- 20 Oct, 2018 31 commits
-
-
Linus Torvalds authored
commit eb66ae03 upstream. Jann Horn points out that our TLB flushing was subtly wrong for the mremap() case. What makes mremap() special is that we don't follow the usual "add page to list of pages to be freed, then flush tlb, and then free pages". No, mremap() obviously just _moves_ the page from one page table location to another. That matters, because mremap() thus doesn't directly control the lifetime of the moved page with a freelist: instead, the lifetime of the page is controlled by the page table locking, that serializes access to the entry. As a result, we need to flush the TLB not just before releasing the lock for the source location (to avoid any concurrent accesses to the entry), but also before we release the destination page table lock (to avoid the TLB being flushed after somebody else has already done something to that page). This also makes the whole "need_flush" logic unnecessary, since we now always end up flushing the TLB for every valid entry. Reported-and-tested-by:
Jann Horn <jannh@google.com> Acked-by:
Will Deacon <will.deacon@arm.com> Tested-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit 4f4374a9 which was commit a6795a58 upstream. Turns out this causes problems and was to fix a patch only in the 4.19 and newer tree. Reported-by:
Amir Goldstein <amir73il@gmail.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Christophe Leroy authored
commit 8183d99f upstream. feature fixups need to use patch_instruction() early in the boot, even before the code is relocated to its final address, requiring patch_instruction() to use PTRRELOC() in order to address data. But feature fixups applies on code before it is set to read only, even for modules. Therefore, feature fixups can use raw_patch_instruction() instead. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reported-by:
David Gounaris <david.gounaris@infinera.com> Tested-by:
-
Arindam Nath authored
[ Upstream commit 5ebb1bc2 ] ACPI HID devices do not actually have an alias for them in the IVRS. But dev_data->alias is still used for indexing into the IOMMU device table for devices being handled by the IOMMU. So for ACPI HID devices, we simply return the corresponding devid as an alias, as parsed from IVRS table. Signed-off-by:
Arindam Nath <arindam.nath@amd.com> Fixes: 2bf9a0a1 ('iommu/amd: Add iommu support for ACPI HID devices') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Michael Neuling authored
[ Upstream commit 96dc89d5 ] Current we store the userspace r1 to PACATMSCRATCH before finally saving it to the thread struct. In theory an exception could be taken here (like a machine check or SLB miss) that could write PACATMSCRATCH and hence corrupt the userspace r1. The SLB fault currently doesn't touch PACATMSCRATCH, but others do. We've never actually seen this happen but it's theoretically possible. Either way, the code is fragile as it is. This patch saves r1 to the kernel stack (which can't fault) before we turn MSR[RI] back on. PACATMSCRATCH is still used but only with MSR[RI] off. We then copy r1 from the kernel stack to the thread struct once we have MSR[RI] back on. Suggested-by:
Breno Leitao <leitao@debian.org> Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Michael Neuling authored
[ Upstream commit cf13435b ] When we treclaim we store the userspace checkpointed r13 to a scratch SPR and then later save the scratch SPR to the user thread struct. Unfortunately, this doesn't work as accessing the user thread struct can take an SLB fault and the SLB fault handler will write the same scratch SPRG that now contains the userspace r13. To fix this, we store r13 to the kernel stack (which can't fault) before we access the user thread struct. Found by running P8 guest + powervm + disable_1tb_segments + TM. Seen as a random userspace segfault with r13 looking like a kernel address. Signed-off-by:
-
Tao Ren authored
[ Upstream commit 4451d3f5 ] Currently, the aspeed MATCH1 register is updated to <current_count - cycles> in set_next_event handler, with the assumption that COUNT register value is preserved when the timer is disabled and it continues decrementing after the timer is enabled. But the assumption is wrong: RELOAD register is loaded into COUNT register when the aspeed timer is enabled, which means the next event may be delayed because timer interrupt won't be generated until <0xFFFFFFFF - current_count + cycles>. The problem can be fixed by updating RELOAD register to <cycles>, and COUNT register will be re-loaded when the timer is enabled and interrupt is generated when COUNT register overflows. The test result on Facebook Backpack-CMM BMC hardware (AST2500) shows the issue is fixed: without the patch, usleep(100) suspends the process for several milliseconds (and sometimes even over 40 milliseconds); after applying the fix, usleep(100) takes averagely 240 microseconds to return under the same workload level. Signed-off-by:
Tao Ren <taoren@fb.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Tested-by:
Lei YU <mine260309@gmail.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 8ac1ee6f ] Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of array 'eq->affinity_mask' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask)) ~~~~~^~~~~~~~~~~~~ 1 warning generated. Use cpumask_available, introduced in commit f7e30f01 ("cpumask: Add helper cpumask_available()"), which does the proper checking and avoids this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/86Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Johannes Thumshirn authored
[ Upstream commit f1f1fada ] When sd_init_command() get's a command with a unknown req_op() it crashes the system via BUG(). This makes debugging the actual reason for the broken request cmd_flags pretty hard as the system is down before it's able to write out debugging data on the serial console or the trace buffer. Change the BUG() to a WARN_ON() and return BLKPREP_KILL to fail gracefully and return an I/O error to the producer of the request. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Wen Xiong authored
[ Upstream commit 318ddb34 ] While dlpar adding primary ipr adapter back, driver goes through adapter initialization then schedule ipr_worker_thread to start te disk scan by dropping the host lock, calling scsi_add_device. Then get the adapter reset request again, so driver does scsi_block_requests, this will cause the scsi_add_device get hung until we unblock. But we can't run ipr_worker_thread to do the unblock because its stuck in scsi_add_device. This patch fixes the issue. [mkp: typo and whitespace fixes] Signed-off-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Alexandru Gheorghe authored
[ Upstream commit 69be1984 ] Currently, if userspace calls drm_wait_vblank before the crtc is activated the crtc vblank_enable hook is called, which in case of malidp driver triggers some warninngs. This happens because on device init we don't inform the drm core about the vblank state by calling drm_crtc_vblank_on/off/reset which together with drm_vblank_get have some magic that prevents calling drm_vblank_enable when crtc is off. Signed-off-by:
Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Jisheng Zhang authored
[ Upstream commit 9024143e ] When programming the inbound/outbound ATUs, we call usleep_range() after each checking PCIE_ATU_ENABLE bit. Unfortunately, the ATU programming can be executed in atomic context: inbound ATU programming could be called through pci_epc_write_header() =>dw_pcie_ep_write_header() =>dw_pcie_prog_inbound_atu() outbound ATU programming could be called through pci_bus_read_config_dword() =>dw_pcie_rd_conf() =>dw_pcie_prog_outbound_atu() Fix this issue by calling mdelay() instead. Fixes: f8aed6ec ("PCI: dwc: designware: Add EP mode support") Fixes: d8bbeb39 ("PCI: designware: Wait for iATU enable") Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> [lorenzo.pieralisi@arm.com: commit log update] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by:
-
Kazuya Mizuguchi authored
[ Upstream commit 2fe397a3 ] EtherAVB hardware requires 0 to be written to status register bits in order to clear them, however, care must be taken not to: 1. Clear other bits, by writing zero to them 2. Write one to reserved bits This patch corrects the ravb driver with respect to the second point above. This is done by defining reserved bit masks for the affected registers and, after auditing the code, ensure all sites that may write a one to a reserved bit use are suitably masked. Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Christian Lamparter authored
[ Upstream commit 08e39982 ] On the Netgear WNDAP620, the emac ethernet isn't receiving nor xmitting any frames from/to the RTL8363SB (identifies itself as a RTL8367RB). This is caused by the emac hardware not knowing the forced link parameters for speed, duplex, pause, etc. This begs the question, how this was working on the original driver code, when it was necessary to set the phy_address and phy_map to 0xffffffff. But I guess without access to the old PPC405/440/460 hardware, it's not possible to know. Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Michael Schmitz authored
[ Upstream commit 52d2c7bf ] The CapsLock key on Atari keyboards is not a toggle, it does send the normal make and break scancodes. Drop the CapsLock toggle handling code, which did cause the CapsLock key to merely act as a Shift key. Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Andreas Schwab authored
[ Upstream commit 9e62df51 ] Fix errors in Atari keymap (mostly in keypad, help and undo keys). Patch provided on debian-68k ML by Andreas Schwab <schwab@linux-m68k.org>, keymap array size and unhandled scancode limit adjusted to 0x73 by me. Tested-by:
-
Alexander Shishkin authored
[ Upstream commit 59d08d00 ] This adds Intel(R) Trace Hub PCI ID for Ice Lake PCH. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Laura Abbott authored
[ Upstream commit adad633a ] While reviewing another part of the code, Kees noticed that the strncpy of the partition name might not always be NUL terminated. Switch to using strscpy which does this safely. Reported-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Laura Abbott <labbott@redhat.com> Reviewed-by:
-
Laura Abbott authored
[ Upstream commit d792d4c4 ] There's currently a warning about string overflow with strncat: drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_probe': drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:3479:2: error: 'strncat' specified bound 64 equals destination size [-Werror=stringop-overflow=] strncat(vscsi->eye, vdev->name, MAX_EYE); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Switch to a single snprintf instead of a strcpy + strcat to handle this cleanly. Signed-off-by:
-
Keerthy authored
[ Upstream commit 3b7d96a0 ] The 32k clocksource is NONSTOP for non-am43 SoCs. Hence add the flag for all the other SoCs. Reported-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Keerthy <j-keerthy@ti.com> Acked-by:
-
Marek Lindner authored
[ Upstream commit 4c4af690 ] The hardif_neigh refcounter is to be decreased by the queued work and currently is never decreased if the queue_work() call fails. Fix by checking the queue_work() return value and decrease refcount if necessary. Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Marek Lindner authored
[ Upstream commit 5af96b9c ] The backbone_gw refcounter is to be decreased by the queued work and currently is never decreased if the queue_work() call fails. Fix by checking the queue_work() return value and decrease refcount if necessary. Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit ae3cdc97 ] The function batadv_tvlv_handler_register is responsible for adding new tvlv_handler to the handler_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: ef261577 ("batman-adv: tvlv - basic infrastructure") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit e7136e48 ] The function batadv_tt_global_orig_entry_add is responsible for adding new tt_orig_list_entry to the orig_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: d657e621 ("batman-adv: add reference counting for type batadv_tt_orig_list_entry") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 94cb82f5 ] The function batadv_softif_vlan_get is responsible for adding new softif_vlan to the softif_vlan_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: 5d2c05b2 ("batman-adv: add per VLAN interface attribute framework") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit fa122fec ] The function batadv_nc_get_nc_node is responsible for adding new nc_nodes to the in_coding_list and out_coding_list. It first checks whether the entry already is in the list or not. If it is, then the creation of a new entry is aborted. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: d56b1705 ("batman-adv: network coding - detect coding nodes and remove these after timeout") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit dff9bc42 ] The function batadv_gw_node_add is responsible for adding new gw_node to the gateway_list. It is expecting that the caller already checked that there is not already an entry with the same key or not. But the lock for the list is only held when the list is really modified. This could lead to duplicated entries because another context could create an entry with the same key between the check and the list manipulation. The check and the manipulation of the list must therefore be in the same locked code section. Fixes: c6c8fea2 ("net: Add batman-adv meshing protocol") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit a25bab9d ] The per hardif sysfs file "batman_adv/elp_interval" is using the generic functions to store/show uint values. The helper __batadv_store_uint_attr requires the softif net_device as parameter to print the resulting change as info text when the users writes to this file. It uses the helper function batadv_info to add it at the same time to the kernel ring buffer and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG is enabled). The function batadv_info requires as first parameter the batman-adv softif net_device. This parameter is then used to find the private buffer which contains the debug log for this batman-adv interface. But batadv_store_throughput_override used as first argument the slave net_device. This slave device doesn't have the batadv_priv private data which is access by batadv_info. Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead to a segfault or to memory corruption. Fixes: 0744ff8f ("batman-adv: Add hard_iface specific sysfs wrapper macros for UINT") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit b9fd14c2 ] The per hardif sysfs file "batman_adv/throughput_override" prints the resulting change as info text when the users writes to this file. It uses the helper function batadv_info to add it at the same time to the kernel ring buffer and to the batman-adv debug log (when CONFIG_BATMAN_ADV_DEBUG is enabled). The function batadv_info requires as first parameter the batman-adv softif net_device. This parameter is then used to find the private buffer which contains the debug log for this batman-adv interface. But batadv_store_throughput_override used as first argument the slave net_device. This slave device doesn't have the batadv_priv private data which is access by batadv_info. Writing to this file with CONFIG_BATMAN_ADV_DEBUG enabled can either lead to a segfault or to memory corruption. Fixes: 0b5ecc68 ("batman-adv: add throughput override attribute to hard_ifaces") Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 88d0895d ] The probe ELPs for WiFi interfaces are expanded to contain at least BATADV_ELP_MIN_PROBE_SIZE bytes. This is usually a lot more than the number of bytes which the template ELP packet requires. These extra padding bytes were not initialized and thus could contain data which were previously stored at the same location. It is therefore required to set it to some predefined or random values to avoid leaking private information from the system transmitting these kind of packets. Fixes: e4623c913508 ("batman-adv: Avoid probe ELP information leak") Signed-off-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
-
Jozef Balga authored
[ Upstream commit 312f73b6 ] When less than 3 bytes are written to the device, memcpy is called with negative array size which leads to buffer overflow and kernel panic. This patch adds a condition and returns -EOPNOTSUPP instead. Fixes bugzilla issue 64871 [mchehab+samsung@kernel.org: fix a merge conflict and changed the condition to match the patch's comment, e. g. len == 3 could also be valid] Signed-off-by:
Jozef Balga <jozef.balga@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
- 18 Oct, 2018 9 commits
-
-
Greg Kroah-Hartman authored
-
Jiri Olsa authored
commit 77f18153 upstream. With gcc 8 we get new set of snprintf() warnings that breaks the compilation, one example: tests/mem.c: In function ‘check’: tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \ up to 99 bytes into a region of size 89 [-Werror=format-truncation=] snprintf(failure, sizeof failure, "unexpected %s", out); The gcc docs says: To avoid the warning either use a bigger buffer or handle the function's return value which indicates whether or not its output has been truncated. Given that all these warnings are harmless, because the code either properly fails due to uncomplete file path or we don't care for truncated output at all, I'm changing all those snprintf() calls to scnprintf(), which actually 'checks' for the snprint return value so the gcc stays silent. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Link: http://lkml.kernel.org/r/20180319082902.4518-1-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by:
-
Russell King authored
Commit a3c0f847 upstream. Spectre variant 1 attacks are about this sequence of pseudo-code: index = load(user-manipulated pointer); access(base + index * stride); In order for the cache side-channel to work, the access() must me made to memory which userspace can detect whether cache lines have been loaded. On 32-bit ARM, this must be either user accessible memory, or a kernel mapping of that same user accessible memory. The problem occurs when the load() speculatively loads privileged data, and the subsequent access() is made to user accessible memory. Any load() which makes use of a user-maniplated pointer is a potential problem if the data it has loaded is used in a subsequent access. This also applies for the access() if the data loaded by that access is used by a subsequent access. Harden the get_user() accessors against Spectre attacks by forcing out of bounds addresses to a NULL pointer. This prevents get_user() being used as the load() step above. As a side effect, put_user() will also be affected even though it isn't implicated. Also harden copy_from_user() by redoing the bounds check within the arm_copy_from_user() code, and NULLing the pointer if out of bounds. Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David A. Long <dave.long@linaro.org> Signed-off-by:
-
Russell King authored
Commit b1cd0a14 upstream. Fixing __get_user() for spectre variant 1 is not sane: we would have to add address space bounds checking in order to validate that the location should be accessed, and then zero the address if found to be invalid. Since __get_user() is supposed to avoid the bounds check, and this is exactly what get_user() does, there's no point having two different implementations that are doing the same thing. So, when the Spectre workarounds are required, make __get_user() an alias of get_user(). Acked-by:
-
Russell King authored
Commit d09fbb32 upstream. Borrow the x86 implementation of __inttype() to use in get_user() to select an integer type suitable to temporarily hold the result value. This is necessary to avoid propagating the volatile nature of the result argument, which can cause the following warning: lib/iov_iter.c:413:5: warning: optimization may eliminate reads and/or writes to register variables [-Wvolatile-register-var] Acked-by:
-
Russell King authored
Commit 8c8484a1 upstream. __get_user_error() is used as a fast accessor to make copying structure members as efficient as possible. However, with software PAN and the recent Spectre variant 1, the efficiency is reduced as these are no longer fast accessors. In the case of software PAN, it has to switch the domain register around each access, and with Spectre variant 1, it would have to repeat the access_ok() check for each access. Rather than using __get_user_error() to copy each semops element member, copy each semops element in full using __copy_from_user(). Acked-by:
-
Russell King authored
Commit 42019fc5 upstream. __get_user_error() is used as a fast accessor to make copying structure members in the signal handling path as efficient as possible. However, with software PAN and the recent Spectre variant 1, the efficiency is reduced as these are no longer fast accessors. In the case of software PAN, it has to switch the domain register around each access, and with Spectre variant 1, it would have to repeat the access_ok() check for each access. Use __copy_from_user() rather than __get_user_err() for individual members when restoring VFP state. Acked-by:
-
Russell King authored
Commit c32cd419 upstream. __get_user_error() is used as a fast accessor to make copying structure members in the signal handling path as efficient as possible. However, with software PAN and the recent Spectre variant 1, the efficiency is reduced as these are no longer fast accessors. In the case of software PAN, it has to switch the domain register around each access, and with Spectre variant 1, it would have to repeat the access_ok() check for each access. It becomes much more efficient to use __copy_from_user() instead, so let's use this for the ARM integer registers. Acked-by:
-
Russell King authored
Commit 10573ae5 upstream. Prevent speculation at the syscall table decoding by clamping the index used to zero on invalid system call numbers, and using the csdb speculative barrier. Signed-off-by:
-
