- 09 Jul, 2018 20 commits
-
-
Jesus Sanchez-Palencia authored
We are not supposed to use u32 in uapi, so change the flags member of struct sock_txtime from u32 to __u32 instead. Fixes: 80b14dee ("net: Add a new socket option for a future transmit time") Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
aIdo Schimmel says: ==================== mlxsw: More Spectrum-2 preparations This is the second and last set of preparations towards initial Spectrum-2 support in mlxsw. It mainly re-arranges parts of the code that need to work with both ASICs, but somewhat differ. The first three patches allow different ASICs to register different set of operations for KVD linear (KVDL) management. In Spectrum-2 there is no linear memory and instead entries that reside there in Spectrum (e.g., nexthops) are hashed and inserted to the hash-based KVD memory. The fourth patch does a similar restructuring in the low-level multicast router code. This is necessary because multicast routing is implemented using regular circuit TCAM (C-TCAM) in Spectrum, whereas Spectrum-2 uses an algorithmic TCAM (A-TCAM). Next six patches prepare the ACL code for the introduction of A-TCAM in follow-up patch sets. Last two patches allow different ASICs to require different firmware versions and add two resources that need to be queried from firmware by Spectrum-2 specific code. ==================== Signed-off-by: -
Jiri Pirko authored
These resources are needed for Spectrum-2 KVD linear management implementation. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Prepare for Spectrum-2 FW version checking and make mlxsw_sp_fw_rev_validate() per-ASIC as well as required FW revision and FW filename. Signed-off-by:
-
Jiri Pirko authored
For Spectrum-2, we need to insert priority to C-TCAM because HW needs that info in order to correctly process scenarios where rules are in both C-TCAM and A-TCAM. So extend the mlxsw_sp_acl_ctcam_entry_add() args to accept indication if priority needs to be filled up and implement the priority computation and fill-up. Signed-off-by:
-
Jiri Pirko authored
This is going to be needed for Spectrum-2 C-TCAM implementation. Signed-off-by:
-
Jiri Pirko authored
Since Spectrum-2 encodes blocks into different HW layout, push this code into Spectrum-specific op. Signed-off-by:
-
Jiri Pirko authored
Since the flex keys for Spectrum-2 differ not only in blocks definitions but also in encoding layout, prepare for the implementation and pass Spectrum/Spectrum-2 specific ops down to mlxsw_afk_create. Signed-off-by:
-
Jiri Pirko authored
Add ops to be called on driver instance init and fini. This is needed in order to be possible to do Spectrum-2 specific init and fini work. Signed-off-by:
-
Jiri Pirko authored
To allow easy and clean Spectrum-2 implementation for things that differ from Spectrum, split the existing ACL TCAM code 3 ways: 1) common code that calls Spectrum/Spectrum-2 specific ops 2) Spectrum ops implementations 3) common C-TCAM code that is going to be shared between Spectrum and Spectrum-2 implementations Signed-off-by:
-
Jiri Pirko authored
Since Spectrum-2 has different handling of TCAM, push Spectrum MR TCAM bits to a separate file accessible by ops which allows to implement Spectrum-2 specific ops. Signed-off-by:
-
Jiri Pirko authored
For the Spectrum-2 KVD linear manager implementation, entry_count will be needed even for the free function. So pass it down. Signed-off-by:
-
Jiri Pirko authored
Future Spectrum-2 KVD linear manager implementation needs to know type of the entry to alloc and free. So define the types in an enum and pass it down to alloc and free functions. Once the entry type is passed down, KVDL common part knows sizes of each entry types, so replace size function arg with entry count. Signed-off-by:
-
Jiri Pirko authored
In Spectrum-2 there is a different implementation of KVD linear management. Unlike in Spectrum where there is a single index space, in Spectrum-2 the indexes are per-resource. Also there is need to explicitly tell HW that an entry is no longer used. So push out the existing implementation into spectrum1_kvdl.c and prepare ops infrastructure to allow new implementation in a follow-up. Signed-off-by:
-
Kees Cook authored
This restores the use of 2-factor allocation helpers that were already fixed treewide. Please do not use open-coded multiplication; prefer, instead, using 2-factor allocation helpers. Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Julian Wiedmann authored
Since commit 74d4a8f8 ("tcp: remove sk_can_gso() use"), the code doesn't care whether the interface supports SG. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== fix use-after-free bugs in skb list processing A couple of bugs in skb list handling were spotted by Dan Carpenter, with the help of Smatch; following up on them I found a couple more similar cases. This series fixes them by changing the relevant loops to use the dequeue-enqueue model (rather than in-place list modification). v3: fixed another similar bug in __netif_receive_skb_list_core(). v2: dropped patch #3 (new list.h helper), per DaveM's request. ==================== Signed-off-by: -
Edward Cree authored
__netif_receive_skb_core can free the skb, so we have to use the dequeue- enqueue model when calling it from __netif_receive_skb_list_core. Fixes: 88eb1944 ("net: core: propagate SKB lists through packet_type lookup") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
nf_hook() can free the skb, so we need to remove it from the list before calling, and add passed skbs to a sublist afterwards. Fixes: 17266ee9 ("net: ipv4: listified version of ip_rcv") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Edward Cree authored
In netif_receive_skb_list_internal(), all of skb_defer_rx_timestamp(), do_xdp_generic() and enqueue_to_backlog() can lead to kfree(skb). Thus, we cannot wait until after they return to remove the skb from the list; instead, we remove it first and, in the pass case, add it to a sublist afterwards. In the case of enqueue_to_backlog() we have already decided not to pass when we call the function, so we do not need a sublist. Fixes: 7da517a3 ("net: core: Another step of skb receive list processing") Reported-by:
-
- 08 Jul, 2018 20 commits
-
-
Eric Dumazet authored
In both tcp_splice_read() and tcp_recvmsg(), we already test sock_flag(sk, SOCK_DONE) right before evaluating sk->sk_state, so "!sock_flag(sk, SOCK_DONE)" is always true. Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Spectrum-2 small ACL preparations This is the first set of changes towards Spectrum-2 support in the mlxsw driver. It contains small changes that prepare the code for the later introduction of Spectrum-2 support. The Spectrum-2 ASIC uses an algorithmic TCAM (A-TCAM) instead of a circuit TCAM (C-TCAM) as Spectrum, and thus most of the changes are around the ACL code. ==================== Signed-off-by: -
Jiri Pirko authored
The helper should return always KVD linear index of the second set. It is unused now, but going to be used soon. Signed-off-by:
-
Jiri Pirko authored
In Spectrum-2, the real action sets are always in KVD linear. The first set is always empty and contains only pointer to the first real set in KVD linear. So provide possibility to specify the first set is the dummy one. Signed-off-by:
-
Jiri Pirko authored
Spectrum-2 need a slightly different handling of flexible actions. So put an ops pointer in mlxsw_sp struct and rename it. Signed-off-by:
-
Jiri Pirko authored
The SRC_SYS_PORT is passed as 8 bit value down to hw anyway, so cap it in the driver as well. Also, in Spectrum-2 the FW iface for SRC_SYS_PORT is only 8 bits, so prepare for it. Signed-off-by:
-
Jiri Pirko authored
Since in Spectrum-2, MACs are split and IP addresses are split as well, in order to use the same elements for Spectrum and Spectrum-2 split them now. Signed-off-by:
-
Jiri Pirko authored
The lowest 16 bits of tp->prio are always zero, so ignore them with a shift. Signed-off-by:
-
Jiri Pirko authored
Introduce Flex2 key type for PTAR register which is used in Spectrum-2. Also, extend mlxsw_reg_ptar_pack() to set the value according to the caller. Signed-off-by:
-
Jiri Pirko authored
This is specific for Spectrum as Spectrum-2 has completely different key blocks. Signed-off-by:
-
David S. Miller authored
The kbuild test robot reports: >> net/sched/act_api.c:71:15: sparse: incorrect type in initializer (different address spaces) @@ expected struct tc_cookie [noderef] <asn:4>*__ret @@ got [noderef] <asn:4>*__ret @@ net/sched/act_api.c:71:15: expected struct tc_cookie [noderef] <asn:4>*__ret net/sched/act_api.c:71:15: got struct tc_cookie *new_cookie >> net/sched/act_api.c:71:13: sparse: incorrect type in assignment (different address spaces) @@ expected struct tc_cookie *old @@ got struct tc_cookie [noderef] <struct tc_cookie *old @@ net/sched/act_api.c:71:13: expected struct tc_cookie *old net/sched/act_api.c:71:13: got struct tc_cookie [noderef] <asn:4>*[assigned] __ret >> net/sched/act_api.c:132:48: sparse: dereference of noderef expression Handle this in the usual way by force casting away the __rcu annotation when we are using xchg() on it. Fixes: eec94fdb ("net: sched: use rcu for action cookie update") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
David S. Miller authored
Vlad Buslov says: ==================== Modify action API for implementing lockless actions Currently, all netlink protocol handlers for updating rules, actions and qdiscs are protected with single global rtnl lock which removes any possibility for parallelism. This patch set is a first step to remove rtnl lock dependency from TC rules update path. Recently, new rtnl registration flag RTNL_FLAG_DOIT_UNLOCKED was added. Handlers registered with this flag are called without RTNL taken. End goal is to have rule update handlers(RTM_NEWTFILTER, RTM_DELTFILTER, etc.) to be registered with UNLOCKED flag to allow parallel execution. However, there is no intention to completely remove or split rtnl lock itself. This patch set addresses specific problems in action API that prevents it from being executed concurrently. This patch set does not completely unlock rules or actions update path. Additional patch sets are required to refactor individual actions and filters update for parallel execution. As a preparation for executing TC rules update handlers without rtnl lock, action API code was audited to determine areas that assume external synchronization with rtnl lock and must be changed to allow safe concurrent access with following results: 1. Action idr is already protected with spinlock. However, some code paths assume that idr state is not changes between several consecutive tcf_idr_* function calls. 2. tc_action reference and bind counters are implemented as plain integers. They purpose was to allow single actions to be shared between multiple filters, not to provide means for concurrent modification. 3. tc_action 'cookie' pointer field is not protected against modification. 4. Action API functions, that work with set of actions, use intrusive linked list, which cannot be used concurrently without additional synchronization. 5. Action API functions don't take reference to actions while using them, assuming external synchronization with rtnl lock. Following solutions to these problems are implemented: 1. To remove assumption that idr state doesn't change between tcf_idr_* calls, implement new functions that atomically perform several operations on idr without releasing idr spinlock. (function to atomically lookup and delete action by index, function to atomically check if action exists and allocate new one if necessary, etc.) 2. Use atomic operations on counters to make them suitable for concurrent get/put operations. 3. Data that 'cookie' points to is never modified, so it enough to refactor it to rcu pointer to prevent concurrent de-allocation. 4. Action API doesn't actually use any linked list specific operations on actions intrusive linked list, so it can be refactored to array in straightforward manner. 5. Always take reference to action while accessing it in action API. tcf_idr_search function modified to take reference to action before returning it, so there is no way to lookup an action without incrementing its reference counter. All users of this function are modified to release the reference, after they done using action. With all users using reference counting, it is now safe to concurrently delete actions. Additionally, actions init function signature was expanded with 'rtnl_held' argument, that allows actions that have internal dependency on rtnl lock to take/release it when necessary. Since only shared state in action API module are actions themselves and action idr, these changes are sufficient to not to rely on global rtnl lock for protection of internal action API data structures. Changes from V5 to V6: - Rebase on current net-next - When action is deleted, set pointer in actions array to NULL to prevent double freeing. Changes from V4 to V5: - Change action delete API to track actions that were deleted, to prevent releasing them on error. Changes from V3 to V4: - Expand cover letter. - Reduce actions array size in tcf_action_init_1. - Rebase on latest net-next. Changes from V2 to V3: - Re-send with changelog copied to individual patches. Changes from V1 to V2: - Removed redundant actions ops lookup during delete. - Merge action ops delete definition and implementation. - Assume all actions have delete implemented and don't check for it explicitly. - Resplit action lookup/release code to prevent memory leaks in individual patches. - Make __tcf_idr_check function static - Remove unique idr insertion function. Change original idr insert to do the same thing. - Merge changes that take reference to action when performing lookup and changes that account for this additional reference when dumping action to user space into single patch. - Change convoluted commit message. - Rename "unlocked" to "rtnl_held" for clarity. - Remove estimator lock add patch. - Refactor action check-alloc code into standalone function. - Rename tcf_idr_find_delete to tcf_idr_delete_index. - Rearrange variable definitions in tc_action_delete. - Add patch that refactors action API code to use array of pointers to actions instead of intrusive linked list. - Expand cover letter. ==================== Signed-off-by: -
Vlad Buslov authored
Act API used linked list to pass set of actions to functions. It is intrusive data structure that stores list nodes inside action structure itself, which means it is not safe to modify such list concurrently. However, action API doesn't use any linked list specific operations on this set of actions, so it can be safely refactored into plain pointer array. Refactor action API to use array of pointers to tc_actions instead of linked list. Change argument 'actions' type of exported action init, destroy and dump functions. Acked-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Vlad Buslov authored
Implement function that atomically checks if action exists and either takes reference to it, or allocates idr slot for action index to prevent concurrent allocations of actions with same index. Use EBUSY error pointer to indicate that idr slot is reserved. Implement cleanup helper function that removes temporary error pointer from idr. (in case of error between idr allocation and insertion of newly created action to specified index) Refactor all action init functions to insert new action to idr using this API. Reviewed-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Vlad Buslov authored
Change action API to assume that action init function always takes reference to action, even when overwriting existing action. This is necessary because action API continues to use action pointer after init function is done. At this point action becomes accessible for concurrent modifications, so user must always hold reference to it. Implement helper put list function to atomically release list of actions after action API init code is done using them. Reviewed-by:
-
Vlad Buslov authored
Return from action init function with reference to action taken, even when overwriting existing action. Action init API initializes its fourth argument (pointer to pointer to tc action) to either existing action with same index or newly created action. In case of existing index(and bind argument is zero), init function returns without incrementing action reference counter. Caller of action init then proceeds working with action, without actually holding reference to it. This means that action could be deleted concurrently. Change action init behavior to always take reference to action before returning successfully, in order to protect from concurrent deletion. Reviewed-by:
-
Vlad Buslov authored
Implement helper delete function that uses new action ops 'delete', instead of destroying action directly. This is required so act API could delete actions by index, without holding any references to action that is being deleted. Implement function __tcf_action_put() that releases reference to action and frees it, if necessary. Refactor action deletion code to use new put function and not to rely on rtnl lock. Remove rtnl lock assertions that are no longer needed. Reviewed-by:
-
Vlad Buslov authored
Extend action ops with 'delete' function. Each action type to implements its own delete function that doesn't depend on rtnl lock. Implement delete function that is required to delete actions without holding rtnl lock. Use action API function that atomically deletes action only if it is still in action idr. This implementation prevents concurrent threads from deleting same action twice. Reviewed-by:
-
Vlad Buslov authored
Implement new action API function that atomically finds and deletes action from idr by index. Intended to be used by lockless actions that do not rely on rtnl lock. Reviewed-by:
-
Vlad Buslov authored
Without rtnl lock protection it is no longer safe to use pointer to tc action without holding reference to it. (it can be destroyed concurrently) Remove unsafe action idr lookup function. Instead of it, implement safe tcf idr check function that atomically looks up action in idr and increments its reference and bind counters. Implement both action search and check using new safe function Reference taken by idr check is temporal and should not be accounted by userspace clients (both logically and to preserver current API behavior). Subtract temporal reference when dumping action to userspace using existing tca_get_fill function arguments. Reviewed-by:
-
