We need to hold i_sem while running i_size_write().  But that seems like a
lot of fuss and deadlock potential.  So just write the dang thing.

The NGROUPS changes broke it, and we're not sure how to fixit, and nobody
appears to be working on or testing intermezzo.

From: Tim Hockin <thockin@sun.com>,
      Neil Brown <neilb@cse.unsw.edu.au>,
      me

New groups infrastructure.  task->groups and task->ngroups are replaced by
task->group_info.  Group)info is a refcounted, dynamic struct with an array
of pages.  This allows for large numbers of groups.  The current limit of
32 groups has been raised to 64k groups.  It can be raised more by changing
the NGROUPS_MAX constant in limits.h

From: Rusty Russell <rusty@rustcorp.com.au>

Jeff Garzik disliked the bonding driver knowing it was called "bond0".
Remove that alias, and revert documentation.

From: Rusty Russell <rusty@rustcorp.com.au>

New MODULE_ALIASes in:
1) arch/i386/kernel/microcode.c
2) drivers/char/genrtc.c
3) drivers/ide/ide-tape.c
4) drivers/net/bonding/bond_main.c
5) drivers/net/bsd_comp.c
6) drivers/net/ppp_deflate.c
7) drivers/net/ppp_generic.c

From: Rusty Russell <rusty@rustcorp.com.au>

Someone complained about the number of references to /etc/modules.conf in
the documentation.  While fixing them up (and examples where changed),
removed those which are redundant due to MODULE_ALIAS.

From: Adrian Bunk <bunk@fs.tum.de>

- AMD Elan is a different subarch, you can't configure a kernel that runs
  on both the AMD Elan and other i386 CPUs

- added optimizing CFLAGS for the AMD Elan

From: Adrian Bunk <bunk@fs.tum.de>

gcc 2.95 supports -march=k6 (no need for check_gcc)

From: Adrian Bunk <bunk@fs.tum.de>

add Pentium M and Pentium-4 M options:

- add MPENTIUMM (equivalent to PENTIUMIII except for a bigger
  X86_L1_CACHE_SHIFT)

- document that MPENTIUM4 is the right choice for a Pentium-4 M

From: "Chen, Kenneth W" <kenneth.w.chen@intel.com>

The issue of exceedingly large hash tables has been discussed on the
mailing list a while back, but seems to slip through the cracks.

What we found is it's not a problem for x86 (and most other
architectures) because __get_free_pages won't be able to get anything
beyond order MAX_ORDER-1 (10) which means at most those hash tables are
4MB each (assume 4K page size).  However, on ia64, in order to support
larger hugeTLB page size, the MAX_ORDER is bumped up to 18, which now
means a 2GB upper limits enforced by the page allocator (assume 16K page
size).  PPC64 is another example that bumps up MAX_ORDER.

Last time I checked, the tcp ehash table is taking a whooping (insane!)
2GB on one of our large machine.  dentry and inode hash tables also take
considerable amount of memory.

Setting the size of these tables is difficult: they need to be constrained on
many-zone ia64 machines, but this could cause significant performance
problems when there are (for example) 100 million dentries in cache.
Large-memory machines which do not slice that memory up into huge numbers of
zones do not need to run the risk of this slowdown.

So the sizing algorithms remain essentially unchanged, and boot-time options
are provided which permit the tables to be scaled down.

From: Rusty Russell <rusty@rustcorp.com.au>

The cpu hotplug code actually provides two notifiers: CPU_UP_PREPARE
which preceeds the online and can fail, and CPU_ONLINE which can't.

Current usage is only done at boot, so this distinction doesn't
matter, but it's a bad example to set.  This also means that the
migration threads do not have to be higher priority than the
others, since they are ready to go before any CPU_ONLINE callbacks
are done.

This patch is experimental but fairly straight foward: I haven't been
able to test it since extracting it from the hotplug cpu code, so it's
possible I screwed something up.

From: Rusty Russell <rusty@rustcorp.com.au>

Three more removed CPU notifiers extracted from the hotplug CPU patch.

kernel/softirq.c: the tasklet cpu prepration callback is useless:
the vectors are already initialized to NULL.  Even with the hotplug
CPU patches, they're of little or no use.

fs/buffer.c: once again, they are already initialized to zero.

mm/page_alloc.c: once again, already initialized to zero.

From: Rusty Russell <rusty@rustcorp.com.au>

Move duplicated code to __queue_work(), and don't set the CPU for
queue_delayed_work() until the timer goes off.  The second one only has an
effect on CONFIG_HOTPLUG_CPU where the CPU goes down and the timer goes off
on a different CPU than it was scheduled on.

From: Rusty Russell <rusty@rustcorp.com.au>

Some well-meaning person put a notifier in for CPUs to update the kstat
structures in sched.c.  However, it does nothing, and even with the full
hotplug CPU patch, it still does nothing.

Simple counters very rarely need anything done when CPUs come up or go
down.  If you have per-cpu caches, or per-cpu threads, you need to do
something.  But very rarely for stats.

From: Rusty Russell <rusty@rustcorp.com.au>

These two patches provide the framework for stopping kernel threads to
allow hotplug CPU.  This one just adds kthread.c and kthread.h, next
one uses it.

Most importantly, adds a Monty Python quote to the kernel.

Details:

The hotplug CPU code introduces two major problems:

1) Threads which previously never stopped (migration thread,
   ksoftirqd, keventd) have to be stopped cleanly as CPUs go offline.
2) Threads which previously never had to be created now have
   to be created when a CPU goes online.

Unfortunately, stopping a thread is fairly baroque, involving memory
barriers, a completion and spinning until the task is actually dead
(for example, complete_and_exit() must be used if inside a module).

There are also three problems in starting a thread:
1) Doing it from a random process context risks environment contamination:
   better to do it from keventd to guarantee a clean environment, a-la
   call_usermodehelper.
2) Getting the task struct without races is a hard: see kernel/sched.c
   migration_call(), kernel/workqueue.c create_workqueue_thread().
3) There are races in starting a thread for a CPU which is not yet
   online: migration thread does a complex dance at the moment for
   a similar reason (there may be no migration thread to migrate us).

Place all this logic in some primitives to make life easier:
kthread_create() and kthread_stop().  These primitives require no
extra data-structures in the caller: they operate on normal "struct
task_struct"s.

Other changes:

- Expose keventd_up(), as keventd and migration threads will use kthread to
  launch, and kthread normally uses workqueues and must recognize this case.

- Kthreads created at boot before "keventd" are spawned directly.  However,
  this means that they don't have all signals blocked, and hence can be
  killed.  The simplest solution is to always explicitly block all signals in
  the kthread.

- Change over the migration threads, the workqueue threads and the
  ksoftirqd threads to use kthread.

- module.c currently spawns threads directly to stop the machine, so a
  module can be atomically tested for removal.

- Unfortunately, this means that the current task is manipulated (which
  races with set_cpus_allowed, for example), and it can't set its priority
  artificially high.  Using a kernel thread can solve this cleanly, and with
  kthread_run, it's simple.

- kthreads use keventd, so they inherit its cpus_allowed mask.  Unset it.
  All current users set it explicity anyway, but it's nice to fix.

- call_usermode_helper uses keventd, so the process created inherits its
  cpus_allowed mask.  Unset it.

- Prevent errors in boot when cpus_possible() contains a cpu which is not
  online (ie.  a cpu didn't come up).  This doesn't happen on x86, since a
  boot failure makes that CPU no longer possible (hacky, but it works).

- When the cpu fails to come up, some callbacks do kthread_stop(), which
  doesn't work without keventd (which hasn't started yet).  Call it directly,
  and take care that it restores signal state (note: do_sigaction does a
  flush on blocked signals, so we don't need to repeat it).

From: Dominik Brodowski <linux@dominikbrodowski.de>,
      John Stultz <johnstul@us.ibm.com>,
      Dmitry Torokhov

Add the ACPI Powermanagement Timer as x86 kernel timing source.  Unlike the
Time Stamp Counter, it is a reliable timing source which does not get
affected by aggressive powermanagement features like CPU frequency scaling.

Some ideas and some code are based on Arjan van de Ven's implementation for
2.4, and on R.  Byron Moore's drivers/acpi/hardware/hwtimer.c.


We also replace the loop based delay_pmtmr with a TSC based delay_pmtmr,
which resolves a number of issues caused by the loop based delay.  Unsynced
TSCs as well frequency changing TSCs will effect the length of __delay(), but
it seems this method works best.

From: "Yury V. Umanets" <umka@namesys.com>

This removes a redundant assignment in loop.

From: BlaisorBlade <blaisorblade_spam@yahoo.it>

loop_init doesn't fail gracefully for two reasons:

1) If initialization of loop driver fails, we have an call to
   devfs_add("loop") without any devfs_remove; I add that.

2) On lwn.net 2.6 kernel docs, Jonathan Corbet says: "If you are calling
   add_disk() in your driver initialization routine, you should not fail
   the initialization process after the first call."

So I make loop.c conform to this request by moving add_disk after all
memory allocations.

From: Ben Slusky <sluskyb@paranoiacs.org>

One more patch --- this fixes a minor bio handling bug in the filebacked
code path. I'd fixed it incidentally in the loop-recycle patch.

I don't think you could actually see damage from this bug unless you
run device mapper on top of loop devices, but still this is the correct
behavior.

From: Ben Slusky <sluskyb@paranoiacs.org>

The attached patch changes the loop device transfer functions (including
cryptoloop transfers) to accept page/offset pairs instead of virtual
addresses, and removes the redundant kmaps in do_lo_send, do_lo_receive,
and loop_transfer_bio. Per Andrew Morton's request a while back.

This patch removes the loop feature wherein we remap BIOs for block-backed
loop.  So file-backed and block-backed loop are handled identically.

It cleans up the code a lot and fixes the low-on-memory lockups which
block-backed loop currently suffers.

What we lose is the journalling ordering guarantees which
exts-on-loop-on-blockdev had.  But dm-crypt provides that.

From: Stephen Rothwell <sfr@canb.auug.org.au>

This patch lets 2.6.3-rc4 build and boot on an PPC64 iSeries box (at least
for my configuration).  The veth.o bit in the networking Makefile got there
by accident and should be removed anyway ...

There is more to make it work properly (note the "Temporary hack"), but
this gets us closer.

From: Anton Blanchard <anton@samba.org>

Fix compile warnings and add some type safety to debugger macros.

From: Anton Blanchard <anton@samba.org>

cmd_line was twice the size of saved_command_line but we did a strcpy from
the larger into the smaller.  Create COMMAND_LINE_SIZE and use it.

arch/ppc64/kernel/prom.c:200: warning: missing braces around initializer
arch/ppc64/kernel/prom.c:200: warning: (near initialization for `hmt_thread_data[0]')
arch/ppc64/kernel/prom.c: In function `prom_hold_cpus':
arch/ppc64/kernel/prom.c:1090: warning: implicit declaration of function `_get_PIR'

msg.h uses list_head.  (I'm not sure what config actually required this, but
it is legit).

These no longer do anything.

This patch changes modules API.  It was acked by Arjan@RH and Hubert@Suse.

- Use __pa() around the VGA base address: more friendly for the 4g/4g split.

- Use cpu_relax() rather than open-coding rep_nop().

- Default to 9600 baud

- Move documentation to Documentation/kernel-parameters.txt

- Make CONFIG_EARLY_PRINTK disableable if CONFIG_EMBEDDED

From: Andi Kleen <ak@muc.de>

Implement VGA and serial early printk on x86.  We just include the x86_64
version.

From: Karsten Keil <kkeil@suse.de>

I found a bug in the PPPIOCSPASS PPPIOCSACTIVE IOCTL implementation in
kernel 2.5/2.6.

The current pppd code use a empty filter (uprog.len=0) to detach the filter
in the kernel, but this code was removed in 2.5.71 while fixing a compiler
warning.

Here the new patch, also with better limit checking.

The second patch check for flen == 0 in the filter check too, since later
in this code a filter[flen - 1] access is done, which is not so funny with
flen 0.  Maybe it's not really needed anymore, since with the first patch
it would not longer called with flen=0.

paulus says:

    It looks correct.  Previously we had (and in 2.4 we still have)

        if (uprog.len > 0 && uprog.len < 65536) {
		...

    which gave warnings since uprog.len is unsigned short.  So someone
    decided that both parts of the condition were redundant.

From: Karsten Keil <kkeil@suse.de>

This patch fix a deadlock in HiSax (reported from David Woodhouse
<dwmw2@infradead.org>).  upper layer was called back while holding the card
lock fix is to move the wakeup call into BH handler to avoid direct
callbacks.

From: Karsten Keil <kkeil@suse.de>

- new port of 2.4 I4L core to 2.6

- new port of 2.4 I4L HiSax to 2.6

- fixes for I4L CAPI subsystem to make it stable in 2.6

- fix parameter handling of AVM ISA cards (calle)

- cleanup ISDN config variables

- SMP in act2000 and pcbit driver

- remove check_region in act2000

- mark hysdn, isdnloop and divert as BROKEN_ON_SMP

into ppc970.osdl.org:/home/torvalds/v2.5/linux

Caught by Randy Dunlap.
longrun_cpu_init() only gets called during startup, and calls
other __init routines.

Caught by Randy Dunlap.
longhaul_cpu_init only gets called during startup, and calls
other __init routines.

into ppc970.osdl.org:/home/torvalds/v2.5/linux

into ppc970.osdl.org:/home/torvalds/v2.5/linux

Don't assume the size of a dma_addr_t

Tx descriptor overflow - take II.

Assume tp->dirty_tx = NUM_TX_DESC/2, tp->cur_tx = NUM_TX_DESC - 1,
watch "entry" go beyond NUM_TX_DESC. Actually this is where the same
bug in r8169 driver comes from.

From: Pablo Menichini <pablo@menichini.com.ar>
and maximilian attems <janitor@sternwelten.at>


while looking at kj mails from 200212 and 200301
this patch slept through
originally from: Pablo Menichini <pablo@menichini.com.ar>
rediffed and compile tested
patch applies on plain 2.6.0

maximilian attems <janitor@sternwelten.at>

handle kmalloc failures during init

diff -puN drivers/net/tokenring/3c359.c~tr3c_kmalloc drivers/net/tokenring/3c359.c


 linux-261-bk4-kj1-rddunlap/drivers/net/tokenring/3c359.c |   13 +++++++++++++
 1 files changed, 13 insertions(+)