This adds support for writing extended attributes on SMB2+ shares.
Attributes can be written using the setfattr command.

RH-bz: 1110709
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

SMB1 already has support to read attributes. This adds similar support
to SMB2+.

With this patch, tools such as 'getfattr' will now work with SMB2+ shares.

RH-bz: 1110709
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Pull documentation updates from Jonathan Corbet:
 "After a fair amount of churn in the last couple of cycles, docs are
  taking it easier this time around. Lots of fixes and some new
  documentation, but nothing all that radical. Perhaps the most
  interesting change for many is the scripts/sphinx-pre-install tool
  from Mauro; it will tell you exactly which packages you need to
  install to get a working docs toolchain on your system.

  There are two little patches reaching outside of Documentation/; both
  just tweak kerneldoc comments to eliminate warnings and fix some
  dangling doc pointers"

* 'docs-next' of git://git.lwn.net/linux: (52 commits)
  Documentation/sphinx: fix kernel-doc decode for non-utf-8 locale
  genalloc: Fix an incorrect kerneldoc comment
  doc: Add documentation for the genalloc subsystem
  assoc_array: fix path to assoc_array documentation
  kernel-doc parser mishandles declarations split into lines
  docs: ReSTify table of contents in core.rst
  docs: process: drop git snapshots from applying-patches.rst
  Documentation:input: fix typo
  swap: Remove obsolete sentence
  sphinx.rst: Allow Sphinx version 1.6 at the docs
  docs-rst: fix verbatim font size on tables
  Documentation: stable-kernel-rules: fix broken git urls
  rtmutex: update rt-mutex
  rtmutex: update rt-mutex-design
  docs: fix minimal sphinx version in conf.py
  docs: fix nested numbering in the TOC
  NVMEM documentation fix: A minor typo
  docs-rst: pdf: use same vertical margin on all Sphinx versions
  doc: Makefile: if sphinx is not found, run a check script
  docs: Fix paths in security/keys
  ...

Merge tag 'hwmon-for-linus-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - new drivers:
   - Lantiq CPU temperature sensor
   - IBM CFF power supply
   - TPS53679 PMBus driver

 - new support:
   - LM5066I (lm25066 PMBus driver)
   - Intel VID protocol VR13 (PMBus drivers)
   - CAT34TS02C, GT30TS00, GT34TS02, and CAT34TS04 (jc42 driver)

 - cleanup and minor improvements in several drivers

* tag 'hwmon-for-linus-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (36 commits)
  hwmon: (ltq-cputemp) add cpu temp sensor driver
  hwmon: (ltq-cputemp) add devicetree bindings documentation
  hwmon: (pmbus) Add support for Texas Instruments tps53679 device
  hwmon: (asc7621) make several arrays static const
  hwmon: (pmbus/lm25066) Add support for TI LM5066I
  hwmon: (pmbus/lm25066) Offset coefficient depends on CL
  hwmon: (pmbus) Add support for Intel VID protocol VR13
  Documentation: hwmon: Document the IBM CFF power supply
  hwmon: (pmbus) Add IBM Common Form Factor (CFF) power supply driver
  dt-bindings: hwmon: Document the IBM CCF power supply version 1
  hwmon: (ftsteutates) constify i2c_device_id
  hwmon: da9052: Add support for TSI channel
  mfd: da9052: Make touchscreen registration optional
  hwmon: da9052: Replace S_IRUGO with 0444
  mfd: da9052: Add register details for TSI
  hwmon: (aspeed-pwm) add THERMAL dependency
  hwmon: (pmbus) Add debugfs for status registers
  hwmon: (aspeed-pwm-tacho) cooling device support.
  Documentation: dt-bindings: aspeed-pwm-tacho cooling device.
  hwmon: (pmbus): Add generic alarm bit for iin and pin
  ...

Pull rdma updates from Doug Ledford:
 "This is a big pull request.

  Of note is that I'm sending you the new ioctl API for the rdma
  subsystem. We put it up on linux-api@, but didn't get much response.
  The API is complex, but it solves two different problems in one go:

   1) The bi-directional nature of the RDMA file write calls, which
      created the security hole we had to handle (and for which the fix
      is now causing problems for systems in production, we were a bit
      over zealous in the fix and the ability to open a device, then
      fork, then create new queue pairs on the device and use them is
      broken).

   2) The bloat caused by different vendors implementing extensions to
      the base verbs API. Each vendor's hardware is slightly different,
      and the hardware might be suitable for one extension but not
      another.

      By the time we add generic extensions for all the different ways
      that the different hardware can offload things, the API becomes
      bloated. Things like our completion structs have started to exceed
      a cache line in size because of all the elements needed to support
      this. That in turn shows up heavily in the performance graphs with
      a noticable drop in performance on 100Gigabit links as our
      completion structs go from occupying one cache line to 1+.

      This API makes things like the completion structs modular in a
      very similar way to netlink so that your structs can only include
      the items needed for the offloads/features you are actually using
      on a given queue pair. In that way we support everything, but only
      use what we need, and our structs stay smaller.

  The ioctl API is better explained by the posting on linux-api@ than I
  can explain it here, so I'll just leave it at that.

  The rest of the pull request is typical stuff.

  Updates for 4.14 kernel merge window

   - Lots of hfi1 driver updates (mixed with a few qib and core updates
     as well)

   - rxe updates

   - various mlx updates

   - Set default roce type to RoCEv2

   - Several larger fixes for bnxt_re that were too big for -rc

   - Several larger fixes for qedr that, likewise, were too big for -rc

   - Misc core changes

   - Make the hns_roce driver compilable on arches other than aarch64 so
     we can more easily debug build issues related to it

   - Add rdma-netlink infrastructure updates

   - Add automatic IRQ affinity infrastructure

   - Add 32bit lid support

   - Lots of misc fixes across the subsystem from random people

   - Autoloading of RDMA netlink modules

   - PCI pool cleanups from Romain Perier

   - mlx5 driver feature additions and fixes

   - Hardware tag matchine feature

   - Fix sleeping in atomic when resolving roce ah

   - Add experimental ioctl interface as posted to linux-api@"

* tag 'for-linus-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (328 commits)
  IB/core: Expose ioctl interface through experimental Kconfig
  IB/core: Assign root to all drivers
  IB/core: Add completion queue (cq) object actions
  IB/core: Add legacy driver's user-data
  IB/core: Export ioctl enum types to user-space
  IB/core: Explicitly destroy an object while keeping uobject
  IB/core: Add macros for declaring methods and attributes
  IB/core: Add uverbs merge trees functionality
  IB/core: Add DEVICE object and root tree structure
  IB/core: Declare an object instead of declaring only type attributes
  IB/core: Add new ioctl interface
  RDMA/vmw_pvrdma: Fix a signedness
  RDMA/vmw_pvrdma: Report network header type in WC
  IB/core: Add might_sleep() annotation to ib_init_ah_from_wc()
  IB/cm: Fix sleeping in atomic when RoCE is used
  IB/core: Add support to finalize objects in one transaction
  IB/core: Add a generic way to execute an operation on a uobject
  Documentation: Hardware tag matching
  IB/mlx5: Support IB_SRQT_TM
  net/mlx5: Add XRQ support
  ...

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.14 merge window.

  I'm sending this early, as my continuing journey into fatherhood is
  occurring really soon now, I'm going to be mostly useless for the next
  couple of weeks, though I may be able to read email, I doubt I'll be
  doing much patch applications or git sending. If anything urgent pops
  up I've asked Daniel/Jani/Alex/Sean to try and direct stuff towards
  you.

  Outside drm changes:

  Some rcar-du updates that touch the V4L tree, all acks should be in
  place. It adds one export to the radix tree code for new i915 use
  case. There are some minor AGP cleanups (don't see that too often).
  Changes to the vbox driver in staging to avoid breaking compilation.

  Summary:

  core:
   - Atomic helper fixes
   - Atomic UAPI fixes
   - Add YCBCR 4:2:0 support
   - Drop set_busid hook
   - Refactor fb_helper locking
   - Remove a bunch of internal APIs
   - Add a bunch of better default handlers
   - Format modifier/blob plane property added
   - More internal header refactoring
   - Make more internal API names consistent
   - Enhanced syncobj APIs (wait/signal/reset/create signalled)

  bridge:
   - Add Synopsys Designware MIPI DSI host bridge driver

  tiny:
   - Add Pervasive Displays RePaper displays
   - Add support for LEGO MINDSTORMS EV3 LCD

  i915:
   - Lots of GEN10/CNL  support patches
   - drm syncobj support
   - Skylake+ watermark refactoring
   - GVT vGPU 48-bit ppgtt support
   - GVT performance improvements
   - NOA change ioctl
   - CCS (color compression) scanout support
   - GPU reset improvements

  amdgpu:
   - Initial hugepage support
   - BO migration logic rework
   - Vega10 improvements
   - Powerplay fixes
   - Stop reprogramming the MC
   - Fixes for ACP audio on stoney
   - SR-IOV fixes/improvements
   - Command submission overhead improvements

  amdkfd:
   - Non-dGPU upstreaming patches
   - Scratch VA ioctl
   - Image tiling modes
   - Update PM4 headers for new firmware
   - Drop all BUG_ONs.

  nouveau:
   - GP108 modesetting support.
   - Disable MSI on big endian.

  vmwgfx:
   - Add fence fd support.

  msm:
   - Runtime PM improvements

  exynos:
   - NV12MT support
   - Refactor KMS drivers

  imx-drm:
   - Lock scanout channel to improve memory bw
   - Cleanups

  etnaviv:
   - GEM object population fixes

  tegra:
   - Prep work for Tegra186 support
   - PRIME mmap support

  sunxi:
   - HDMI support improvements
   - HDMI CEC support

  omapdrm:
   - HDMI hotplug IRQ support
   - Big driver cleanup
   - OMAP5 DSI support

  rcar-du:
   - vblank fixes
   - VSP1 updates

  arcgpu:
   - Minor fixes

  stm:
   - Add STM32 DSI controller driver

  dw_hdmi:
   - Add support for Rockchip RK3399
   - HDMI CEC support

  atmel-hlcdc:
   - Add 8-bit color support

  vc4:
   - Atomic fixes
   - New ioctl to attach a label to a buffer object
   - HDMI CEC support
   - Allow userspace to dictate rendering order on submit ioctl"

* tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux: (1074 commits)
  drm/syncobj: Add a signal ioctl (v3)
  drm/syncobj: Add a reset ioctl (v3)
  drm/syncobj: Add a syncobj_array_find helper
  drm/syncobj: Allow wait for submit and signal behavior (v5)
  drm/syncobj: Add a CREATE_SIGNALED flag
  drm/syncobj: Add a callback mechanism for replace_fence (v3)
  drm/syncobj: add sync obj wait interface. (v8)
  i915: Use drm_syncobj_fence_get
  drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2)
  drm/syncobj: Rename fence_get to find_fence
  drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate
  drm/vmwgfx: Bump the version for fence FD support
  drm/vmwgfx: Add export fence to file descriptor support
  drm/vmwgfx: Add support for imported Fence File Descriptor
  drm/vmwgfx: Prepare to support fence fd
  drm/vmwgfx: Fix incorrect command header offset at restart
  drm/vmwgfx: Support the NOP_ERROR command
  drm/vmwgfx: Restart command buffers after errors
  drm/vmwgfx: Move irq bottom half processing to threads
  drm/vmwgfx: Don't use drm_irq_[un]install
  ...

Pull misc fixes from Al Viro:
 "Loose ends and regressions from the last merge window.

  Strictly speaking, only binfmt_flat thing is a build regression per
  se - the rest is 'only sparse cares about that' stuff"

[ This came in before the 4.13 release and could have gone there, but it
  was late in the release and nothing seemed critical enough to care, so
  I'm pulling it in the 4.14 merge window instead  - Linus ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  binfmt_flat: fix arch/m32r and arch/microblaze flat_put_addr_at_rp()
  compat_hdio_ioctl: Fix a declaration
  <linux/uaccess.h>: Fix copy_in_user() declaration
  annotate RWF_... flags
  teach SYSCALL_DEFINE/COMPAT_SYSCALL_DEFINE to handle __bitwise arguments

Pull MIPS fixes from Ralf Baechle:
 "The two indirect syscall fixes have sat in linux-next for a few days.
  I did check back with a hardware designer to ensure a SYNC is really
  what's required for the GIC fix and so the GIC fix didn't make it into
  to linux-next in time for this final pull request.

  It builds in local build tests and passes Imagination's test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  irqchip: mips-gic: SYNC after enabling GIC region
  MIPS: Remove pt_regs adjustments in indirect syscall handler
  MIPS: seccomp: Fix indirect syscall args

Pull x86 fixes from Thomas Gleixner:

 - Expand the space for uncompressing as the LZ4 worst case does not fit
   into the currently reserved space

 - Validate boot parameters more strictly to prevent out of bound access
   in the decompressor/boot code

 - Fix off by one errors in get_segment_base()

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Prevent faulty bootparams.screeninfo from causing harm
  x86/boot: Provide more slack space during decompression
  x86/ldt: Fix off by one in get_segment_base()

Pull timer fix from Thomas Gleixner:
 "A single fix for a thinko in the raw timekeeper update which causes
  clock MONOTONIC_RAW to run with erratically increased frequency"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Fix ktime_get_raw() incorrect base accumulation

Pull perf fixes from Thomas Gleixner:

 - Prevent a potential inconistency in the perf user space access which
   might lead to evading sanity checks.

 - Prevent perf recording function trace entries twice

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/ftrace: Fix double traces of perf on ftrace:function
  perf/core: Fix potential double-fetch bug

Pull cifs version warning fix from Steve French:
 "As requested, additional kernel warning messages to clarify the
  default dialect changes"

[ There is still some discussion about exactly which version should be
  the new default.  Longer-term we have auto-negotiation coming, but
  that's not there yet..  - Linus ]

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  Fix warning messages when mounting to older servers

Pull ARM SoC fixes from Olof Johansson:
 "A couple of late-arriving fixes before final 4.13:

   - A few reverts of DT bindings on Allwinner for their ethernet
     driver. Discussion didn't converge, and since bindings are
     considered ABI it makes sense to revert instead of having to
     support two bindings long-term.

   - A fix to enumerate GPIOs properly on Marvell Armada AP806"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: dts: marvell: fix number of GPIOs in Armada AP806 description
  arm: dts: sunxi: Revert EMAC changes
  arm64: dts: allwinner: Revert EMAC changes
  dt-bindings: net: Revert sun8i dwmac binding

mvebu fixes for 4.13 (part 3)

Fix number of GPIOs in AP806 description for Armada 7K/8K

* tag 'mvebu-fixes-4.13-3' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: fix number of GPIOs in Armada AP806 description
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull i2c fixes from Wolfram Sang:
 "The ismt driver had a problem with a rarely used transaction type and
  the designware driver was made even more robust against non standard
  ACPI tables"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Round down ACPI provided clk to nearest supported clk
  i2c: ismt: Return EMSGSIZE for block reads with bogus length
  i2c: ismt: Don't duplicate the receive length for block reads

The race was introduced by me in commit 971316f0 ("epoll:
ep_unregister_pollwait() can use the freed pwq->whead").  I did not
realize that nothing can protect eventpoll after ep_poll_callback() sets
->whead = NULL, only whead->lock can save us from the race with
ep_free() or ep_remove().

Move ->whead = NULL to the end of ep_poll_callback() and add the
necessary barriers.

TODO: cleanup the ewake/EPOLLEXCLUSIVE logic, it was confusing even
before this patch.

Hopefully this explains use-after-free reported by syzcaller:

	BUG: KASAN: use-after-free in debug_spin_lock_before
	...
	 _raw_spin_lock_irqsave+0x4a/0x60 kernel/locking/spinlock.c:159
	 ep_poll_callback+0x29f/0xff0 fs/eventpoll.c:1148

this is spin_lock(eventpoll->lock),

	...
	Freed by task 17774:
	...
	 kfree+0xe8/0x2c0 mm/slub.c:3883
	 ep_free+0x22c/0x2a0 fs/eventpoll.c:865

Fixes: 971316f0 ("epoll: ep_unregister_pollwait() can use the freed pwq->whead")
Reported-by: 范龙飞 <long7573@126.com>
Cc: stable@vger.kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix handling of pinned BPF map nodes in hash of maps, from Daniel
    Borkmann.

 2) IPSEC ESP error paths leak memory, from Steffen Klassert.

 3) We need an RCU grace period before freeing fib6_node objects, from
    Wei Wang.

 4) Must check skb_put_padto() return value in HSR driver, from FLorian
    Fainelli.

 5) Fix oops on PHY probe failure in ftgmac100 driver, from Andrew
    Jeffery.

 6) Fix infinite loop in UDP queue when using SO_PEEK_OFF, from Eric
    Dumazet.

 7) Use after free when tcf_chain_destroy() called multiple times, from
    Jiri Pirko.

 8) Fix KSZ DSA tag layer multiple free of SKBS, from Florian Fainelli.

 9) Fix leak of uninitialized memory in sctp_get_sctp_info(),
    inet_diag_msg_sctpladdrs_fill() and inet_diag_msg_sctpaddrs_fill().
    From Stefano Brivio.

10) L2TP tunnel refcount fixes from Guillaume Nault.

11) Don't leak UDP secpath in udp_set_dev_scratch(), from Yossi
    Kauperman.

12) Revert a PHY layer change wrt. handling of PHY_HALTED state in
    phy_stop_machine(), it causes regressions for multiple people. From
    Florian Fainelli.

13) When packets are sent out of br0 we have to clear the
    offload_fwdq_mark value.

14) Several NULL pointer deref fixes in packet schedulers when their
    ->init() routine fails. From Nikolay Aleksandrov.

15) Aquantium devices cannot checksum offload correctly when the packet
    is <= 60 bytes. From Pavel Belous.

16) Fix vnet header access past end of buffer in AF_PACKET, from
    Benjamin Poirier.

17) Double free in probe error paths of nfp driver, from Dan Carpenter.

18) QOS capability not checked properly in DCB init paths of mlx5
    driver, from Huy Nguyen.

19) Fix conflicts between firmware load failure and health_care timer in
    mlx5, also from Huy Nguyen.

20) Fix dangling page pointer when DMA mapping errors occur in mlx5,
    from Eran Ben ELisha.

21) ->ndo_setup_tc() in bnxt_en driver doesn't count rings properly,
    from Michael Chan.

22) Missing MSIX vector free in bnxt_en, also from Michael Chan.

23) Refcount leak in xfrm layer when using sk_policy, from Lorenzo
    Colitti.

24) Fix copy of uninitialized data in qlge driver, from Arnd Bergmann.

25) bpf_setsockopts() erroneously always returns -EINVAL even on
    success. Fix from Yuchung Cheng.

26) tipc_rcv() needs to linearize the SKB before parsing the inner
    headers, from Parthasarathy Bhuvaragan.

27) Fix deadlock between link status updates and link removal in netvsc
    driver, from Stephen Hemminger.

28) Missed locking of page fragment handling in ESP output, from Steffen
    Klassert.

29) Fix refcnt leak in ebpf congestion control code, from Sabrina
    Dubroca.

30) sxgbe_probe_config_dt() doesn't check devm_kzalloc()'s return value,
    from Christophe Jaillet.

31) Fix missing ipv6 rx_dst_cookie update when rx_dst is updated during
    early demux, from Paolo Abeni.

32) Several info leaks in xfrm_user layer, from Mathias Krause.

33) Fix out of bounds read in cxgb4 driver, from Stefano Brivio.

34) Properly propagate obsolete state of route upwards in ipv6 so that
    upper holders like xfrm can see it. From Xin Long.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (118 commits)
  udp: fix secpath leak
  bridge: switchdev: Clear forward mark when transmitting packet
  mlxsw: spectrum: Forbid linking to devices that have uppers
  wl1251: add a missing spin_lock_init()
  Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
  net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278
  kcm: do not attach PF_KCM sockets to avoid deadlock
  sch_tbf: fix two null pointer dereferences on init failure
  sch_sfq: fix null pointer dereference on init failure
  sch_netem: avoid null pointer deref on init failure
  sch_fq_codel: avoid double free on init failure
  sch_cbq: fix null pointer dereferences on init failure
  sch_hfsc: fix null pointer deref and double free on init failure
  sch_hhf: fix null pointer dereference on init failure
  sch_multiq: fix double free on init failure
  sch_htb: fix crash on init failure
  net/mlx5e: Fix CQ moderation mode not set properly
  net/mlx5e: Fix inline header size for small packets
  net/mlx5: E-Switch, Unload the representors in the correct order
  net/mlx5e: Properly resolve TC offloaded ipv6 vxlan tunnel source address
  ...

Pull ceph fix from Ilya Dryomov:
 "ceph fscache page locking fix from Zheng, marked for stable"

* tag 'ceph-for-4.13-rc8' of git://github.com/ceph/ceph-client:
  ceph: fix readpage from fscache

Pull input fixes from Dmitry Torokhov:
 "Just a couple drivers fixes (Synaptics PS/2, Xpad)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - fix PowerA init quirk for some gamepad models
  Input: synaptics - fix device info appearing different on reconnect

Pull two more MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix block status codes

  MMC host:
   - sdhci-xenon: Fix SD bus voltage select"

* tag 'mmc-v4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-xenon: add set_power callback
  mmc: block: Fix block status codes

Pull sound fixes from Takashi Iwai:
 "Three regression fixes that should be addressed before the final
  release: a missing mutex call in OSS PCM emulation ioctl, ASoC rt5670
  headset detection breakage, and a regression in simple-card parser
  code"

* tag 'sound-4.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: simple_card_utils: fix fallback when "label" property isn't present
  ALSA: pcm: Fix power lock unbalance via OSS emulation
  ASoC: rt5670: Fix GPIO headset detection regression

Pull s390 fixes from Martin Schwidefsky:
 "Three more bug fixes for v4.13.

  The two memory management related fixes are quite new, they fix kernel
  crashes that can be triggered by user space.

  The third commit fixes a bug in the vfio ccw translation code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: fix BUG_ON in crst_table_upgrade
  s390/mm: fork vs. 5 level page tabel
  vfio: ccw: fix bad ptr math for TIC cda translation

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - Regression in chacha20 handling of chunked input

   - Crash in algif_skcipher when used with async io

   - Potential bogus pointer dereference in lib/mpi"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_skcipher - only call put_page on referenced and used pages
  crypto: testmgr - add chunked test cases for chacha20
  crypto: chacha20 - fix handling of chunked input
  lib/mpi: kunmap after finishing accessing buffer

After commit dce4551c ("udp: preserve head state for IP_CMSG_PASSSEC")
we preserve the secpath for the whole skb lifecycle, but we also
end up leaking a reference to it.

We must clear the head state on skb reception, if secpath is
present.

Fixes: dce4551c ("udp: preserve head state for IP_CMSG_PASSSEC")
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 6bc506b4 ("bridge: switchdev: Add forward mark support for
stacked devices") added the 'offload_fwd_mark' bit to the skb in order
to allow drivers to indicate to the bridge driver that they already
forwarded the packet in L2.

In case the bit is set, before transmitting the packet from each port,
the port's mark is compared with the mark stored in the skb's control
block. If both marks are equal, we know the packet arrived from a switch
device that already forwarded the packet and it's not re-transmitted.

However, if the packet is transmitted from the bridge device itself
(e.g., br0), we should clear the 'offload_fwd_mark' bit as the mark
stored in the skb's control block isn't valid.

This scenario can happen in rare cases where a packet was trapped during
L3 forwarding and forwarded by the kernel to a bridge device.

Fixes: 6bc506b4 ("bridge: switchdev: Add forward mark support for stacked devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Yotam Gigi <yotamg@mellanox.com>
Tested-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mlxsw driver relies on NETDEV_CHANGEUPPER events to configure the
device in case a port is enslaved to a master netdev such as bridge or
bond.

Since the driver ignores events unrelated to its ports and their
uppers, it's possible to engineer situations in which the device's data
path differs from the kernel's.

One example to such a situation is when a port is enslaved to a bond
that is already enslaved to a bridge. When the bond was enslaved the
driver ignored the event - as the bond wasn't one of its uppers - and
therefore a bridge port instance isn't created in the device.

Until such configurations are supported forbid them by checking that the
upper device doesn't have uppers of its own.

Fixes: 0d65fc13 ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Nogah Frankel <nogahf@mellanox.com>
Tested-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the lantiq cpu temperature sensor support for xrx200.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Document the devicetree bindings for the ltq-cputemp
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

When mounting to older servers, such as Windows XP (or even Windows 7),
the limited error messages that can be passed back to user space can
get confusing since the default dialect has changed from SMB1 (CIFS) to
more secure SMB3 dialect. Log additional information when the user chooses
to use the default dialects and when the server does not support the
dialect requested.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>

Pull cifs fixes from Steve French:
 "Two cifs bug fixes for stable"

* tag 'cifs-fixes-for-4.13-rc7-and-stable' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: remove endian related sparse warning
  CIFS: Fix maximum SMB2 header size

Pull block fixes from Jens Axboe:
 "Unfortunately a few issues that warrant sending another pull request,
  even if I had hoped to avoid it. This contains:

   - A fix for multiqueue xen-blkback, on tear down / disconnect.

   - A few fixups for NVMe, including a wrong bit definition, fix for
     host memory buffers, and an nvme rdma page size fix"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme: fix the definition of the doorbell buffer config support bit
  nvme-pci: use dma memory for the host memory buffer descriptors
  nvme-rdma: default MR page size to 4k
  xen-blkback: stop blkback thread of every queue in xen_blkif_disconnect

Merge tag 'for-4.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - A couple fixes for bugs introduced as part of the blk_status_t block
   layer changes during the 4.13 merge window

 - A printk throttling fix to use discrete rate limiting state for each
   DM log level

 - A stable@ fix for DM multipath that delays request requeueing to
   avoid CPU lockup if/when the request queue is "dying"

* tag 'for-4.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm mpath: do not lock up a CPU with requeuing activity
  dm: fix printk() rate limiting code
  dm mpath: retry BLK_STS_RESOURCE errors
  dm: fix the second dec_pending() argument in __split_and_process_bio()

Merge more fixes from Andrew Morton:
 "6 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  scripts/dtc: fix '%zx' warning
  include/linux/compiler.h: don't perform compiletime_assert with -O0
  mm, madvise: ensure poisoned pages are removed from per-cpu lists
  mm, uprobes: fix multiple free of ->uprobes_state.xol_area
  kernel/kthread.c: kthread_worker: don't hog the cpu
  mm,page_alloc: don't call __node_reclaim() with oom_lock held.

Merge mmu_notifier fixes from Jérôme Glisse:
 "The invalidate_page callback suffered from 2 pitfalls. First it used
  to happen after page table lock was release and thus a new page might
  have been setup for the virtual address before the call to
  invalidate_page().

  This is in a weird way fixed by commit c7ab0d2f ("mm: convert
  try_to_unmap_one() to use page_vma_mapped_walk()") which moved the
  callback under the page table lock. Which also broke several existing
  user of the mmu_notifier API that assumed they could sleep inside this
  callback.

  The second pitfall was invalidate_page being the only callback not
  taking a range of address in respect to invalidation but was giving an
  address and a page. Lot of the callback implementer assumed this could
  never be THP and thus failed to invalidate the appropriate range for
  THP pages.

  By killing this callback we unify the mmu_notifier callback API to
  always take a virtual address range as input.

  There is now two clear API (I am not mentioning the youngess API which
  is seldomly used):

   - invalidate_range_start()/end() callback (which allow you to sleep)

   - invalidate_range() where you can not sleep but happen right after
     page table update under page table lock

  Note that a lot of existing user feels broken in respect to
  range_start/ range_end. Many user only have range_start() callback but
  there is nothing preventing them to undo what was invalidated in their
  range_start() callback after it returns but before any CPU page table
  update take place.

  The code pattern use in kvm or umem odp is an example on how to
  properly avoid such race. In a nutshell use some kind of sequence
  number and active range invalidation counter to block anything that
  might undo what the range_start() callback did.

  If you do not care about keeping fully in sync with CPU page table (ie
  you can live with CPU page table pointing to new different page for a
  given virtual address) then you can take a reference on the pages
  inside the range_start callback and drop it in range_end or when your
  driver is done with those pages.

  Last alternative is to use invalidate_range() if you can do
  invalidation without sleeping as invalidate_range() callback happens
  under the CPU page table spinlock right after the page table is
  updated.

  The first two patches convert existing mmu_notifier_invalidate_page()
  calls to mmu_notifier_invalidate_range() and bracket those call with
  call to mmu_notifier_invalidate_range_start()/end().

  The next ten patches remove existing invalidate_page() callback as it
  can no longer happen.

  Finally the last page remove the invalidate_page() callback completely
  so it can RIP.

  Changes since v1:
   - remove more dead code in kvm (no testing impact)
   - more accurate end address computation (patch 2) in page_mkclean_one
     and try_to_unmap_one
   - added tested-by/reviewed-by gotten so far"

* emailed patches from Jérôme Glisse <jglisse@redhat.com>:
  mm/mmu_notifier: kill invalidate_page
  KVM: update to new mmu_notifier semantic v2
  xen/gntdev: update to new mmu_notifier semantic
  sgi-gru: update to new mmu_notifier semantic
  misc/mic/scif: update to new mmu_notifier semantic
  iommu/intel: update to new mmu_notifier semantic
  iommu/amd: update to new mmu_notifier semantic
  IB/hfi1: update to new mmu_notifier semantic
  IB/umem: update to new mmu_notifier semantic
  drm/amdgpu: update to new mmu_notifier semantic
  powerpc/powernv: update to new mmu_notifier semantic
  mm/rmap: update to new mmu_notifier semantic v2
  dax: update to new mmu_notifier semantic

jfs had previously avoided the use of MAX_LFS_FILESIZE because it hadn't
accounted for the whole 32-bit index range on 32-bit systems.  That has
been fixed by commit 0cc3b0ec ("Clarify (and fix) MAX_LFS_FILESIZE
macros"), so we can simplify the code now.

Suggested by Andreas Dilger.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: jfs-discussion@lists.sourceforge.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dtc uses an incorrect format specifier for printing a uint64_t value.
uint64_t may be either 'unsigned long' or 'unsigned long long' depending
on the host architecture.

Fix this by using %llx and casting to unsigned long long, which ensures
that we always have a wide enough variable to print 64 bits of hex.

    HOSTCC  scripts/dtc/checks.o
  scripts/dtc/checks.c: In function 'check_simple_bus_reg':
  scripts/dtc/checks.c:876:2: warning: format '%zx' expects argument of type 'size_t', but argument 4 has type 'uint64_t' [-Wformat=]
    snprintf(unit_addr, sizeof(unit_addr), "%zx", reg);
    ^
  scripts/dtc/checks.c:876:2: warning: format '%zx' expects argument of type 'size_t', but argument 4 has type 'uint64_t' [-Wformat=]

Link: http://lkml.kernel.org/r/20170829222034.GJ20805@n2100.armlinux.org.uk
Fixes: 828d4cdd ("dtc: check.c fix compile error")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit c7acec71 ("kernel.h: handle pointers to arrays better in
container_of()") made use of __compiletime_assert() from container_of()
thus increasing the usage of this macro, allowing developers to notice
type conflicts in usage of container_of() at compile time.

However, the implementation of __compiletime_assert relies on compiler
optimizations to report an error.  This means that if a developer uses
"-O0" with any code that performs container_of(), the compiler will always
report an error regardless of whether there is an actual problem in the
code.

This patch disables compile_time_assert when optimizations are disabled to
allow such code to compile with CFLAGS="-O0".

Example compilation failure:

./include/linux/compiler.h:547:38: error: call to `__compiletime_assert_94' declared with attribute error: pointer type mismatch in container_of()
  _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
                                      ^
./include/linux/compiler.h:530:4: note: in definition of macro `__compiletime_assert'
    prefix ## suffix();    \
    ^~~~~~
./include/linux/compiler.h:547:2: note: in expansion of macro `_compiletime_assert'
  _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
  ^~~~~~~~~~~~~~~~~~~
./include/linux/build_bug.h:46:37: note: in expansion of macro `compiletime_assert'
 #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
                                     ^~~~~~~~~~~~~~~~~~
./include/linux/kernel.h:860:2: note: in expansion of macro `BUILD_BUG_ON_MSG'
  BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) && \
  ^~~~~~~~~~~~~~~~

[akpm@linux-foundation.org: use do{}while(0), per Michal]
Link: http://lkml.kernel.org/r/20170829230114.11662-1-joe@ovn.org
Fixes: c7acec71 ("kernel.h: handle pointers to arrays better in container_of()")
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Wendy Wang reported off-list that a RAS HWPOISON-SOFT test case failed
and bisected it to the commit 479f854a ("mm, page_alloc: defer
debugging checks of pages allocated from the PCP").

The problem is that a page that was poisoned with madvise() is reused.
The commit removed a check that would trigger if DEBUG_VM was enabled
but re-enabling the check only fixes the problem as a side-effect by
printing a bad_page warning and recovering.

The root of the problem is that an madvise() can leave a poisoned page
on the per-cpu list.  This patch drains all per-cpu lists after pages
are poisoned so that they will not be reused.  Wendy reports that the
test case in question passes with this patch applied.  While this could
be done in a targeted fashion, it is over-complicated for such a rare
operation.

Link: http://lkml.kernel.org/r/20170828133414.7qro57jbepdcyz5x@techsingularity.net
Fixes: 479f854a ("mm, page_alloc: defer debugging checks of pages allocated from the PCP")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Wang, Wendy <wendy.wang@intel.com>
Tested-by: Wang, Wendy <wendy.wang@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Hansen, Dave" <dave.hansen@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 7c051267 ("mm, fork: make dup_mmap wait for mmap_sem for
write killable") made it possible to kill a forking task while it is
waiting to acquire its ->mmap_sem for write, in dup_mmap().

However, it was overlooked that this introduced an new error path before
the new mm_struct's ->uprobes_state.xol_area has been set to NULL after
being copied from the old mm_struct by the memcpy in dup_mm().  For a
task that has previously hit a uprobe tracepoint, this resulted in the
'struct xol_area' being freed multiple times if the task was killed at
just the right time while forking.

Fix it by setting ->uprobes_state.xol_area to NULL in mm_init() rather
than in uprobe_dup_mmap().

With CONFIG_UPROBE_EVENTS=y, the bug can be reproduced by the same C
program given by commit 2b7e8665 ("fork: fix incorrect fput of
->exe_file causing use-after-free"), provided that a uprobe tracepoint
has been set on the fork_thread() function.  For example:

    $ gcc reproducer.c -o reproducer -lpthread
    $ nm reproducer | grep fork_thread
    0000000000400719 t fork_thread
    $ echo "p $PWD/reproducer:0x719" > /sys/kernel/debug/tracing/uprobe_events
    $ echo 1 > /sys/kernel/debug/tracing/events/uprobes/enable
    $ ./reproducer

Here is the use-after-free reported by KASAN:

    BUG: KASAN: use-after-free in uprobe_clear_state+0x1c4/0x200
    Read of size 8 at addr ffff8800320a8b88 by task reproducer/198

    CPU: 1 PID: 198 Comm: reproducer Not tainted 4.13.0-rc7-00015-g36fde05f #255
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014
    Call Trace:
     dump_stack+0xdb/0x185
     print_address_description+0x7e/0x290
     kasan_report+0x23b/0x350
     __asan_report_load8_noabort+0x19/0x20
     uprobe_clear_state+0x1c4/0x200
     mmput+0xd6/0x360
     do_exit+0x740/0x1670
     do_group_exit+0x13f/0x380
     get_signal+0x597/0x17d0
     do_signal+0x99/0x1df0
     exit_to_usermode_loop+0x166/0x1e0
     syscall_return_slowpath+0x258/0x2c0
     entry_SYSCALL_64_fastpath+0xbc/0xbe

    ...

    Allocated by task 199:
     save_stack_trace+0x1b/0x20
     kasan_kmalloc+0xfc/0x180
     kmem_cache_alloc_trace+0xf3/0x330
     __create_xol_area+0x10f/0x780
     uprobe_notify_resume+0x1674/0x2210
     exit_to_usermode_loop+0x150/0x1e0
     prepare_exit_to_usermode+0x14b/0x180
     retint_user+0x8/0x20

    Freed by task 199:
     save_stack_trace+0x1b/0x20
     kasan_slab_free+0xa8/0x1a0
     kfree+0xba/0x210
     uprobe_clear_state+0x151/0x200
     mmput+0xd6/0x360
     copy_process.part.8+0x605f/0x65d0
     _do_fork+0x1a5/0xbd0
     SyS_clone+0x19/0x20
     do_syscall_64+0x22f/0x660
     return_from_SYSCALL_64+0x0/0x7a

Note: without KASAN, you may instead see a "Bad page state" message, or
simply a general protection fault.

Link: http://lkml.kernel.org/r/20170830033303.17927-1-ebiggers3@gmail.com
Fixes: 7c051267 ("mm, fork: make dup_mmap wait for mmap_sem for write killable")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>    [4.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>