus we leak either the memory allocated for
'onkey' or the memory allocated for 'input_dev' if one succeeds and
the other fails.
Fix that by jumping to the 'err_free_mem' label at the end of the
function that properly cleans up rather than returning directly.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Pull powerpc fixes from Benjamin Herrenschmidt:
 "Fixes for two nasty regression affecting powerpc in 3.4."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix typo in runlatch code
  powerpc: Fix page fault with lockdep regression

Pull infiniband fixes from Roland Dreier:
 "Fix a regression in the /sys/class/infiniband/.../rate attribute --
  old kernels used to just return something, even if the underlying
  value was out-of-bounds, while 3.4-rc1 returned EINVAL to userspace.
  This breaks some applications that check for the error, so go back to
  the old behavior."

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/core: Don't return EINVAL from sysfs rate attribute for invalid speeds
  IB/mlx4: Don't return an invalid speed when a port is down