We get a bug during ltp can_filter test as following.

===========================================
[60919.264984] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[60919.265223] PGD 8000003dda726067 P4D 8000003dda726067 PUD 3dda727067 PMD 0
[60919.265443] Oops: 0000 [#1] SMP PTI
[60919.265550] CPU: 30 PID: 3638365 Comm: can_filter Kdump: loaded Tainted: G        W         4.19.90+ #1
[60919.266068] RIP: 0010:selinux_socket_sock_rcv_skb+0x3e/0x200
[60919.293289] RSP: 0018:ffff8d53bfc03cf8 EFLAGS: 00010246
[60919.307140] RAX: 0000000000000000 RBX: 000000000000001d RCX: 0000000000000007
[60919.320756] RDX: 0000000000000001 RSI: ffff8d5104a8ed00 RDI: ffff8d53bfc03d30
[60919.334319] RBP: ffff8d9338056800 R08: ffff8d53bfc29d80 R09: 0000000000000001
[60919.347969] R10: ffff8d53bfc03ec0 R11: ffffb8526ef47c98 R12: ffff8d53bfc03d30
[60919.350320] perf: interrupt took too long (3063 > 2500), lowering kernel.perf_event_max_sample_rate to 65000
[60919.361148] R13: 0000000000000001 R14: ffff8d53bcf90000 R15: 0000000000000000
[60919.361151] FS:  00007fb78b6b3600(0000) GS:ffff8d53bfc00000(0000) knlGS:0000000000000000
[60919.400812] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[60919.413730] CR2: 0000000000000010 CR3: 0000003e3f784006 CR4: 00000000007606e0
[60919.426479] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[60919.439339] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[60919.451608] PKRU: 55555554
[60919.463622] Call Trace:
[60919.475617]  <IRQ>
[60919.487122]  ? update_load_avg+0x89/0x5d0
[60919.498478]  ? update_load_avg+0x89/0x5d0
[60919.509822]  ? account_entity_enqueue+0xc5/0xf0
[60919.520709]  security_sock_rcv_skb+0x2a/0x40
[60919.531413]  sk_filter_trim_cap+0x47/0x1b0
[60919.542178]  ? kmem_cache_alloc+0x38/0x1b0
[60919.552444]  sock_queue_rcv_skb+0x17/0x30
[60919.562477]  raw_rcv+0x110/0x190 [can_raw]
[60919.572539]  can_rcv_filter+0xbc/0x1b0 [can]
[60919.582173]  can_receive+0x6b/0xb0 [can]
[60919.591595]  can_rcv+0x31/0x70 [can]
[60919.600783]  __netif_receive_skb_one_core+0x5a/0x80
[60919.609864]  process_backlog+0x9b/0x150
[60919.618691]  net_rx_action+0x156/0x400
[60919.627310]  ? sched_clock_cpu+0xc/0xa0
[60919.635714]  __do_softirq+0xe8/0x2e9
[60919.644161]  do_softirq_own_stack+0x2a/0x40
[60919.652154]  </IRQ>
[60919.659899]  do_softirq.part.17+0x4f/0x60
[60919.667475]  __local_bh_enable_ip+0x60/0x70
[60919.675089]  __dev_queue_xmit+0x539/0x920
[60919.682267]  ? finish_wait+0x80/0x80
[60919.689218]  ? finish_wait+0x80/0x80
[60919.695886]  ? sock_alloc_send_pskb+0x211/0x230
[60919.702395]  ? can_send+0xe5/0x1f0 [can]
[60919.708882]  can_send+0xe5/0x1f0 [can]
[60919.715037]  raw_sendmsg+0x16d/0x268 [can_raw]

It's because raw_setsockopt() concurrently with
unregister_netdevice_many(). Concurrent scenario as following.

	cpu0						cpu1
raw_bind
raw_setsockopt					unregister_netdevice_many
						unlist_netdevice
dev_get_by_index				raw_notifier
raw_enable_filters				......
can_rx_register
can_rcv_list_find(..., net->can.rx_alldev_list)

......

sock_close
raw_release(sock_a)

......

can_receive
can_rcv_filter(net->can.rx_alldev_list, ...)
raw_rcv(skb, sock_a)
BUG

After unlist_netdevice(), dev_get_by_index() return NULL in
raw_setsockopt(). Function raw_enable_filters() will add sock
and can_filter to net->can.rx_alldev_list. Then the sock is closed.
Followed by, we sock_sendmsg() to a new vcan device use the same
can_filter. Protocol stack match the old receiver whose sock has
been released on net->can.rx_alldev_list in can_rcv_filter().
Function raw_rcv() uses the freed sock. UAF BUG is triggered.

We can find that the key issue is that net_device has not been
protected in raw_setsockopt(). Use rtnl_lock to protect net_device
in raw_setsockopt().

Fixes: c18ce101 ("[CAN]: Add raw protocol")
Link: https://lore.kernel.org/r/20210722070819.1048263-1-william.xuanziyang@huawei.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

FlexCAN on i.MX8MP is not derived from i.MX6Q, instead reuses from
i.MX8QM with extra ECC added and default is enabled, so that the FlexCAN
would be put into freeze mode without FLEXCAN_QUIRK_DISABLE_MECR quirk.

This patch removes "fsl,imx6q-flexcan" fallback compatible string since
it's not compatible with the i.MX6Q.

Link: https://lore.kernel.org/r/20210719073437.32078-1-qiangqing.zhang@nxp.comSigned-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Shannon Nelson says:

====================
ionic: bug fixes

Fix a thread race in rx_mode, remove unnecessary log message,
fix dynamic coalescing issues, and count all csum_none cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Be sure to count the csum_none cases when csum offload is
enabled.

Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to count the correct Tx and/or Rx packets for dynamic
interrupt moderation, depending on which we're processing on
the queue interrupt.

Fixes: 04a83459 ("ionic: dynamic interrupt moderation")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the interrupt coalesce value update out of the napi
thread and into the dim_work thread and set it only when it
has actually changed.

Fixes: 04a83459 ("ionic: dynamic interrupt moderation")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

If PTP configuration is attempted on ports that don't support
it, such as VF ports, the driver will return an error status
-95, or EOPNOSUPP and print an error message
    enp98s0: hwstamp set failed: -95

Because some daemons can retry every few seconds, this can end
up filling the dmesg log and pushing out other more useful
messages.

We can catch this issue earlier in our handling and return
the error without a log message.

Fixes: 829600ce ("ionic: add ts_config replay")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the bulk of the code from ionic_set_rx_mode(), which
can be called from atomic context, into ionic_lif_rx_mode()
which is a safe context.

A call from the stack will get pushed off into a work thread,
but it is also possible to simultaneously have a call driven
by a queue reconfig request from an ethtool command or fw
recovery event.  We add a mutex around the rx_mode work to be
sure they don't collide.

Fixes: 81dbc241 ("ionic: change set_rx_mode from_ndo to can_sleep")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-07-23

This series contains updates to i40e driver only.

Arkadiusz corrects the order of calls for disabling queues to resolve
a false error message and adds a better message to the user when
transitioning FW LLDP back on while the firmware is still processing
the off request.

Lukasz adds additional information regarding possible incorrect cable
use when a PHY type error occurs.

Jedrzej adds ndo_select_queue support to resolve incorrect queue
selection when SW DCB is used and adds a warning when there are not
enough queues for desired TC configuration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-net-2021-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Couple of fixes:
 * fix aggregation on mesh
 * fix late enabling of 4-addr mode
 * leave monitor SKBs with some headroom
 * limit band information for old applications
 * fix virt-wifi WARN_ON
 * fix memory leak in cfg80211 BSS list maintenance

Commit 7930742d, reverting 26fd962b, missed out on reverting an incorrect
change to a return value.  The niu_pci_vpd_scan_props(..) == 1 case appears
to be a normal path - treating it as an error and return -EINVAL was
breaking VPD_SCAN and causing the driver to fail to load.

Fix, so my Neptune card works again.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Shannon Nelson <shannon.lee.nelson@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Fixes: 7930742d ('Revert "niu: fix missing checks of niu_pci_eeprom_read"')
Signed-off-by: Paul Jakma <paul@jakma.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzbot reported memory leak in qrtr. The problem was in unputted
struct sock. qrtr_local_enqueue() function calls qrtr_port_lookup()
which takes sock reference if port was found. Then there is the following
check:

if (!ipc || &ipc->sk == skb->sk) {
	...
	return -ENODEV;
}

Since we should drop the reference before returning from this function and
ipc can be non-NULL inside this if, we should add qrtr_port_put() inside
this if.

The similar corner case is in qrtr_endpoint_post() as Manivannan
reported. In case of sock_queue_rcv_skb() failure we need to put
port reference to avoid leaking struct sock pointer.

Fixes: e04df98a ("net: qrtr: Remove receive worker")
Fixes: bdabad3e ("net: Add Qualcomm IPC router")
Reported-and-tested-by: syzbot+35a511c72ea7356cdcf3@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayusosays:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Memleak in commit audit error path, from Dongliang Mu.

2) Avoid possible false sharing for flowtable timeout updates
   and nft_last use.

3) Adjust conntrack timestamp due to garbage collection delay,
   from Florian Westphal.

4) Fix nft_nat without layer 3 address for the inet family.

5) Fix compilation warning in nfnl_hook when ingress support
   is disabled, from Arnd Bergmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Get the number of VFs of a PF correctly by calling
rvu_get_pf_numvfs in rvu_switch_disable function.
Also hwvf is not required hence remove it.

Fixes: 23109f8d ("octeontx2-af: Introduce internal packet switching")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A wwan link created via the wwan_create_default_link procedure is
never notified to the user (RTM_NEWLINK), causing issues with user
tools relying on such event to track network links (NetworkManager).

This is because the procedure misses a call to rtnl_configure_link(),
which sets the link as initialized and notifies the new link (cf
proper usage in __rtnl_newlink()).

Cc: stable@vger.kernel.org
Fixes: ca374290 ("wwan: core: support default netdev creation")
Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The blamed commit modified the driver to accept the addition of VID 0
without doing anything, but deleting that VID still fails:

[   32.080780] mv88e6085 d0032004.mdio-mii:10 lan8: failed to kill vid 0081/0

Modify mv88e6xxx_port_vlan_leave() to do the same thing as the addition.

Fixes: b8b79c41 ("net: dsa: mv88e6xxx: Fix adding vlan 0")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Decrease hop limit counter when deliver skb to ndp proxy.
Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In cases where the header straight after the tunnel header was
another ethernet header (TEB), instead of the network header,
the ECN decapsulation code would treat the ethernet header as if
it was an IP header, resulting in mishandling and possible
wrong drops or corruption of the IP header.

In this case, ECT(1) is sent, so IP_ECN_decapsulate tries to copy it to the
inner IPv4 header, and correct its checksum.

The offset of the ECT bits in an IPv4 header corresponds to the
lower 2 bits of the second octet of the destination MAC address
in the ethernet header.
The IPv4 checksum corresponds to end of the source address.

In order to reproduce:

    $ ip netns add A
    $ ip netns add B
    $ ip -n A link add _v0 type veth peer name _v1 netns B
    $ ip -n A link set _v0 up
    $ ip -n A addr add dev _v0 10.254.3.1/24
    $ ip -n A route add default dev _v0 scope global
    $ ip -n B link set _v1 up
    $ ip -n B addr add dev _v1 10.254.1.6/24
    $ ip -n B route add default dev _v1 scope global
    $ ip -n B link add gre1 type gretap local 10.254.1.6 remote 10.254.3.1 key 0x49000000
    $ ip -n B link set gre1 up

    # Now send an IPv4/GRE/Eth/IPv4 frame where the outer header has ECT(1),
    # and the inner header has no ECT bits set:

    $ cat send_pkt.py
        #!/usr/bin/env python3
        from scapy.all import *

        pkt = IP(b'E\x01\x00\xa7\x00\x00\x00\x00@/`%\n\xfe\x03\x01\n\xfe\x01\x06 \x00eXI\x00'
                 b'\x00\x00\x18\xbe\x92\xa0\xee&\x18\xb0\x92\xa0l&\x08\x00E\x00\x00}\x8b\x85'
                 b'@\x00\x01\x01\xe4\xf2\x82\x82\x82\x01\x82\x82\x82\x02\x08\x00d\x11\xa6\xeb'
                 b'3\x1e\x1e\\xf3\\xf7`\x00\x00\x00\x00ZN\x00\x00\x00\x00\x00\x00\x10\x11\x12'
                 b'\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f !"#$%&\'()*+,-./01234'
                 b'56789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ')

        send(pkt)
    $ sudo ip netns exec B tcpdump -neqlllvi gre1 icmp & ; sleep 1
    $ sudo ip netns exec A python3 send_pkt.py

In the original packet, the source/destinatio MAC addresses are
dst=18:be:92:a0:ee:26 src=18:b0:92:a0:6c:26

In the received packet, they are
dst=18:bd:92:a0:ee:26 src=18:b0:92:a0:6c:27

Thanks to Lahav Schlesinger <lschlesinger@drivenets.com> and Isaac Garzon <isaac@speed.io>
for helping me pinpoint the origin.

Fixes: b7237487 ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040")
Cc: David S. Miller <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The release_sock() is blocking function, it would change the state
after sleeping. In order to evaluate the stated condition outside
the socket lock context, switch to use wait_woken() instead.

Fixes: 6398e23c ("tipc: standardize accept routine")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

For implicit-connect, when it's either SYN- or SYN+, an ACK should
be sent back to the client immediately. It's not appropriate for
the client to enter established state only after receiving data
from the server.

On client side, after the SYN is sent out, tipc_wait_for_connect()
should be called to wait for the ACK if timeout is set.

This patch also restricts __tipc_sendstream() to call __sendmsg()
only when it's in TIPC_OPEN state, so that the client can program
in a single loop doing both connecting and data sending like:

  for (...)
      sendmsg(dest, buf);

This makes the implicit-connect more implicit.

Fixes: b97bf3fd ("[TIPC] Initial merge")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove devm_kfree of memory where VLAN entry to RVU PF mapping
info is saved. This will be freed anyway at driver exit.
Having this could result in warning from devm_kfree() if
the memory is not allocated due to errors in rvu_nix_block_init()
before nix_setup_txvlan().

Fixes: 9a946def ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix missing failed message if driver does not have enough queues to
complete TC command. Without this fix no message is displayed in dmesg.

Fixes: a9ce82f7 ("i40e: Enable 'channel' mode in mqprio for TC configs")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

In SW DCB mode the packets sent receive incorrect UP tags. They are
constructed correctly and put into tx_ring, but UP is later remapped by
HW on the basis of TCTUPR register contents according to Tx queue
selected, and BW used is consistent with the new UP values. This is
caused by Tx queue selection in kernel not taking into account DCB
configuration. This patch fixes the issue by implementing the
ndo_select_queue NDO callback.

Fixes: fd0a05ce ("i40e: transmit, receive, and NAPI")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

In case of PHY type error occurs, the message was too generic.
Add additional info to PHY type error indicating that it can be
wrong cable connected.

Fixes: 124ed15b ("i40e: Add dual speed module support")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Make warning meaningful for the user.

Previously the trace:
"Starting FW LLDP agent failed: error: I40E_ERR_ADMIN_QUEUE_ERROR, I40E_AQ_RC_EAGAIN"
was produced when user tried to start Firmware LLDP agent,
just after it was stopped with sequence:
ethtool --set-priv-flags <dev> disable-fw-lldp on
ethtool --set-priv-flags <dev> disable-fw-lldp off
(without any delay between the commands)
At that point the firmware is still processing stop command, the behavior
is expected.

Fixes: c1041d07 ("i40e: Missing response checks in driver when starting/stopping FW LLDP")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Correct the message flow between driver and firmware when disabling
queues.

Previously in case of PF reset (due to required reinit after reconfig),
the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up
occasionally. The error was not a real issue of hardware or firmware,
it was caused by wrong sequence of messages invoked by the driver.

Fixes: 41c445ff ("i40e: main driver core")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The only user of this variable is in an #ifdef:

net/netfilter/nfnetlink_hook.c: In function 'nfnl_hook_entries_head':
net/netfilter/nfnetlink_hook.c:177:28: error: unused variable 'netdev' [-Werror=unused-variable]

Fixes: e2cf17d3 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

nft_nat reports a bogus EAFNOSUPPORT if no layer 3 information is specified.

Fixes: d07db988 ("netfilter: nf_tables: introduce nft_validate_register_load()")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

In case the entry is evicted via garbage collection there is
delay between the timeout value and the eviction event.

This adjusts the stop value based on how much time has passed.

Fixes: b87a2f91 ("netfilter: conntrack: add gc worker to remove timed-out entries")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Use the idiom described in:

https://github.com/google/ktsan/wiki/READ_ONCE-and-WRITE_ONCE#it-may-improve-performance

Moreover, prevent a compiler optimization.

Fixes: 836382dc ("netfilter: nf_tables: add last expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The flowtable follows the same timeout approach as conntrack, use the
same idiom as in cc169213 ("netfilter: conntrack: avoid same-timeout
update") but also include the fix provided by e37542ba ("netfilter:
conntrack: avoid possible false sharing").
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

When we exceed the limit of BSS entries, this function will free the
new entry, however, at this time, it is the last door to access the
inputed ies, so these ies will be unreferenced objects and cause memory
leak.
Therefore we should free its ies before deallocating the new entry, beside
of dropping it from hidden_list.
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Link: https://lore.kernel.org/r/20210628132334.851095-1-phind.uet@gmail.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

In non-split data, we shouldn't be adding S1G and 6 GHz
data (or future bands) since we're really close to the
4k message size limit. Remove those bands, any modern
userspace that can use S1G or 6 GHz should already be
using split dumps, and if not then it needs to update.

Link: https://lore.kernel.org/r/20210712215329.31444162a2c2.I5555312e4a074c84f8b4e7ad79dc4d1fbfc5126c@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When connecting without first doing a scan, the BSS list is empty
and __cfg80211_connect_result() generates this warning:

$ iw dev wlan0 connect -w VirtWifi
[   15.371989] ------------[ cut here ]------------
[   15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440
[   15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444
[   15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014
[   15.372597] Workqueue: cfg80211 cfg80211_event_work
[   15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440
[   15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd
[   15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246
[   15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472
[   15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba
[   15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8
[   15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98
[   15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100
[   15.373330] FS:  0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000
[   15.373382] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0
[   15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   15.373580] Call Trace:
[   15.373611]  ? cfg80211_process_wdev_events+0x10e/0x170
[   15.373743]  cfg80211_process_wdev_events+0x10e/0x170
[   15.373783]  cfg80211_process_rdev_events+0x21/0x40
[   15.373846]  cfg80211_event_work+0x20/0x30
[   15.373892]  process_one_work+0x1e9/0x340
[   15.373956]  worker_thread+0x4b/0x3f0
[   15.374017]  ? process_one_work+0x340/0x340
[   15.374053]  kthread+0x11f/0x140
[   15.374089]  ? set_kthread_struct+0x30/0x30
[   15.374153]  ret_from_fork+0x1f/0x30
[   15.374187] ---[ end trace 321ef0cb7e9c0be1 ]---
wlan0 (phy #0): connected to 00:00:00:00:00:00

Add the fake bss just before the connect so that cfg80211_get_bss()
finds the virtual network.
As some code was duplicated, move it in a common function.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Link: https://lore.kernel.org/r/20210706154423.11065-1-mcroce@linux.microsoft.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Notify the driver about the 4-address mode change and also send a nulldata
packet to the AP to notify it about the change

Fixes: 1ff4e8f2 ("mac80211: notify the driver when a sta uses 4-address mode")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210702050111.47546-1-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

The logic for starting aggregation sessions was recently moved from minstrel_ht
to mac80211, into the subif tx handler just after the sta lookup.
Unfortunately this didn't work for mesh interfaces, since the sta lookup is
deferred until a much later point in time on those.
Fix this by also calling the aggregation check right after the deferred sta
lookup.

Fixes: 08a46c64 ("mac80211: move A-MPDU session check from minstrel_ht to mac80211")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210629112853.29785-1-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When a monitor interface is present together with other interfaces, a
received skb is copied and received on the monitor netdev. Before, the
copied skb was allocated with exactly the amount of space needed for
the radiotap header, resulting in an skb without any headroom at all
being received on the monitor netdev. With the introduction of eBPF
and XDP in the kernel, skbs may be processed by custom eBPF programs.
However, since the skb cannot be reallocated in the eBPF program, no
more data or headers can be pushed. The old code made sure the final
headroom was zero regardless of the value of NET_SKB_PAD, so increasing
that constant would have no effect.

Now we allocate monitor skb copies with a headroom of NET_SKB_PAD bytes
before the radiotap header. Monitor interfaces now behave in the same
way as other netdev interfaces that honor the NET_SKB_PAD constant.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/r/20210628123713.2070753-1-johan.almbladh@anyfinetworks.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Pull arm64 fixes from Will Deacon:
 "A pair of arm64 fixes for -rc3. The straightforward one is a fix to
  our firmware calling stub, which accidentally started corrupting the
  link register on machines with SVE. Since these machines don't really
  exist yet, it wasn't spotted in -next.

  The other fix is a revert-and-a-bit of a patch originally intended to
  allow PTE-level huge mappings for the VMAP area on 32-bit PPC 8xx. A
  side-effect of this change was that our pXd_set_huge() implementations
  could be replaced with generic dummy functions depending on the levels
  of page-table being used, which in turn broke the boot if we fail to
  create the linear mapping as a result of using these functions to
  operate on the pgd. Huge thanks to Michael Ellerman for modifying the
  revert so as not to regress PPC 8xx in terms of functionality.

  Anyway, that's the background and it's also available in the commit
  message along with Link tags pointing at all of the fun.

  Summary:

   - Fix hang when issuing SMC on SVE-capable system due to
     clobbered LR

   - Fix boot failure due to missing block mappings with folded
     page-table"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Revert "mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge"
  arm64: smccc: Save lr before calling __arm_smccc_sve_check()

Merge tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - bug fix from Haiyang for vmbus CPU assignment

 - revert of a bogus patch that went into 5.14-rc1

* tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Revert "x86/hyperv: fix logical processor creation"
  Drivers: hv: vmbus: Fix duplicate CPU assignments within a device

Pull networking fixes from David Miller:

 1) Fix type of bind option flag in af_xdp, from Baruch Siach.

 2) Fix use after free in bpf_xdp_link_release(), from Xuan Zhao.

 3) PM refcnt imbakance in r8152, from Takashi Iwai.

 4) Sign extension ug in liquidio, from Colin Ian King.

 5) Mising range check in s390 bpf jit, from Colin Ian King.

 6) Uninit value in caif_seqpkt_sendmsg(), from Ziyong Xuan.

 7) Fix skb page recycling race, from Ilias Apalodimas.

 8) Fix memory leak in tcindex_partial_destroy_work, from Pave Skripkin.

 9) netrom timer sk refcnt issues, from Nguyen Dinh Phi.

10) Fix data races aroun tcp's tfo_active_disable_stamp, from Eric
    Dumazet.

11) act_skbmod should only operate on ethernet packets, from Peilin Ye.

12) Fix slab out-of-bpunds in fib6_nh_flush_exceptions(),, from Psolo
    Abeni.

13) Fix sparx5 dependencies, from Yajun Deng.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
  dpaa2-switch: seed the buffer pool after allocating the swp
  net: sched: cls_api: Fix the the wrong parameter
  net: sparx5: fix unmet dependencies warning
  net: dsa: tag_ksz: dont let the hardware process the layer 4 checksum
  net: dsa: ensure linearized SKBs in case of tail taggers
  ravb: Remove extra TAB
  ravb: Fix a typo in comment
  net: dsa: sja1105: make VID 4095 a bridge VLAN too
  tcp: disable TFO blackhole logic by default
  sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not set
  net: ixp46x: fix ptp build failure
  ibmvnic: Remove the proper scrq flush
  selftests: net: add ESP-in-UDP PMTU test
  udp: check encap socket in __udp_lib_err
  sctp: update active_key for asoc when old key is being replaced
  r8169: Avoid duplicate sysfs entry creation error
  ixgbe: Fix packet corruption due to missing DMA sync
  Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()"
  ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions
  fsl/fman: Add fibre support
  ...