- 07 Nov, 2011 24 commits
-
-
Michael Krufky authored
As done first in lgdt330x.c, calculate signal strength from SNR up to 35dB Even though the SNR can go higher than 35dB, there is some comfort factor in having a range of strong signals that can show at 100% Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Julia Lawall authored
In the original code, probe_out could be reached when res was null and then when the irq had not yet been requested. In those cases, the call to free_irq is not needed, so move probe_out down and introduce a new label for the case where calling free_irq is useful. The semantic match that finds this problem is as follows: // <smpl> @r@ expression E, E1; identifier f; statement S1,S2,S3; @@ if (E == NULL) { ... when != if (E == NULL || ...) S1 else S2 when != E = E1 *E->f ... when any return ...; } else S3 // </smpl> Signed-off-by:Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
The variable isi might be null or might be freed at the point of the call to clk_put. pclk contains the value that isi->pclk is expected to point to. The semantic match that finds this problem is as follows: // <smpl> @r@ expression E, E1; identifier f; statement S1,S2,S3; @@ if (E == NULL) { ... when != if (E == NULL || ...) S1 else S2 when != E = E1 *E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: -
Christian Gmeiner authored
The ADV7170/ADV7171 can operate in either 8-bit or 16-bit YCrCb Mode. * 8-Bit YCrCb Mode This default mode accepts multiplexed YCrCb inputs through the P7-P0 pixel inputs. The inputs follow the sequence Cb0, Y0 Cr0, Y1 Cb1, Y2, etc. The Y, Cb and Cr data are input on a rising clock edge. * 16-Bit YCrCb Mode This mode accepts Y inputs through the P7–P0 pixel inputs and multiplexed CrCb inputs through the P15–P8 pixel inputs. The data is loaded on every second rising edge of CLOCK. The inputs follow the sequence Cb0, Y0 Cr0, Y1 Cb1, Y2, etc. Signed-off-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by:
-
Dmitri Belimov authored
Write AUX byte to FM1216ME_MK3 when FM mode, better sensitivity. It can be usefull for other tuners. Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Daniel Drake authored
The RGB mode does not work correctly. It captures fine at 640x480 but whenever the scaling engine is used to produce another resolution, color corruption occurs (lots of erroneous pink and green). It is not clear how the scaling engine is supposed to work and how it knows which pixel format it is dealing with. Work around this problem by disabling RGB support. YUYV scaling works just fine. Test case: gst-launch v4l2src ! video/x-raw-rgb,bpp=16,width=320,height=240 ! \ ffmpegcolorspace ! xvimagesink Signed-off-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Re-run the cardlist script, in order to update the cardlists for a few drivers, to sync with the driver changes. Signed-off-by: -
sensoray-dev authored
commit affebd4db94b459f676a14d9bb696c3c2b73643d [media] bttv: adding Sensoray 611 board to bttv driver Signed-off-by:
Dean Anderson <linux-dev@sensoray.com> Signed-off-by:
-
sensoray-dev authored
commit cf5886c3dd2f65c817cb6ca5e7202fa3a3bdc872 Signed-off-by:
-
Laurent Pinchart authored
The MT9P031 and MT9T001 sensors transfer 16-bit data on the I2C bus in swapped order. Let the I2C core handle byte order by using the i2c_smbus_{read|write}_word_swapped() functions. Signed-off-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Archit Taneja authored
There is no limit to the number of displays that can registered with DSS2. The current value of MAX_DISPLAYS is 3, set this to 10 so that the 'displays' member of omap2video_device struct can store more omap_dss_device pointers. This fixes a crash seen in omap_vout_probe when DSS2 registers for more than 3 displays. Signed-off-by:
Archit Taneja <archit@ti.com> Acked-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
-
Archit Taneja authored
Add support for DSI panels. DSI video mode panels will work directly. For command mode panels, we will need to trigger updates regularly. This isn't done by the omap_vout driver currently. It can still be supported if we connect a framebuffer device to the panel and configure it in auto update mode. Signed-off-by:
-
Archit Taneja authored
Currently, in omap_vout_isr(), if the panel type is DPI, and if we get either VSYNC or VSYNC2 interrupts, we proceed ahead to set the current buffers state to VIDEOBUF_DONE and prepare to display the next frame in the queue. On OMAP4, because we have 2 LCD managers, the panel type itself is not sufficient to tell if we have received the correct irq, i.e, we shouldn't proceed ahead if we get a VSYNC interrupt for LCD2 manager, or a VSYNC2 interrupt for LCD manager. Fix this by correlating LCD manager to VSYNC interrupt and LCD2 manager to VSYNC2 interrupt. Signed-off-by:
Sumit Semwal <sumit.semwal@ti.com> Acked-by:
-
Archit Taneja authored
Currently, there is a lot of redundant code is between DPI and VENC panels, this can be made common by moving out field/interlace specific code to a separate function called omapvid_handle_interlace_display(). There is no functional change made. Signed-off-by:
-
Archit Taneja authored
The commit 383e4f69 makes reqbuf prevent requesting a larger size buffer than what is allocated at kernel boot during omap_vout_probe. In omap_vout_buffer_setup callback API, the requested size is compared with vout->buffer_size, this isn't correct as vout->buffer_size is later set to the size requested in reqbuf. When the video device is opened the next time, this check will prevent us to allocate a buffer which is larger than what we requested the last time. Don't use vout->buffer_size, always check with the parameters video1_bufsize or video2_bufsize. Signed-off-by:
-
Jonathan Cameron authored
Function ensures that error codes don't get mangled. Dependant on: which is working it's way through the i2c tree. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Acked-by:
-
Antti Palosaari authored
Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
DNOD44CDH086A (NXP TDA18212) tuner module is not connected to demodulator I2C gate. Instead demodulator gate it uses external GPIO driven gate. Override demodulator I2C gate control with own in that case. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Hans Verkuil authored
The Makefile used := instead of +=, this broke the compatibility build. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
This header clashes with the jpeg.h in gspca when doing a compatibility build using the media_build system. Signed-off-by:
-
- 03 Nov, 2011 16 commits
-
-
Timo Kokkonen authored
If the said config optio is not set, the compiler will spill out many warnings about statements with no effect, such as: Casting the zero to void will cure the warning. Signed-off-by:
Timo Kokkonen <kaapeli@itanic.dy.fi> Signed-off-by:
-
Malcolm Priestley authored
Support for single ITE 9135 device. Only single devices have been tested. Dual ITE 9135 devices should work, but have not been tested. TODOs support for ver 2 chip config for other tuner types. rework of firmware file. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Teka authored
Hi, This is a little patch to support Terratec G1 (based on Terratec Grabby). It works perfectly on my pc (Ubuntu 11.04 / Kernel 2.6.38). Best regards, Signed-off-by: -
Dan Carpenter authored
If "i" is 2 then when we call cx25821_video_mux() we'd end up going past the end of the cx25821_boards[dev->board]->input[]. The INPUT() macro obfuscates what's going on in that function so it's a bit hard to follow. And as Mauro points out the hard coded 2 is not very helpful. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Paul Bolle authored
The Kconfig symbol RADIO_TEA5764_XTAL is unused. The code does use a RADIO_TEA5764_XTAL macro, but does that rather peculiar. But there seems to be a way to keep both. (The easiest way out would be to rip out both the Kconfig symbol and the macro.) Note there's also a module parameter 'use_xtal' to influence all this. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
The crop rectangle takes the preview engine internal cropping requirements into account. The smallest allowable margins are 14 columns and 8 rows when reading from memory, and 18 columns and 8 rows when processing data on the fly from the CCDC. Signed-off-by:
-
Laurent Pinchart authored
The macros that define the minimum/maximum input and output sizes are defined in seperate files and have no consistent naming. In preparation for preview engine cropping support, move them all to isppreview.c and rename them to PREV_{MIN|MAX}_{IN|OUT}_{WIDTH|HEIGHT}*. Remove unused and/or unneeded local variables that store the maximum output width. Signed-off-by: -
Laurent Pinchart authored
The horizontal averager isn't used and will get in the way when implementing cropping support on the input pad. Remove it, it can be added back later if needed. Signed-off-by:
-
Laurent Pinchart authored
Set the media_device::hw_revision field to the ISP revision number. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Guennadi Liakhovetski authored
Trivial arithmetics clean up. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
-
Laurent Pinchart authored
Make sure all modules init functions clean up after themselves in case of error. Signed-off-by:
-
Laurent Pinchart authored
Mutexes must be destroyed with mutex_destroy(). Add missing calls in the modules cleanup handlers. Signed-off-by:
-
Laurent Pinchart authored
Group all init/cleanup functions together to make the code more readable. Signed-off-by:
-
Laurent Pinchart authored
The media_entity_cleanup() function belong to the module cleanup handlers, not the entity registration handlers. Move it there. Create a omap3isp_video_cleanup() function to cleanup the video node entity, and call it from the module cleanup handlers. Rename omap3isp_stat_free() to omap3isp_stat_cleanup(). Signed-off-by:
-
Sachin Kamat authored
This patch renames the MFC firmware binary to avoid SoC name in it. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
