- 27 Aug, 2022 7 commits
-
-
Andrey Zhadchenko authored
CRIU is preserving ifindexes of net devices after restoration. However, current Open vSwitch API does not allow to target ifindex, so we cannot correctly restore OVS configuration. Add new OVS_DP_ATTR_IFINDEX for OVS_DP_CMD_NEW and use it as desired ifindex. Use OVS_VPORT_ATTR_IFINDEX during OVS_VPORT_CMD_NEW to specify new netdev ifindex. Signed-off-by:
Andrey Zhadchenko <andrey.zhadchenko@virtuozzo.com> Acked-by:
Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sergei Antonov authored
This driver always generated a random ethernet address. Leave it as a fallback solution, but add a call to platform_get_ethdev_address(). Handle EPROBE_DEFER returned from platform_get_ethdev_address() to retry when EEPROM is ready. Signed-off-by:
Sergei Antonov <saproj@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220824151724.2698107-1-saproj@gmail.comSigned-off-by:
-
Marcus Carlberg authored
p0_mode set to one of the supported serial mode should not prevent configuring the external SMI interface in mv88e6xxx_g2_scratch_gpio_set_smi. The current masking of the p0_mode only checks the first 2 bits. This results in switches supporting serial mode cannot setup external SMI on certain serial modes (Ex: 1000BASE-X and SGMII). Extend the mask of the p0_mode to include the reduced modes and serial modes as allowed modes for the external SMI interface. Signed-off-by:
Marcus Carlberg <marcus.carlberg@axis.com> Link: https://lore.kernel.org/r/20220824093706.19049-1-marcus.carlberg@axis.comSigned-off-by:
-
Jiri Pirko authored
In genl_bind(), currently genl_lock and write cb_lock are taken for iteration of genl_fam_idr and processing of static values stored in struct genl_family. Take just read cb_lock for this task as it is sufficient to guard the idr and the struct against concurrent genl_register/unregister_family() calls. This will allow to run genl command processing in genl_rcv() and mnl_socket_setsockopt(.., NETLINK_ADD_MEMBERSHIP, ..) in parallel. Reported-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220825081940.1283335-1-jiri@resnulli.usSigned-off-by:
-
Jack Wang authored
dma_map_sg return 0 on error. Signed-off-by:
Jack Wang <jinpu.wang@ionos.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20220825063533.21015-1-jinpu.wang@ionos.comSigned-off-by:
-
Jiri Pirko authored
Similar to devlink_compat_phys_port_name_get(), make sure that devlink_compat_switch_id_get() is called with RTNL lock held. Comment already says so, so put this in code as well. Signed-off-by:
-
Jiri Pirko authored
Whenever the type_set() is called on a devlink port, accompany it by matching type_clear() during cleanup. Signed-off-by:
-
- 26 Aug, 2022 18 commits
-
-
Marcus Carlberg authored
Since the probe defaults all interfaces to the highest speed possible (10GBASE-X in mv88e6393x) before the phy mode configuration from the devicetree is considered it is currently impossible to use port 0 in RGMII mode. This change will allow RGMII modes to be configurable for port 0 enabling port 0 to be configured as RGMII as well as serial depending on configuration. Signed-off-by:
-
Zhengchao Shao authored
The memory allocated by using kzallloc_node and kcalloc has been cleared. Therefore, the structure members of the new qdisc are 0. So there's no need to explicitly assign a value of 0. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-next-2022-08-26-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes berg says: ==================== Various updates: * rtw88: operation, locking, warning, and code style fixes * rtw89: small updates * cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work * brcmfmac: a couple of fixes * misc cleanups etc. ==================== Signed-off-by:
-
Jean-Francois Le Fillatre authored
The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as a broken CDC device by default. Add the custom Lenovo PID to the r8152 driver to support it properly. Also, systems compatible with this dock provide a BIOS option to enable MAC address passthrough (as per Lenovo document "ThinkPad Docking Solutions 2017"). Add the custom PID to the MAC passthrough list too. Tested on a ThinkPad 13 1st gen with the expected results: passthrough disabled: Invalid header when reading pass-thru MAC addr passthrough enabled: Using pass-thru MAC addr XX:XX:XX:XX:XX:XX Signed-off-by:
Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-24 (ice) This series contains updates to ice driver only. Marcin adds support for TC parsing on TTL and ToS fields. Anatolli adds support for devlink port split command to allow configuration of various port configurations. Jake allows for passing and writing an additional NVM write activate field by expanding current cmd_flag. Ani makes PHY debug output more readable. ==================== Signed-off-by: -
Ping-Ke Shih authored
clang reports uninitialized use: >> drivers/net/wireless/realtek/rtw88/main.c:731:2: warning: variable 'primary_channel_idx' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ drivers/net/wireless/realtek/rtw88/main.c:754:39: note: uninitialized use occurs here hal->current_primary_channel_index = primary_channel_idx; ^~~~~~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw88/main.c:687:24: note: initialize the variable 'primary_channel_idx' to silence this warning u8 primary_channel_idx; ^ = '\0' This situation could not happen, because possible channel bandwidth 20/40/80MHz are enumerated. Fixes: 341dd1f7 ("wifi: rtw88: add the update channel flow to support setting by parameters") Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20220815062004.22920-1-pkshih@realtek.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Qingfang DENG authored
As per RGMII specification v2.0, section 3.4.1, RGMII/RTBI has an optional in-band status feature where the PHY's link status, speed and duplex mode can be passed to the MAC. Allow RGMII/RTBI to use in-band status. Signed-off-by:
Qingfang DENG <dqfext@gmail.com> Signed-off-by:
-
David S. Miller authored
Maksym Glubokiy says: ==================== net: prestera: matchall features This patch series extracts matchall rules management out of SPAN API implementation and adds 2 features on top of that: - support for egress traffic (mirred egress action) - proper rule priorities management between matchall and flower ==================== Signed-off-by: -
Maksym Glubokiy authored
matchall rules can be added only to chain 0 and their priorities have limitations: - new matchall ingress rule's priority must be higher (lower value) than any existing flower rule; - new matchall egress rule's priority must be lower (higher value) than any existing flower rule. The opposite works for flower rule adding: - new flower ingress rule's priority must be lower (higher value) than any existing matchall rule; - new flower egress rule's priority must be higher (lower value) than any existing matchall rule. This is a hardware limitation and thus must be properly handled in driver by reporting errors to the user when newly added rule has such a priority that cannot be installed into the hardware. To achieve this, the driver must maintain both min/max matchall priorities for every flower block when user adds/deletes a matchall rule, as well as both min/max flower priorities for chain 0 for every adding/deletion of flower rules for chain 0. Cc: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by:
Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by:
-
Serhiy Boiko authored
This enables adding matchall rules for egress: tc filter add .. egress .. matchall skip_sw \ action mirred egress mirror dev .. Signed-off-by:Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by:
-
Serhiy Boiko authored
This commit adds more clarity to handling of TC_CLSMATCHALL_REPLACE and TC_CLSMATCHALL_DESTROY events by calling newly added *_mall_*() handlers instead of directly calling SPAN API. This also extracts matchall rules management out of SPAN API since SPAN is a hardware module which is used to implement 'matchall egress mirred' action only. Signed-off-by:
Taras Chornyi <tchornyi@marvell.com> Signed-off-by:
-
Oleksij Rempel authored
Add phylink based ethtool pause configuration Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
-
Oleksij Rempel authored
There are some exotic ax88772 based devices which may require functionality provide by the phylink framework. For example: - US100A20SFP, USB 2.0 auf LWL Converter with SFP Cage - AX88772B USB to 100Base-TX Ethernet (with RMII) demo board, where it is possible to switch between internal PHY and external RMII based connection. So, convert this driver to phylink as soon as possible. Tested with: - AX88772A + internal PHY - AX88772B + external DP83TD510E T1L PHY Signed-off-by:
-
Xin Gao authored
The full 'unsigned int' is better than 'unsigned'. Signed-off-by:
Xin Gao <gaoxin@cdjrlc.com> Link: https://lore.kernel.org/r/20220816181040.9044-1-gaoxin@cdjrlc.com [fix indentation] Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Ryder Lee authored
Driver may update sinfo directly through .sta_statistics, so this patch makes sure that ethool gets the correct statistics. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/f9edff14dd7f5205acf1c21bae8e9d8f9802dd88.1661466499.git.ryder.lee@mediatek.comSigned-off-by:
-
Johannes Berg authored
If we add 6 GHz capability in MLO, we cannot use the SMPS mode from the deflink. Pass it separately instead since on a second link we don't even have a link data struct yet. Signed-off-by: -
Rob Herring authored
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically). Add missing properties/$refs as exposed by this addition. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220825192609.1538463-1-robh@kernel.orgSigned-off-by:
-
- 25 Aug, 2022 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5e ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/Signed-off-by:
-
Uros Bizjak authored
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in napi_if_scheduled_mark_missed. x86 CMPXCHG instruction returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg). Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg fails, enabling further code simplifications. Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Link: https://lore.kernel.org/r/20220822143243.2798-1-ubizjak@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from ipsec and netfilter (with one broken Fixes tag). Current release - new code bugs: - dsa: don't dereference NULL extack in dsa_slave_changeupper() - dpaa: fix <1G ethernet on LS1046ARDB - neigh: don't call kfree_skb() under spin_lock_irqsave() Previous releases - regressions: - r8152: fix the RX FIFO settings when suspending - dsa: microchip: keep compatibility with device tree blobs with no phy-mode - Revert "net: macsec: update SCI upon MAC address change." - Revert "xfrm: update SA curlft.use_time", comply with RFC 2367 Previous releases - always broken: - netfilter: conntrack: work around exceeded TCP receive window - ipsec: fix a null pointer dereference of dst->dev on a metadata dst in xfrm_lookup_with_ifid - moxa: get rid of asymmetry in DMA mapping/unmapping - dsa: microchip: make learning configurable and keep it off while standalone - ice: xsk: prohibit usage of non-balanced queue id - rxrpc: fix locking in rxrpc's sendmsg Misc: - another chunk of sysctl data race silencing" * tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) net: lantiq_xrx200: restore buffer if memory allocation failed net: lantiq_xrx200: fix lock under memory pressure net: lantiq_xrx200: confirm skb is allocated before using net: stmmac: work around sporadic tx issue on link-up ionic: VF initial random MAC address if no assigned mac ionic: fix up issues with handling EAGAIN on FW cmds ionic: clear broken state on generation change rxrpc: Fix locking in rxrpc's sendmsg net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2 MAINTAINERS: rectify file entry in BONDING DRIVER i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter net: Fix a data-race around sysctl_somaxconn. net: Fix a data-race around netdev_unregister_timeout_secs. net: Fix a data-race around gro_normal_batch. net: Fix data-races around sysctl_devconf_inherit_init_net. net: Fix data-races around sysctl_fb_tunnels_only_for_init_net. net: Fix a data-race around netdev_budget_usecs. net: Fix data-races around sysctl_max_skb_frags. net: Fix a data-race around netdev_budget. ... -
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Remove some unused code This patchset removes code that is not used anymore after the following two commits removed all users: - commit b0d80c01 ("mlxsw: Remove Mellanox SwitchX-2 ASIC support") - commit 9b43fbb8 ("mlxsw: Remove Mellanox SwitchIB ASIC support") ==================== Link: https://lore.kernel.org/r/cover.1661350629.git.petrm@nvidia.comSigned-off-by:
-
Jiri Pirko authored
Function mlxsw_core_port_type_get() is no longer used. So remove it. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Jiri Pirko authored
port_type_set devlink op is no longer used by any mlxsw driver, so remove it. Signed-off-by:
-
Jiri Pirko authored
There are some IB leftovers that are no longer used in the code. So remove them. Signed-off-by:
-
Jakub Kicinski authored
Jiri Pirko says: ==================== net: devlink: sync flash and dev info commands Purpose of this patchset is to introduce consistency between two devlink commands: devlink dev info Shows versions of running default flash target and components. devlink dev flash Flashes default flash target or component name (if specified on cmdline). Currently it is up to the driver what versions to expose and what flash update component names to accept. This is inconsistent. Thankfully, only netdevsim currently using components so it is still time to sanitize this. This patchset makes sure, that devlink.c calls into driver for component flash update only in case the driver exposes the same version name. Example: $ devlink dev info netdevsim/netdevsim10: driver netdevsim versions: running: fw.mgmt 10.20.30 stored: fw.mgmt 10.20.30 $ devlink dev flash netdevsim/netdevsim10 file somefile.bin [fw.mgmt] Preparing to flash [fw.mgmt] Flashing 100% [fw.mgmt] Flash select [fw.mgmt] Flashing done $ devlink dev flash netdevsim/netdevsim10 file somefile.bin component fw.mgmt [fw.mgmt] Preparing to flash [fw.mgmt] Flashing 100% [fw.mgmt] Flash select [fw.mgmt] Flashing done $ devlink dev flash netdevsim/netdevsim10 file somefile.bin component dummy Error: selected component is not supported by this device. ==================== Link: https://lore.kernel.org/r/20220824122011.1204330-1-jiri@resnulli.usSigned-off-by: -
Jiri Pirko authored
Limit the acceptance of component name passed to cmd_flash_update() to match one of the versions returned by info_get(), marked by version type. This makes things clearer and enforces 1:1 mapping between exposed version and accepted flash component. Check VERSION_TYPE_COMPONENT version type during cmd_flash_update() execution by calling info_get() with different "req" context. That causes info_get() to lookup the component name instead of filling-up the netlink message. Remove "UPDATE_COMPONENT" flag which becomes used. Signed-off-by:
-
Jiri Pirko authored
Fix the only component user which is netdevsim. It uses component named "fw.mgmt" in selftests. So add this version to info_get() output with version type component. Signed-off-by:
-
Jiri Pirko authored
Whenever the driver is called by his info_get() op, it may put multiple version names and values to the netlink message. Extend by additional helper devlink_info_version_running/stored_put_ext() that allows to specify a version type that indicates when particular version name represents a flash component. This is going to be used in follow-up patch calling info_get() during flash update command checking if version with this the version type exists. Signed-off-by:
-
Adel Abouchaev authored
Assinging will drop all previous tests. Fixes: b690842d ("selftests/net: test l2 tunnel TOS/TTL inheriting") Signed-off-by:
Adel Abouchaev <adel.abushaev@gmail.com> Reviewed-by:
Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20220824184351.3759862-1-adel.abushaev@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Aleksander Jan Bajkowski says: ==================== net: lantiq_xrx200: fix errors under memory pressure This series fixes issues that can occur in the driver under memory pressure. Situations when the system cannot allocate memory are rare, so the mentioned bugs have been fixed recently. The patches have been tested on a BT Home router with the Lantiq xRX200 chipset. Changelog: v3: - removed netdev_err() log from the first patch v2: - the second patch has been changed, so that under memory pressure situation the driver will not receive packets indefinitely regardless of the NAPI budget, - the third patch has been added. ==================== Link: https://lore.kernel.org/r/20220824215408.4695-1-olek2@wp.plSigned-off-by: -
Aleksander Jan Bajkowski authored
In a situation where memory allocation fails, an invalid buffer address is stored. When this descriptor is used again, the system panics in the build_skb() function when accessing memory. Fixes: 7ea6cd16 ("lantiq: net: fix duplicated skb in rx descriptor ring") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
-
Aleksander Jan Bajkowski authored
When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll function immediately returns an error. This is incorrect for two reasons: * the function terminates without enabling interrupts or scheduling NAPI, * the error code (-ENOMEM) is returned instead of the number of received packets. After the first memory allocation failure occurs, packet reception is locked due to disabled interrupts from DMA.. Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by:
-
