- 10 Oct, 2018 2 commits
-
-
Sunil Goutham authored
This patch adds basic template for Marvell OcteonTX2's resource virtualization unit (RVU) admin function (AF) driver. Just the driver registration and probe. Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
Currently driver registers to physical link notifications (of the device) from Management firmware (MFW). Driver doesn't get notified if there's a change in the virtual link e.g., link-flap on the peer PF interface. Virtual link indication from MFW reflects the per PF link status instead of the physical link. The patch adds driver support for, - Advertising the virtual link support to MFW. - Handling the virtual link notification from MFW. Please consider applying it to 'net-next'. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
-
- 09 Oct, 2018 4 commits
-
-
Ganesh Goudar authored
Add thermal zone support to monitor ASIC's temperature. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Alaa Hleihel authored
When memory is limited (on kdump kernel), reduce size of rx and tx rings. Also reduce the number of rx rings. Signed-off-by:
Alaa Hleihel <alaa@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-10-08 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) sk_lookup_[tcp|udp] and sk_release helpers from Joe Stringer which allow BPF programs to perform lookups for sockets in a network namespace. This would allow programs to determine early on in processing whether the stack is expecting to receive the packet, and perform some action (eg drop, forward somewhere) based on this information. 2) per-cpu cgroup local storage from Roman Gushchin. Per-cpu cgroup local storage is very similar to simple cgroup storage except all the data is per-cpu. The main goal of per-cpu variant is to implement super fast counters (e.g. packet counters), which don't require neither lookups, neither atomic operations in a fast path. The example of these hybrid counters is in selftests/bpf/netcnt_prog.c 3) allow HW offload of programs with BPF-to-BPF function calls from Quentin Monnet 4) support more than 64-byte key/value in HW offloaded BPF maps from Jakub Kicinski 5) rename of libbpf interfaces from Andrey Ignatov. libbpf is maturing as a library and should follow good practices in library design and implementation to play well with other libraries. This patch set brings consistent naming convention to global symbols. 6) relicense libbpf as LGPL-2.1 OR BSD-2-Clause from Alexei Starovoitov to let Apache2 projects use libbpf 7) various AF_XDP fixes from Björn and Magnus ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree: 1) Support for matching on ipsec policy already set in the route, from Florian Westphal. 2) Split set destruction into deactivate and destroy phase to make it fit better into the transaction infrastructure, also from Florian. This includes a patch to warn on imbalance when setting the new activate and deactivate interfaces. 3) Release transaction list from the workqueue to remove expensive synchronize_rcu() from configuration plane path. This speeds up configuration plane quite a bit. From Florian Westphal. 4) Add new xfrm/ipsec extension, this new extension allows you to match for ipsec tunnel keys such as source and destination address, spi and reqid. From Máté Eckl and Florian Westphal. 5) Add secmark support, this includes connsecmark too, patches from Christian Gottsche. 6) Allow to specify remaining bytes in xt_quota, from Chenbo Feng. One follow up patch to calm a clang warning for this one, from Nathan Chancellor. 7) Flush conntrack entries based on layer 3 family, from Kristian Evensen. 8) New revision for cgroups2 to shrink the path field. 9) Get rid of obsolete need_conntrack(), as a result from recent demodularization works. 10) Use WARN_ON instead of BUG_ON, from Florian Westphal. 11) Unused exported symbol in nf_nat_ipv4_fn(), from Florian. 12) Remove superfluous check for timeout netlink parser and dump functions in layer 4 conntrack helpers. 13) Unnecessary redundant rcu read side locks in NAT redirect, from Taehee Yoo. 14) Pass nf_hook_state structure to error handlers, patch from Florian Westphal. 15) Remove ->new() interface from layer 4 protocol trackers. Place them in the ->packet() interface. From Florian. 16) Place conntrack ->error() handling in the ->packet() interface. Patches from Florian Westphal. 17) Remove unused parameter in the pernet initialization path, also from Florian. 18) Remove additional parameter to specify layer 3 protocol when looking up for protocol tracker. From Florian. 19) Shrink array of layer 4 protocol trackers, from Florian. 20) Check for linear skb only once from the ALG NAT mangling codebase, from Taehee Yoo. 21) Use rhashtable_walk_enter() instead of deprecated rhashtable_walk_init(), also from Taehee. 22) No need to flush all conntracks when only one single address is gone, from Tan Hu. 23) Remove redundant check for NAT flags in flowtable code, from Taehee Yoo. 24) Use rhashtable_lookup() instead of rhashtable_lookup_fast() from netfilter codebase, since rcu read lock side is already assumed in this path. ==================== Signed-off-by:
-
- 08 Oct, 2018 34 commits
-
-
Arnd Bergmann authored
The newly added TCP and UDP handling fails to link when CONFIG_INET is disabled: net/core/filter.o: In function `sk_lookup': filter.c:(.text+0x7ff8): undefined reference to `tcp_hashinfo' filter.c:(.text+0x7ffc): undefined reference to `tcp_hashinfo' filter.c:(.text+0x8020): undefined reference to `__inet_lookup_established' filter.c:(.text+0x8058): undefined reference to `__inet_lookup_listener' filter.c:(.text+0x8068): undefined reference to `udp_table' filter.c:(.text+0x8070): undefined reference to `udp_table' filter.c:(.text+0x808c): undefined reference to `__udp4_lib_lookup' net/core/filter.o: In function `bpf_sk_release': filter.c:(.text+0x82e8): undefined reference to `sock_gen_put' Wrap the related sections of code in #ifdefs for the config option. Furthermore, sk_lookup() should always have been marked 'static', this also avoids a warning about a missing prototype when building with 'make W=1'. Fixes: 6acc9b43 ("bpf: Add helper to retrieve socket in BPF") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Joe Stringer <joe@wand.net.nz> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Nathan Chancellor authored
Clang warns: net/netfilter/xt_quota.c:47:44: warning: 'aligned' attribute ignored when parsing type [-Wignored-attributes] BUILD_BUG_ON(sizeof(atomic64_t) != sizeof(__aligned_u64)); ^~~~~~~~~~~~~ Use 'sizeof(__u64)' instead, as the alignment doesn't affect the size of the type. Fixes: e9837e55 ("netfilter: xt_quota: fix the behavior of xt_quota module") Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Ioana Ciocoi Radulescu authored
Until now, both Rx and Tx confirmation frames handled during NAPI poll were counted toward the NAPI budget. However, Tx confirmations are lighter to process than Rx frames, which can skew the amount of work actually done inside one NAPI cycle. Update the code to only count Rx frames toward the NAPI budget and set a separate threshold on how many Tx conf frames can be processed in one poll cycle. The NAPI poll routine stops when either the budget is consumed by Rx frames or when Tx confirmation frames reach this threshold. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/mscc/ocelot_board.c: In function 'mscc_ocelot_probe': drivers/net/ethernet/mscc/ocelot_board.c:262:17: warning: variable 'phy_mode' set but not used [-Wunused-but-set-variable] enum phy_mode phy_mode; It never used since introduction in commit 71e32a20 ("net: mscc: ocelot: make use of SerDes PHYs for handling their configuration") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
David S. Miller authored
Sabrina Dubroca says: ==================== selftests: add more PMTU tests The current selftests for PMTU cover VTI tunnels, but there's nothing about the generation and handling of PMTU exceptions by intermediate routers. This series adds and improves existing helpers, then adds IPv4 and IPv6 selftests with a setup involving an intermediate router. Joint work with Stefano Brivio. ==================== Signed-off-by: -
Sabrina Dubroca authored
Commit d1f1b9cb ("selftests: net: Introduce first PMTU test") and follow-ups introduced some PMTU tests, but they all rely on tunneling, and, particularly, on VTI. These new tests use simple routing to exercise the generation and update of PMTU exceptions in IPv4 and IPv6. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Sabrina Dubroca authored
The mtu_parse helper introduced in commit f2c929fe ("selftests: pmtu: Factor out MTU parsing helper") can only handle "mtu 1234", but not "mtu lock 1234". Extend it, so that we can do IPv4 tests with PMTU smaller than net.ipv4.route.min_pmtu Signed-off-by:
-
Stefano Brivio authored
Introduce and use a function that checks PMTU values against expected values and logs error messages, to remove some clutter. Signed-off-by:
-
Gustavo A. R. Silva authored
Notice that in this particular case, I replaced the "--v-- fall through --v--" comment with a proper "fall through", which is what GCC is expecting to find. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== rtnetlink: Add support for rigid checking of data in dump request There are many use cases where a user wants to influence what is returned in a dump for some rtnetlink command: one is wanting data for a different namespace than the one the request is received and another is limiting the amount of data returned in the dump to a specific set of interest to userspace, reducing the cpu overhead of both kernel and userspace. Unfortunately, the kernel has historically not been strict with checking for the proper header or checking the values passed in the header. This lenient implementation has allowed iproute2 and other packages to pass any struct or data in the dump request as long as the family is the first byte. For example, ifinfomsg struct is used by iproute2 for all generic dump requests - links, addresses, routes and rules when it is really only valid for link requests. There is 1 is example where the kernel deals with the wrong struct: link dumps after VF support was added. Older iproute2 was sending rtgenmsg as the header instead of ifinfomsg so a patch was added to try and detect old userspace vs new: e5eca6d4 ("rtnetlink: fix userspace API breakage for iproute2 < v3.9.0") The latest example is Christian's patch set wanting to return addresses for a target namespace. It guesses the header struct is an ifaddrmsg and if it guesses wrong a netlink warning is generated in the kernel log on every address dump which is unacceptable. Another example where the kernel is a bit lenient is route dumps: iproute2 can send either a request with either ifinfomsg or a rtmsg as the header struct, yet the kernel always treats the header as an rtmsg (see inet_dump_fib and rtm_flags check). The header inconsistency impacts the ability to add kernel side filters for route dumps - a necessary feature for scale setups with 100k+ routes. How to resolve the problem of not breaking old userspace yet be able to move forward with new features such as kernel side filtering which are crucial for efficient operation at high scale? This patch set addresses the problem by adding a new socket flag, NETLINK_DUMP_STRICT_CHK, that userspace can use with setsockopt to request strict checking of headers and attributes on dump requests and hence unlock the ability to use kernel side filters as they are added. Kernel side, the dump handlers are updated to verify the message contains at least the expected header struct: RTM_GETLINK: ifinfomsg RTM_GETADDR: ifaddrmsg RTM_GETMULTICAST: ifaddrmsg RTM_GETANYCAST: ifaddrmsg RTM_GETADDRLABEL: ifaddrlblmsg RTM_GETROUTE: rtmsg RTM_GETSTATS: if_stats_msg RTM_GETNEIGH: ndmsg RTM_GETNEIGHTBL: ndtmsg RTM_GETNSID: rtgenmsg RTM_GETRULE: fib_rule_hdr RTM_GETNETCONF: netconfmsg RTM_GETMDB: br_port_msg And then every field in the header struct should be 0 with the exception of the family. There are a few exceptions to this rule where the kernel already influences the data returned by values in the struct. Next the message should not contain attributes unless the kernel implements filtering for it. Any unexpected data causes the dump to fail with EINVAL. If the new flag is honored by the kernel and the dump contents adjusted by any data passed in the request, the dump handler can set the NLM_F_DUMP_FILTERED flag in the netlink message header. For old userspace on new kernel there is no impact as all checks are wrapped in a check on the new strict flag. For new userspace on old kernel, the data in the headers and any appended attributes are silently ignored though the setsockopt failing is the clue to userspace the feature is not supported. New userspace on new kernel gets the requested data dump. iproute2 patches can be found here: https://github.com/dsahern/iproute2 dump-enhancements Major changes since v1 - inner header is supposed to be 4-bytes aligned. So for dumps that should not have attributes appended changed the check to use: if (nlmsg_attrlen(nlh, sizeof(hdr))) Only impacts patches with headers that are not multiples of 4-bytes (rtgenmsg, netconfmsg), but applied the change to all patches not calling nlmsg_parse for consistency. - Added nlmsg_parse_strict and nla_parse_strict for tighter control on attribute parsing. There should be no unknown attribute types or extra bytes. - Moved validation to a helper in most cases Changes since rfc-v2 - dropped the NLM_F_DUMP_FILTERED flag from target nsid dumps per Jiri's objections - changed the opt-in uapi from a netlink message flag to a socket flag. setsockopt provides an api for userspace to definitively know if the kernel supports strict checking on dumps. - re-ordered patches to peel off the extack on dumps if needed to keep this set size within limits - misc cleanups in patches based on testing ==================== Acked-by:
Christian Brauner <christian@brauner.io> Signed-off-by:
-
David Ahern authored
Update rtnl_fdb_dump for strict data checking. If the flag is set, the dump request is expected to have an ndmsg struct as the header potentially followed by one or more attributes. Any data passed in the header or as an attribute is taken as a request to influence the data returned. Only values supported by the dump handler are allowed to be non-0 or set in the request. At the moment only the NDA_IFINDEX and NDA_MASTER attributes are supported. Signed-off-by:
-
David Ahern authored
Move the existing input checking for rtnl_fdb_dump into a helper, valid_fdb_dump_legacy. This function will retain the current logic that works around the 2 headers that userspace has been allowed to send up to this point. Signed-off-by:
-
David Ahern authored
Update br_mdb_dump for strict data checking. If the flag is set, the dump request is expected to have a br_port_msg struct as the header. All elements of the struct are expected to be 0 and no attributes can be appended. Signed-off-by:
-
David Ahern authored
Update inet_netconf_dump_devconf, inet6_netconf_dump_devconf, and mpls_netconf_dump_devconf for strict data checking. If the flag is set, the dump request is expected to have an netconfmsg struct as the header. The struct only has the family member and no attributes can be appended. Signed-off-by:
-
David Ahern authored
Update ip6addrlbl_dump for strict data checking. If the flag is set, the dump request is expected to have an ifaddrlblmsg struct as the header. All elements of the struct are expected to be 0 and no attributes can be appended. Signed-off-by:
-
David Ahern authored
Update fib_nl_dumprule for strict data checking. If the flag is set, the dump request is expected to have fib_rule_hdr struct as the header. All elements of the struct are expected to be 0 and no attributes can be appended. Signed-off-by:
-
David Ahern authored
Update rtnl_net_dumpid for strict data checking. If the flag is set, the dump request is expected to have an rtgenmsg struct as the header which has the family as the only element. No data may be appended. Signed-off-by:
-
David Ahern authored
Update neightbl_dump_info for strict data checking. If the flag is set, the dump request is expected to have an ndtmsg struct as the header. All elements of the struct are expected to be 0 and no attributes can be appended. Signed-off-by:
-
David Ahern authored
Update neigh_dump_info for strict data checking. If the flag is set, the dump request is expected to have an ndmsg struct as the header potentially followed by one or more attributes. Any data passed in the header or as an attribute is taken as a request to influence the data returned. Only values supported by the dump handler are allowed to be non-0 or set in the request. At the moment only the NDA_IFINDEX and NDA_MASTER attributes are supported. Existing code does not fail the dump if nlmsg_parse fails. That behavior is kept for non-strict checking. Signed-off-by:
-
David Ahern authored
Add helper to check netlink message for route dumps. If the strict flag is set the dump request is expected to have an rtmsg struct as the header. All elements of the struct are expected to be 0 with the exception of rtm_flags (which is used by both ipv4 and ipv6 dumps) and no attributes can be appended. rtm_flags can only have RTM_F_CLONED and RTM_F_PREFIX set. Update inet_dump_fib, inet6_dump_fib, mpls_dump_routes, ipmr_rtm_dumproute, and ip6mr_rtm_dumproute to call this helper if strict data checking is enabled. Signed-off-by:
-
David Ahern authored
Update ipmr_rtm_dumplink for strict data checking. If the flag is set, the dump request is expected to have an ifinfomsg struct as the header. All elements of the struct are expected to be 0 and no attributes can be appended. Signed-off-by:
-
David Ahern authored
Update inet6_dump_ifinfo for strict data checking. If the flag is set, the dump request is expected to have an ifinfomsg struct as the header. All elements of the struct are expected to be 0 and no attributes can be appended. Signed-off-by:
-
David Ahern authored
Update rtnl_stats_dump for strict data checking. If the flag is set, the dump request is expected to have an if_stats_msg struct as the header. All elements of the struct are expected to be 0 except filter_mask which must be non-0 (legacy behavior). No attributes are supported. Signed-off-by:
-
David Ahern authored
Update rtnl_bridge_getlink for strict data checking. If the flag is set, the dump request is expected to have an ifinfomsg struct as the header potentially followed by one or more attributes. Any data passed in the header or as an attribute is taken as a request to influence the data returned. Only values supported by the dump handler are allowed to be non-0 or set in the request. At the moment only the IFLA_EXT_MASK attribute is supported. Signed-off-by:
-
David Ahern authored
Update rtnl_dump_ifinfo for strict data checking. If the flag is set, the dump request is expected to have an ifinfomsg struct as the header potentially followed by one or more attributes. Any data passed in the header or as an attribute is taken as a request to influence the data returned. Only values supported by the dump handler are allowed to be non-0 or set in the request. At the moment only the IFA_TARGET_NETNSID, IFLA_EXT_MASK, IFLA_MASTER, and IFLA_LINKINFO attributes are supported. Existing code does not fail the dump if nlmsg_parse fails. That behavior is kept for non-strict checking. Signed-off-by:
-
David Ahern authored
Update inet6_dump_addr for strict data checking. If the flag is set, the dump request is expected to have an ifaddrmsg struct as the header potentially followed by one or more attributes. Any data passed in the header or as an attribute is taken as a request to influence the data returned. Only values suppored by the dump handler are allowed to be non-0 or set in the request. At the moment only the IFA_TARGET_NETNSID attribute is supported. Follow on patches can add support for other fields (e.g., honor ifa_index and only return data for the given device index). Signed-off-by:
-
David Ahern authored
Update inet_dump_ifaddr for strict data checking. If the flag is set, the dump request is expected to have an ifaddrmsg struct as the header potentially followed by one or more attributes. Any data passed in the header or as an attribute is taken as a request to influence the data returned. Only values supported by the dump handler are allowed to be non-0 or set in the request. At the moment only the IFA_TARGET_NETNSID attribute is supported. Follow on patches can support for other fields (e.g., honor ifa_index and only return data for the given device index). Signed-off-by:
-
David Ahern authored
Add a new socket option, NETLINK_DUMP_STRICT_CHK, that userspace can use via setsockopt to request strict checking of headers and attributes on dump requests. To get dump features such as kernel side filtering based on data in the header or attributes appended to the dump request, userspace must call setsockopt() for NETLINK_DUMP_STRICT_CHK and a non-zero value. Since the netlink sock and its flags are private to the af_netlink code, the strict checking flag is passed to dump handlers via a flag in the netlink_callback struct. For old userspace on new kernel there is no impact as all of the data checks in later patches are wrapped in a check on the new strict flag. For new userspace on old kernel, the setsockopt will fail and even if new userspace sets data in the headers and appended attributes the kernel will silently ignore it. Moving forward when the setsockopt succeeds, the new userspace on old kernel means the dump request can pass an attribute the kernel does not understand. The dump will then fail as the older kernel does not understand it. New userspace on new kernel setting the socket option gets the benefit of the improved data dump. Kernel side the NETLINK_DUMP_STRICT_CHK uapi is converted to a generic NETLINK_F_STRICT_CHK flag which can potentially be leveraged for tighter checking on the NEW, DEL, and SET commands. Signed-off-by:
-
David Ahern authored
Pull the inet6_fill_args arg up to in6_dump_addrs and move netnsid into it. Signed-off-by:
-
David Ahern authored
nla_parse is currently lenient on message parsing, allowing type to be 0 or greater than max expected and only logging a message "netlink: %d bytes leftover after parsing attributes in process `%s'." if the netlink message has unknown data at the end after parsing. What this could mean is that the header at the front of the attributes is actually wrong and the parsing is shifted from what is expected. Add a new strict version that actually fails with EINVAL if there are any bytes remaining after the parsing loop completes, if the atttrbitue type is 0 or greater than max expected. Signed-off-by: -
David Ahern authored
Make sure extack is passed to nlmsg_parse where easy to do so. Most of these are dump handlers and leveraging the extack in the netlink_callback. Signed-off-by:
-
David Ahern authored
Give a user a reason why EINVAL is returned in nlmsg_parse. Signed-off-by:
-
David Ahern authored
Declare extack in netlink_dump and pass to dump handlers via netlink_callback. Add any extack message after the dump_done_errno allowing error messages to be returned. This will be useful when strict checking is done on dump requests, returning why the dump fails EINVAL. Signed-off-by:
-
Gustavo A. R. Silva authored
Replace "--v-- fall through --v--" with a proper "fall through" annotation. Also, change "bad cid: fall through" to "fall through - bad cid". This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by:
-
