Implement the two easy cases of ib_rereg_user_mr.

Link: https://lore.kernel.org/r/20230530221334.89432-7-rpearsonhpe@gmail.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

In order to conform to other drivers stop using rkey == 0 as an indication
that there are no remote access flags set.  Set rkey == lkey by default
for all MRs.

Link: https://lore.kernel.org/r/20230530221334.89432-6-rpearsonhpe@gmail.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Introduce supported bit masks for setting the access attributes of MWs,
MRs, and QPs. Check these when attributes are set.

Link: https://lore.kernel.org/r/20230530221334.89432-5-rpearsonhpe@gmail.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The subroutine rxe_check_bind_mw() in rxe_mw.c performs checks on the mw
access flags before they are set so they always succeed.  This patch
instead checks the access flags passed in the send wqe.

Fixes: 32a577b4 ("RDMA/rxe: Add support for bind MW work requests")
Link: https://lore.kernel.org/r/20230530221334.89432-4-rpearsonhpe@gmail.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Bypass calling check_rkey() in rxe_resp.c for non-rdma messages.

Link: https://lore.kernel.org/r/20230530221334.89432-3-rpearsonhpe@gmail.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Rename IB_ACCESS_REMOTE to RXE_ACCESS_REMOTE and move to rxe_verbs.h as an
enum instead of a #define. Shouldn't use IB_xxx for rxe symbols.

Link: https://lore.kernel.org/r/20230530221334.89432-2-rpearsonhpe@gmail.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Log return value of clear_hem() to help diagnose.

Link: https://lore.kernel.org/r/20230523121641.3132102-4-huangjunxian6@hisilicon.comSigned-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The return value of set_hem has been fixed to ENODEV, which will lead a
diagnostic information missing.

Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20230523121641.3132102-3-huangjunxian6@hisilicon.comSigned-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

It is not necessary to check the type of the queue on IO path because
unsupported QP type cannot be created.

Link: https://lore.kernel.org/r/20230523121641.3132102-2-huangjunxian6@hisilicon.comSigned-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The struct mmu_rb_ops function pointers .insert, .invalidate were only
used to increment and decrement struct sdma_mmu_node.refcount.

With the deletion of struct sdma_mmu_node.refcount and the addition of
struct mmu_rb_node.refcount  these function pointers are not called and
there are no implementations of them. So it is safe to delete these from
struct mmu_rb_ops.

Link: https://lore.kernel.org/r/168451526508.3702129.8677714753157495310.stgit@awfm-02.cornelisnetworks.comSigned-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Add kref_read() of mmu_rb_node.refcount in hfi1_mmu_rb_template-type
tracepoint output.

Change hfi1_mmu_rb_template tracepoint to take a struct mmu_rb_node* and
record the values it needs from that. This makes the trace_hfi1_mmu*()
calls shorter and easier to read.

Add hfi1_mmu_release_node() tracepoint before all
mmu_rb_node->handler->ops->remove() calls.

Make hfi1_mmu_rb_search() tracepoint its own tracepoint type separate
from hfi1_mmu_rb_template since hfi1_mmu_rb_search() does not take a
struct mmu_rb_node*.

Link: https://lore.kernel.org/r/168451525987.3702129.12824880387615916700.stgit@awfm-02.cornelisnetworks.comReviewed-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The hfi1 user SDMA pinned-page cache will leave a stale cache entry when
the cache-entry's virtual address range is invalidated but that cache
entry is in-use by an outstanding SDMA request.

Subsequent user SDMA requests with buffers in or spanning the virtual
address range of the stale cache entry will result in packets constructed
from the wrong memory, the physical pages pointed to by the stale cache
entry.

To fix this, remove mmu_rb_node cache entries from the mmu_rb_handler
cache independent of the cache entry's refcount. Add 'struct kref
refcount' to struct mmu_rb_node and manage mmu_rb_node lifetime with
kref_get() and kref_put().

mmu_rb_node.refcount makes sdma_mmu_node.refcount redundant. Remove
'atomic_t refcount' from struct sdma_mmu_node and change sdma_mmu_node
code to use mmu_rb_node.refcount.

Move the mmu_rb_handler destructor call after a
wait-for-SDMA-request-completion call so mmu_rb_nodes that need
mmu_rb_handler's workqueue to queue themselves up for destruction from an
interrupt context may do so.

Fixes: f48ad614 ("IB/hfi1: Move driver out of staging")
Fixes: 00cbce5c ("IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests")
Link: https://lore.kernel.org/r/168451393605.3700681.13493776139032178861.stgit@awfm-02.cornelisnetworks.comReviewed-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

line 1701 and 1713 are duplicate:
> 1701         cq_num = max_send_wr + max_recv_wr;
  1702         /* alloc iu to recv new rkey reply when server reports flags set */
  1703         if (clt_path->flags & RTRS_MSG_NEW_RKEY_F || con->c.cid == 0) {
  1704                 con->rsp_ius = rtrs_iu_alloc(cq_num, sizeof(*rsp),
  1705                                               GFP_KERNEL,
  1706                                               clt_path->s.dev->ib_dev,
  1707                                               DMA_FROM_DEVICE,
  1708                                               rtrs_clt_rdma_done);
  1709                 if (!con->rsp_ius)
  1710                         return -ENOMEM;
  1711                 con->queue_num = cq_num;
  1712         }
> 1713         cq_num = max_send_wr + max_recv_wr;

Remove the duplicate.

Link: https://lore.kernel.org/r/1682384563-2-2-git-send-email-lizhijian@fujitsu.comAcked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

rxe_cq_disable() has been removed but not its declaration.

Fixes: 78b26a33 ("RDMA/rxe: Remove tasklet call from rxe_cq.c")
Link: https://lore.kernel.org/r/4f20ffc5-b2c4-0c11-2883-a835caf01a94@suse.comSigned-off-by: Nicolas Morey <nmorey@suse.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Commit df8fc4e9 ("kbuild: Enable -fstrict-flex-arrays=3") triggers a
warning for fortified memset():

In function 'fortify_memset_chk',
    inlined from 'irdma_clr_wqes' at drivers/infiniband/hw/irdma/uk.c:103:4:
include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  493 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The problem here isthat the inner array only has four 8-byte elements, so
clearing 4096 bytes overflows that. As this structure is part of an outer
array, change the code to pass a pointer to the irdma_qp_quanta instead,
and change the size argument for readability, matching the comment above
it.

Fixes: 551c46ed ("RDMA/irdma: Add user/kernel shared libraries")
Link: https://lore.kernel.org/r/20230523111859.2197825-1-arnd@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

With RX coalescing, one CQE entry can be used to indicate multiple packets
on the receive queue. This saves processing time and PCI bandwidth over
the CQ.

The MANA Ethernet driver also uses the v2 version of the protocol. It
doesn't use RX coalescing and its behavior is not changed.

Link: https://lore.kernel.org/r/1684045095-31228-1-git-send-email-longli@linuxonhyperv.comSigned-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The NULL check inside bnxt_qplib_del_sgid() and bnxt_qplib_add_sgid()
always return false as the "sgid_tbl" inside "rdev->qplib_res" is a static
memory.

Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684478897-12247-8-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

When there is no cleanup to be done, return directly.  This will help
eliminating unnecessary local variables and goto labels.  This patch fixes
such occurrences in qplib_fp.c file.

Fixes: 37cb11ac ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Fixes: 159fb4ce ("RDMA/bnxt_re: introduce a function to allocate swq")
Link: https://lore.kernel.org/r/1684478897-12247-7-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

During destroy_qp, driver sets the qp handle in the existing CQEs
belonging to the QP being destroyed to NULL. As a result, a poll_cq after
destroy_qp can report unnecessary messages.  Remove this noise from system
logs.

Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684478897-12247-6-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The NULL check inside bnxt_re_update_gid() always return false.  If
sgid_tbl->tbl is not allocated, then dev_init would have failed.

Fixes: 5fac5b1b ("RDMA/bnxt_re: Add vlan tag for untagged RoCE traffic when PFC is configured")
Link: https://lore.kernel.org/r/1684478897-12247-5-git-send-email-selvin.xavier@broadcom.comReviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

bnxt_re currently uses the names "bnxt_qplib_creq" and "bnxt_qplib_nq-0"
while registering IRQs. There is no way to distinguish the IRQs of
different device ports when there are multiple IB devices registered.
This could make the scenarios worse where one want to pin IRQs of a device
port to certain CPUs.

Fixed the code to use unique names which has PCI BDF information while
registering interrupts like: "bnxt_re-nq-0@pci:0000:65:00.0" and
"bnxt_re-creq@pci:0000:65:00.1".

Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684478897-12247-4-git-send-email-selvin.xavier@broadcom.comReviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

If there is no cleanup needed then just return directly.  This cleans up
the code and improve readability.

Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684478897-12247-3-git-send-email-selvin.xavier@broadcom.comReviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

When the ulp hook to start the IRQ fails because the rings are not
available, tasklets are not enabled. In this case when the driver is
unloaded, driver calls CREQ tasklet_kill. This causes an indefinite hang
as the tasklet is not enabled.

Driver shouldn't call tasklet_kill if it is not enabled. So using the
creq->requested and nq->requested flags to identify if both tasklets/irqs
are registered. Checking this flag while scheduling the tasklet from
ISR. Also, added a cleanup for disabling tasklet, in case request_irq
fails during start_irq.

Check for return value for bnxt_qplib_rcfw_start_irq and in case the
bnxt_qplib_rcfw_start_irq fails, return bnxt_re_start_irq without
attempting to start NQ IRQs.

Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684478897-12247-2-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The commit 9b4b7c1f ("RDMA/rxe: Add workqueue support for rxe tasks")
removed tasklets and replaced them with a workqueue, but relevant comments
are still remaining in the source code.

Fixes: 9b4b7c1f ("RDMA/rxe: Add workqueue support for rxe tasks")
Link: https://lore.kernel.org/r/20230518070027.942715-1-matsuda-daisuke@fujitsu.comSigned-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Move the initialization of the iw device ops to be under the declaration
of the irdma_iw_dev_ops.

Link: https://lore.kernel.org/r/20230515191142.413633-4-kheib@redhat.comSigned-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The return value from irdma_init_rdma_device() is always 0 - change it to
be void.

Link: https://lore.kernel.org/r/20230515191142.413633-3-kheib@redhat.comSigned-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The return value from irdma_init_iw_device() is always 0 - change it to be
void.

Link: https://lore.kernel.org/r/20230515191142.413633-2-kheib@redhat.comSigned-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Replace tasklets by work queues for the three main rxe tasklets:
rxe_requester, rxe_completer and rxe_responder.

work queues are a more modern way to process work from an IRQ and provide
more control over how that work is run for future patches.

Link: https://lore.kernel.org/r/20230428171321.5774-1-rpearsonhpe@gmail.comSigned-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Tested-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Pull compute express link fixes from Dan Williams:

 - Fix a compilation issue with DEFINE_STATIC_SRCU() in the unit tests

 - Fix leaking kernel memory to a root-only sysfs attribute

* tag 'cxl-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl: Add missing return to cdat read error path
  tools/testing/cxl: Use DEFINE_STATIC_SRCU()

Pull parisc architecture fixes from Helge Deller:

 - Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag

 - Include reboot.h to avoid gcc-12 compiler warning

* tag 'parisc-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
  parisc: kexec: include reboot.h

Pull ARM fixes from Russell King:

 - fix unwinder for uleb128 case

 - fix kernel-doc warnings for HP Jornada 7xx

 - fix unbalanced stack on vfp success path

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9297/1: vfp: avoid unbalanced stack on 'success' return path
  ARM: 9296/1: HP Jornada 7XX: fix kernel-doc warnings
  ARM: 9295/1: unwind:fix unwind abort for uleb128 case

Pull locking fix from Borislav Petkov:

 - Make sure __down_read_common() is always inlined so that the callers'
   names land in traceevents output and thus the blocked function can be
   identified

* tag 'locking_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Add __always_inline annotation to __down_read_common() and inlined callers

Pull perf fixes from Borislav Petkov:

 - Make sure the PEBS buffer is flushed before reprogramming the
   hardware so that the correct record sizes are used

 - Update the sample size for AMD BRS events

 - Fix a confusion with using the same on-stack struct with different
   events in the event processing path

* tag 'perf_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG
  perf/x86: Fix missing sample size update on AMD BRS
  perf/core: Fix perf_sample_data not properly initialized for different swevents in perf_tp_event()

Pull scheduler fix from Borislav Petkov:

 - Fix a couple of kernel-doc warnings

* tag 'sched_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: fix cid_lock kernel-doc warnings

Pull x86 fix from Borislav Petkov:

 - Add the required PCI IDs so that the generic SMN accesses provided by
   amd_nb.c work for drivers which switch to them. Add a PCI device ID
   to k10temp's table so that latter is loaded on such systems too

* tag 'x86_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hwmon: (k10temp) Add PCI ID for family 19, model 78h
  x86/amd_nb: Add PCI ID for family 19h model 78h

Pull timer fix from Borislav Petkov:

 - Prevent CPU state corruption when an active clockevent broadcast
   device is replaced while the system is already in oneshot mode

* tag 'timers_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/broadcast: Make broadcast device replacement work correctly

Pull ext4 fixes from Ted Ts'o:
 "Some ext4 bug fixes (mostly to address Syzbot reports)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: bail out of ext4_xattr_ibody_get() fails for any reason
  ext4: add bounds checking in get_max_inline_xattr_value_size()
  ext4: add indication of ro vs r/w mounts in the mount message
  ext4: fix deadlock when converting an inline directory in nojournal mode
  ext4: improve error recovery code paths in __ext4_remount()
  ext4: improve error handling from ext4_dirhash()
  ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled
  ext4: check iomap type only if ext4_iomap_begin() does not fail
  ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum
  ext4: fix data races when using cached status extents
  ext4: avoid deadlock in fs reclaim with page writeback
  ext4: fix invalid free tracking in ext4_xattr_move_to_block()
  ext4: remove a BUG_ON in ext4_mb_release_group_pa()
  ext4: allow ext4_get_group_info() to fail
  ext4: fix lockdep warning when enabling MMP
  ext4: fix WARNING in mb_find_extent

Pull fbdev fixes from Helge Deller:

 - use after free fix in imsttfb (Zheng Wang)

 - fix error handling in arcfb (Zongjie Li)

 - lots of whitespace cleanups (Thomas Zimmermann)

 - add 1920x1080 modedb entry (me)

* tag 'fbdev-for-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: stifb: Fix info entry in sti_struct on error path
  fbdev: modedb: Add 1920x1080 at 60 Hz video mode
  fbdev: imsttfb: Fix use after free bug in imsttfb_probe
  fbdev: vfb: Remove trailing whitespaces
  fbdev: valkyriefb: Remove trailing whitespaces
  fbdev: stifb: Remove trailing whitespaces
  fbdev: sa1100fb: Remove trailing whitespaces
  fbdev: platinumfb: Remove trailing whitespaces
  fbdev: p9100: Remove trailing whitespaces
  fbdev: maxinefb: Remove trailing whitespaces
  fbdev: macfb: Remove trailing whitespaces
  fbdev: hpfb: Remove trailing whitespaces
  fbdev: hgafb: Remove trailing whitespaces
  fbdev: g364fb: Remove trailing whitespaces
  fbdev: controlfb: Remove trailing whitespaces
  fbdev: cg14: Remove trailing whitespaces
  fbdev: atmel_lcdfb: Remove trailing whitespaces
  fbdev: 68328fb: Remove trailing whitespaces
  fbdev: arcfb: Fix error handling in arcfb_probe()

Pull SCSI fix from James Bottomley:
 "A single small fix for the UFS driver to fix a power management
  failure"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Fix I/O hang that occurs when BKOPS fails in W-LUN suspend