- 11 Feb, 2021 2 commits
-
-
Leo Yan authored
In theory, the options should be arbitrary values and are neutral for any ETM version; so far perf tool uses ETMv3.5/PTM ETMCR config bits except for register's bit definitions, also uses as options. This can introduce confusion, especially if we want to add a new option but the new option is not supported by ETMv3.5/PTM ETMCR. But on the other hand, we cannot change options since these options are generic CoreSight PMU ABI. For easier maintenance and avoid confusion, this patch refines the comment to clarify perf options, and gives out the background info for these bits are coming from ETMv3.5/PTM. Afterwards, we should take these options as general knobs, and if there have any confliction with ETMv3.5/PTM, should consider to define saperate macros for ETMv3.5/PTM ETMCR config bits. Suggested-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20210206150833.42120-2-leo.yan@linaro.org Link: https://lore.kernel.org/r/20210211172038.2483517-2-mathieu.poirier@linaro.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Randy Dunlap authored
Mark the acrn-dev mailing list as subscribers-only. Evidence from a previous patch: acrn-dev@lists.projectacrn.org SMTP error from remote mail server after end of data: 510 5.1.1 Your email address, rdunlap@infradead.org, is not subscribed to that group. Cc: Shuo Liu <shuo.a.liu@intel.com> Cc: acrn-dev@lists.projectacrn.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210210183433.18746-1-rdunlap@infradead.orgSigned-off-by:
-
- 10 Feb, 2021 3 commits
-
-
Alexandru Ardelean authored
This email will become inactive in a few weeks. This change removes it from the MAINTAINERS file and adds the people that will be responsible for the parts moving forward. Acked-by:
Michael Hennerich <michael.hennerich@analog.com> Acked-by:
Nuno Sa <nuno.sa@analog.com> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210210110116.49955-1-alexandru.ardelean@analog.comSigned-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'phy-fixes2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy: second round of phy fixes for v5.11 - rockchip: init return and vednor prefix to dt-property - cpcap: bool conversion fix - lantiq: clock enable fix - lgm: kconfig depends on x86 - mediatek: add mising MODULE_DEVICE_TABLE() * tag 'phy-fixes2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: mediatek: Add missing MODULE_DEVICE_TABLE() phy: phy-brcm-sata: remove unneeded semicolon phy: USB_LGM_PHY should depend on X86 phy: lantiq: rcu-usb2: wait after clock enable phy: rockchip: emmc, add vendor prefix to dts properties devicetree: phy: rockchip-emmc optional add vendor prefix phy: cpcap-usb: remove unneeded conversion to bool phy: rockchip-emmc: emmc_phy_init() always return 0
-
Loic Poulain authored
mhi_deinit_chan_ctxt functionthat takes care of unitializing channel resources, including unmapping coherent MHI areas, can be called from different path in case of controller unregistering/removal: - From a client driver remove callback, via mhi_unprepare_channel - From mhi_driver_remove that unitialize all channels mhi_driver_remove() |-> driver->remove() | |-> mhi_unprepare_channel() | |-> mhi_deinit_chan_ctxt() |... |-> mhi_deinit_chan_ctxt() This leads to double dma freeing... Fix that by preventing deinit for already uninitialized channel. Link: https://lore.kernel.org/r/1612894264-15956-1-git-send-email-loic.poulain@linaro.org Fixes: a7f422f2 ("bus: mhi: Fix channel close issue on driver remove") Reported-by:
Kalle Valo <kvalo@codeaurora.org> Tested-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
- 09 Feb, 2021 35 commits
-
-
Geert Uytterhoeven authored
The device_attribute .show() and .store() methods gained an extra parameter in v2.6.13, but the example in the documentation for the 7-segment header file was never updated. Add the missing parameters. While at it, get rid of the (misspelled) deprecated symbolic permissions, and switch to DEVICE_ATTR_RW(), which was introduced in v3.11 Fixes: 54b6f35c ("[PATCH] Driver core: change device_attribute callbacks") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20210207130543.2128980-1-geert@linux-m68k.orgSigned-off-by:
-
Jie Li authored
Some devices use 255 as default value of Interrupt Line register, and this maybe causes pdev->irq is set as IRQ_NOTCONNECTED in some scenarios. For example, NVMe controller connects to Intel Volume Management Device (VMD). In this situation, IRQ_NOTCONNECTED means INTx line is not connected, not fault. If bind uio_pci_generic to these devices, uio frame will return -ENOTCONN through request_irq. This patch allows binding uio_pci_generic to device with dev->irq of IRQ_NOTCONNECTED. Acked-by:
Kyungsan Kim <ks0204.kim@samsung.com> Signed-off-by:
Jie Li <jie6.li@samsung.com> Link: https://lore.kernel.org/r/1612153559-17028-1-git-send-email-jie6.li@samsung.comSigned-off-by:
-
Sabyrzhan Tasbolatov authored
syzbot found WARNING in qp_broker_alloc[1] in qp_host_alloc_queue() when num_pages is 0x100001, giving queue_size + queue_page_size bigger than KMALLOC_MAX_SIZE for kzalloc(), resulting order >= MAX_ORDER condition. queue_size + queue_page_size=0x8000d8, where KMALLOC_MAX_SIZE=0x400000. [1] Call Trace: alloc_pages include/linux/gfp.h:547 [inline] kmalloc_order+0x40/0x130 mm/slab_common.c:837 kmalloc_order_trace+0x15/0x70 mm/slab_common.c:853 kmalloc_large include/linux/slab.h:481 [inline] __kmalloc+0x257/0x330 mm/slub.c:3959 kmalloc include/linux/slab.h:557 [inline] kzalloc include/linux/slab.h:682 [inline] qp_host_alloc_queue drivers/misc/vmw_vmci/vmci_queue_pair.c:540 [inline] qp_broker_create drivers/misc/vmw_vmci/vmci_queue_pair.c:1351 [inline] qp_broker_alloc+0x936/0x2740 drivers/misc/vmw_vmci/vmci_queue_pair.c:1739 Reported-by: syzbot+15ec7391f3d6a1a7cc7d@syzkaller.appspotmail.com Signed-off-by:
Sabyrzhan Tasbolatov <snovitoll@gmail.com> Link: https://lore.kernel.org/r/20210209102612.2112247-1-snovitoll@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Uwe Kleine-König authored
struct fw_driver::remove returns void, still the comma expression's value is zero. This is harder to parse than necessary, so replace the single expression by two easier ones. Signed-off-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210126221444.713837-1-uwe@kleine-koenig.orgSigned-off-by:
-
Uwe Kleine-König authored
The driver core ignores the return value of struct bus_type::remove() because there is only little that can be done. To simplify the quest to make this function return void, let struct vme_driver::remove return void, too. There is only a single vme driver and it already returns 0 unconditionally in .remove(). Also fix the bus remove function to always return 0. Signed-off-by:
-
Uwe Kleine-König authored
All coreboot drivers return 0 unconditionally in their remove callback. Also the device core ignores the return value of the struct bus_type::remove(), so make the coreboot remove callback return void instead of giving driver authors the illusion they could return an error code here. All drivers are adapted accordingly. Signed-off-by:
-
Michal Simek authored
Based on discussion at https://lore.kernel.org/r/20200318125003.GA2727094@kroah.com we got recommendation to use explicit values for all enum values. The patch is following this recommendation. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/daeb67ded45d8a8f6a96717d1fb9c84439dd2ae8.1612361627.git.michal.simek@xilinx.comSigned-off-by:
-
Shuo Liu authored
Launch a simple guest (with several instructions as payload) on ACRN with demonstration ioctl usage. Signed-off-by:
Shuo Liu <shuo.a.liu@intel.com> Link: https://lore.kernel.org/r/20210207031040.49576-19-shuo.a.liu@intel.comSigned-off-by:
-
Shuo Liu authored
ACRN supports partition mode to achieve real-time requirements. In partition mode, a CPU core can be dedicated to a vCPU of User VM. The local APIC of the dedicated CPU core can be passthrough to the User VM. The Service VM controls the assignment of the CPU cores. Introduce an interface for the Service VM to remove the control of CPU core from hypervisor perspective so that the CPU core can be a dedicated CPU core of User VM. Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Zhi Wang <zhi.a.wang@intel.com> Reviewed-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Shuo Liu authored
irqfd is a mechanism to inject a specific interrupt to a User VM using a decoupled eventfd mechanism. Vhost is a kernel-level virtio server which uses eventfd for interrupt injection. To support vhost on ACRN, irqfd is introduced in HSM. HSM provides ioctls to associate a virtual Message Signaled Interrupt (MSI) with an eventfd. The corresponding virtual MSI will be injected into a User VM once the eventfd got signal. Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Shuo Liu authored
ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd signal when written to by a User VM. ACRN userspace can register any arbitrary I/O address with a corresponding eventfd and then pass the eventfd to a specific end-point of interest for handling. Vhost is a kernel-level virtio server which uses eventfd for signalling. To support vhost on ACRN, ioeventfd is introduced in HSM. A new I/O client dedicated to ioeventfd is associated with a User VM during VM creation. HSM provides ioctls to associate an I/O region with a eventfd. The I/O client signals a eventfd once its corresponding I/O region is matched with an I/O request. Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Shuo Liu authored
An I/O request of a User VM, which is constructed by hypervisor, is distributed by the ACRN Hypervisor Service Module to an I/O client corresponding to the address range of the I/O request. I/O client maintains a list of address ranges. Introduce acrn_ioreq_range_{add,del}() to manage these address ranges. Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: -
Shuo Liu authored
The C-states and P-states data are used to support CPU power management. The hypervisor controls C-states and P-states for a User VM. ACRN userspace need to query the data from the hypervisor to build ACPI tables for a User VM. HSM provides ioctls for ACRN userspace to query C-states and P-states data obtained from the hypervisor. Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Shuo Liu authored
ACRN userspace need to inject virtual interrupts into a User VM in devices emulation. HSM needs provide interfaces to do so. Introduce following interrupt injection interfaces: ioctl ACRN_IOCTL_SET_IRQLINE: Pass data from userspace to the hypervisor, and inform the hypervisor to inject a virtual IOAPIC GSI interrupt to a User VM. ioctl ACRN_IOCTL_INJECT_MSI: Pass data struct acrn_msi_entry from userspace to the hypervisor, and inform the hypervisor to inject a virtual MSI to a User VM. ioctl ACRN_IOCTL_VM_INTR_MONITOR: Set a 4-Kbyte aligned shared page for statistics information of interrupts of a User VM. Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Shuo Liu authored
PCI device passthrough enables an OS in a virtual machine to directly access a PCI device in the host. It promises almost the native performance, which is required in performance-critical scenarios of ACRN. HSM provides the following ioctls: - Assign - ACRN_IOCTL_ASSIGN_PCIDEV Pass data struct acrn_pcidev from userspace to the hypervisor, and inform the hypervisor to assign a PCI device to a User VM. - De-assign - ACRN_IOCTL_DEASSIGN_PCIDEV Pass data struct acrn_pcidev from userspace to the hypervisor, and inform the hypervisor to de-assign a PCI device from a User VM. - Set a interrupt of a passthrough device - ACRN_IOCTL_SET_PTDEV_INTR Pass data struct acrn_ptdev_irq from userspace to the hypervisor, and inform the hypervisor to map a INTx interrupt of passthrough device of User VM. - Reset passthrough device interrupt - ACRN_IOCTL_RESET_PTDEV_INTR Pass data struct acrn_ptdev_irq from userspace to the hypervisor, and inform the hypervisor to unmap a INTx interrupt of passthrough device of User VM. Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Shuo Liu authored
A User VM can access its virtual PCI configuration spaces via port IO approach, which has two following steps: 1) writes address into port 0xCF8 2) put/get data in/from port 0xCFC To distribute a complete PCI configuration space access one time, HSM need to combine such two accesses together. Combine two paired PIO I/O requests into one PCI I/O request and continue the I/O request distribution. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Shuo Liu authored
An I/O request of a User VM, which is constructed by the hypervisor, is distributed by the ACRN Hypervisor Service Module to an I/O client corresponding to the address range of the I/O request. For each User VM, there is a shared 4-KByte memory region used for I/O requests communication between the hypervisor and Service VM. An I/O request is a 256-byte structure buffer, which is 'struct acrn_io_request', that is filled by an I/O handler of the hypervisor when a trapped I/O access happens in a User VM. ACRN userspace in the Service VM first allocates a 4-KByte page and passes the GPA (Guest Physical Address) of the buffer to the hypervisor. The buffer is used as an array of 16 I/O request slots with each I/O request slot being 256 bytes. This array is indexed by vCPU ID. An I/O client, which is 'struct acrn_ioreq_client', is responsible for handling User VM I/O requests whose accessed GPA falls in a certain range. Multiple I/O clients can be associated with each User VM. There is a special client associated with each User VM, called the default client, that handles all I/O requests that do not fit into the range of any other I/O clients. The ACRN userspace acts as the default client for each User VM. The state transitions of a ACRN I/O request are as follows. FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> ... FREE: this I/O request slot is empty PENDING: a valid I/O request is pending in this slot PROCESSING: the I/O request is being processed COMPLETE: the I/O request has been processed An I/O request in COMPLETE or FREE state is owned by the hypervisor. HSM and ACRN userspace are in charge of processing the others. The processing flow of I/O requests are listed as following: a) The I/O handler of the hypervisor will fill an I/O request with PENDING state when a trapped I/O access happens in a User VM. b) The hypervisor makes an upcall, which is a notification interrupt, to the Service VM. c) The upcall handler schedules a worker to dispatch I/O requests. d) The worker looks for the PENDING I/O requests, assigns them to different registered clients based on the address of the I/O accesses, updates their state to PROCESSING, and notifies the corresponding client to handle. e) The notified client handles the assigned I/O requests. f) The HSM updates I/O requests states to COMPLETE and notifies the hypervisor of the completion via hypercalls. Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Shuo Liu authored
The HSM provides hypervisor services to the ACRN userspace. While launching a User VM, ACRN userspace needs to allocate memory and request the ACRN Hypervisor to set up the EPT mapping for the VM. A mapping cache is introduced for accelerating the translation between the Service VM kernel virtual address and User VM physical address. >From the perspective of the hypervisor, the types of GPA of User VM can be listed as following: 1) RAM region, which is used by User VM as system ram. 2) MMIO region, which is recognized by User VM as MMIO. MMIO region is used to be utilized for devices emulation. Generally, User VM RAM regions mapping is set up before VM started and is released in the User VM destruction. MMIO regions mapping may be set and unset dynamically during User VM running. To achieve this, ioctls ACRN_IOCTL_SET_MEMSEG and ACRN_IOCTL_UNSET_MEMSEG are introduced in HSM. Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: -
Shuo Liu authored
A virtual CPU of User VM has different context due to the different registers state. ACRN userspace needs to set the virtual CPU registers state (e.g. giving a initial registers state to a virtual BSP of a User VM). HSM provides an ioctl ACRN_IOCTL_SET_VCPU_REGS to do the virtual CPU registers state setting. The ioctl passes the registers state from ACRN userspace to the hypervisor directly. Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Shuo Liu authored
The VM management interfaces expose several VM operations to ACRN userspace via ioctls. For example, creating VM, starting VM, destroying VM and so on. The ACRN Hypervisor needs to exchange data with the ACRN userspace during the VM operations. HSM provides VM operation ioctls to the ACRN userspace and communicates with the ACRN Hypervisor for VM operations via hypercalls. HSM maintains a list of User VM. Each User VM will be bound to an existing file descriptor of /dev/acrn_hsm. The User VM will be destroyed when the file descriptor is closed. Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Shuo Liu authored
ACRN Hypervisor Service Module (HSM) is a kernel module in Service VM which communicates with ACRN userspace through ioctls and talks to ACRN Hypervisor through hypercalls. Add a basic HSM driver which allows Service VM userspace to communicate with ACRN. The following patches will add more ioctls, guest VM memory mapping caching, I/O request processing, ioeventfd and irqfd into this module. HSM exports a char device interface (/dev/acrn_hsm) to userspace. Cc: Dave Hansen <dave.hansen@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Shuo Liu authored
The Service VM communicates with the hypervisor via conventional hypercalls. VMCALL instruction is used to make the hypercalls. ACRN hypercall ABI: * Hypercall number is in R8 register. * Up to 2 parameters are in RDI and RSI registers. * Return value is in RAX register. Introduce the ACRN hypercall interfaces. Because GCC doesn't support R8 register as direct register constraints, use supported constraint as input with a explicit MOV to R8 in beginning of asm. Cc: Dave Hansen <dave.hansen@intel.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Fengwei Yin <fengwei.yin@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Segher Boessenkool <segher@kernel.crashing.org> Originally-by:
Yakui Zhao <yakui.zhao@intel.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Acked-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Yin Fengwei authored
ACRN Hypervisor reports hypervisor features via CPUID leaf 0x40000001 which is similar to KVM. A VM can check if it's the privileged VM using the feature bits. The Service VM is the only privileged VM by design. Cc: Dave Hansen <dave.hansen@intel.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Fengwei Yin <fengwei.yin@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Yin Fengwei <fengwei.yin@intel.com> Signed-off-by:
-
Shuo Liu authored
The ACRN Hypervisor builds an I/O request when a trapped I/O access happens in User VM. Then, ACRN Hypervisor issues an upcall by sending a notification interrupt to the Service VM. HSM in the Service VM needs to hook the notification interrupt to handle I/O requests. Notification interrupts from ACRN Hypervisor are already supported and a, currently uninitialized, callback called. Export two APIs for HSM to setup/remove its callback. Cc: Dave Hansen <dave.hansen@intel.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Fengwei Yin <fengwei.yin@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Originally-by:
-
Shuo Liu authored
Add documentation on the following aspects of ACRN: 1) A brief introduction on the architecture of ACRN. 2) I/O request handling in ACRN. 3) CPUID functions of ACRN. To learn more about ACRN, please go to ACRN project website https://projectacrn.org, or the documentation page https://projectacrn.github.io/. Cc: Dave Hansen <dave.hansen@intel.com> Cc: Sen Christopherson <sean.j.christopherson@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Fengwei Yin <fengwei.yin@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Yu Wang <yu1.wang@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
Jonathan Marek authored
dma_map_sgtable() returns 0 on success, which is the opposite of what this code was doing. Fixes: 7cd7edb8 ("misc: fastrpc: fix common struct sg_table related issues") Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20210208200401.31100-1-jonathan@marek.caSigned-off-by:
-
Ioana Ciornei authored
Add some new MC firmware commands that can be received through the userspace ioctl interface - *get_max_frame_length and *_get_counter. Acked-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20210208170949.3070898-4-ciorneiioana@gmail.comSigned-off-by:
-
Ioana Ciornei authored
A new object type was recently added in MC. This has to be added in the fsl-mc bus device type list so that it can be properly listed. Acked-by:
-
Dan Carpenter authored
The "desc" pointer can't possibly be NULL here. If we can't find the correct "desc" then tt points to the last element of the fsl_mc_accepted_cmds[] array. Fix this by testing if "i == FSL_MC_NUM_ACCEPTED_CMDS" instead. Fixes: 2cf1e703 ("bus: fsl-mc: add fsl-mc userspace support") Acked-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210208170949.3070898-2-ciorneiioana@gmail.comSigned-off-by:
-
Uwe Kleine-König authored
A driver that only consumes devm-managed resources might well have no remove callback. Additionally given that the device core ignores the return value of ipack_bus_remove() stop returning an error code. Signed-off-by:
Samuel Iglesias Gonsalvez <siglesias@igalia.com> Link: https://lore.kernel.org/r/20210207215556.96371-2-uwe@kleine-koenig.orgSigned-off-by:
-
Uwe Kleine-König authored
A driver without a probe function isn't useful as it can never be used. Let registering such a driver fail already instead of failing every binding. This is only cosmetic as there is no ipack driver without a probe function. Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'misc-habanalabs-next-2021-02-08' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next Oded writes: This tag contains the following changes for 5.12-rc1: - Improve communication protocol with device CPU CP application. The change prevents random (rare) out-of-sync errors. - Notify F/W to start sending events only after initialization of device is done. This fixes the issue where fatal events were received but ignored. - Fix integer handling (static analysis warning). - Always fetch HBM ECC errors from F/W (if available). - Minor fix in GAUDI-specific initialization code. * tag 'misc-habanalabs-next-2021-02-08' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: habanalabs/gaudi: don't enable clock gating on DMA5 habanalabs: return block size + block ID habanalabs: update security map after init CPU Qs habanalabs: enable F/W events after init done habanalabs/gaudi: use HBM_ECC_EN bit for ECC ERR habanalabs: support fetching first available user CQ habanalabs: improve communication protocol with cpucp habanalabs: fix integer handling issue
-
Greg Kroah-Hartman authored
Merge tag 'phy-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.12 - Updates: - Conversion to YAML binding for: - mtk-xsphy - mtk-tphy - mtk-ufs - HDMI PHY - MIPI DSI PHY - brcmstb-usb-phy - Support for BCM4908 usb phy - Support for Qualcomm SDX55 USB and QMP phy - Support for Qualcomm SM8350 aka Snapdragon 888 UFS and USB phy - Support for Qualcomm SDM660 USB and UFS phy - Support for Qualcomm SC8180X USB and UFS phy - Support for Qualcomm IPQ6018 USB phy - Stm32 phy updates * tag 'phy-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits) phy: cpcap-usb: Simplify bool conversion phy: qcom-qmp: make a const array static, makes object smaller phy: zynqmp: Simplify code by using dev_err_probe() phy: qcom-qmp: Add support for SM8350 UFS phy phy: qcom-qmp: Add UFS V5 registers found in SM8350 dt-bindings: phy: qcom,qmp: Add SM8350 UFS PHY bindings phy: qualcomm: usb28nm: Add MDM9607 init sequence dt-bindings: phy: qcom,qusb2: document ipq6018 compatible phy: qcom-qusb2: add QUSB2 support for IPQ6018 phy: qcom-qmp: Add SC8180X USB phy phy: qcom-qmp: Add SC8180X UFS phy dt-bindings: phy: qcom,qmp: Add SC8180X USB phy dt-bindings: phy: qcom,qmp: Add SC8180X UFS to the QMP binding dt-bindings: phy: qcom-qusb2: Document SDM660 compatible phy: qcom-qusb2: Add configuration for SDM660 phy: qcom-qusb2: Allow specifying default clock scheme dt-bindings: phy: qcom,usb-snps-femto-v2: Add SM8250 and SM8350 bindings phy: qcom-qmp: Add SM8350 USB QMP PHYs dt-bindings: phy: qcom,qmp: Add SM8150, SM8250 and SM8350 USB PHY bindings phy: qcom-qmp: Add support for SDX55 QMP PHY ...
-
Greg Kroah-Hartman authored
Merge tag 'soundwire-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.12-rc1 Updates forv5.12-rc1 are: - New no_pm IO routines and the usage in Intel drivers - Intel driver & Cadence lib updates * tag 'soundwire-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: bus: clarify dev_err/dbg device references soundwire: bus: fix confusion on device used by pm_runtime soundwire: export sdw_write/read_no_pm functions soundwire: bus: use no_pm IO routines for all interrupt handling soundwire: bus: use sdw_write_no_pm when setting the bus scale registers soundwire: bus: use sdw_update_no_pm when initializing a device soundwire: Revert "soundwire: debugfs: use controller id instead of link_id" soundwire: return earlier if no slave is attached soundwire: bus: add better dev_dbg to track complete() calls soundwire: cadence: adjust verbosity in response handling soundwire: cadence: fix ACK/NAK handling soundwire: bus: add more details to track failed transfers soundwire: cadence: add status in dev_dbg 'State change' log soundwire: use consistent format for Slave devID logs soundwire: intel: don't return error when clock stop failed soundwire: debugfs: use controller id instead of link_id MAINTAINERS: soundwire: Add soundwire tree soundwire: sysfs: Constify static struct attribute_group soundwire: cadence: reduce timeout on transactions soundwire: intel: Use kzalloc for allocating only one thing
-
Tomas Winkler authored
Using of snprintf is discouraged in sysfs use the new sysfs_emit() API. Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210208150649.141358-2-tomas.winkler@intel.comSigned-off-by:
-
