Update `nb85e_uart' driver for recent serial framework changes

Make NB85E_UART_CKSR_MAX_FREQ (in nb85e_uart driver) overridable
[The proper value is CPU-dependent]

Add v850 nanosecond stat fields

Add support for AS85EP1 platform to v850 arch

Add v850 versions of dump_stack and show_stack
Also move v850 show_regs to same source file (bug.c)

Add v850 support for new module loader

Add asm macros on v850 so the size of asm data objects can be recorded
[This just makes it easier to see the sizes using readelf or whatever]

Fix some minor type problems in v850 code
[Mostly signed/unsigned mismatches]

Consolidate various v850 platform banner printks

cpu_buffer.c needs errno.h for ENOMEM.

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/lsm-tree

That annoying ldm message is just debugging output somebody forgot to
remove.

into kroah.com:/home/greg/linux/BK/lsm-2.5

into groveronline.com:/root/bk/linux-acpi

into groveronline.com:/root/bk/linux-acpi

Shrinking a huge number of dentries or inodes can hold dcache_lock or
inode_lock for a long time.  Not only does this hold off preemption -
holding those locks basically shuts down the whole VFS.

A neat fix for all such caches is to chunk the work up at the
shrink_slab() level.

I made the chunksize pretty small, for scalability reasons - avoid
holding the lock for too long so another CPU can come in, acquire it
and go off to do some work.

Running sync_blockdev() inside lock_kernel causes long scheduling
stalls under some conditions because the lock_kernel() disables
preemption.

We don't need the BKL across sync_blockdev(), so move it down a bit.

This is a minimal fix - we probably don't need BKL for much at all in
there.

When the VM is under heavy load and a page allocator caller is holding
the BKL there can be several-millisecond scheduling stalls.

So add a cond_resched() at every 32nd page (approx).

From Hugh.  Remove some strangeness in the swapoff path.

"it dates from the days when that block set *swap_map to 0, but in
 2.4.13 I changed it to set *swap_map to 1 and delete_from_swap_cache
 afterwards: it's been wrong ever since, hasn't it?  swap_list_locking
 can go, it was there to guard nr_swap_pages for si_swapinfo; the
 swap_device_locking has to stay because swap_map is an array of
 unsigned _shorts_."

There are a couple of statistical functions which scan the entire swap
map counting things up, to display in /proc.

On my machine, these hold spinlocks for 19 milliseconds which is
unacceptable from a scheduling latency point of view.

And an application which sits in a loop reading /proc/swaps on a large
machine is probably a decent denial-of-service attack - it will limit
swap allocations to tens of pages per second.

So add a counter to swap_info_struct and use it to track how many pages
are currently in use, so those reporting functions don't need to add
them all up.

This is the first in a little batch of patches which address long-held
locks in the VFS/MM layer which are affecting our worst-case scheduling
latency, and are making CONFIG_PREEMPT not very useful.

We end up with a worst-case of 500 microseconds at 500MHz, which is
very good.  Unless you do an exit with lots of mmapped memory.
unmap_page_range() needs work.

Some of these patches also add rescheduling points for non-preemptible
kernels - where I felt that the code path could be long enough to be
perceptible.



Three places in the generic pagecache functions need manual
rescheduling points even for non-preemptible kernels:

- generic_file_read()  (Can hold the CPU for seconds)

- generic_file_write() (ditto)

- filemap_fdatawait().  This won't hold the CPU for so long, but it
  can walk many thousands of pages under the lock.  It needs a lock
  drop and scheduling point for both preemptible and non-preemptible
  kernels.  (This one's a bit ugly...)

pdflush writes back chunks of ~1000 pages.  It currently takes a short
nap if it writes back no pages at all.  That could cause it to write
back lots of small batches of pages, as it bounces against a congested
queue.

Change it to sleep if it failed to write back the entire batch against
a congested queue.  Ths reduces the context switch rate a little.

The context switch rate is still fairly high (150/sec) - this appears
to be due to add_disk_randomness() scheduling a work function.

Patch from Bill Irwin.  It has the potential to break userspace
monitoring tools a little bit, and I'm a rater uncertain about
how useful the per-process per-cpu accounting is.

Bill sent this out as an RFC on July 29:

"These statistics severely bloat the task_struct and nothing in
 userspace can rely on them as they're conditional on CONFIG_SMP.  If
 anyone is using them (or just wants them around), please speak up."

And nobody spoke up.

If we apply this, the contents of /proc/783/cpu will go from

	cpu  1 1
	cpu0 0 0
	cpu1 0 0
	cpu2 1 1
	cpu3 0 0

to

	cpu  1 1

And we shall save 256 bytes from the ia32 task_struct.

On my SMP build with NR_CPUS=32:

Without this patch, sizeof(task_struct) is 1824, slab uses a 1-order
allocation and we are getting 2 task_structs per page.

With this patch, sizeof(task_struct) is 1568, slab uses a 2-order
allocation and we are getting 2.5 task_structs per page.

So it seems worthwhile.

(Maybe this highlights a shortcoming in slab.  For the 1824-byte case
it could have used a 0-order allocation)

Patch from Petr Baudis <pasky@ucw.cz>

This patch (against 2.5.49) updates Documentation/kernel-parameters.txt
to the current state of kernel.  It was somehow abadonded lately, so I
did my best, but it's possible that I still missed some of the options
- thus, if you will notice your favourite boot option missing there,
please speak up.  Note also that I will probably send up another update
after few further kernel releases..

Also, I attempted to introduce some uniform format to the entries, I
added the format description where I was able to find it out and
decypher it, and I also added gross amount of external links to the
headers of the source files or to the README-like files, where the
options are described into more degree.  This way, hopefully this file
has a chance to be actually usable for the users ;-).

There are almost certainly some entries which I missed, it was really a
huge number and the main reason is that some of the boot options don't
use the __setup macro, which I grep'd for.

I hope the patch is ok, there should be no problems with it. Please apply.

Note that this is the fourth submission of the patch - I took the
opportunity and updated the patch from 2.5.48 to 2.5.49.  AFAIK mutt
shouldn't mangle the patch in any way, so it should apply cleanly to
your tree, Linus.

Patch from Dipankar Sarma <dipankar@gamebox.net>

This is a trivial cleanup removing two old unused macros from
kernel_stat.h that made no sense with the new per-CPU kstat.
Also included a few finicky coding style changes. Please apply.

Patch from Ravikiran G Thirumalai <kiran@in.ibm.com>

Allows the kernel profiler to use a shift value of zero for
high-resolution profiling.

So instead of overloading a shift of zero to mean "not profiling", use
a separate flag for that.

This means that anyone who is currently using "profile=0" to disable
profiling has accidentally turned profiling on, so I added a printk.

- Missing parentheses around macro arg in __pte_offest()

- struct page_state needs to be cacheline aligned (the first seven
  fields should be in the same cacheline)

blk_run_queues() places queues onto a local list without locking.  But
interrupt-time activity in scsi_lib.c will replug these queues, which
involves accessing that list which blk_run_queues() is walking.

Net effect: list corruption and an oops.  Very hard to reproduce...

So hold the lock while blk_run_queues() is walking the local list.

The patch was acked by Jens.  It also uninlines a few largeish
functions and adds a couple of WARN_ON()s in code which worried me.

Cset exclude: davej@codemonkey.org.uk|ChangeSet|20021126023731|33210

into home.transmeta.com:/home/torvalds/v2.5/linux

Cset exclude: alan@lxorguk.ukuu.org.uk|ChangeSet|20021126021252|43411

into home.transmeta.com:/home/torvalds/v2.5/linux

into samba.org:/home/paulus/kernel/for-linus-ppc

Otherwise a UDMA CD-ROM is correctly set up and then panics the kernel 8(
The UDMA rule is on disks not on CD

into tetrachloride.(none):/home/davej/src/watchdog