An error occurred fetching the project authors.
- 22 Sep, 2011 2 commits
-
-
Jouni Malinen authored
Since we may end up using a dummy BSS entry when roaming, allow one Beacon frame -based bssinfo from the current BSS to be processed prior to starting to filter all bssinfo events. This allows cfg80211 BSS table to be filled with proper data in the roaming case where the full Beacon data may not have been present at the time of roamed event. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Jouni Malinen authored
Now that the scan results are reported directly to the cfg80211 BSS table there is no need for maintaining this internal node table implementation for scan results. Remove the definitions and node table functions. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 16 Sep, 2011 6 commits
-
-
Vasanthakumar Thiagarajan authored
Target already tries with different authentication mechanism when authentication type is configured to NL80211_AUTHTYPE_AUTOMATIC. Remove this piece of code from driver. Having this code in driver even affects auto + WEP authentication in some cases. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kalle Valo authored
The new firmware format includes capability bits which make it possible to check what features the firmware supports. Add infrastructure to read the capabilities. For now it only provides ATH6KL_FW_CAPABILITY_HOST_P2P which is not even used anywhere yet, but that will be added later. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kalle Valo authored
A new version of firmware needs different reserved ram size so read that from the firmware image. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kalle Valo authored
Less if clauses this way and again easier to override the values. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kalle Valo authored
Currently the load address was calculated everytime when it was needed, and with a mess if clauses. Simplify this by adding a field to struct ath6kl for each address and choose the address with simple switch statements. Also move the code just after target version is retrieved. That way it's easier to override the values later in the boot process. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kalle Valo authored
In the new format all the format images are embedded into one file. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 06 Sep, 2011 2 commits
-
-
Jouni Malinen authored
For now, use a module parameter (ath6kl_p2p) to allow P2P support to be enabled. This is needed since there is no mechanism for enabling the P2P mode more dynamically for a single netdev. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Jouni Malinen authored
This cleans up the connect event parsing by defining a union in struct wmi_connect_event to match with the three possible sets of fields that the target uses depending on which type of connect event is being indicated. In addition, two AP cases are now separated from ath6kl_connect_event() so that correct field names can be used to make it actually possible to understand what the code is doing. The bug hiding in the previous mess was in parsing the AID incorrectly when processing the new station connecting event in AP mode. The fix here for that is also fixing TIM updates for PS buffering to use the correct AID. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 05 Sep, 2011 3 commits
-
-
Vasanthakumar Thiagarajan authored
To write a value to register: echo <register_offset>=<register_value> > <degfs_root>/ieee80211/phyX/ath6kl/reg_write kvalo: rename file to reg_write to follow the style of other debugfs files Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Vasanthakumar Thiagarajan authored
So that this can be called from debug.c when adding support to write chip register. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 02 Sep, 2011 6 commits
-
-
Vivek Natarajan authored
Firmware initiates roaming only after it reaches a rssi of 20. This lower rssi threshold can be modified through a wmi command to modify the roaming behavior. kvalo: rename debugfs functions and move comment about rssi units next to ath6kl_wmi_set_roam_lrssi_cmd() Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Vasanthakumar Thiagarajan authored
To dump a particular register: echo <reg_addr> > <debugfs_root>/ieee80211/phyX/ath6kl/reg_addr To dump the entire register set: echo 0 > <debugfs_root>/ieee80211/phyX/ath6kl/reg_addr Register values will be available at: cat <debugfs_root>/ieee80211/phyX/ath6kl/reg_dump kvalo: commit log cleanup, renamed few functions, removed a warning message Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kalle Valo authored
Firmare sends the logs only when it's internal ring buffer is full. But if firmware crashes we need to retrieve the latest logs through diagnose window. This is now done everytime the debugfs file is read. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kalle Valo authored
Just to make them a bit easier to read and unify naming. 32 suffix in the function name means that it will be a 32 bit transfer. If there's no number a buffer is transfered instead. Use void pointers to get rid of ugly casts. Don't provide target address as a pointer, pass it by value. Same for the value used in write32(). Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kalle Valo authored
Firmware log parameters can be controlled now with help of fwlog_mask debugfs file. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kalle Valo authored
Firmware sends binary logs with WMIX_DBGLOG_EVENTID event. Create a buffer which stores the latest logs and which can be copied from fwlog debugfs file with cp command. To save memory firmware log support is enabled only when CONFIG_ATH6KL_DEBUG is enabled. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 01 Sep, 2011 1 commit
-
-
Kalle Valo authored
This is port from the staging version of ath6kl. The interface to user space is exactly same. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 31 Aug, 2011 9 commits
-
-
Edward Lu authored
Signed-off-by: Edward Lu <elu@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Jouni Malinen authored
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Jouni Malinen authored
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Jouni Malinen authored
The target is not ready to accept addkey commands until the connect event has been delivered, so delay these operations for the initial GTK. In addition, properly set interface connected and mark netdev ready when the AP mode setup has been completed. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Jouni Malinen authored
Use cfg80211 add/del_beacon callbacks for starting/stopping AP mode and set_beacon to update AP configuration (mainly, to update Beacon and Probe Response IEs). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Vasanthakumar Thiagarajan authored
Just initial debugfs changes. The debugfs directory would be created at <debugfs_root>/ieee80211/phyX/ath6kl. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kalle Valo authored
For now this is implemented so that if host supports power is kept in the chip. If that's not supported, an error is returned and sdio stack will remove the device during suspend. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Vasanthakumar Thiagarajan authored
For non-scatter buffers, there is already a bounce buffer which takes care of alignment. This patch is influenced by a rough patch of Kalle. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kevin Fang authored
Support isn't complete yet. Signed-off-by: Kevin Fang <kevin.fang@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
- 09 Aug, 2011 4 commits
-
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Vasanthakumar Thiagarajan authored
It does not need to be in wmi Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Raja Mani authored
Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-
Kalle Valo authored
Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Suraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
-