The MCE keyboard sends both key down and key up events. We have a timeout
handler mce_kbd_rx_timeout() in case the keyup event is never received;
however, this may race with new key down events from occurring.

The race is that key down scancode arrives and key down events are
generated. The timeout handler races this and generates key up events
straight afterwards. Since the keyboard generates scancodes every 100ms,
most likely the keys will be repeated 100ms later, and now we have new
key down events and the user sees duplicate key presses.
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There is nothing to sync in this code path.
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The MCE Remote sends a 0 scancode when keys are released. If this is not
received or decoded, then keys can get "stuck"; the keyup event is not
sent since the input_sync() is missing from the timeout handler.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

If two keys are pressed, then both keys are encoded in the scancode. This
makes the mce keyboard more responsive.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The mce keyboard repeats pressed keys every 100ms. If the IR timeout
is set to less than that, we send key up events before the repeat
arrives, so we have key up/key down for each IR repeat.

The keyboard ends any sequence with a 0 scancode, in which case all keys
are cleared so there is no need to run the timeout timer: it only exists
for the case that the final 0 was not received.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Each IR protocol has its own repeat period. We can minimise the keyup
timer to be the protocol period + IR timeout. This makes keys less
"sticky" and makes IR more reactive and nicer to use.

This feature was previously attempted in commit d57ea877 ("media: rc:
per-protocol repeat period"), but that did not take the IR timeout into
account, and had to be reverted.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Since the kernel now modifies the timeout, make it possible to retrieve
the current value.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The longer the IR timeout, the longer the rc device waits until delivering
the trailing space. So, by reducing this timeout, we reduce the delay for
the last scancode to be delivered.

Note that the lirc daemon disables all protocols, in which case we revert
back to the default value.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

On the raspberry pi, we might have two lirc devices; one for sending and
one for receiving. This change makes it much more apparent which one
is which.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

In Video Pixel/Line Pre-Clip Register, the setting value can be
set in 1 line unit, but it can only be specified as a multiple of
4 by v4l_bound_align_image function().
So correct that it can be specified in 1 line unit with this patch.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Setting v with the CEC_PIN_EVENT_FL_DROPPED is incorrect, instead
ev should be set with this bit. Fix this.

Detected by CoverityScan, CID#1467974 ("Extra high-order bits")

Fixes: 6ec1cbf6 ("media: cec: improve CEC pin event handling")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

User reports AverMedia DVD EZMaker 7 can be driven by VIDEO_GRABBER.
Add the device to the id_table to make it work.

BugLink: https://bugs.launchpad.net/bugs/1620762

Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The OMAP3 ISP driver manages its MMU mappings through the IOMMU-aware
ARM DMA backend. The current code creates a dma_iommu_mapping and
attaches this to the ISP device, but never detaches the mapping in
either the probe failure paths or the driver remove path resulting
in an unbalanced mapping refcount and a memory leak. Fix this properly.
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Suman Anna <s-anna@ti.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

This file does a lot of non-trivial struff. Document it using
kernel-doc markups where needed and improve the comments inside
do_video_ioctl().
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Making the cast right for get_user/put_user is not trivial, as
it needs to ensure that the types are the correct ones.

Improve it by using macros.

Tested with vivid with:
	$ sudo modprobe vivid no_error_inj=1
	$ v4l2-compliance-32bits -a -s10 >32bits && v4l2-compliance-64bits -a -s10 > 64bits && diff -U0 32bits 64bits
	--- 32bits	2018-04-17 11:18:29.141240772 -0300
	+++ 64bits	2018-04-17 11:18:40.635282341 -0300
	@@ -1 +1 @@
	-v4l2-compliance SHA   : bc71e4a67c6fbc5940062843bc41e7c8679634ce, 32 bits
	+v4l2-compliance SHA   : bc71e4a67c6fbc5940062843bc41e7c8679634ce, 64 bits

Using the latest version of v4l-utils with this patch applied:
	https://patchwork.linuxtv.org/patch/48746/Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

In the past, "up" were an acronym for "user pointer" and "kp" for
"kernel pointer". However, since commit a1dfb4c4 ("media:
v4l2-compat-ioctl32.c: refactor compat ioctl32 logic"), both
are now __user pointers.

So, the usage of "kp" is really misleading there. So, rename
both to just "p32" and "p64" everywhere it occurs, in order to
make peace with this file's namespace.

There are two exceptions to "up/kp" nomenclature: at
alloc_userspace() and at do_video_ioctl().

There, a new userspace pointer were allocated, in order to store
the 64 bits version of the ioctl. Those were called as "up_native",
with is, IMHO, an even worse name, as "native" could mislead of
being the arguments that were filled from userspace. I almost
renamed it to just "p64", but, after thinking more about that,
it sounded better to call it as "new_p64", as this makes clearer
that this is the data structure that was allocated inside this
file in order to be used to pass/retrieve data when calling the
64-bit ready file->f_op->unlocked_ioctl() function.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Smatch report several issues with bad __user annotations:

  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:447:21: warning: incorrect type in argument 1 (different address spaces)
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:447:21:    expected void [noderef] <asn:1>*uptr
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:447:21:    got void *<noident>
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:621:21: warning: incorrect type in argument 1 (different address spaces)
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:621:21:    expected void const volatile [noderef] <asn:1>*<noident>
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:621:21:    got struct v4l2_plane [noderef] <asn:1>**<noident>
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:693:13: warning: incorrect type in argument 1 (different address spaces)
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:693:13:    expected void [noderef] <asn:1>*uptr
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:693:13:    got void *[assigned] base
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:871:13: warning: incorrect type in assignment (different address spaces)
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:871:13:    expected struct v4l2_ext_control [noderef] <asn:1>*kcontrols
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:871:13:    got struct v4l2_ext_control *<noident>
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:957:13: warning: incorrect type in assignment (different address spaces)
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:957:13:    expected unsigned char [usertype] *__pu_val
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:957:13:    got void [noderef] <asn:1>*
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:973:13: warning: incorrect type in argument 1 (different address spaces)
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:973:13:    expected void [noderef] <asn:1>*uptr
  drivers/media/v4l2-core/v4l2-compat-ioctl32.c:973:13:    got void *[assigned] edid

Fix them.
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of +=, the rule had :=, with actually disables build
of everything else.

Fixes: 58757984 ("media: si470x: allow build both USB and I2C at the same time")
Reported-by: Daniel Scheller <d.scheller.oss@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The check for a valid ptr in ddb_io->dma isn't really necessary since only
devices that do data transport using DMA are supported by the driver, and
all previous initialisation code (through input_init(), output_init() and
dma_init(), has_dma is always true as it's set in ddb_probe() during
driver load) guarantees the ptr is set.

As a side effect, this silences these sparse warnings (albeit them being
false positives as ddb_io->dma won't change in these functions so the
condition always equals to the same result):

    drivers/media/pci/ddbridge/ddbridge-core.c:495:9: warning: context imbalance in 'ddb_output_start' - different lock contexts for basic block
    drivers/media/pci/ddbridge/ddbridge-core.c:510:9: warning: context imbalance in 'ddb_output_stop' - different lock contexts for basic block
    drivers/media/pci/ddbridge/ddbridge-core.c:525:9: warning: context imbalance in 'ddb_input_stop' - different lock contexts for basic block
    drivers/media/pci/ddbridge/ddbridge-core.c:560:9: warning: context imbalance in 'ddb_input_start' - different lock contexts for basic block
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

As warned by smatch:
	drivers/media/pci/mantis/mantis_uart.c:105 mantis_uart_work() warn: this loop depends on readl() succeeding

If something goes wrong at readl(), the logic will stay there
inside an IRQ code forever. This is not the nicest thing to
do :-)

So, add a timeout there, preventing staying inside the IRQ
for more than 10ms.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

As warned by smatch:
	drivers/media/rc/st_rc.c:110 st_rc_rx_interrupt() warn: this loop depends on readl() succeeding

If something goes wrong at readl(), the logic will stay there
inside an IRQ code forever. This is not the nicest thing to
do :-)

So, add a timeout there, preventing staying inside the IRQ
for more than 10ms.
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

On smatch, this warning is trigged:

	drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm_bo.c:324 __bo_take_off_handling() error: we previously assumed 'bo->prev' could be null (see line 314)

Because it can't properly analize the truth table for the above
function. So, add an explicit check for the final condition there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The __user annotations at the compat32 code is not right:

   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:81:18: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:81:18:    expected void *base
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:81:18:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:232:23: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:232:23:    expected unsigned int [usertype] *xcoords_y
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:232:23:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:233:23: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:233:23:    expected unsigned int [usertype] *ycoords_y
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:233:23:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:234:24: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:234:24:    expected unsigned int [usertype] *xcoords_uv
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:234:24:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:235:24: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:235:24:    expected unsigned int [usertype] *ycoords_uv
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:235:24:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:296:29: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:296:29:    expected unsigned int [usertype] *effective_width
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:296:29:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:360:29: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:360:29:    expected unsigned int [usertype] *effective_width
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:360:29:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:437:19: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:437:19:    expected struct v4l2_framebuffer *frame
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:437:19:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:481:29: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:481:29:    expected unsigned short *calb_grp_values
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:481:29:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:701:39: warning: cast removes address space of expression
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:704:21: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:704:21:    expected void const volatile [noderef] <asn:1>*<noident>
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:704:21:    got unsigned int [usertype] *src
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:43: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:43:    expected struct atomisp_shading_table *shading_table
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:43:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:742:44: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:742:44:    expected void [noderef] <asn:1>*to
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:742:44:    got struct atomisp_shading_table *shading_table
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:755:41: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:755:41:    expected struct atomisp_morph_table *morph_table
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:755:41:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:760:44: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:760:44:    expected void [noderef] <asn:1>*to
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:760:44:    got struct atomisp_morph_table *morph_table
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:772:40: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:772:40:    expected struct atomisp_dvs2_coefficients *dvs2_coefs
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:772:40:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:777:44: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:777:44:    expected void [noderef] <asn:1>*to
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:777:44:    got struct atomisp_dvs2_coefficients *dvs2_coefs
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:46: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:46:    expected struct atomisp_dvs_6axis_config *dvs_6axis_config
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:46:    got void [noderef] <asn:1>*
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:793:44: warning: incorrect type in argument 1 (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:793:44:    expected void [noderef] <asn:1>*to
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:793:44:    got struct atomisp_dvs_6axis_config *dvs_6axis_config
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:853:17: warning: incorrect type in assignment (different address spaces)
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:853:17:    expected struct atomisp_sensor_ae_bracketing_lut_entry *lut
   drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:853:17:    got void [noderef] <asn:1>*
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There are two functions used externally:
	drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:866:6: warning: symbol 'atomisp_do_compat_ioctl' was not declared. Should it be static?
	drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:1110:6: warning: symbol 'atomisp_compat_ioctl32' was not declared. Should it be static?

whose include header is missing. Add it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The logic at get_atomisp_parameters32() is broken, as pointed by
smatch:

	drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:737:21: warning: dereference of noderef expression
	drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:744:60: warning: dereference of noderef expression
	drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:763:21: warning: dereference of noderef expression
	drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:770:60: warning: dereference of noderef expression
	drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:788:21: warning: dereference of noderef expression
	drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:795:60: warning: dereference of noderef expression
	drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:812:21: warning: dereference of noderef expression
	drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_ioctl32.c:819:60: warning: dereference of noderef expression

It tries to access userspace data directly, without calling
get_user(). That should generate OOPS. Thankfully, the right
logic is already there (although commented out).
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

As warned by smatch:
	drivers/media/v4l2-core/v4l2-compat-ioctl32.c:879 put_v4l2_ext_controls32() warn: check for integer overflow 'count'

The access_ok() logic should check for too big arrays too.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The omap/omap3 and viu drivers are for 32 bit platforms only.
There, a pointer has 32 bits. Now that those drivers build
for 64 bits with COMPILE_TEST, they produce the following
warnings:

drivers/media/platform/omap/omap_vout_vrfb.c: In function 'omap_vout_allocate_vrfb_buffers':
drivers/media/platform/omap/omap_vout_vrfb.c:57:10: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
   memset((void *) vout->smsshado_virt_addr[i], 0,
          ^
drivers/media/platform/fsl-viu.c: In function 'viu_setup_preview':
drivers/media/platform/fsl-viu.c:753:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
  reg_val.field_base_addr = (u32)dev->ovbuf.base;
                            ^
drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_get_userptr':
drivers/media/platform/omap/omap_vout.c:209:25: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
   *physp = virt_to_phys((void *)virtp);
                         ^
drivers/media/platform/omap3isp/ispccdc.c: In function 'ccdc_config':
drivers/media/platform/omap3isp/ispccdc.c:738:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
         (__force void __user *)fpc.fpcaddr,
         ^

Add some typecasts to remove those warnings when building for
64 bits.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Changeset dc9f65cf ("media: staging: atomisp: avoid a warning if 32
bits build") was meant to solve an impossible condition when building
with 32 bits. It turns that this impossible condition also happens wit
64 bits:
	drivers/staging/media/atomisp/platform/intel-mid/atomisp_gmin_platform.c:698 gmin_get_config_var() warn: impossible condition '(*out_len > (~0)) => (0-u64max > u64max)'

After a further analysis, this condition will always be false as, on
all architectures, size_t doesn't have more bits than unsigned long.

Also, the only two archs that really matter are x86 and x86_64, as this
driver doesn't build on other archs (as it depends on X86-specific UEFI
support).

So, just drop the useless code.

Fixes: dc9f65cf ("media: staging: atomisp: avoid a warning if 32 bits build")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/cec/cec-pin-error-inj.c:231
cec_pin_error_inj_parse_line() error: uninitialized symbol 'pos'.

The tx-add-bytes command didn't check for the presence of an argument, and
also didn't check that it was > 0.

This should fix this error.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The logic at v4l2_fwnode_reference_parse_int_props() is somewhat
complex and violates Linux coding style, as it does multiple
statements on a single line. That makes static analyzers to
be confused, as warned by smatch:

	drivers/media/v4l2-core/v4l2-fwnode.c:832 v4l2_fwnode_reference_parse_int_props() warn: passing zero to 'PTR_ERR'

Simplify the logic, in order to make clearer about what happens
when v4l2_fwnode_reference_get_int_prop() returns an error.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

As warned by smatch:
	drivers/media/dvb-core/dvb_frontend.c:314 dvb_frontend_get_event() warn: inconsistent returns 'sem:&fepriv->sem'.
	  Locked on:   line 288
	               line 295
	               line 306
	               line 314
	  Unlocked on: line 303

The lock implementation for get event is wrong, as, if an
interrupt occurs, down_interruptible() will fail, and the
routine will call up() twice when userspace calls the ioctl
again.

The bad code is there since when Linux migrated to git, in
2005.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

it makes no sense to use strncmp() with a size with is
bigger than the string we're comparing with.

Fix those warnings:

    drivers/staging/media/atomisp/pci/atomisp2/atomisp_fops.c:776 atomisp_open() error: strncmp() '"ATOMISP ISP ACC"' too small (16 vs 32)
    drivers/staging/media/atomisp/pci/atomisp2/atomisp_fops.c:913 atomisp_release() error: strncmp() '"ATOMISP ISP ACC"' too small (16 vs 32)
    drivers/staging/media/atomisp/pci/atomisp2/atomisp_ioctl.c:2751 atomisp_vidioc_default() error: strncmp() '"ATOMISP ISP ACC"' too small (16 vs 32)
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

There are lots of troubles with atomisp __user annotations. Fix them.

drivers/staging/media/atomisp/pci/atomisp2/atomisp_acc.c:357:49: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/media/atomisp/pci/atomisp2/atomisp_acc.c:357:49:    expected void *userptr
drivers/staging/media/atomisp/pci/atomisp2/atomisp_acc.c:357:49:    got void [noderef] <asn:1>*user_ptr
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:3302:43: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:3302:43:    expected void const [noderef] <asn:1>*from
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:3302:43:    got void const *from
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:4070:58: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:4070:58:    expected void const *from
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:4070:58:    got unsigned short [noderef] <asn:1>*<noident>
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:4082:58: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:4082:58:    expected void const *from
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:4082:58:    got unsigned short [noderef] <asn:1>*<noident>
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:6179:62: warning: incorrect type in argument 2 (different address spaces)
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:6179:62:    expected void const [noderef] <asn:1>*from
drivers/staging/media/atomisp/pci/atomisp2/atomisp_cmd.c:6179:62:    got unsigned short [usertype] *<noident>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The mmu_private.h header is included at mmu.c, with duplicates the
already existing definitions at mmu_public.h.

Fix this by removing the erroneous header file.

Solve those issues:

    drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/mmu_private.h:24:26: warning: function 'mmu_reg_store' with external linkage has definition
    drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/mmu_private.h:35:30: warning: function 'mmu_reg_load' with external linkage has definition
    drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/mmu_private.h:24:26: warning: function 'mmu_reg_store' with external linkage has definition
    drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/mmu_private.h:35:30: warning: function 'mmu_reg_load' with external linkage has definition
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

smatch says that there's an issue with number
conversion:

   drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_params.c:4154 sh_css_params_write_to_ddr_internal() warn: '((-(1 << ((14 - 1)))))' 4294959104 can't fit into 32767 'converted_macc_table.data[idx]'
   drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_params.c:4157 sh_css_params_write_to_ddr_internal() warn: '((-(1 << ((14 - 1)))))' 4294959104 can't fit into 32767 'converted_macc_table.data[idx + 1]'
   drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_params.c:4160 sh_css_params_write_to_ddr_internal() warn: '((-(1 << ((14 - 1)))))' 4294959104 can't fit into 32767 'converted_macc_table.data[idx + 2]'
   drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_params.c:4163 sh_css_params_write_to_ddr_internal() warn: '((-(1 << ((14 - 1)))))' 4294959104 can't fit into 32767 'converted_macc_table.data[idx + 3]'
   drivers/staging/media/atomisp/pci/atomisp2/css2400/isp/kernels/eed1_8/ia_css_eed1_8.host.c:168 ia_css_eed1_8_vmem_encode() warn: assigning (-8192) to unsigned variable 'to->e_dew_enh_a[0][base + j]'

That's probably because min() and max() definition used there
are really poor ones. So, replace by the in-kernel macro.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

As warned:
	drivers/media/platform/omap/omap_vout.c:711 omap_vout_buffer_setup() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Those annotations are wrong, causing this warning:

    drivers/media/platform/fsl-viu.c:1440:21: warning: incorrect type in assignment (different address spaces)
    drivers/media/platform/fsl-viu.c:1440:21:    expected struct viu_reg *vr
    drivers/media/platform/fsl-viu.c:1440:21:    got struct viu_reg [noderef] <asn:2>*[assigned] viu_regs
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Solve those warnings:

    drivers/media/platform/fsl-viu.c:299 restart_video_queue() warn: argument 3 to %08lx specifier is cast from pointer
    drivers/media/platform/fsl-viu.c:506 buffer_queue() warn: argument 2 to %08lx specifier is cast from pointer
    drivers/media/platform/fsl-viu.c:518 buffer_queue() warn: argument 2 to %08lx specifier is cast from pointer
    drivers/media/platform/fsl-viu.c:528 buffer_queue() warn: argument 2 to %08lx specifier is cast from pointer
    drivers/media/platform/fsl-viu.c:1219 viu_open() warn: argument 2 to %08lx specifier is cast from pointer
    drivers/media/platform/fsl-viu.c:1219 viu_open() warn: argument 3 to %08lx specifier is cast from pointer
    drivers/media/platform/fsl-viu.c:1219 viu_open() warn: argument 4 to %08lx specifier is cast from pointer
    drivers/media/platform/fsl-viu.c:1329 viu_mmap() warn: argument 2 to %08lx specifier is cast from pointer
    drivers/media/platform/fsl-viu.c:1334 viu_mmap() warn: argument 2 to %08lx specifier is cast from pointer
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The 'from' variable at preview_config() expects an __user * type.

However, the logic there does:

    from = *(void * __user *) ((void *)cfg + attr->config_offset);

With actually means a void pointer, pointing to a void __ user
pointer. When the first pointer is de-referenced with *(foo),
the type it returns is "void *" instead of "void __user *".

Change it to:
    from = *(void __user **) ((void *)cfg + attr->config_offset);

in order to obtain, when de-referenced, a void __user pointer,
as desired.

That prevent those warnings:
   drivers/media/platform/omap3isp/isppreview.c:893:45: warning: incorrect type in initializer (different address spaces)
   drivers/media/platform/omap3isp/isppreview.c:893:45:    expected void [noderef] <asn:1>*from
   drivers/media/platform/omap3isp/isppreview.c:893:45:    got void *[noderef] <asn:1><noident>
   drivers/media/platform/omap3isp/isppreview.c:893:47: warning: dereference of noderef expression
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of converting to int, use %p. That prevents this
warning:
	drivers/media/platform/omap3isp/ispstat.c:451 isp_stat_bufs_alloc() warn: argument 7 to %08lx specifier is cast from pointer
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>