- 19 Oct, 2021 5 commits
-
-
Jammy Huang authored
To show video real-time information as below: Capture: Signal : Unlock Width : 1920 Height : 1080 FRC : 30 Performance: Frame# : 0 Frame Duration(ms) : Now : 0 Min : 0 Max : 0 FPS : 0 [hverkuil: make aspeed_video_proc_open() static, fixes sparse warning] Signed-off-by:Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Sergey Senozhatsky authored
We need to always link allocated vb2_dc_buf back to vb2_buffer because we dereference vb2 in prepare() and finish() callbacks. Signed-off-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Tested-by:
Chen-Yu Tsai <wenst@chromium.org> Acked-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Vladimir Barinov authored
This adds g/s_parm ioctls for parallel interface. Signed-off-by:
Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Arnd Bergmann authored
I came across a link failure from randconfig builds: x86_64-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_remove': ths8200.c:(.text+0x491): undefined reference to `v4l2_async_unregister_subdev' x86_64-linux-ld: drivers/media/i2c/ths8200.o: in function `ths8200_probe': ths8200.c:(.text+0xe49): undefined reference to `v4l2_async_register_subdev' x86_64-linux-ld: drivers/media/i2c/tw9910.o: in function `tw9910_remove': tw9910.c:(.text+0x467): undefined reference to `v4l2_async_unregister_subdev' x86_64-linux-ld: drivers/media/i2c/tw9910.o: in function `tw9910_probe': tw9910.c:(.text+0x1123): undefined reference to `v4l2_async_register_subdev' These clearly lack a 'select' statement, but I don't know why this started happening only now. I had a bit of a look around to find other configs that have the same problem, but could not come up with a reliable way and found nothing else through experimentation. It is likely that other symbols like these exist that need an extra select. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
Adding kfree(dvb) to vidtv_bridge_remove() will remove the memory too soon: if an application still has an open filehandle to the device when the driver is unloaded, then when that filehandle is closed, a use-after-free access takes place to the freed memory. Move the kfree(dvb) to vidtv_bridge_dev_release() instead. Signed-off-by:
-
- 18 Oct, 2021 1 commit
-
-
Daniel Almeida authored
If v4l2_ctrl_new_custom fails in cedrus_init_ctrls the error path will free ctx->ctrls, which is also freed in cedrus release. Fix this by setting ctx->ctrls to NULL instead of inadvertently removing kfree calls. Signed-off-by:
Daniel Almeida <daniel.almeida@collabora.com> Signed-off-by:
-
- 08 Oct, 2021 34 commits
-
-
Sean Young authored
I have not been able to give dvb the attention it needs, and now I have even less time. Of course I will continue to maintain rc-core (infrared). Unfortunately this means that dvb will have maintainance issues. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Anant Thazhemadam authored
In dibusb_read_eeprom_byte(), if dibusb_i2c_msg() fails, val gets assigned an value that's not properly initialized. Using kzalloc() in place of kmalloc() for the buffer fixes this issue, as the val can now be set to 0 in the event dibusb_i2c_msg() fails. Reported-by: syzbot+e27b4fd589762b0b9329@syzkaller.appspotmail.com Tested-by: syzbot+e27b4fd589762b0b9329@syzkaller.appspotmail.com Signed-off-by:
Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by:
-
Nil Yi authored
After freed the dev->urb_list, we should set it to NULL as well as set counter to zero. Requested-by:
Nil Yi <teroincn@163.com> Signed-off-by:
-
Evgeny Novikov authored
mn88443x_cmn_power_on() did not handle possible errors of clk_prepare_enable() and always finished successfully so that its caller mn88443x_probe() did not care about failed preparing/enabling of clocks as well. Add missed error handling in both mn88443x_cmn_power_on() and mn88443x_probe(). This required to change the return value of the former from "void" to "int". Found by Linux Driver Verification project (linuxtesting.org). Fixes: 0f408ce8 ("media: dvb-frontends: add Socionext MN88443x ISDB-S/T demodulator driver") Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Co-developed-by:
Kirill Shilimanov <kirill.shilimanov@huawei.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the read-only arrays on the stack but instead them static const. Also makes the object code smaller by 154 bytes: Before: text data bss dec hex filename 42949 22424 0 65373 ff5d media/dvb-frontends/mb86a20s.o After: text data bss dec hex filename 42731 22488 0 65219 fec3 media/dvb-frontends/mb86a20s.o (gcc version 11.2.0) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Ricardo Ribalda authored
Use v4l2 control API helpers to support the events. Fixes v4l2-compliance: test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
-
Ricardo Ribalda authored
Use v4l2 control API helpers to support the events. Fixes v4l2-compliance: test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL Signed-off-by:
-
Ricardo Ribalda authored
Use v4l2 control API helpers to support the events. Fixes v4l2-compliance: test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL Signed-off-by:
-
Ricardo Ribalda authored
bus_info field had a different value for the media entity and the video device. Fixes v4l2-compliance: v4l2-compliance.cpp(637): media bus_info 'PCI:0000:00:05.0' differs from V4L2 bus_info 'PCI:viewfinder' Reviewed-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Ricardo Ribalda authored
For a try_fmt call, the node noes not need to be enabled. Fixes v4l2-compliance fail: v4l2-test-formats.cpp(717): Video Output Multiplanar is valid, but no TRY_FMT was implemented test VIDIOC_TRY_FMT: FAIL Signed-off-by:
-
Ricardo Ribalda authored
The initial format did not have a valid size. Fixes v4l2-compliance: fail: v4l2-test-formats.cpp(723): Video Output Multiplanar: TRY_FMT(G_FMT) != G_FMT test VIDIOC_TRY_FMT: FAIL Signed-off-by:
-
Ricardo Ribalda authored
Move the calculation to an inline function, to it can be used by other parts of the driver. Signed-off-by:
-
Ricardo Ribalda authored
If num_planes is different than zero num_planes and sizes must be checked to support the format. Fix the following v4l2-compliance error: Buffer ioctls (Input 0): fail: v4l2-test-buffers.cpp(717): q.create_bufs(node, 1, &fmt) != EINVAL test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL Reviewed-by: -
Niklas Söderlund authored
Add a V4L2 driver for Renesas R-Car Image Signal Processor. The driver supports the R-Car V3U SoC where the ISP IP sits between the R-Car CSI-2 receiver and VIN and filters the CSI-2 data based on VC/DT and directs the video stream to different VIN IPs. Signed-off-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
Rikard Falkeborn authored
The only usage of imgu_subdev_internal_ops is to assign its address to the internal_ops field in the v4l2_subdev struct, which is a pointer to const v4l2_subdev_internal_ops. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by:
-
Sakari Ailus authored
Add MIPI CCS compliant devices, a few Sony IMX, Hynix Hi-846 and Omnivision ov13b10 sensors and the DW9768 lens driver to the list of supported devices. Also drop SMIA since as a standard it is obsolete. Signed-off-by:
-
Martin Kepplinger authored
Add the SK Hynix Hi-846 8M Pixel CMOS image sensor to the i2c-cardlist. Signed-off-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by:
-
Martin Kepplinger authored
The SK Hynix Hi-846 is a 1/4" 8M Pixel CMOS Image Sensor. It supports usual features like I2C control, CSI-2 for frame data, digital/analog gain control or test patterns. This driver supports the 640x480, 1280x720 and 1632x1224 resolution modes. It supports runtime PM in order not to draw any unnecessary power. The part is also called YACG4D0C9SHC and a datasheet can be found at https://product.skhynix.com/products/cis/cis.go The large sets of partly undocumented register values are for example found when searching for the hi846_mipi_raw_Sensor.c Android driver. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Martin Kepplinger authored
Document the bindings used for the SK Hynix Hi-846 CMOS camera driver. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Martin Kepplinger authored
SK Hynix built the already supported hi556 sensor (and probably much more). For more information, see https://www.skhynix.com/Signed-off-by:
-
Fabian Wüthrich authored
The sensor orientation is read from the _PLC ACPI buffer and converted to a v4l2 format. The sensor rotation is read from the SSDB ACPI buffer and converted into degrees. Signed-off-by:
Fabian Wüthrich <me@fabwu.ch> Reviewed-by:
Daniel Scally <djrscally@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Dikshita Agarwal authored
- Get the min buffer count required by FW from source event change and use the same value to decide actual buffer count and for buffer size calculation. - Setup DPB and OPB buffers after session continue incase of reconfig. Signed-off-by:
Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Dikshita Agarwal authored
Consider alignment while calculating NUM_MBS. Co-developed-by:
Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by:
-
Dikshita Agarwal authored
Set work route to FW based on num of vpp pipes. Signed-off-by:
-
Dikshita Agarwal authored
AON register programming is used to set NOC to low power mode during V6 power off sequence. However AON register memory map is not applicable to 1pipe, hence skipping AON register programming. Co-developed-by:
Vikash Garodia <vgarodia@codeaurora.org> Signed-off-by:
-
Dikshita Agarwal authored
V6 HW can have vpp pipes as 1 or 4, add num_vpp_pipes to resource struture to differentiate. Signed-off-by:
-
Dikshita Agarwal authored
Adds a sm7280 compatible binding to the venus core. Co-developed-by:
-
Dikshita Agarwal authored
Enable no tz FW loading and add routine to reset XTSS. Signed-off-by:
-
Dikshita Agarwal authored
Add a schema description for the venus video encoder/decoder on the sc7280. Signed-off-by:
-
Mansur Alisha Shaik authored
In existing video driver implementation vpp frequency calculation in calculate_inst_freq() is always zero because the value of vpp_freq_per_mb is always zero for decoder. Fixed this by correcting the calculating the vpp frequency calculation for decoder. Fixes: 3cfe5815 ("media: venus: Enable low power setting for encoder") Signed-off-by:
-
Mansur Alisha Shaik authored
Video driver maintains an internal context for the output buffer size. During S_fmt() on capture plane, the output buffer size is not updated in driver context. As a result, during buf_prepare(), the size of the vb2_plane and internal size of the buffer, as maintained by the driver, does not match. This leads to buf_prepare() failure. Update the instance context for the output buffer size during s_fmt(). Signed-off-by:
-
Mansur Alisha Shaik authored
In current video driver implementation in calculate_inst_freq() frequency is calculated based on filled_len. The filled_len may vary frame to frame, because of this in load_scale_v4() since frequency is calculated for all instances, driver is throwing false warning like "HW is overloaded". Hence to handle this, changed log level to low log message. Since the actual session rejection is happening in decide_core() based on load. Signed-off-by:
-
Arnd Bergmann authored
gcc notices that the driver mixes 'dma_addr_t' 'u8 *' and 'u32' to store DMA addresses: drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_vb2_prepare': drivers/media/platform/omap/omap_vout.c:979:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] vout->queued_buf_addr[vb->index] = (u8 *)buf_phy_addr; ^ drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_create_video_devices': drivers/media/platform/omap/omap_vout.c:1479:21: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] vout->fbuf.base = (void *)info.paddr; Use dma_addr_t everywhere here to avoid the type conversions and document what the address is used for. Assigning to vout->fbuf.base still requires a cast, since that is part of the driver independent data structure. Signed-off-by:Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by:
-
Kieran Bingham authored
The V3U provides two VSPD instances, with a new update to the version register to detect the new SoC. Add the new version and model detection, and detail the features available in this module. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
