- 14 Oct, 2014 25 commits
-
-
Tilman Schmidt authored
An invalid CAPI 2.0 command/subcommand combination may retrieve a NULL pointer from the cpars[] array which will later be dereferenced by the parser routines. Fix by adding NULL pointer checks in strategic places. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tilman Schmidt authored
Encapsulate accesses to the CAPI 2.0 command/subcommand name and parameter tables in a single place in preparation for redesign. Signed-off-by:
-
Tilman Schmidt authored
The result of the function command_2_index() is used to index two arrays mnames[] and cpars[] with max. index 0x4e but in its current form that function can produce results up to 3*(0x9+0x9)+0x7f = 0xb5. Fix by clamping all result values potentially overrunning the arrays to zero which is already handled as an invalid value. Re-spotted with Coverity. Signed-off-by:
-
Tilman Schmidt authored
Function capi20_manufacturer() is declared with unsigned int cmd argument but called with unsigned long. Fix by correcting the function prototype since the actual argument is part of the user visible API. Spotted with Coverity. Signed-off-by:
-
Tilman Schmidt authored
at_state structures may be allocated individually or as part of a cardstate or bc_state structure. The disconnect() function handled both cases, creating a risk that it might try to deallocate an at_state structure that had not been allocated individually. Fix by splitting disconnect() into two variants handling cases with and without an associated B channel separately, and adding an explicit check. Spotted with Coverity. Signed-off-by:
-
Tilman Schmidt authored
In do_action, a NULL pointer might be passed to function start_dial which will dereference it. Fix by adding a check for NULL before the call. Spotted with Coverity. Signed-off-by:
-
Tilman Schmidt authored
In dump_rawmsg, the length field from a received data package was used unscrutinized, allowing an attacker to control the size of the allocated buffer and the number of times the output loop iterates. Fix by limiting to a reasonable value. Spotted with Coverity. Signed-off-by:
-
Tilman Schmidt authored
In gigaset_isdn_regdev, the name field may not have a null terminator if the source string's length is equal to the buffer size. Fix by zero filling the structure and excluding the last byte of the name field from the copy. Spotted with Coverity. Signed-off-by:
-
Tilman Schmidt authored
If we take the unsupported supplementary service notification mask path, we end up falling through and overwriting the error code. Insert a break statement to skip the remainder of the switch case and proceed to sending the reply message. Spotted with Coverity. Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
David S. Miller authored
Luwei Zhou says: ==================== Enable FEC pps feather Change from v2 to v3: -Using the default channel 0 to be PPS channel not PTP_PIN_SET/GETFUNC interface. -Using the linux definition of NSEC_PER_SEC. Change from v1 to v2: - Fix the potential 32-bit multiplication overflow issue. - Optimize the hareware adjustment code to improve efficiency as Richard suggested - Use ptp PTP_PIN_SET/GETFUNC interface to set PPS channel not device tree and add PTP_PF_PPS enumeration - Modify comments style ==================== Signed-off-by: -
Luwei Zhou authored
FEC ptp timer has 4 channel compare/trigger function. It can be used to enable pps output. The pulse would be ouput high exactly on N second. The pulse ouput high on compare event mode is used to produce pulse per second. The pulse width would be one cycle based on ptp timer clock source.Since 31-bit ptp hardware timer is used, the timer will wrap more than 2 seconds. We need to reload the compare compare event about every 1 second. Signed-off-by:
Luwei Zhou <b45643@freescale.com> Signed-off-by:
-
Luwei Zhou authored
The FEC IP supports hardware adjustment for ptp timer. Refer to the description of ENET_ATCOR and ENET_ATINC registers in the spec about the hardware adjustment. This patch uses hardware support to adjust the ptp offset and frequency on the slave side. Signed-off-by:
Frank Li <Frank.Li@freescale.com> Signed-off-by:
Fugang Duan <b38611@freescale.com> Signed-off-by:
-
Luwei Zhou authored
When ptp switches from software adjustment to hardware ajustment, linux ptp can't converge. It is caused by the IP limit. Hardware adjustment logcial have issue when ptp counter runs over 0x80000000(31 bit counter). The internal IP reference manual already remove 32bit free-running count support. This patch replace the 32-bit PTP timer with 31-bit. Signed-off-by:
-
Li RongQing authored
no user uses this lock. Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Alexei Starovoitov authored
1. JIT compiler using multi-pass approach to converge to final image size, since x86 instructions are variable length. It starts with large gaps between instructions (so some jumps may use imm32 instead of imm8) and iterates until total program size is the same as in previous pass. This algorithm works only if program size is strictly decreasing. Programs that use LD_ABS insn need additional code in prologue, but it was not emitted during 1st pass, so there was a chance that 2nd pass would adjust imm32->imm8 jump offsets to the same number of bytes as increase in prologue, which may cause algorithm to erroneously decide that size converged. Fix it by always emitting largest prologue in the first pass which is detected by oldproglen==0 check. Also change error check condition 'proglen != oldproglen' to fail gracefully. 2. while staring at the code realized that 64-byte buffer may not be enough when 1st insn is large, so increase it to 128 to avoid buffer overflow (theoretical maximum size of prologue+div is 109) and add runtime check. Fixes: 62258278 ("net: filter: x86: internal BPF JIT") Reported-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Tested-by:
-
Eric Dumazet authored
TCP Small Queues (tcp_tsq_handler()) can hold one reference on sk->sk_wmem_alloc, preventing skb->ooo_okay being set. We should relax test done to set skb->ooo_okay to take care of this extra reference. Minimal truesize of skb containing one byte of payload is SKB_TRUESIZE(1) Without this fix, we have more chance locking flows into the wrong transmit queue. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Alexander Aring authored
If the skb is not dropped afterwards we should run consume_skb instead kfree_skb. Inside of function skb_unshare we do always a kfree_skb, doesn't depend if skb_copy failed or was successful. This patch switch this behaviour like skb_share_check, if allocation of sk_buff failed we use kfree_skb otherwise consume_skb. Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
-
Alexander Duyck authored
This change adds support for skb->xmit_more based on the changes that were made to igb to support the feature. The main changes are moving up the check for maybe_stop_tx so that we can check netif_xmit_stopped to determine if we must write the tail because we can add no further buffers. Acked-by:
Matthew Vick <matthew.vick@intel.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Nimrod Andy authored
reproduce: make ARCH=arm C=1 2>fec.txt drivers/net/ethernet/freescale/fec_main.o cat fec.txt sparse warnings: drivers/net/ethernet/freescale/fec_main.c:2916:12: warning: context imbalance in 'fec_set_features' - different lock contexts for basic block Christopher Li suggest to change as below: if (need_lock) { lock(); do_something_real(); unlock(); } else { do_something_real(); } Reported-by:Fabio Estevam <festevam@gmail.com> Suggested-by:
Christopher Li <sparse@chrisli.org> Signed-off-by:
-
Vince Bridgers authored
Signed-off-by:
Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== Here are some SCTP fixes. [ Note, immediate workaround would be to disable ASCONF (it is sysctl disabled by default). It is actually only used together with chunk authentication. ] ==================== Signed-off-by: -
Daniel Borkmann authored
This scenario is not limited to ASCONF, just taken as one example triggering the issue. When receiving ASCONF probes in the form of ... -------------- INIT[ASCONF; ASCONF_ACK] -------------> <----------- INIT-ACK[ASCONF; ASCONF_ACK] ------------ -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- ---- ASCONF_a; [ASCONF_b; ...; ASCONF_n;] JUNK ------> [...] ---- ASCONF_m; [ASCONF_o; ...; ASCONF_z;] JUNK ------> ... where ASCONF_a, ASCONF_b, ..., ASCONF_z are good-formed ASCONFs and have increasing serial numbers, we process such ASCONF chunk(s) marked with !end_of_packet and !singleton, since we have not yet reached the SCTP packet end. SCTP does only do verification on a chunk by chunk basis, as an SCTP packet is nothing more than just a container of a stream of chunks which it eats up one by one. We could run into the case that we receive a packet with a malformed tail, above marked as trailing JUNK. All previous chunks are here goodformed, so the stack will eat up all previous chunks up to this point. In case JUNK does not fit into a chunk header and there are no more other chunks in the input queue, or in case JUNK contains a garbage chunk header, but the encoded chunk length would exceed the skb tail, or we came here from an entirely different scenario and the chunk has pdiscard=1 mark (without having had a flush point), it will happen, that we will excessively queue up the association's output queue (a correct final chunk may then turn it into a response flood when flushing the queue ;)): I ran a simple script with incremental ASCONF serial numbers and could see the server side consuming excessive amount of RAM [before/after: up to 2GB and more]. The issue at heart is that the chunk train basically ends with !end_of_packet and !singleton markers and since commit 2e3216cd ("sctp: Follow security requirement of responding with 1 packet") therefore preventing an output queue flush point in sctp_do_sm() -> sctp_cmd_interpreter() on the input chunk (chunk = event_arg) even though local_cork is set, but its precedence has changed since then. In the normal case, the last chunk with end_of_packet=1 would trigger the queue flush to accommodate possible outgoing bundling. In the input queue, sctp_inq_pop() seems to do the right thing in terms of discarding invalid chunks. So, above JUNK will not enter the state machine and instead be released and exit the sctp_assoc_bh_rcv() chunk processing loop. It's simply the flush point being missing at loop exit. Adding a try-flush approach on the output queue might not work as the underlying infrastructure might be long gone at this point due to the side-effect interpreter run. One possibility, albeit a bit of a kludge, would be to defer invalid chunk freeing into the state machine in order to possibly trigger packet discards and thus indirectly a queue flush on error. It would surely be better to discard chunks as in the current, perhaps better controlled environment, but going back and forth, it's simply architecturally not possible. I tried various trailing JUNK attack cases and it seems to look good now. Joint work with Vlad Yasevich. Fixes: 2e3216cd ("sctp: Follow security requirement of responding with 1 packet") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
When receiving a e.g. semi-good formed connection scan in the form of ... -------------- INIT[ASCONF; ASCONF_ACK] -------------> <----------- INIT-ACK[ASCONF; ASCONF_ACK] ------------ -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- ---------------- ASCONF_a; ASCONF_b -----------------> ... where ASCONF_a equals ASCONF_b chunk (at least both serials need to be equal), we panic an SCTP server! The problem is that good-formed ASCONF chunks that we reply with ASCONF_ACK chunks are cached per serial. Thus, when we receive a same ASCONF chunk twice (e.g. through a lost ASCONF_ACK), we do not need to process them again on the server side (that was the idea, also proposed in the RFC). Instead, we know it was cached and we just resend the cached chunk instead. So far, so good. Where things get nasty is in SCTP's side effect interpreter, that is, sctp_cmd_interpreter(): While incoming ASCONF_a (chunk = event_arg) is being marked !end_of_packet and !singleton, and we have an association context, we do not flush the outqueue the first time after processing the ASCONF_ACK singleton chunk via SCTP_CMD_REPLY. Instead, we keep it queued up, although we set local_cork to 1. Commit 2e3216cd changed the precedence, so that as long as we get bundled, incoming chunks we try possible bundling on outgoing queue as well. Before this commit, we would just flush the output queue. Now, while ASCONF_a's ASCONF_ACK sits in the corked outq, we continue to process the same ASCONF_b chunk from the packet. As we have cached the previous ASCONF_ACK, we find it, grab it and do another SCTP_CMD_REPLY command on it. So, effectively, we rip the chunk->list pointers and requeue the same ASCONF_ACK chunk another time. Since we process ASCONF_b, it's correctly marked with end_of_packet and we enforce an uncork, and thus flush, thus crashing the kernel. Fix it by testing if the ASCONF_ACK is currently pending and if that is the case, do not requeue it. When flushing the output queue we may relink the chunk for preparing an outgoing packet, but eventually unlink it when it's copied into the skb right before transmission. Joint work with Vlad Yasevich. Fixes: 2e3216cd ("sctp: Follow security requirement of responding with 1 packet") Signed-off-by:
-
Daniel Borkmann authored
Commit 6f4c618d ("SCTP : Add paramters validity check for ASCONF chunk") added basic verification of ASCONF chunks, however, it is still possible to remotely crash a server by sending a special crafted ASCONF chunk, even up to pre 2.6.12 kernels: skb_over_panic: text:ffffffffa01ea1c3 len:31056 put:30768 head:ffff88011bd81800 data:ffff88011bd81800 tail:0x7950 end:0x440 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:129! [...] Call Trace: <IRQ> [<ffffffff8144fb1c>] skb_put+0x5c/0x70 [<ffffffffa01ea1c3>] sctp_addto_chunk+0x63/0xd0 [sctp] [<ffffffffa01eadaf>] sctp_process_asconf+0x1af/0x540 [sctp] [<ffffffff8152d025>] ? _read_unlock_bh+0x15/0x20 [<ffffffffa01e0038>] sctp_sf_do_asconf+0x168/0x240 [sctp] [<ffffffffa01e3751>] sctp_do_sm+0x71/0x1210 [sctp] [<ffffffff8147645d>] ? fib_rules_lookup+0xad/0xf0 [<ffffffffa01e6b22>] ? sctp_cmp_addr_exact+0x32/0x40 [sctp] [<ffffffffa01e8393>] sctp_assoc_bh_rcv+0xd3/0x180 [sctp] [<ffffffffa01ee986>] sctp_inq_push+0x56/0x80 [sctp] [<ffffffffa01fcc42>] sctp_rcv+0x982/0xa10 [sctp] [<ffffffffa01d5123>] ? ipt_local_in_hook+0x23/0x28 [iptable_filter] [<ffffffff8148bdc9>] ? nf_iterate+0x69/0xb0 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148bf86>] ? nf_hook_slow+0x76/0x120 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff81496ded>] ip_local_deliver_finish+0xdd/0x2d0 [<ffffffff81497078>] ip_local_deliver+0x98/0xa0 [<ffffffff8149653d>] ip_rcv_finish+0x12d/0x440 [<ffffffff81496ac5>] ip_rcv+0x275/0x350 [<ffffffff8145c88b>] __netif_receive_skb+0x4ab/0x750 [<ffffffff81460588>] netif_receive_skb+0x58/0x60 This can be triggered e.g., through a simple scripted nmap connection scan injecting the chunk after the handshake, for example, ... -------------- INIT[ASCONF; ASCONF_ACK] -------------> <----------- INIT-ACK[ASCONF; ASCONF_ACK] ------------ -------------------- COOKIE-ECHO --------------------> <-------------------- COOKIE-ACK --------------------- ------------------ ASCONF; UNKNOWN ------------------> ... where ASCONF chunk of length 280 contains 2 parameters ... 1) Add IP address parameter (param length: 16) 2) Add/del IP address parameter (param length: 255) ... followed by an UNKNOWN chunk of e.g. 4 bytes. Here, the Address Parameter in the ASCONF chunk is even missing, too. This is just an example and similarly-crafted ASCONF chunks could be used just as well. The ASCONF chunk passes through sctp_verify_asconf() as all parameters passed sanity checks, and after walking, we ended up successfully at the chunk end boundary, and thus may invoke sctp_process_asconf(). Parameter walking is done with WORD_ROUND() to take padding into account. In sctp_process_asconf()'s TLV processing, we may fail in sctp_process_asconf_param() e.g., due to removal of the IP address that is also the source address of the packet containing the ASCONF chunk, and thus we need to add all TLVs after the failure to our ASCONF response to remote via helper function sctp_add_asconf_response(), which basically invokes a sctp_addto_chunk() adding the error parameters to the given skb. When walking to the next parameter this time, we proceed with ... length = ntohs(asconf_param->param_hdr.length); asconf_param = (void *)asconf_param + length; ... instead of the WORD_ROUND()'ed length, thus resulting here in an off-by-one that leads to reading the follow-up garbage parameter length of 12336, and thus throwing an skb_over_panic for the reply when trying to sctp_addto_chunk() next time, which implicitly calls the skb_put() with that length. Fix it by using sctp_walk_params() [ which is also used in INIT parameter processing ] macro in the verification *and* in ASCONF processing: it will make sure we don't spill over, that we walk parameters WORD_ROUND()'ed. Moreover, we're being more defensive and guard against unknown parameter types and missized addresses. Joint work with Vlad Yasevich. Fixes: b896b82b ("[SCTP] ADDIP: Support for processing incoming ASCONF_ACK chunks.") Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Bruno Thomsen authored
Bug: Unable to send and receive Ethernet packets with Micrel PHY. Affected devices: KSZ8031RNL (commercial temp) KSZ8031RNLI (industrial temp) Description: PHY device is correctly detected during probe. PHY power-up default is 25MHz crystal clock input and output 50MHz RMII clock to MAC. Reconfiguration of PHY to input 50MHz RMII clock from MAC causes PHY to become unresponsive if clock source is changed after Operation Mode Strap Override (OMSO) register setup. Cause: Long lead times on parts where clock setup match circuit design forces the usage of similar parts with wrong default setup. Solution: Swapped KSZ8031 register setup and added phy_write return code validation. Tested with Freescale i.MX28 Fast Ethernet Controler (fec). Signed-off-by:
Bruno Thomsen <bth@kamstrup.dk> Signed-off-by:
-
- 10 Oct, 2014 15 commits
-
-
David S. Miller authored
Florian Fainelli says: ==================== net: bcmgenet & systemport fixes This patch series fixes an off-by-one error introduced during a previous change, and the two other fixes fix a wake depth imbalance situation for the Wake-on-LAN interrupt line. ==================== Signed-off-by: -
Florian Fainelli authored
Multiple enable_irq_wake() calls will keep increasing the IRQ wake_depth, which ultimately leads to the following types of situation: 1) enable Wake-on-LAN interrupt w/o password 2) enable Wake-on-LAN interrupt w/ password 3) enable Wake-on-LAN interrupt w/o password 4) disable Wake-on-LAN interrupt After step 4), SYSTEMPORT would always wake-up the system no matter what wake-up device we use, which is not what we want. Fix this by making sure there are no unbalanced enable_irq_wake() calls. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Multiple enable_irq_wake() calls will keep increasing the IRQ wake_depth, which ultimately leads to the following types of situation: 1) enable Wake-on-LAN interrupt w/o password 2) enable Wake-on-LAN interrupt w/ password 3) enable Wake-on-LAN interrupt w/o password 4) disable Wake-on-LAN interrupt After step 4), GENET would always wake-up the system no matter what wake-up device we use, which is not what we want. Fix this by making sure there are no unbalanced enable_irq_wake() calls. Signed-off-by:
-
Florian Fainelli authored
Commit b629be5c ("net: bcmgenet: check harder for out of memory conditions") moved the increment of the local read pointer *before* reading from the hardware descriptor using dmadesc_get_length_status(), which creates an off-by-one situation. Fix this by moving again the read_ptr increment after we have read the hardware descriptor to get both the control block and the read pointer back in sync. Fixes: b629be5c ("net: bcmgenet: check harder for out of memory conditions") Signed-off-by:
Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by:
Petri Gynther <pgynther@google.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net: fix races accessing page->_count This is illegal to use atomic_set(&page->_count, ...) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. The only case it is valid is when page->_count is 0, we can use this in __netdev_alloc_frag() Note that I never seen crashes caused by these races, the issue was reported by Andres Lagar-Cavilla and Hugh Dickins. ==================== Signed-off-by: -
Eric Dumazet authored
This is illegal to use atomic_set(&page->_count, ...) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. The only case it is valid is when page->_count is 0 Fixes: 540eb7bf ("net: Update alloc frag to reduce get/put page usage and recycle pages") Signed-off-by:
-
Eric Dumazet authored
This is illegal to use atomic_set(&page->_count, ...) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. Signed-off-by:
-
Eric Dumazet authored
This is illegal to use atomic_set(&page->_count, 2) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. Signed-off-by:
-
Eric Dumazet authored
This is illegal to use atomic_set(&page->_count, 2) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. Signed-off-by:
-
Eric Dumazet authored
This is illegal to use atomic_set(&page->_count, 2) even if we 'own' the page. Other entities in the kernel need to use get_page_unless_zero() to get a reference to the page before testing page properties, so we could loose a refcount increment. Signed-off-by:
-
Sascha Hauer authored
The KSZ8021 and KSZ8031 support RMII reference input clocks of 25MHz and 50MHz. Both PHYs differ in the default frequency they expect after reset. If this differs from the actual input clock, then register 0x1f bit 7 must be changed. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by:
-
Alexander Duyck authored
This patch addresses a kernel unaligned access bug seen on a sparc64 system with an igb adapter. Specifically the __skb_flow_get_ports was returning a be32 pointer which was then having the value directly returned. In order to prevent this it is actually easier to simply not populate the ports or address values when an skb is not present. In this case the assumption is that the data isn't needed and rather than slow down the faster aligned accesses by making them have to assume the unaligned path on architectures that don't support efficent unaligned access it makes more sense to simply switch off the bits that were copying the source and destination address/port for the case where we only care about the protocol types and lengths which are normally 16 bit fields anyway. Reported-by:
-
Li RongQing authored
1. sk_run_filter has been renamed, sk_filter() is using SK_RUN_FILTER. 2. Remove wrong comments about storing intermediate value. 3. replace sk_run_filter with __bpf_prog_run for check_load_and_stores's comments Cc: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Li RongQing authored
__sk_run_filter has been renamed as __bpf_prog_run, so replace them in comments Signed-off-by:
-
David S. Miller authored
Jason Baron says: ==================== macvlan: optimize receive path So after porting this optimization to net-next, I found that the netperf results of TCP_RR regress right at the maximum peak of transactions/sec. That is as I increase the number of threads via the first argument to super_netperf, the number of transactions/sec keep increasing, peak, and then start decreasing. It is right at the peak, that I see a small regression with this patch (see results in patch 2/2). Without the patch, the ksoftirqd threads are the top cpu consumers threads on the system, since the extra 'netif_rx()', is queuing more softirq work, whereas with the patch, the ksoftirqd threads are below all of the 'netserver' threads in terms of their cpu usage. So there appears to be some interaction between how softirqs are serviced at the peak here and this patch. I think the test results are still supportive of this approach, but I wanted to be clear on my findings. ==================== Signed-off-by:
-
