- 07 Oct, 2008 2 commits
-
-
Ali Saidi authored
From: Ali Saidi <saidi@engin.umich.edu> When TCP receive copy offload is enabled it's possible that tcp_rcv_established() will cause two acks to be sent for a single packet. In the case that a tcp_dma_early_copy() is successful, copied_early is set to true which causes tcp_cleanup_rbuf() to be called early which can send an ack. Further along in tcp_rcv_established(), __tcp_ack_snd_check() is called and will schedule a delayed ACK. If no packets are processed before the delayed ack timer expires the packet will be acked twice. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Jesper Dangaard Brouer <hawk@comx.dk> reported a bug when setting a VLAN device down that is in promiscous mode: When the VLAN device is set down, the promiscous count on the real device is decremented by one by vlan_dev_stop(). When removing the promiscous flag from the VLAN device afterwards, the promiscous count on the real device is decremented a second time by the vlan_change_rx_flags() callback. The root cause for this is that the ->change_rx_flags() callback is invoked while the device is down. The synchronization is meant to mirror the behaviour of the ->set_rx_mode callbacks, meaning the ->open function is responsible for doing a full sync on open, the ->close() function is responsible for doing full cleanup on ->stop() and ->change_rx_flags() is meant to do incremental changes while the device is UP. Only invoke ->change_rx_flags() while the device is UP to provide the intended behaviour. Tested-by: Jesper Dangaard Brouer <jdb@comx.dk> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Oct, 2008 3 commits
-
-
Jarek Poplawski authored
While debugging another bug it was found that NetRom socks are sometimes seen unorphaned in sk_free(). This patch moves sock_orphan() in nr_release() to the beginning (like in ax25, or rose). Reported-and-tested-by: Bernard Pidoux f6bvp <f6bvp@free.fr> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Since we reverted 30902dc3 ("ax25: Fix std timer socket destroy handling.") we have to put some kind of fix in to cure the issue whereby unaccepted connections do not get destroyed. The approach used here is from Tihomir Heidelberg - 9a4gl Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 30902dc3. It causes all kinds of problems, based upon a report by Bernard (f6bvp) and analysis by Jarek Poplawski. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Oct, 2008 4 commits
-
-
Timo Teras authored
Fix a xfrm_{state,policy}_walk leak if pfkey socket is closed while dumping is on-going. Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaud Ebalard authored
ip6_dst_blackhole_ops.kmem_cachep is not expected to be NULL (i.e. to be initialized) when dst_alloc() is called from ip6_dst_blackhole(). Otherwise, it results in the following (xfrm_larval_drop is now set to 1 by default): [ 78.697642] Unable to handle kernel paging request for data at address 0x0000004c [ 78.703449] Faulting instruction address: 0xc0097f54 [ 78.786896] Oops: Kernel access of bad area, sig: 11 [#1] [ 78.792791] PowerMac [ 78.798383] Modules linked in: btusb usbhid bluetooth b43 mac80211 cfg80211 ehci_hcd ohci_hcd sungem sungem_phy usbcore ssb [ 78.804263] NIP: c0097f54 LR: c0334a28 CTR: c002d430 [ 78.809997] REGS: eef19ad0 TRAP: 0300 Not tainted (2.6.27-rc5) [ 78.815743] MSR: 00001032 <ME,IR,DR> CR: 22242482 XER: 20000000 [ 78.821550] DAR: 0000004c, DSISR: 40000000 [ 78.827278] TASK = eef0df40[3035] 'mip6d' THREAD: eef18000 [ 78.827408] GPR00: 00001032 eef19b80 eef0df40 00000000 00008020 eef19c30 00000001 00000000 [ 78.833249] GPR08: eee5101c c05a5c10 ef9ad500 00000000 24242422 1005787c 00000000 1004f960 [ 78.839151] GPR16: 00000000 10024e90 10050040 48030018 0fe44150 00000000 00000000 eef19c30 [ 78.845046] GPR24: eef19e44 00000000 eef19bf8 efb37c14 eef19bf8 00008020 00009032 c0596064 [ 78.856671] NIP [c0097f54] kmem_cache_alloc+0x20/0x94 [ 78.862581] LR [c0334a28] dst_alloc+0x40/0xc4 [ 78.868451] Call Trace: [ 78.874252] [eef19b80] [c03c1810] ip6_dst_lookup_tail+0x1c8/0x1dc (unreliable) [ 78.880222] [eef19ba0] [c0334a28] dst_alloc+0x40/0xc4 [ 78.886164] [eef19bb0] [c03cd698] ip6_dst_blackhole+0x28/0x1cc [ 78.892090] [eef19be0] [c03d9be8] rawv6_sendmsg+0x75c/0xc88 [ 78.897999] [eef19cb0] [c038bca4] inet_sendmsg+0x4c/0x78 [ 78.903907] [eef19cd0] [c03207c8] sock_sendmsg+0xac/0xe4 [ 78.909734] [eef19db0] [c03209e4] sys_sendmsg+0x1e4/0x2a0 [ 78.915540] [eef19f00] [c03220a8] sys_socketcall+0xfc/0x210 [ 78.921406] [eef19f40] [c0014b3c] ret_from_syscall+0x0/0x38 [ 78.927295] --- Exception: c01 at 0xfe2d730 [ 78.927297] LR = 0xfe2d71c [ 78.939019] Instruction dump: [ 78.944835] 91640018 9144001c 900a0000 4bffff44 9421ffe0 7c0802a6 bf810010 7c9d2378 [ 78.950694] 90010024 7fc000a6 57c0045e 7c000124 <83e3004c> 8383005c 2f9f0000 419e0050 [ 78.956464] ---[ end trace 05fa1ed7972487a1 ]--- As commented by Benjamin Thery, the bug was introduced by f2fc6a54, while adding network namespaces support to ipv6 routes. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis V. Lunev authored
The following actions are possible: tcp_v6_rcv skb->dev = NULL; tcp_v6_do_rcv tcp_v6_hnd_req tcp_check_req req->rsk_ops->send_ack == tcp_v6_send_ack So, skb->dev can be NULL in tcp_v6_send_ack. We must obtain namespace from dst entry. Thanks to Vitaliy Gusev <vgusev@openvz.org> for initial problem finding in IPv4 code. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vitaliy Gusev authored
Fix NULL dereference in tcp_4_send_ack(). As skb->dev is reset to NULL in tcp_v4_rcv() thus OOPS occurs: BUG: unable to handle kernel NULL pointer dereference at 00000000000004d0 IP: [<ffffffff80498503>] tcp_v4_send_ack+0x203/0x250 Stack: ffff810005dbb000 ffff810015c8acc0 e77b2c6e5f861600 a01610802e90cb6d 0a08010100000000 88afffff88afffff 0000000080762be8 0000000115c872e8 0004122000000000 0000000000000001 ffffffff80762b88 0000000000000020 Call Trace: <IRQ> [<ffffffff80499c33>] tcp_v4_reqsk_send_ack+0x20/0x22 [<ffffffff8049bce5>] tcp_check_req+0x108/0x14c [<ffffffff8047aaf7>] ? rt_intern_hash+0x322/0x33c [<ffffffff80499846>] tcp_v4_do_rcv+0x399/0x4ec [<ffffffff8045ce4b>] ? skb_checksum+0x4f/0x272 [<ffffffff80485b74>] ? __inet_lookup_listener+0x14a/0x15c [<ffffffff8049babc>] tcp_v4_rcv+0x6a1/0x701 [<ffffffff8047e739>] ip_local_deliver_finish+0x157/0x24a [<ffffffff8047ec9a>] ip_local_deliver+0x72/0x7c [<ffffffff8047e5bd>] ip_rcv_finish+0x38d/0x3b2 [<ffffffff803d3548>] ? scsi_io_completion+0x19d/0x39e [<ffffffff8047ebe5>] ip_rcv+0x2a2/0x2e5 [<ffffffff80462faa>] netif_receive_skb+0x293/0x303 [<ffffffff80465a9b>] process_backlog+0x80/0xd0 [<ffffffff802630b4>] ? __rcu_process_callbacks+0x125/0x1b4 [<ffffffff8046560e>] net_rx_action+0xb9/0x17f [<ffffffff80234cc5>] __do_softirq+0xa3/0x164 [<ffffffff8020c52c>] call_softirq+0x1c/0x28 <EOI> [<ffffffff8020de1c>] do_softirq+0x34/0x72 [<ffffffff80234b8e>] local_bh_enable_ip+0x3f/0x50 [<ffffffff804d43ca>] _spin_unlock_bh+0x12/0x14 [<ffffffff804599cd>] release_sock+0xb8/0xc1 [<ffffffff804a6f9a>] inet_stream_connect+0x146/0x25c [<ffffffff80243078>] ? autoremove_wake_function+0x0/0x38 [<ffffffff8045751f>] sys_connect+0x68/0x8e [<ffffffff80291818>] ? fd_install+0x5f/0x68 [<ffffffff80457784>] ? sock_map_fd+0x55/0x62 [<ffffffff8020b39b>] system_call_after_swapgs+0x7b/0x80 Code: 41 10 11 d0 83 d0 00 4d 85 ed 89 45 c0 c7 45 c4 08 00 00 00 74 07 41 8b 45 04 89 45 c8 48 8b 43 20 8b 4d b8 48 8d 55 b0 48 89 de <48> 8b 80 d0 04 00 00 48 8b b8 60 01 00 00 e8 20 ae fe ff 65 48 RIP [<ffffffff80498503>] tcp_v4_send_ack+0x203/0x250 RSP <ffffffff80762b78> CR2: 00000000000004d0 Signed-off-by: Vitaliy Gusev <vgusev@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Sep, 2008 3 commits
-
-
Wei Yongjun authored
Since call to function sctp_sf_abort_violation() need paramter 'arg' with 'struct sctp_chunk' type, it will read the chunk type and chunk length from the chunk_hdr member of chunk. But call to sctp_sf_violation_paramlen() always with 'struct sctp_paramhdr' type's parameter, it will be passed to sctp_sf_abort_violation(). This may cause kernel panic. sctp_sf_violation_paramlen() |-- sctp_sf_abort_violation() |-- sctp_make_abort_violation() This patch fixed this problem. This patch also fix two place which called sctp_sf_violation_paramlen() with wrong paramter type. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiko Carstens authored
fb65a7c0 ("iucv: Fix bad merging.") fixed a merge error, but in a wrong way. We now end up with the bug below. This patch corrects the mismerge like it was intended. BUG: scheduling while atomic: swapper/1/0x00000000 Modules linked in: CPU: 1 Not tainted 2.6.27-rc7-00094-gc0f4d6d4 #9 Process swapper (pid: 1, task: 000000003fe7d988, ksp: 000000003fe838c0) 0000000000000000 000000003fe839b8 0000000000000002 0000000000000000 000000003fe83a58 000000003fe839d0 000000003fe839d0 0000000000390de6 000000000058acd8 00000000000000d0 000000003fe7dcd8 0000000000000000 000000000000000c 000000000000000d 0000000000000000 000000003fe83a28 000000000039c5b8 0000000000015e5e 000000003fe839b8 000000003fe83a00 Call Trace: ([<0000000000015d6a>] show_trace+0xe6/0x134) [<0000000000039656>] __schedule_bug+0xa2/0xa8 [<0000000000391744>] schedule+0x49c/0x910 [<0000000000391f64>] schedule_timeout+0xc4/0x114 [<00000000003910d4>] wait_for_common+0xe8/0x1b4 [<00000000000549ae>] call_usermodehelper_exec+0xa6/0xec [<00000000001af7b8>] kobject_uevent_env+0x418/0x438 [<00000000001d08fc>] bus_add_driver+0x1e4/0x298 [<00000000001d1ee4>] driver_register+0x90/0x18c [<0000000000566848>] netiucv_init+0x168/0x2c8 [<00000000000120be>] do_one_initcall+0x3e/0x17c [<000000000054a31a>] kernel_init+0x1ce/0x248 [<000000000001a97a>] kernel_thread_starter+0x6/0xc [<000000000001a974>] kernel_thread_starter+0x0/0xc iucv: NETIUCV driver initialized initcall netiucv_init+0x0/0x2c8 returned with preemption imbalance Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
We're never supposed to shrink the headroom or tailroom. In fact, shrinking the headroom is a fatal action. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 29 Sep, 2008 18 commits
-
-
Linus Torvalds authored
-
Balbir Singh authored
There's a race between mm->owner assignment and swapoff, more easily seen when task slab poisoning is turned on. The condition occurs when try_to_unuse() runs in parallel with an exiting task. A similar race can occur with callers of get_task_mm(), such as /proc/<pid>/<mmstats> or ptrace or page migration. CPU0 CPU1 try_to_unuse looks at mm = task0->mm increments mm->mm_users task 0 exits mm->owner needs to be updated, but no new owner is found (mm_users > 1, but no other task has task->mm = task0->mm) mm_update_next_owner() leaves mmput(mm) decrements mm->mm_users task0 freed dereferencing mm->owner fails The fix is to notify the subsystem via mm_owner_changed callback(), if no new owner is found, by specifying the new task as NULL. Jiri Slaby: mm->owner was set to NULL prior to calling cgroup_mm_owner_callbacks(), but must be set after that, so as not to pass NULL as old owner causing oops. Daisuke Nishimura: mm_update_next_owner() may set mm->owner to NULL, but mem_cgroup_from_task() and its callers need to take account of this situation to avoid oops. Hugh Dickins: Lockdep warning and hang below exec_mmap() when testing these patches. exit_mm() up_reads mmap_sem before calling mm_update_next_owner(), so exec_mmap() now needs to do the same. And with that repositioning, there's now no point in mm_need_new_owner() allowing for NULL mm. Reported-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: disable apm on the olpc
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: cdrom: update ioctl documentation ide: note that IDE generic may prevent other drivers from attaching ide-tape: fix vendor strings Swarm: Fix crash due to missing initialization
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devices [MIPS] BCM47xx: Fix build error due to missing PCI functions [MIPS] IP27: Switch to dynamic interrupt routing avoding panic on error. [MIPS] au1000: Make sure GPIO value is zero or one
-
git://www.linux-m32r.org/git/takata/linux-2.6_devLinus Torvalds authored
* 'linux-m32r' of git://www.linux-m32r.org/git/takata/linux-2.6_dev: m32r/kernel/: cleanups m32r: export __ndelay m32r: export empty_zero_page m32r: don't offer CONFIG_ISA m32r: remove the unused NOHIGHMEM option
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdbLinus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdboc,tty: Fix tty polling search to use name correctly kgdb, x86_64: fix PS CS SS registers in gdb serial kgdb, x86_64: gdb serial has BX and DX reversed kgdb, x86, arm, mips, powerpc: ignore user space single stepping kgdb: could not write to the last of valid memory with kgdb
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: ASoC: Fix another cs4270 error path ALSA: make the CS4270 driver a new-style I2C driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qlogicpti: fix sg list traversal error in continuation entries [SCSI] Fix hang with split requests [SCSI] qla2xxx: Defer enablement of RISC interrupts until ISP initialization completes.
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: scsi: fix fall out of sg-chaining patch in qlogicpti
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_nv: reinstate nv_hardreset() for non generic controllers
-
zippel@linux-m68k.org authored
Commit f072181e ("kconfig: drop the ""trying to assign nonexistent symbol" warning") simply dropped the warnings, but it does a little more than that, it also marks the current .config as needed saving, so add this back. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
zippel@linux-m68k.org authored
Recent changes to oldconfig have mixed up the silentoldconfig handling, so this fixes that by clearly separating that special mode, e.g. KCONFIG_NOSILENTUPDATE is only relevant here, the .config is written as needed. This will also properly close Bug 11230. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The VFS interface for the 'd_compare()' is a bit special (read: 'odd'), because it really just essentially replaces a memcmp(). The filesystem is supposed to just compare the two names with whatever case-independent or other function. And when I say 'is supposed to', I obviously mean that 'procfs does odd things, and actually looks at the dentry that we don't even pass down, rather than just the name'. Which results in problems, because we actually call d_compare before we have even verified that the dentry is still hashed at all. And that causes a problm since the inode that procfs looks at may have been free'd and the d_inode pointer is NULL. procfs just assumes that all dentries are positive, since procfs itself never generates a negative one. But memory pressure will still result in the dentry getting torn down, and as it is removed by RCU, it still remains visible on some lists - and to d_compare. If the filesystem just did a name comparison, we wouldn't care. And we could just fix procfs to know about negative dentries too. But rather than have the low-level filesystems know about internal VFS details, just move the check for a unhashed dentry up a bit, so that we will only call d_compare on dentries that are still active. The actual oops this caused didn't look like a NULL pointer dereference because procfs did a 'container_of(inode, struct proc_inode, vfs_inode)' to get at its internal proc_inode information from the inode pointer, and accessed a field below the inode. So the oops would look something like BUG: unable to handle kernel paging request at fffffffffffffff0 IP: [<ffffffff802bc6c6>] proc_sys_compare+0x36/0x50 and was seen on both x86-64 (Alexey Dobriyan and Hugh Dickins) and ppc64 (Hugh Dickins). Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jean Delvare authored
Conversion to new-style i2c driver missed the error path of the probe function. Fix it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Timur Tabi <timur@freescale.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Timur Tabi authored
Update the CS4270 ALSA device driver to use the new-style I2C interface. Starting with the 2.6.27 PowerPC kernel, I2C devices that have entries in the device trees can no longer be probed by old-style I2C drivers. The device tree for Freescale MPC8610 HPCD has included an entry for the CS4270 since 2.6.25, but that entry was previously ignored by the PowerPC I2C subsystem. Since that's no longer the case, the best solution is to update the CS4270 driver to a new-style interface, rather than try to revert the behavior of new PowerPC I2C subsystem. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Boaz Harrosh authored
Boaz writes: "I've reviewed all patches since Matthew's, and I find one small problem. In the load_cmd() there is a compound loop where the first 4 sg's are set then the rest are set into a memory structure in group of 7 sg's. Well the second 7-group and on is a bug because sg pointer does not advance. This is a fall out from Jens's patch." The reporter, Meelis Roos <mroos@ut.ee>, verified that this patch does indeed fix his problem with qlogicpti. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Tejun Heo authored
Commit 2fd673ec which tried to remove hardreset for generic accidentally removed it for all flavors as all others were inheriting from nv_generic_ops. This patch reinstates nv_hardreset() and puts it into nv_common_ops which all flavors inherit from. nv_generic_ops now inherits from nv_common_ops and overrides .hardreset to ATA_OP_NULL. While at it, explain why nv_hardreset and ATA_OP_NULL override are necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
- 28 Sep, 2008 1 commit
-
-
Boaz Harrosh authored
The current sg list traversal logic for the continuation entries doesn't advance the list pointer once all seven slots are used, so the next continuation entry (if there is one) wrongly begins again at the start of the sg list. Fix by advancing the sg pointer after the for_each_sg(). Reported-by: Meelis Roos <mroos@ut.ee> Cc: David Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
- 27 Sep, 2008 9 commits
-
-
Márton Németh authored
Correct copy-paste problem: CDROMCLOSETRAY is about closing the tray, not opening it. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Tejun Heo authored
Enabling IDE generic may prevent ATA controllers located on legacy ports from being attached to more proper driver or can prevent other controllers which share the IRQ from working. Note it in the help message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: xerces8 <xerces8@butn.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: stein@hermes.si [bart: s/will grab/may grab/ since Borislav has fixed PCI-case for .28] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Borislav Petkov authored
Remove superfluous two bytes from each string buffer and add proper length format specifiers. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Tested-by: Mark de Wever <koraq@xs4all.nl> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Ralf Baechle authored
If things are just right this will result in the hws[0]->parent being passed to ide_host_add() being non-zero and an ooops a little later. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Aurelien Jarno authored
For SSB_BUSTYPE_SSB type devices, we need to initialize dma_mask using coherent_dma_mask so that calls to dma_set_mask() succeed. It fixes the regression on the b44 driver introduced by commit f225763aSigned-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Aurelien Jarno authored
This patch defines pcibios_map_irq() and pcibios_plat_dev_init() for the BCM47xx platform. It fixes the regression introduced by commit aab547ce. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
pcibios_map_irq is no way of returning an error but on IP27 an interrupt is possibly not routable when running out of resources. So do the interrupt routing at pcibios_enable_device time. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Bruno Randolf authored
David Brownell <david-b@pacbell.net> wrote: > The problem is that "value" is zero-or-nonzero. > This code wrongly assumes it's zero-or-one. > Possible fix: "((!!value) << gpio)". Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Adrian Bunk authored
This patch contains the following cleanups: - make the following needlessly global code static: - entry.S: resume_userspace - process.c: pm_idle - process.c: default_idle() - smp.c: send_IPI_allbutself() - time.c: timer_interrupt() - time.c: struct irq0 - traps.c: set_eit_vector_entries() - traps.c: kstack_depth_to_print - traps.c: show_trace() - traps.c: die_lock - remove the following unused code: - head.S: startup_32 - process.c: hlt_counter - process.c: disable_hlt() - process.c: enable_hlt() - process.c: dump_task_regs() - remove the following variables and their usages since they were always 0: - irq.c: irq_err_count - irq.c: irq_mis_count Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
-