By accident, the previous patch duplicated the initialization
of the wake_tx_queue callback. Fix that by removing the new
initializations.

Fixes: a790cc3a ("wifi: mac80211: add wake_tx_queue callback to drivers")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

All drivers are now using mac80211 internal queues (iTXQs).
Drop mac80211 internal support for the old push path.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Pull in wireless/main content since some new code would
otherwise conflict with it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211 is fully switching over to the internal TX queue (iTXQ)
implementation. Update all drivers not yet providing the now mandatory
wake_tx_queue() callback.

As an side effect the netdev interfaces of all updated drivers will
switch to the noqueue qdisc.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
[add staging drivers]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Start to align the TX handling to only use internal TX queues (iTXQs):

Provide a handler for drivers not having a custom wake_tx_queue
callback and update the documentation.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In case of 4way handshake offload, transition disable policy
updated by the AP during EAPOL 3/4 is not updated to the upper layer.
This results in mismatch between transition disable policy
between the upper layer and the driver. This patch addresses this
issue by updating transition disable policy as part of port
authorization indication.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Remove unused has_mrr (has multi-rate retry capabilities) member
from struct minstrel_priv (only set once in minstrel_ht_alloc, never
used again).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This should of course be CONFIG_, not CPTCFG_, which is an
artifact from working with backports.

Fixes: 9dd19538 ("wifi: nl80211/mac80211: clarify link ID in control port TX")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

HE added support for dynamic fragmentation inside aggregation
sessions, but no existing driver ever advertises it. Thus,
remove the code for now, it cannot work as-is in MLO. For it
to properly work in MLO, we'd need to validate that the frag
level is identical across all the link bands/iftypes, which
is a good amount of complex code that's just not worth it as
long as no driver has support for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If the deflink of the station is on 6 GHz, then it won't have HT.
If at the same time we're using MLO, then vif.bss_conf isn't used,
and thus vif.bss_conf.chandef.chan is NULL, causing the code to
crash.

Fix this by just checking for both HT and HE, and refusing the
aggregation session if both are not present. This might be a bit
wrong since it would accept an aggregation session from a peer
that has HE but no HT on 2.4 or 5 GHz, but such a peer shouldn't
exist in the first place, and it probably supports aggregation if
it has HE support.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This won't work right at least with the code as it is, so
at least for now just assume it's never set for MLO. It may
very well never change, almost no drivers support it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Fix the code that sets the DTIM period to always propagate it
into link->conf->dtim_period and not overwrite it, while still
preferring to set it from the beacon data if available.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If the station has no HT, we deny the aggregation session
but the error message talks about QoS; change it to say HT
instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

It's useful to know which link was used for the association,
mark it when printing the links.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Ensure that the link ID matches in auth/assoc continuation,
otherwise we need to reset all the data.

Fixes: 81151ce4 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If association to an AP without a link 0 fails, then we crash in
tracing because it assumes that either ap_mld_addr or link 0 BSS
is valid, since we clear sdata->vif.valid_links and then don't
add the ap_mld_addr to the struct.

Since we clear also sdata->vif.cfg.ap_addr, keep a local copy of
it and assign it earlier, before clearing valid_links, to fix
this.

Fixes: 81151ce4 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The subelements obviously start after the common data, including
the common multi-link element structure definition itself. This
bug was possibly just hidden by the higher bits of the control
being set to 0, so the iteration just found one bogus element
and most of the code could continue anyway.

Fixes: 0f48b8b8 ("wifi: ieee80211: add definitions for multi-link element")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We might sometimes need to use RCU and locking in the same code
path, so add the two variants link_conf_dereference_check() and
link_sta_dereference_check().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Since this frame is addressed from/to an MLD, it should be
built with the correct AP MLD address (in station mode) to
be encrypted properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If any driver relies entirely on the scan request BSSID,
then that would be wrong for internal scans. Initialize
it to the broadcast address since we don't otherwise use
the field.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Currently, we rely only on the AP capability. If the AP supports
TWT responder we will advertise TWT requester even if the driver
or HW doesn't support it. Fix this by checking the HW capability.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We should set the parameters here per link, except
unfortunately ap_isolate, but we can't really change
that anymore so it'll remain a quirk in the API in
that you need to change it on one of the valid links
and it'll apply to all.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We clearly need the link ID here, to know the right BSS
to configure. Use/require it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This management frame is intended for the MLD so we
treat it in mac80211 as MLD addressed as well, and
should therefore use the MLD address of the AP for
the BSSID field in the frame, address translation
applies.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We use this to look up the destination station, so it
needs to be the MLD address of the AP for an MLO; use
ap_addr instead of the BSSID.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In case the AP returned a non success status for one of the links,
do not activate the link.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When processing an association response frame for a Multi-Link
connection, extract the per station profile for each additional
link, and use it for parsing the link elements.

As the Multi-Link element might be fragmented, add support for
reassembling a fragmented element. To simplify memory management
logic, extend 'struct ieee802_11_elems' to hold a scratch buffer,
which is used for the defragmentation. Once an element is
reconstructed in the scratch area, point the corresponding element
pointer to it. Currently only defragmentation of Multi-Link element
and the contained per-STA profile subelement is supported.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The Multi-Link element can be fragmented, thus its size can exceed 254.
Thus, modify ieee80211_mle_size_ok() to use 'size_t len' instead of
'u8 len'.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The common size is part of the length in the data
so don't add it again.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Add a function to validate EHT Multi-Link per station profile length.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

For assoc and connect result APIs, support reporting
failed links; they should still come with the BSS
pointer in the case of assoc, so they're released
correctly. In the case of connect result, this is
optional.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

During link switching, the active links change, so we need to
recalculate the aggregate data in the stations.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Add the link address to the per-link information, but only if we are
using MLO.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Create debugfs data per-link. For drivers, there is a new operation
link_sta_add_debugfs which will always be called.

For non-MLO, the station directory will be used directly rather than
creating a corresponding subdirectory. As such, non-MLO drivers can
simply continue to create the data from sta_debugfs_add.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
[add missing inlines if !CONFIG_MAC80211_DEBUGFS]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

While often not needed, this considerably simplifies going from a link
to the STA. This helps in cases such as debugfs where a single pointer
should allow accessing a specific link and the STA.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), split the memcpy() of the header and the payload
so no false positive run-time overflow warning will be generated.

[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Syzkaller reports buffer overflow false positive as follows:
------------[ cut here ]------------
memcpy: detected field-spanning write (size 8) of single field
	"&compat_event->pointer" at net/wireless/wext-core.c:623 (size 4)
WARNING: CPU: 0 PID: 3607 at net/wireless/wext-core.c:623
	wireless_send_event+0xab5/0xca0 net/wireless/wext-core.c:623
Modules linked in:
CPU: 1 PID: 3607 Comm: syz-executor659 Not tainted
	6.0.0-rc6-next-20220921-syzkaller #0
[...]
Call Trace:
 <TASK>
 ioctl_standard_call+0x155/0x1f0 net/wireless/wext-core.c:1022
 wireless_process_ioctl+0xc8/0x4c0 net/wireless/wext-core.c:955
 wext_ioctl_dispatch net/wireless/wext-core.c:988 [inline]
 wext_ioctl_dispatch net/wireless/wext-core.c:976 [inline]
 wext_handle_ioctl+0x26b/0x280 net/wireless/wext-core.c:1049
 sock_ioctl+0x285/0x640 net/socket.c:1220
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:870 [inline]
 __se_sys_ioctl fs/ioctl.c:856 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
 [...]
 </TASK>

Wireless events will be sent on the appropriate channels in
wireless_send_event(). Different wireless events may have different
payload structure and size, so kernel uses **len** and **cmd** field
in struct __compat_iw_event as wireless event common LCP part, uses
**pointer** as a label to mark the position of remaining different part.

Yet the problem is that, **pointer** is a compat_caddr_t type, which may
be smaller than the relative structure at the same position. So during
wireless_send_event() tries to parse the wireless events payload, it may
trigger the memcpy() run-time destination buffer bounds checking when the
relative structure's data is copied to the position marked by **pointer**.

This patch solves it by introducing flexible-array field **ptr_bytes**,
to mark the position of the wireless events remaining part next to
LCP part. What's more, this patch also adds **ptr_len** variable in
wireless_send_event() to improve its maintainability.

Reported-and-tested-by: syzbot+473754e5af963cf014cf@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/00000000000070db2005e95a5984@google.com/Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

STP topology change notification packets only have a payload of 7 bytes,
so they get dropped due to the skb->len < hdrlen + 8 check.
Fix this by removing the extra 8 from the skb->len check and checking the
return code on the skb_copy_bits calls.

Fixes: 2d1c304c ("cfg80211: add function for 802.3 conversion with separate output buffer")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Properly handle TX stop for internal queues (iTXQs) within mac80211.

mac80211 must not stop netdev queues when using mac80211 iTXQs.
For these drivers the netdev interface is created with IFF_NO_QUEUE.

While netdev still drops frames for IFF_NO_QUEUE interfaces when we stop
the netdev queues, it also prints a warning when this happens:
Assuming the mac80211 interface is called wlan0 we would get
"Virtual device wlan0 asks to queue packet!" when netdev has to drop a
frame.

This patch is keeping the harmless netdev queue starts for iTXQ drivers.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Since AP_VLAN interfaces are not passed to the driver, check offload_flags
on the bss vif instead.
Reported-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Fixes: 80a915ec ("mac80211: add rx decapsulation offload support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>