ASoC: Updates for v3.15

Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:

 - Lots of cleanups from Takashi for enumerations; the original API for
   these was error prone so he's refactored lots of code to use more
   modern APIs which avoid issues.
 - Elimination of the ASoC level wrappers for I2C and SPI moving us
   closer to converting to regmap completely and avoiding some
   randconfig hassle.
 - Provide both manually and transparently locked DAPM APIs rather than
   a mix of the two fixing some concurrency issues.
 - Start converting CODEC drivers to use separate bus interface drivers
   rather than having them all in one file helping avoid dependency
   issues.
 - DPCM support for Intel Haswell and Bay Trail platforms.
 - Lots of work on improvements for simple-card, DaVinci and the Renesas
   rcar drivers.
 - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
   CSR SiRF SoC.

# gpg: Signature made Wed 12 Mar 2014 23:05:45 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

ASoC: Fixes for v3.14

A few things here:
 - Avoid memory leaks in error cases with DPCM, this code has never been
   that well tested in mainline due to the lack of mainline drivers but
   we now have one queued for the merge window!
 - Fix the N810 audio driver to load when booted with DT since the
   platform was converted to DT during the merge window.
 - Fixes for initialisation of some MFD drivers that are probably unused
   in mainline

# gpg: Signature made Mon 10 Mar 2014 18:21:32 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

Use table based setup to register the DAPM widgets and routes.  This on one hand
makes the code a bit shorter and cleaner and on the other hand the board level
DAPM elements get registered in the card's DAPM context rather than in the
CODEC's DAPM context.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

snd_soc_dapm_mutex_unlock() wants a pointer to the DAPM context, not the CODEC.

Fixes: 03510ca0 ("ASoC: ams-delta: Update locking around use of DAPM pin API")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge remote-tracking branches 'asoc/topic/wm8996', 'asoc/topic/wm9081' and 'asoc/topic/wm9705' into asoc-next

Merge remote-tracking branches 'asoc/topic/wm8961', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8983', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8993' and 'asoc/topic/wm8994' into asoc-next

Merge remote-tracking branches 'asoc/topic/wm5100', 'asoc/topic/wm8523', 'asoc/topic/wm8731', 'asoc/topic/wm8737', 'asoc/topic/wm8741', 'asoc/topic/wm8753', 'asoc/topic/wm8903', 'asoc/topic/wm8904', 'asoc/topic/wm8940' and 'asoc/topic/wm8955' into asoc-next

Merge remote-tracking branches 'asoc/topic/tlv320aic23', 'asoc/topic/tlv320aic26', 'asoc/topic/tlv320aic32x4', 'asoc/topic/tlv320aic3x', 'asoc/topic/tlv320dac33', 'asoc/topic/twl4030', 'asoc/topic/twl6040', 'asoc/topic/uda1380', 'asoc/topic/wl1273' and 'asoc/topic/wm2200' into asoc-next

Merge remote-tracking branches 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/sh', 'asoc/topic/simple', 'asoc/topic/sirf', 'asoc/topic/sn95031', 'asoc/topic/ssm2602' and 'asoc/topic/stac9766' into asoc-next

Merge remote-tracking branches 'asoc/topic/ml26124', 'asoc/topic/of', 'asoc/topic/omap', 'asoc/topic/pxa' and 'asoc/topic/rcar' into asoc-next

Merge remote-tracking branches 'asoc/topic/da7213', 'asoc/topic/da732x', 'asoc/topic/da9055', 'asoc/topic/davinci', 'asoc/topic/fsl', 'asoc/topic/fsl-esai', 'asoc/topic/fsl-sai' and 'asoc/topic/fsl-spdif' into asoc-next

Merge remote-tracking branches 'asoc/topic/arizona', 'asoc/topic/atmel', 'asoc/topic/cirrus', 'asoc/topic/cs4271', 'asoc/topic/cs42l51', 'asoc/topic/cs42l52', 'asoc/topic/cs42l73' and 'asoc/topic/da7210' into asoc-next

Merge remote-tracking branches 'asoc/topic/88pm860x', 'asoc/topic/ad1836', 'asoc/topic/ad193x', 'asoc/topic/adau1977', 'asoc/topic/ak4104', 'asoc/topic/ak4641', 'asoc/topic/ak4671' and 'asoc/topic/alc5623' into asoc-next

ASoC: Fixes for v3.14

A few things here:
 - Avoid memory leaks in error cases with DPCM, this code has never been
   that well tested in mainline due to the lack of mainline drivers but
   we now have one queued for the merge window!
 - Fix the N810 audio driver to load when booted with DT since the
   platform was converted to DT during the merge window.
 - Fixes for initialisation of some MFD drivers that are probably unused
   in mainline

# gpg: Signature made Mon 10 Mar 2014 18:21:32 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

regmap should handle any byte ordering issues required, it is looking for
a byte stream from the bus, so don't set 16 bits per word. This is likely
to have tested out OK due to use of an unmerged SPI controller driver.
Signed-off-by: Mark Brown <broonie@linaro.org>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>

Freeing the current list element while iterating over the list will cause a use
after free since the iterator function will still use the current element to
look up the next. Use list_for_each_safe() and remove the element from the list
before freeing it to avoid this.

Fixes: 1438c2f6 ("ASoC: Add a per component dai list")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

For controls registers with snd_soc_add_dai_controls snd_kcontrol_chip() returns
a pointer to the DAI, not to the CODEC.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

Use table based setup to register the DAPM widgets and routes.  This on one hand
makes the code a bit shorter and cleaner and on the other hand the board level
DAPM elements get registered in the card's DAPM context rather than in the
CODEC's DAPM context.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

Try to spot locking issues by asserting that the DAPM mutex is held when
it should be. There's a bit of fun due to us not requiring the lock to be
held prior to the card being instantiated which mean we need to wrap the
assert in some paths and this isn't methodical by any stretch of the
imagination.
Signed-off-by: Mark Brown <broonie@linaro.org>

The function is not called outside soc-dapm.c so there is no need for it
to be exported.
Signed-off-by: Mark Brown <broonie@linaro.org>

Now that every DAI has a component we can track the DAIs on a per component
basis. This simplifies the DAI lookup when we are only interested in DAIs of a
specific component and also makes it possible to have multiple components with
the same parent device and also register DAIs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

snd_soc_register_dais() looks up the CODEC that is registering the DAIs by
looping over all registered CODECs. This patch updates the code to
simply pass the CODEC that registers the DAIs to snd_soc_register_dais() thus
avoiding the lookup.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

snd_soc_register_dais() has basically the same code as snd_soc_register_dai(),
but running in a loop. The only difference is that snd_soc_register_dai() calls
fmt_single_name() to generate the DAIs name and snd_soc_register_dais() calls
fmt_multiple_name(). This patch pushes the check in __snd_soc_register_component()
which decides whether to call snd_soc_register_dai() or snd_soc_register_dais()
to snd_soc_register_dais() to decide which naming scheme to use. This allows us
to remove snd_soc_register_dai().

The patch also updates snd_soc_register_dais() to unregister every DAI it finds
for the component rather than trying to unregister one DAI for each DAI that was
registered. Both have the same result since there won't be more DAIs than what
have been registered, but the former is easier to implement.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

Merge branch 'topic/pcm' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-core

Merge remote-tracking branches 'asoc/fix/88pm860', 'asoc/fix/omap' and 'asoc/fix/si476x' into asoc-linus

The 88pm860 is a MFD device and the CODEC driver is using the regmap struct of
the parent device, hence automatic IO setup will not work and we need to
manually call snd_soc_codec_set_cache_io(). The issue was introduced in commit
f9ded3b2 ("ASoC: 88pm860x: Use regmap for I/O").

Fixes: f9ded3b2 ("ASoC: 88pm860x: Use regmap for I/O").
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

The si476x is a MFD device and the CODEC driver is using the regmap struct of
the parent device, hence automatic IO setup will not work and we need to
manually call snd_soc_codec_set_cache_io(). The issue was introduced commit
d6173df3 ("ASoC: si476x: Remove custom register I/O implementation")

Fixes: d6173df3 ("ASoC: si476x: Remove custom register I/O implementation")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

Use table based setup to register the DAPM widgets and routes. This on one hand
makes the code a bit shorter and cleaner and on the other hand the board level
DAPM elements get registered in the card's DAPM context rather than in the
CODEC's DAPM context.

While we are at it also remove the snd_soc_dapm_enable_pin() in the init
callback. Pins are enabled by default.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

snd_card.name is now option on DT case.
non-DT case can follow same style,
and it is understandable from platform point of view.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>