- 26 Nov, 2011 20 commits
-
-
Andrew Worsley authored
commit b1ffb4c8 upstream. Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by:
Andrew Worsley <amworsley@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
wangyanqing authored
commit 0c165955 upstream. I get report from customer that his usb-serial converter doesn't work well,it sometimes work, but sometimes it doesn't. The usb-serial converter's id: vendor_id product_id 0x4348 0x5523 Then I search the usb-serial codes, and there are two drivers announce support this device, pl2303 and ch341, commit 026dfaf1 cause it. Through many times to test, ch341 works well with this device, and pl2303 doesn't work quite often(it just work quite little). ch341 works well with this device, so we doesn't need pl2303 to support.I try to revert 026dfaf1 first, but it failed. So I prepare this patch by hand to revert it. Signed-off-by:
Wang YanQing <Udknight@gmail.com> Signed-off-by:
-
Michal Marek authored
commit 8417da6f upstream. Starting with 4.4, gcc will happily accept -Wno-<anything> in the cc-option test and complain later when compiling a file that has some other warning. This rather unexpected behavior is intentional as per http://gcc.gnu.org/PR28322, so work around it by testing for support of the opposite option (without the no-). Introduce a new Makefile function cc-disable-warning that does this and update two uses of cc-option in the toplevel Makefile. Reported-and-tested-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Shan Wei authored
commit a9cf73ea upstream. At this point, skb->data points to skb_transport_header. So, headroom check is wrong. For some case:bridge(UFO is on) + eth device(UFO is off), there is no enough headroom for IPv6 frag head. But headroom check is always false. This will bring about data be moved to there prior to skb->head, when adding IPv6 frag header to skb. Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mitsuo Hayasaka authored
commit f5252e00 upstream The /proc/vmallocinfo shows information about vmalloc allocations in vmlist that is a linklist of vm_struct. It, however, may access pages field of vm_struct where a page was not allocated. This results in a null pointer access and leads to a kernel panic. Why this happen: In __vmalloc_node() called from vmalloc(), newly allocated vm_struct is added to vmlist at __get_vm_area_node() and then, some fields of vm_struct such as nr_pages and pages are set at __vmalloc_area_node(). In other words, it is added to vmlist before it is fully initialized. At the same time, when the /proc/vmallocinfo is read, it accesses the pages field of vm_struct according to the nr_pages field at show_numa_info(). Thus, a null pointer access happens. Patch: This patch adds newly allocated vm_struct to the vmlist *after* it is fully initialized. So, it can avoid accessing the pages field with unallocated page when show_numa_info() is called. Signed-off-by:
Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Rientjes <rientjes@google.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by:
-
Ian Campbell authored
commit 9bab0b7f upstream This adds a mechanism to resume selected IRQs during syscore_resume instead of dpm_resume_noirq. Under Xen we need to resume IRQs associated with IPIs early enough that the resched IPI is unmasked and we can therefore schedule ourselves out of the stop_machine where the suspend/resume takes place. This issue was introduced by 676dc3cf "xen: Use IRQF_FORCE_RESUME". Back ported to 2.6.32 (which lacks syscore support) by calling the relavant resume function directly from sysdev_resume). v2: Fixed non-x86 build errors. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Link: http://lkml.kernel.org/r/1318713254.11016.52.camel@dagon.hellion.org.ukSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Chris Wilson authored
commit 7dcd2499 upstream ... and do the same for pread. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Chris Wilson authored
commit ce9d419d upstream. Move the access control up from the fast paths, which are no longer universally taken first, up into the caller. This then duplicates some sanity checking along the slow paths, but is much simpler. Tracked as CVE-2010-2962. Reported-by:
Kees Cook <kees@ubuntu.com> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
This reverts commit fdb1e4e9. It was wrong included in 2.6.32 stable (was intended for 2.6.38+ in the original commit changelog in Linus tree), and causes a regression on 2.6.32 (https://launchpad.net/bugs/875300). Signed-off-by:
Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 55fe25b4 upstream. This example file uses the old V4L1 API. It also doesn't use libv4l. So, it is completely obsolete. A good example already exists at v4l-utils (v4l2grab.c): http://git.linuxtv.org/v4l-utils.gitReviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
NeilBrown authored
commit 9a3f530f upstream. When the number of failed devices exceeds the allowed number we must abort any active parity operations (checks or updates) as they are no longer meaningful, and can lead to a BUG_ON in handle_parity_checks6. This bug was introduce by commit 6c0069c0 in 2.6.29. Reported-by:
Manish Katiyar <mkatiyar@gmail.com> Tested-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Axel Lin authored
commit 5927f947 upstream. Reported-by:
Chris Paulson-Ellis <chris@edesix.com> Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Dave Jones authored
commit af0e5d56 upstream. Disable the new -Wunused-but-set-variable that was added in gcc 4.6.0 It produces more false positives than useful warnings. This can still be enabled using W=1 [gregkh - No it can not for 2.6.32, but we don't care] Signed-off-by:
Dave Jones <davej@redhat.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Tested-by:
-
Dan Carpenter authored
commit bc5b8a90 upstream. On a corrupted file system the ->len field could be wrong leading to a buffer overflow. Reported-and-acked-by:
Clement LECIGNE <clement.lecigne@netasq.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Carpenter authored
commit 528f7ce6 upstream. In enter_state() we use "state" as an offset for the pm_states[] array. The pm_states[] array only has PM_SUSPEND_MAX elements so this test is off by one. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Peter Wippich authored
commit bf514081 upstream. On writes in MODE_RAW the mtd_oob_ops struct is not sufficiently initialized which may cause nandwrite to fail. With this patch it is possible to write raw nand/oob data without additional ECC (either for testing or when some sectors need different oob layout e.g. bootloader) like nandwrite -n -r -o /dev/mtd0 <myfile> Signed-off-by:
Peter Wippich <pewi@gw-instruments.de> Tested-by:
Ricard Wanderlof <ricardw@axis.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
-
Johannes Berg authored
commit c30bc947 upstream. L2TP for example uses NLA_MSECS like this: policy: [L2TP_ATTR_RECV_TIMEOUT] = { .type = NLA_MSECS, }, code: if (info->attrs[L2TP_ATTR_RECV_TIMEOUT]) cfg.reorder_timeout = nla_get_msecs(info->attrs[L2TP_ATTR_RECV_TIMEOUT]); As nla_get_msecs() is essentially nla_get_u64() plus the conversion to a HZ-based value, this will not properly reject attributes from userspace that aren't long enough and might overrun the message. Add NLA_MSECS to the attribute minlen array to check the size properly. Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
NeilBrown authored
commit dc6f55e9 upstream. The sunrpc layer keeps a cache of recently used credentials and 'unx_match' is used to find the credential which matches the current process. However unx_match allows a match when the cached credential has extra groups at the end of uc_gids list which are not in the process group list. So if a process with a list of (say) 4 group accesses a file and gains access because of the last group in the list, then another process with the same uid and gid, and a gid list being the first tree of the gids of the original process tries to access the file, it will be granted access even though it shouldn't as the wrong rpc credential will be used. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Bart Van Assche authored
commit 3308511c upstream. Make sure that SCSI device removal via scsi_remove_host() does finish all pending SCSI commands. Currently that's not the case and hence removal of a SCSI host during I/O can cause a deadlock. See also "blkdev_issue_discard() hangs forever if underlying storage device is removed" (http://bugzilla.kernel.org/show_bug.cgi?id=40472). See also http://lkml.org/lkml/2011/8/27/6. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Petr Uzel authored
commit c68bf8ee upstream. The call to complete() in st_scsi_execute_end() wakes up sleeping thread in write_behind_check(), which frees the st_request, thus invalidating the pointer to the associated bio structure, which is then passed to the blk_rq_unmap_user(). Fix by storing pointer to bio structure into temporary local variable. This bug is present since at least linux-2.6.32. Signed-off-by:
Petr Uzel <petr.uzel@suse.cz> Reported-by:
Juergen Groß <juergen.gross@ts.fujitsu.com> Reviewed-by:
Jan Kara <jack@suse.cz> Acked-by:
Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
- 09 Nov, 2011 4 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 1badd98e. It breaks the build on powerpc systems: arch/powerpc/sysdev/mpic.c: In function 'irq_choose_cpu': arch/powerpc/sysdev/mpic.c:574: error: passing argument 1 of '__cpus_equal' from incompatible pointer type Reported-by:
Jiri Slaby <jslaby@suse.cz> Cc: Jiajun Wu <b06378@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit d85b1ce7. It breaks the build and probably shouldn't be in the 2.6.32 kernel Reported-by:
Stefan Bader <stefan.bader@canonical.com> Cc: Chris Paulson-Ellis <chris@edesix.com> Cc: Axel Lin <axel.lin@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 0f12a6ad. It causes too many build errors and needs to be done properly. Reported-by:
Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
- 07 Nov, 2011 16 commits
-
-
Greg Kroah-Hartman authored
-
Artur Zimmer authored
commit ce7e9065 upstream. Here is a patch for a new PID (zeitcontrol-device mifare-reader FT232BL(like FT232BM but lead free)). Signed-off-by:
Artur Zimmer <artur128@3dzimmer.de> Signed-off-by:
-
Florian Echtler authored
commit 2f1def26 upstream. A new device ID pair is added for Sierra Wireless MC8305. Signed-off-by:
Florian Echtler <floe@butterbrot.org> Signed-off-by:
-
Theodore Ts'o authored
commit 1cd9f097 upstream. This doesn't make much sense, and it exposes a bug in the kernel where attempts to create a new file in an append-only directory using O_CREAT will fail (but still leave a zero-length file). This was discovered when xfstests #79 was generalized so it could run on all file systems. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Alexandre Bounine authored
commit e0c87bd9 upstream. Modify Ethernet addess macros to be compatible with BE/LE platforms Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Chul Kim <chul.kim@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Zheng Liu authored
Does not corrispond with a direct commit in Linus's tree as it was fixed differently in the 3.0 release. We will meet with a BUG_ON() if following script is run. mkfs.ext4 -b 4096 /dev/sdb1 1000000 mount -t ext4 /dev/sdb1 /mnt/sdb1 fallocate -l 100M /mnt/sdb1/test sync for((i=0;i<170;i++)) do dd if=/dev/zero of=/mnt/sdb1/test conv=notrunc bs=256k count=1 seek=`expr $i \* 2` done umount /mnt/sdb1 mount -t ext4 /dev/sdb1 /mnt/sdb1 dd if=/dev/zero of=/mnt/sdb1/test conv=notrunc bs=256k count=1 seek=341 umount /mnt/sdb1 mount /dev/sdb1 /mnt/sdb1 dd if=/dev/zero of=/mnt/sdb1/test conv=notrunc bs=256k count=1 seek=340 sync The reason is that it forgot to mark dirty when splitting two extents in ext4_ext_convert_to_initialized(). Althrough ex has been updated in memory, it is not dirtied both in ext4_ext_convert_to_initialized() and ext4_ext_insert_extent(). The disk layout is corrupted. Then it will meet with a BUG_ON() when writting at the start of that extent again. Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Xiaoyun Mao <xiaoyun.maoxy@aliyun-inc.com> Cc: Yingbin Wang <yingbin.wangyb@aliyun-inc.com> Cc: Jia Wan <jia.wanj@aliyun-inc.com> Signed-off-by:Zheng Liu <wenqing.lz@taobao.com> Signed-off-by:
-
Eric Dumazet authored
commit 53b0f080 upstream. Ben Pfaff reported a kernel oops and provided a test program to reproduce it. https://kerneltrap.org/mailarchive/linux-netdev/2010/5/21/6277805 tc_fill_qdisc() should not be called for builtin qdisc, or it dereference a NULL pointer to get device ifindex. Fix is to always use tc_qdisc_dump_ignore() before calling tc_fill_qdisc(). Reported-by:
Ben Pfaff <blp@nicira.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Luciano Coelho authored
commit 57a27e1d upstream. When one of the SSID's length passed in a scan or sched_scan request is larger than 255, there will be an overflow in the u8 that is used to store the length before checking. This causes the check to fail and we overrun the buffer when copying the SSID. Fix this by checking the nl80211 attribute length before copying it to the struct. This is a follow up for the previous commit 208c72f4, which didn't fix the problem entirely. Reported-by:
Ido Yariv <ido@wizery.com> Signed-off-by:
Luciano Coelho <coelho@ti.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Dan Rosenberg authored
commit 7ac28817 upstream. A remote user can provide a small value for the command size field in the command header of an l2cap configuration request, resulting in an integer underflow when subtracting the size of the configuration request header. This results in copying a very large amount of data via memcpy() and destroying the kernel heap. Check for underflow. Signed-off-by:
Dan Rosenberg <drosenberg@vsecurity.com> Signed-off-by:
Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by:
-
Hugh Dickins authored
commit 42c36f63 upstream. Commit a626ca6a ("vm: fix vm_pgoff wrap in stack expansion") fixed the case of an expanding mapping causing vm_pgoff wrapping when you had downward stack expansion. But there was another case where IA64 and PA-RISC expand mappings: upward expansion. This fixes that case too. Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Linus Torvalds authored
commit a626ca6a upstream. Commit 982134ba ("mm: avoid wrapping vm_pgoff in mremap()") fixed the case of a expanding mapping causing vm_pgoff wrapping when you used mremap. But there was another case where we expand mappings hiding in plain sight: the automatic stack expansion. This fixes that case too. This one also found by Robert Święcki, using his nasty system call fuzzer tool. Good job. Reported-and-tested-by:
Robert Święcki <robert@swiecki.net> Signed-off-by:
-
Filip Palian authored
commit 8d03e971 upstream. Structures "l2cap_conninfo" and "rfcomm_conninfo" have one padding byte each. This byte in "cinfo" is copied to userspace uninitialized. Signed-off-by:
Filip Palian <filip.palian@pjwstk.edu.pl> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Trond Myklebust authored
commit 0b760113 upstream. If the NLM daemon is killed on the NFS server, we can currently end up hanging forever on an 'unlock' request, instead of aborting. Basically, if the rpcbind request fails, or the server keeps returning garbage, we really want to quit instead of retrying. Tested-by:
Vasily Averin <vvs@sw.ru> Signed-off-by:
-
Al Viro authored
commit a9712bc1 upstream. All of those are rw-r--r-- and all are broken for suid - if you open a file before the target does suid-root exec, you'll be still able to access it. For personality it's not a big deal, but for syscall and stack it's a real problem. Fix: check that task is tracable for you at the time of read(). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Eric Dumazet authored
commit bba14de9 upstream. Lower SCM_MAX_FD from 255 to 253 so that allocations for scm_fp_list are halved. (commit f8d570a4 added two pointers in this structure) scm_fp_dup() should not copy whole structure (and trigger kmemcheck warnings), but only the used part. While we are at it, only allocate needed size. Signed-off-by:
-
Manoj Iyer authored
commit 9fbdaeb4 upstream. The newer Lenovo ThinkPads have HKEY HID of LEN0068 instead of IBM0068. Added new HID so that thinkpad_acpi module will auto load on these newer Lenovo ThinkPads. Acked-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: stable@vger.kernel.org Signed-off-by:
Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by:
Andy Lutomirski <luto@mit.edu> Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
