- 08 Jan, 2018 40 commits
-
-
Felix Fietkau authored
Using both chains adds max. 3 dBm. A similar worst-case calculation is being used in ath9k as well to ensure that the hardware stays within regulatory limits Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Felix Fietkau authored
This allows user space to query the real hardware limits directly Signed-off-by:
-
Felix Fietkau authored
Preparation for exposing maximum power to mac80211 Signed-off-by:
-
Felix Fietkau authored
Fixes throughput issues in combination with LDPC Signed-off-by:
-
Felix Fietkau authored
Discard affected packets instead. Should reduce the frequency of bogus bug reports Signed-off-by:
-
Fengguang Wu authored
drivers/net/wireless/mediatek/mt76/mt76x2_main.c:86:5-8: Unneeded variable: "ret". Return "0" on line 112 Remove unneeded variable used to store return value. Generated by: scripts/coccinelle/misc/returnvar.cocci Fixes: a5f6039c8f9c ("mt76: add driver code for MT76x2e") CC: Felix Fietkau <nbd@nbd.name> Signed-off-by:Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Fengguang Wu authored
drivers/net/wireless/mediatek/mt76/debugfs.c:36:0-23: WARNING: fops_regval should be defined with DEFINE_DEBUGFS_ATTRIBUTE Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Fixes: a5f6039c8f9c ("mt76: add driver code for MT76x2e") CC: Felix Fietkau <nbd@nbd.name> Signed-off-by: -
Double Lo authored
This patch will add 43455 into the save-restore(SR) capable chip list, so the SR engine will be enabled with 43455 FW which built-in the -sr function. Signed-off-by:
Double Lo <double.lo@cypress.com> Signed-off-by:
Wright Feng <wright.feng@cypress.com> Signed-off-by:
-
Ian Molton authored
Make it more obvious that this code acually enables interrupts, and provide nice definitions for the bits in the register. Signed-off-by:
Ian Molton <ian@mnementh.co.uk> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Ian Molton authored
In preparation for removing the function array, remove all code that refers to function by index and replace with pointers to the function itself. Signed-off-by:
-
Arend Van Spriel authored
Its more efficient to test the register we're interested in first, potentially avoiding two more comparisons, and therefore always avoiding one comparison per call on all other chips. Signed-off-by:
-
Ian Molton authored
func0 is not provided by the mmc stack as a function when probing. Instead providing specific access functions to read/write it. This prepares for a patch to remove the actual array entry itself. Signed-off-by:
-
Ian Molton authored
Rather than workaround the restrictions on func0 addressing in the driver, set MMC_QUIRK_LENIENT_FN0 Signed-off-by:
-
Ian Molton authored
The IO functions operate within the Chipcommon IO window. Explicitly set this, rather than relying on the last initialisation IO access to leave it set to the right value by chance. Signed-off-by:
-
Arend Van Spriel authored
Avoid confusion with unrelated _buscore labels. Signed-off-by:
-
Ian Molton authored
Remove yet another IO function from the code and replace with one that already exists. Signed-off-by:
-
Ping-Ke Shih authored
This commit fills FW version information of RTL8188EE and RTL8723, so the btcoex can cooperate with FW correctly. Also, we can display this version in debugfs. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
We use seq_file to replace RT_TRACE to dump status, then we can use 'cat' to access btcoex's status through debugfs. (i.e. /sys/kernel/debug/rtlwifi/00-11-22-33-44-55-66/btcoex) Other related changes are 1. implement btc_disp_dbg_msg() to access btcoex's common status. 2. remove obsolete field bt_exist Signed-off-by:
-
Ping-Ke Shih authored
Use debugfs to dump register and btcoex status, and also write registers and h2c. We create topdir in /sys/kernel/debug/rtlwifi/, and use the MAC address as subdirectory with several entries to dump mac_reg, bb_reg, rf_reg etc. An example is /sys/kernel/debug/rtlwifi/00-11-22-33-44-55-66/mac_0 This change permits examination of device registers in a dynamic manner, a feature not available with the current debug mechanism. Signed-off-by: -
Ping-Ke Shih authored
Without firmware, driver wastes time to download and wait for MCU bootup, and then kernel core dump finally. If request_firmware fails, the value max_fw_size=0 is set, so we check the value before downloading firmware. Signed-off-by:
-
Frank A. Cancio Bello authored
This is merged by Ping-Ke Shih from commit a221cb09 ("staging: rtlwifi: Remove unnecessary parentheses"), and original commit log is reserved below. Remove unnecessary parentheses to comply with preferred coding style for the linux kernel and avoid the following checkpatch's message: 'CHECK: Unnecessary parentheses around'. Credits to checkpatch. Signed-off-by:
Frank A. Cancio Bello <frank@generalsoftwareinc.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Gustavo A. R. Silva authored
This is merged by Ping-Ke Shih from commit 640019bb ("staging: rtlwifi: mark expected switch fall-through in rtl_make_smps_action"), and original commit log is reserved below. In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Shreeya Patel authored
This is merged by Ping-Ke Shih from commit 596e0559 ("Staging: rtlwifi: Remove unnecessary 'out of memory' message."), and commit log is reserved below. Logging messages that show some type of "out of memory" error are generally unnecessary as there is a generic message and a stack dump done by the memory subsystem. These messages generally increase kernel size without much added value. Problem found by checkpatch. Signed-off-by:
Shreeya Patel <shreeya.patel23498@gmail.com> Signed-off-by:
-
Tobin C. Harding authored
This is merged by Ping-Ke Shih from commit 85d309d5 ("staging: rtlwifi: use kcalloc instead of multiply"), and original commit log is reserved below. checkpatch emits multiple warnings of type WARNING:ALLOC_WITH_MULTIPLY: Prefer kcalloc over kzalloc with multiply Replace two calls to kzalloc() with calls to kcalloc(). Signed-off-by:
-
Ping-Ke Shih authored
This is merged by Ping-Ke Shih from commit 688a0206 ("staging: rtlwifi: fix parenthesis alignment"), and original commit log is reserved below. Checkpatch emits multiple warnings of type CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis Fix parenthesis alignment in line with checkpatch suggestion. Signed-off-by:
-
Dan Carpenter authored
This is merged by Ping-Ke Shih from commit dc33bd43 ("staging: rtlwifi: check for array overflow"), and the original commit log is reserved below. Smatch is distrustful of the "capab" value and marks it as user controlled. I think it actually comes from the firmware? Anyway, I looked at other drivers and they added a bounds check and it seems like a harmless thing to have so I have added it here as well. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
This section is also modified to include the entire rtlwifi family, not just RTL8192CE. Signed-off-by:
-
Markus Elfring authored
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== ipv6: Align nexthop behaviour with IPv4 This set tries to eliminate some differences between IPv4's and IPv6's treatment of nexthops. These differences are most likely a side effect of IPv6's data structures (specifically 'rt6_info') that incorporate both the route and the nexthop and the late addition of ECMP support in commit 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)"). IPv4 and IPv6 do not react the same to certain netdev events. For example, upon carrier change affected IPv4 nexthops are marked using the RTNH_F_LINKDOWN flag and the nexthop group is rebalanced accordingly. IPv6 on the other hand, does nothing which forces us to perform a carrier check during route lookup and dump. This makes it difficult to introduce features such as non-equal-cost multipath that are built on top of this set [1]. In addition, when a netdev is put administratively down IPv4 nexthops are marked using the RTNH_F_DEAD flag, whereas IPv6 simply flushes all the routes using these nexthops. To be consistent with IPv4, multipath routes should only be flushed when all nexthops in the group are considered dead. The first 12 patches introduce non-functional changes that store the RTNH_F_DEAD and RTNH_F_LINKDOWN flags in IPv6 routes based on netdev events, in a similar fashion to IPv4. This allows us to remove the carrier check performed during route lookup and dump. The next three patches make sure we only flush a multipath route when all of its nexthops are dead. Last three patches add test cases for IPv4/IPv6 FIB. These verify that both address families react similarly to netdev events. Finally, this series also serves as a good first step towards David Ahern's goal of treating nexthops as standalone objects [2], as it makes the code more in line with IPv4 where the nexthop and the nexthop group are separate objects from the route itself. 1. https://github.com/idosch/linux/tree/ipv6-nexthops 2. http://vger.kernel.org/netconf2017_files/nexthop-objects.pdf Changes since RFC (feedback from David Ahern): * Remove redundant declaration of rt6_ifdown() in patch 4 and adjust comment referencing it accordingly * Drop patch to flush multipath routes upon NETDEV_UNREGISTER. Reword cover letter accordingly * Use a temporary variable to make code more readable in patch 15 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Check that IPv4 and IPv6 react the same when the carrier of a netdev is toggled. Local routes should not be affected by this, whereas unicast routes should. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Ido Schimmel authored
Check that IPv4 and IPv6 react the same when a netdev is being put administratively down. Signed-off-by:
-
Ido Schimmel authored
Add test cases to check that IPv4 and IPv6 react to a netdev being unregistered as expected. Signed-off-by:
-
Ido Schimmel authored
By default, IPv6 deletes nexthops from a multipath route when the nexthop device is put administratively down. This differs from IPv4 where the nexthops are kept, but marked with the RTNH_F_DEAD flag. A multipath route is flushed when all of its nexthops become dead. Align IPv6 with IPv4 and have it conform to the same guidelines. In case the multipath route needs to be flushed, its siblings are flushed one by one. Otherwise, the nexthops are marked with the appropriate flags and the tree walker is instructed to skip all the siblings. As explained in previous patches, care is taken to update the sernum of the affected tree nodes, so as to prevent the use of wrong dst entries. Signed-off-by:
-
Ido Schimmel authored
The next patch is going to allow dead routes to remain in the FIB tree in certain situations. When this happens we need to be sure to bump the sernum of the nodes where these are stored so that potential copies cached in sockets are invalidated. The function that performs this update assumes the table lock is not taken when it is invoked, but that will not be the case when it is invoked by the tree walker. Have the function assume the lock is taken and make the single caller take the lock itself. Signed-off-by:
-
Ido Schimmel authored
We are going to allow dead routes to stay in the FIB tree (e.g., when they are part of a multipath route, directly connected route with no carrier) and revive them when their nexthop device gains carrier or when it is put administratively up. This is equivalent to the addition of the route to the FIB tree and we should therefore take care of updating the sernum of all the parent nodes of the node where the route is stored. Otherwise, we risk sockets caching and using sub-optimal dst entries. Export the function that performs the above, so that it could be invoked from fib6_ifup() later on. Signed-off-by:
-
Ido Schimmel authored
As explained in previous patch, fib6_ifdown() needs to consider the state of all the sibling routes when a multipath route is traversed. This is done by evaluating all the siblings when the first sibling in a multipath route is traversed. If the multipath route does not need to be flushed (e.g., not all siblings are dead), then we should just skip the multipath route as our work is done. Have the tree walker jump to the last sibling when it is determined that the multipath route needs to be skipped. Signed-off-by:
-
Ido Schimmel authored
When routes that are a part of a multipath route are evaluated by fib6_ifdown() in response to NETDEV_DOWN and NETDEV_UNREGISTER events the state of their sibling routes is not considered. This will change in subsequent patches in order to align IPv6 with IPv4's behavior. For example, when the last sibling in a multipath route becomes dead, the entire multipath route needs to be removed. To prevent the tree walker from re-evaluating all the sibling routes each time, we can simply evaluate them once - when the first sibling is traversed. If we determine the entire multipath route needs to be removed, then the 'should_flush' bit is set in all the siblings, which will cause the walker to flush them when it traverses them. Signed-off-by:
-
Ido Schimmel authored
Up until now the RTNH_F_DEAD flag was only reported in route dump when the 'ignore_routes_with_linkdown' sysctl was set. This is expected as dead routes were flushed otherwise. The reliance on this sysctl is going to be removed, so we need to report the flag regardless of the sysctl's value. Signed-off-by:
-
Ido Schimmel authored
Currently, dead routes are only present in the routing tables in case the 'ignore_routes_with_linkdown' sysctl is set. Otherwise, they are flushed. Subsequent patches are going to remove the reliance on this sysctl and make IPv6 more consistent with IPv4. Before this is done, we need to make sure dead routes are skipped during route lookup, so as to not cause packet loss. Signed-off-by:
-
Ido Schimmel authored
Similar to previous patch, there is no need to check for the carrier of the nexthop device when dumping the route and we can instead check for the presence of the RTNH_F_LINKDOWN flag. Signed-off-by:
-
