- 16 Feb, 2015 28 commits
-
-
Randy Wright authored
commit a4714a89 upstream. Use acpi_os_map_generic_address to pre-map the reset register if it is memory mapped, thereby preventing the BUG_ON() in line 1319 of mm/vmalloc.c from triggering during panic-triggered reboots. Link: https://bugzilla.kernel.org/show_bug.cgi?id=77131Signed-off-by: Randy Wright <rwright@hp.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> [rjw: Changelog, simplified code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
James Custer authored
commit fa2a79ce upstream. In init_per_cpu(), when get_cpu_topology() fails, init_per_cpu_tunables() is not called afterwards. This means that bau_control->statp is NULL. If a user then reads /proc/sgi_uv/ptc_statistics ptc_seq_show() references a NULL pointer. Therefore, since uv_bau_init calls set_bau_off when init_per_cpu() fails, we add code that detects when the bau is off in ptc_seq_show() to avoid referencing a NULL pointer. Signed-off-by: James Custer <jcuster@sgi.com> Cc: Russ Anderson <rja@sgi.com> Link: http://lkml.kernel.org/r/1414952199-185319-2-git-send-email-jcuster@sgi.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Eric Paris authored
commit b138004e upstream. The /sys/fs/selinux/policy file is not valid on big endian systems like ppc64 or s390. Let's see why: static int hashtab_cnt(void *key, void *data, void *ptr) { int *cnt = ptr; *cnt = *cnt + 1; return 0; } static int range_write(struct policydb *p, void *fp) { size_t nel; [...] /* count the number of entries in the hashtab */ nel = 0; rc = hashtab_map(p->range_tr, hashtab_cnt, &nel); if (rc) return rc; buf[0] = cpu_to_le32(nel); rc = put_entry(buf, sizeof(u32), 1, fp); So size_t is 64 bits. But then we pass a pointer to it as we do to hashtab_cnt. hashtab_cnt thinks it is a 32 bit int and only deals with the first 4 bytes. On x86_64 which is little endian, those first 4 bytes and the least significant, so this works out fine. On ppc64/s390 those first 4 bytes of memory are the high order bits. So at the end of the call to hashtab_map nel has a HUGE number. But the least significant 32 bits are all 0's. We then pass that 64 bit number to cpu_to_le32() which happily truncates it to a 32 bit number and does endian swapping. But the low 32 bits are all 0's. So no matter how many entries are in the hashtab, big endian systems always say there are 0 entries because I screwed up the counting. The fix is easy. Use a 32 bit int, as the hashtab_cnt expects, for nel. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Hannes Reinecke authored
commit 41abc4e1 upstream. When creating new devices dm_sync_table() calls synchronize_rcu_expedited(), causing _all_ pending RCU pointers to be flushed. This causes a latency overhead that is especially noticeable when creating lots of devices. And all of this is pointless as there are no old maps to be disconnected, and hence no stale pointers which would need to be cleared up. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Jiri Slaby authored
commit 91905b6f upstream. When the parport_pc module is removed from the system, all parport devices are iterated in parport_pc_exit and removed by a call to parport_pc_unregister_port. Note that some parport devices have its 'struct device' parent, known as port->dev. And when port->dev is a platform device, it is destroyed in parport_pc_exit too. Now, when parport_pc_unregister_port is called for a going port, drv->detach(port) is called for every parport driver in the system. ppdev can be one of them. ppdev's detach() tears down its per-port sysfs directory, which established port->dev as a parent earlier. But since parport_pc_exit kills port->dev parents before unregisters ports proper, ppdev's sysfs directory has no living parent anymore. This results in the following warning: WARNING: CPU: 1 PID: 785 at fs/sysfs/group.c:219 sysfs_remove_group+0x9b/0xa0 sysfs group ffffffff81c69e20 not found for kobject 'parport1' Modules linked in: parport_pc(E-) ppdev(E) [last unloaded: ppdev] CPU: 1 PID: 785 Comm: rmmod Tainted: G W E 3.18.0-rc5-next-20141120+ #824 ... Call Trace: ... [<ffffffff810aff76>] warn_slowpath_fmt+0x46/0x50 [<ffffffff8123d81b>] sysfs_remove_group+0x9b/0xa0 [<ffffffff814c27e7>] dpm_sysfs_remove+0x57/0x60 [<ffffffff814b6ac9>] device_del+0x49/0x240 [<ffffffff814b6ce2>] device_unregister+0x22/0x70 [<ffffffff814b6dac>] device_destroy+0x3c/0x50 [<ffffffffc012209a>] pp_detach+0x4a/0x60 [ppdev] [<ffffffff814b32dd>] parport_remove_port+0x11d/0x150 [<ffffffffc0137328>] parport_pc_unregister_port+0x28/0xf0 [parport_pc] [<ffffffffc0138c0e>] parport_pc_exit+0x76/0x468 [parport_pc] [<ffffffff81128dbc>] SyS_delete_module+0x18c/0x230 It is also easily reproducible on qemu with two dummy ports '-parallel /dev/null -parallel /dev/null'. So switch the order of killing the two structures. But since port is freed by parport_pc_unregister_port, we have to remember port->dev in a local variable. Perhaps nothing worse than the warning happens thanks to the device refcounting. We *should* be on the safe side. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Martin Pluskal <mpluskal@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Jesse Barnes authored
commit 7bd40c16 upstream. We've always been able to use either method on VLV, but it appears more recent BIOSes only support the gen6 method, so switch over to that. References: https://bugs.freedesktop.org/show_bug.cgi?id=71370Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Jan Kara authored
commit e237ec37 upstream. Check that length specified in a component of a symlink fits in the input buffer we are reading. Also properly ignore component length for component types that do not use it. Otherwise we read memory after end of buffer for corrupted udf image. Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no> CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Jan Kara authored
commit 0e5cc9a4 upstream. Symlink reading code does not check whether the resulting path fits into the page provided by the generic code. This isn't as easy as just checking the symlink size because of various encoding conversions we perform on path. So we have to check whether there is still enough space in the buffer on the fly. CC: stable@vger.kernel.org Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Jan Kara authored
commit e159332b upstream. Verify that inode size is sane when loading inode with data stored in ICB. Otherwise we may get confused later when working with the inode and inode size is too big. CC: stable@vger.kernel.org Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Goldwyn Rodrigues authored
commit 86b9c6f3 upstream. Filesize is not a good indication that the file needs to be synced. An example where this breaks is: 1. Open the file in O_SYNC|O_RDWR 2. Read a small portion of the file (say 64 bytes) 3. Lseek to starting of the file 4. Write 64 bytes If the node crashes, it is not written out to disk because this was not committed in the journal and the other node which reads the file after recovery reads stale data (even if the write on the other node was successful) Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Trond Myklebust authored
commit 2fc193cf upstream. The callback handler xs_error_report() can end up propagating an EPIPE error by means of the call to xprt_wake_pending_tasks(). Ensure that xprt_connect_status() does not automatically convert this into an EIO error. Reported-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Trond Myklebust authored
commit 3601c4a9 upstream. Currently, an ENOBUFS error will result in a fatal error for the RPC call. Normally, we will just want to wait and then retry. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Steve Dickson authored
commit 1fa3e2eb upstream. Don't schedule an rpc_delay before checking to see if the task is a SOFTCONN because the tk_callback from the delay (__rpc_atrun) clears the task status before the rpc_exit_task can be run. Signed-off-by: Steve Dickson <steved@redhat.com> Fixes: 561ec160 (SUNRPC: call_connect_status should recheck...) Link: http://lkml.kernel.org/r/5329CF7C.7090308@RedHat.comSigned-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Trond Myklebust authored
commit 485f2251 upstream. When the server is unavailable due to a networking error, etc, we want the RPC client to respect the timeout delays when attempting to reconnect. Reported-by: Neil Brown <neilb@suse.de> Fixes: 561ec160 (SUNRPC: call_connect_status should recheck bind..) Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Trond Myklebust authored
commit df277270 upstream. Ensure that call_bind_status, call_connect_status, call_transmit_status and call_status all are capable of handling ECONNABORTED and EHOSTUNREACH. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Trond Myklebust authored
commit 0fe8d04e upstream. Currently, xprt_connect_status will convert connection error values such as ECONNREFUSED, ECONNRESET, ... into EIO, which means that they never get handled. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Trond Myklebust authored
commit 561ec160 upstream. Currently, we go directly to call_transmit which sends us to call_status on error. If we know that the connect attempt failed, we should rather just jump straight back to call_bind and call_connect. Ditto for EAGAIN, except do not delay. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
David Rientjes authored
commit c6c8fe79 upstream. rpc_malloc() allocates with GFP_NOWAIT without making any attempt at reclaim so it easily fails when low on memory. This ends up spamming the kernel log: SLAB: Unable to allocate memory on node 0 (gfp=0x4000) cache: kmalloc-8192, object size: 8192, order: 1 node 0: slabs: 207/207, objs: 207/207, free: 0 rekonq: page allocation failure: order:1, mode:0x204000 CPU: 2 PID: 14321 Comm: rekonq Tainted: G O 3.15.0-rc3-12.gfc9498b-desktop+ #6 Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 2105 07/23/2010 0000000000000000 ffff880010ff17d0 ffffffff815e693c 0000000000204000 ffff880010ff1858 ffffffff81137bd2 0000000000000000 0000001000000000 ffff88011ffebc38 0000000000000001 0000000000204000 ffff88011ffea000 Call Trace: [<ffffffff815e693c>] dump_stack+0x4d/0x6f [<ffffffff81137bd2>] warn_alloc_failed+0xd2/0x140 [<ffffffff8113be19>] __alloc_pages_nodemask+0x7e9/0xa30 [<ffffffff811824a8>] kmem_getpages+0x58/0x140 [<ffffffff81183de6>] fallback_alloc+0x1d6/0x210 [<ffffffff81183be3>] ____cache_alloc_node+0x123/0x150 [<ffffffff81185953>] __kmalloc+0x203/0x490 [<ffffffffa06b0ee2>] rpc_malloc+0x32/0xa0 [sunrpc] [<ffffffffa06a6999>] call_allocate+0xb9/0x170 [sunrpc] [<ffffffffa06b19d8>] __rpc_execute+0x88/0x460 [sunrpc] [<ffffffffa06b2da9>] rpc_execute+0x59/0xc0 [sunrpc] [<ffffffffa06a932b>] rpc_run_task+0x6b/0x90 [sunrpc] [<ffffffffa077b5c1>] nfs4_call_sync_sequence+0x51/0x80 [nfsv4] [<ffffffffa077d45d>] _nfs4_do_setattr+0x1ed/0x280 [nfsv4] [<ffffffffa0782a72>] nfs4_do_setattr+0x72/0x180 [nfsv4] [<ffffffffa078334c>] nfs4_proc_setattr+0xbc/0x140 [nfsv4] [<ffffffffa074a7e8>] nfs_setattr+0xd8/0x240 [nfs] [<ffffffff811baa71>] notify_change+0x231/0x380 [<ffffffff8119cf5c>] chmod_common+0xfc/0x120 [<ffffffff8119df80>] SyS_chmod+0x40/0x90 [<ffffffff815f4cfd>] system_call_fastpath+0x1a/0x1f ... If the allocation fails, simply return NULL and avoid spamming the kernel log. Reported-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Len Brown authored
commit 2194324d upstream. Linux uses CPUID.MWAIT.EDX to validate the C-states reported by ACPI, silently discarding states which are not supported by the HW. This test is too restrictive, as some HW now uses sparse sub-state numbering, so the sub-state number may be higher than the number of sub-states... Also, rather than silently ignoring an invalid state, we should complain about a firmware bug. In practice... Bay Trail systems originally supported C6-no-shrink as MWAIT sub-state 0x58, and in CPUID.MWAIT.EDX 0x03000000 indicated that there were 3 MWAIT-C6 sub-states. So acpi_idle would discard that C-state because 8 >= 3. Upon discovering this issue, the ucode was updated so that C6-no-shrink was also exported as 0x51, and the BIOS was updated to match. However, systems shipped with 0x58, will never get a BIOS update, and this patch allows Linux to see C6-no-shrink on early Bay Trail. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Manfred Spraul authored
commit 2e094abf upstream. When I fixed bugs in the sem_lock() logic, I was more conservative than necessary. Therefore it is safe to replace the smp_mb() with smp_rmb(). And: With smp_rmb(), semop() syscalls are up to 10% faster. The race we must protect against is: sem->lock is free sma->complex_count = 0 sma->sem_perm.lock held by thread B thread A: A: spin_lock(&sem->lock) B: sma->complex_count++; (now 1) B: spin_unlock(&sma->sem_perm.lock); A: spin_is_locked(&sma->sem_perm.lock); A: XXXXX memory barrier A: if (sma->complex_count == 0) Thread A must read the increased complex_count value, i.e. the read must not be reordered with the read of sem_perm.lock done by spin_is_locked(). Since it's about ordering of reads, smp_rmb() is sufficient. [akpm@linux-foundation.org: update sem_lock() comment, from Davidlohr] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Nadav Amit authored
commit bf0b682c upstream. If the operand size is not 64-bit, then the sysexit instruction should assign ECX to RSP and EDX to RIP. The current code assigns the full 64-bits. Fix it by masking. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Nadav Amit authored
commit 4566654b upstream. Guest which sets the PAT CR to invalid value should get a #GP. Currently, if vmx supports loading PAT CR during entry, then the value is not checked. This patch makes the required check in that case. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Nadav Amit authored
commit 040c8dc8 upstream. In 64-bit mode a #GP should be delivered to the guest "if the code segment descriptor pointed to by the selector in the 64-bit gate doesn't have the L-bit set and the D-bit clear." - Intel SDM "Interrupt 13—General Protection Exception (#GP)". This patch fixes the behavior of CS loading emulation code. Although the comment says that segment loading is not supported in long mode, this function is executed in long mode, so the fix is necassary. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Nadav Amit authored
commit 58b7075d upstream. In 64-bit, stack operations default to 64-bits, but can be overriden (to 16-bit) using opsize override prefix. In contrast, near-branches are always 64-bit. This patch distinguish between the different behaviors. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Nadav Amit authored
commit f7784046 upstream. Breaking grp45 to the relevant functions to speed up the emulation and simplify the code. In addition, it is necassary the next patch will distinguish between far and near branches according to the flags. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Nadav Amit authored
commit d1442d85 upstream. Far jmp/call/ret may fault while loading a new RIP. Currently KVM does not handle this case, and may result in failed vm-entry once the assignment is done. The tricky part of doing so is that loading the new CS affects the VMCS/VMCB state, so if we fail during loading the new RIP, we are left in unconsistent state. Therefore, this patch saves on 64-bit the old CS descriptor and restores it if loading RIP failed. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Nadav Amit authored
commit dd598091 upstream. The KVM emulator code assumes that the guest virtual address space (in 64-bit) is 48-bits wide. Since we are about to add more code that makes the same assumption, this patch adds an assertion to make sure guest virtual address space is indeed 48-bits wide. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Adam Lee authored
commit c561a575 upstream. BugLink: https://bugs.launchpad.net/bugs/1400215 ath3k devices fail to load firmwares on xHCI buses, but work well on EHCI, this might be a compatibility issue between xHCI and ath3k chips. As my testing result, those chips will work on xHCI buses again with this patch. This workaround is from Qualcomm, they also did some workarounds in Windows driver. Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
- 13 Feb, 2015 2 commits
-
-
Austin Lund authored
commit a8f29e89 upstream. Userspace expects to see a long space before the first pulse is sent on the lirc device. Currently, if a long time has passed and a new packet is started, the lirc codec just returns and doesn't send anything. This makes lircd ignore many perfectly valid signals unless they are sent in quick sucession. When a reset event is delivered, we cannot know anything about the duration of the space. But it should be safe to assume it has been a long time and we just set the duration to maximum. Signed-off-by: Austin Lund <austin.lund@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Alex Elder authored
commit 638c323c upstream. Olivier Bonvalet reported having repeated crashes due to a failed assertion he was hitting in rbd_img_obj_callback(): Assertion failure in rbd_img_obj_callback() at line 2165: rbd_assert(which >= img_request->next_completion); With a lot of help from Olivier with reproducing the problem we were able to determine the object and image requests had already been completed (and often freed) at the point the assertion failed. There was a great deal of discussion on the ceph-devel mailing list about this. The problem only arose when there were two (or more) object requests in an image request, and the problem was always seen when the second request was being completed. The problem is due to a race in the window between setting the "done" flag on an object request and checking the image request's next completion value. When the first object request completes, it checks to see if its successor request is marked "done", and if so, that request is also completed. In the process, the image request's next_completion value is updated to reflect that both the first and second requests are completed. By the time the second request is able to check the next_completion value, it has been set to a value *greater* than its own "which" value, which caused an assertion to fail. Fix this problem by skipping over any completion processing unless the completing object request is the next one expected. Test only for inequality (not >=), and eliminate the bad assertion. Tested-by: Olivier Bonvalet <ob@daevel.fr> Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Sage Weil <sage@inktank.com> Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
- 10 Feb, 2015 10 commits
-
-
Saran Maruti Ramanara authored
[ Upstream commit cfbf654e ] When making use of RFC5061, section 4.2.4. for setting the primary IP address, we're passing a wrong parameter header to param_type2af(), resulting always in NULL being returned. At this point, param.p points to a sctp_addip_param struct, containing a sctp_paramhdr (type = 0xc004, length = var), and crr_id as a correlation id. Followed by that, as also presented in RFC5061 section 4.2.4., comes the actual sctp_addr_param, which also contains a sctp_paramhdr, but this time with the correct type SCTP_PARAM_IPV{4,6}_ADDRESS that param_type2af() can make use of. Since we already hold a pointer to addr_param from previous line, just reuse it for param_type2af(). Fixes: d6de3097 ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT") Signed-off-by: Saran Maruti Ramanara <saran.neti@telus.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Florian Westphal authored
[ Upstream commit e2a4800e ] When we've run out of space in the output buffer to store more data, we will call zlib_deflate with a NULL output buffer until we've consumed remaining input. When this happens, olen contains the size the output buffer would have consumed iff we'd have had enough room. This can later cause skb_over_panic when ppp_generic skb_put()s the returned length. Reported-by: Iain Douglas <centos@1n6.org.uk> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Eric Dumazet authored
[ Upstream commit bdbbb852 ] In commit be9f4a44 ("ipv4: tcp: remove per net tcp_sock") I tried to address contention on a socket lock, but the solution I chose was horrible : commit 3a7c384f ("ipv4: tcp: unicast_sock should not land outside of TCP stack") addressed a selinux regression. commit 0980e56e ("ipv4: tcp: set unicast_sock uc_ttl to -1") took care of another regression. commit b5ec8eea ("ipv4: fix ip_send_skb()") fixed another regression. commit 811230cd ("tcp: ipv4: initialize unicast_sock sk_pacing_rate") was another shot in the dark. Really, just use a proper socket per cpu, and remove the skb_orphan() call, to re-enable flow control. This solves a serious problem with FQ packet scheduler when used in hostile environments, as we do not want to allocate a flow structure for every RST packet sent in response to a spoofed packet. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Eric Dumazet authored
[ Upstream commit 811230cd ] When I added sk_pacing_rate field, I forgot to initialize its value in the per cpu unicast_sock used in ip_send_unicast_reply() This means that for sch_fq users, RST packets, or ACK packets sent on behalf of TIME_WAIT sockets might be sent to slowly or even dropped once we reach the per flow limit. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 95bd09eb ("tcp: TSO packets automatic sizing") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Roopa Prabhu authored
[ Upstream commit 59ccaaaa ] Reported in: https://bugzilla.kernel.org/show_bug.cgi?id=92081 This patch avoids calling rtnl_notify if the device ndo_bridge_getlink handler does not return any bytes in the skb. Alternately, the skb->len check can be moved inside rtnl_notify. For the bridge vlan case described in 92081, there is also a fix needed in bridge driver to generate a proper notification. Will fix that in subsequent patch. v2: rebase patch on net tree Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Christoph Hellwig authored
[ Upstream commit 06539d30 ] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Govindarajulu Varadarajan authored
[ Upstream commit 24e579c8 ] With the commit d75b1ade ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. When in busy_poll is we return 0 in napi_poll. We should return budget. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Hannes Frederic Sowa authored
[ Upstream commit 6e9e16e6 ] Lubomir Rintel reported that during replacing a route the interface reference counter isn't correctly decremented. To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>: | [root@rhel7-5 lkundrak]# sh -x lal | + ip link add dev0 type dummy | + ip link set dev0 up | + ip link add dev1 type dummy | + ip link set dev1 up | + ip addr add 2001:db8:8086::2/64 dev dev0 | + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20 | + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10 | + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20 | + ip link del dev0 type dummy | Message from syslogd@rhel7-5 at Jan 23 10:54:41 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 | | Message from syslogd@rhel7-5 at Jan 23 10:54:51 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 During replacement of a rt6_info we must walk all parent nodes and check if the to be replaced rt6_info got propagated. If so, replace it with an alive one. Fixes: 4a287eba ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag") Reported-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
subashab@codeaurora.org authored
[ Upstream commit fc752f1f ] An exception is seen in ICMP ping receive path where the skb destructor sock_rfree() tries to access a freed socket. This happens because ping_rcv() releases socket reference with sock_put() and this internally frees up the socket. Later icmp_rcv() will try to free the skb and as part of this, skb destructor is called and which leads to a kernel panic as the socket is freed already in ping_rcv(). -->|exception -007|sk_mem_uncharge -007|sock_rfree -008|skb_release_head_state -009|skb_release_all -009|__kfree_skb -010|kfree_skb -011|icmp_rcv -012|ip_local_deliver_finish Fix this incorrect free by cloning this skb and processing this cloned skb instead. This patch was suggested by Eric Dumazet Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Herbert Xu authored
[ Upstream commit 86f3cddb ] While working on rhashtable walking I noticed that the UDP diag dumping code is buggy. In particular, the socket skipping within a chain never happens, even though we record the number of sockets that should be skipped. As this code was supposedly copied from TCP, this patch does what TCP does and resets num before we walk a chain. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-