- 01 Jul, 2019 1 commit
-
-
Yue Hu authored
We should consider the error returned by fill_inline_data() when filling last page in fill_inode(). If not getting inode will be successful even though last page is bad. That is illogical. Also change -EAGAIN to 0 in fill_inline_data() to stand for successful filling. Signed-off-by:
Yue Hu <huyue2@yulong.com> Reviewed-by:
Gao Xiang <gaoxiang25@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 28 Jun, 2019 1 commit
-
-
Arnd Bergmann authored
An earlier patch I sent reduced the stack usage enough to get below the warning limit, and I could show this was safe, but with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, it gets worse again because large stack variables in the same function no longer overlap: drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'translate_scan.isra.2': drivers/staging/rtl8712/rtl871x_ioctl_linux.c:322:1: error: the frame size of 1200 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Split out the largest two blocks in the affected function into two separate functions and mark those noinline_for_stack. Fixes: 8c5af16f ("staging: rtl8712: reduce stack usage") Fixes: 81a56f6d ("gcc-plugins: structleak: Generalize to all variable types") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 26 Jun, 2019 38 commits
-
-
Nishka Dasgupta authored
Change return values of function r8712_setrfreg_cmd from _SUCCESS/_FAIL to 0/-ENOMEM respectively. Modify call site accordingly. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
-
Nishka Dasgupta authored
Remove function r8712_setassocsta_cmd as it is only called by mp_start_joinbss, which was removed in the previous patch. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function mp_start_joinbss. Signed-off-by:
-
Nishka Dasgupta authored
Remove function r8712_find_network as all it does is call _r8712_find_network. Rename _r8712_find_network to r8712_find_network for compatibility with call sites. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function r8712_setrttbl_cmd. Signed-off-by:
-
Nishka Dasgupta authored
Remove function r8712_free_evt_priv as all it does is call _free_evt_priv. Rename _free_evt_priv to r8712_free_evt_priv to maintain compatibility with call sites. Change type of new r8712_free_evt_priv from static to non-static to match old definition. Signed-off-by:
-
Nishka Dasgupta authored
Remove function r8712_free_cmd_priv as all it does is call _free_cmd_priv. Change type of new r8712_free_cmd_priv from static to non-static to match definition of original r8712_free_cmd_priv. Signed-off-by:
-
Nishka Dasgupta authored
Change return values of the function r8712_init_evt_priv from _SUCCESS/_FAIL to 0/-ENOMEM. Modify call site accordingly. Signed-off-by:
-
Nishka Dasgupta authored
Remove function r8712_init_evt_priv as all it does is call _init_evt_priv. Rename _init_evt_priv to r8712_init_evt_priv to maintain compatibility with call sites. Change type of new r8712_init_evt_priv from static to non-static as original r8712_init_evt_priv was non-static. Change return type of new r8712_init_evt_priv to int as original had return type u32 but new (formerly _init_evt_priv) had return type sint. Signed-off-by:
-
Nishka Dasgupta authored
Change return values in r8712_init_cmd_priv from _SUCCESS/_FAIL to 0/-ENOMEM. Modify call site accordingly. Signed-off-by:
-
Nishka Dasgupta authored
Remove function block_resume as it was only called by vchiq_arm_force_suspend, which was removed in a previous patch. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove function output_timeout_error as it was only called by vchiq_arm_force_suspend, which was deleted in a previous patch. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function vchiq_send_remote_release. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function vchiq_use_service_no_resume. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function vchiq_resume_internal. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function vchiq_pause_internal. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function vchiq_arm_force_suspend. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function vchiq_arm_allow_resume. Issue found with Coccinelle. Signed-off-by:
-
Nishka Dasgupta authored
Remove unused function vchiu_queue_is_full. Issue found with Coccinelle. Signed-off-by:
-
Simon Sandström authored
Fixes checkpatch errors: - spaces required around that '=' (ctx:VxV) - space required before the open parenthesis '(' - spaces preferred around that '-' (ctx:VxV) - space required before the open brace '{' Signed-off-by:Simon Sandström <simon@nikanor.nu> Signed-off-by:
-
Simon Sandström authored
Fixes checkpatch "CHECK: spaces preferred around that '+' (ctx:VxV)". Signed-off-by:
-
Michael Straube authored
Function is_ap_in_wep() is not used in the driver code, so remove it. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Signed-off-by:
-
Michael Straube authored
Function get_bsstype() is not used in the driver code, so remove it. Signed-off-by:
-
Shobhit Kukreti authored
rtw_init_default_value() func always returns a value (u8)_SUCCESS. Modified return type to void to resolve coccicheck warnings of unneeded variable. Signed-off-by:
Shobhit Kukreti <shobhitkukreti@gmail.com> Signed-off-by:
-
Shobhit Kukreti authored
Changed return type of function rtw_suspend_wow() to void. The function always return _SUCCESS and the value is never checked in the calling function. Resolves coccicheck Unneeded variable "ret" warning. Signed-off-by:
-
Shobhit Kukreti authored
Coccicheck issues Unneeded variable "ret" warning. The return value of function rtw_suspend_normal() is set to _SUCCESS. The return value is never never checked by the calling function. Modified return type to void to remove the coccicheck warning.. Signed-off-by:
-
Shobhit Kukreti authored
The function rtw_reset_drv_sw() return value is set to _SUCCESS. The return value is never checked when the function is called. Modified the return value to void to remove "Unneeded Variable warning of coccicheck. Signed-off-by:
-
Shobhit Kukreti authored
The function static uint loadparam(struct adapter *padapter, _nic_hdl pnetdev) return type is modified to void. The initial return value was always returning _SUCCESS and the return value is never checked when the function is called. This resolves coccicheck warnings of unneeded variables. Signed-off-by:
-
Michael Straube authored
Function hal_init_macaddr() just calls rtw_hal_set_hwreg(). Use rtw_hal_set_hwreg() directly and remove hal_init_macaddr(). Signed-off-by:
-
Michael Straube authored
Cleanup checkpatch issues in usb_halinit.c. CHECK: Lines should not end with a '(' Signed-off-by: -
Gao Xiang authored
Decompressor needs to know whether it's a partial or full decompression since only full decompression can be decompressed in-place. On kirin980 platform, sequential read is finally increased to 812MiB/s after decompression inplace is enabled. Reviewed-by:
-
Gao Xiang authored
This patch integrates new decompression framework to erofs decompression path, and remove the old decompression implementation as well. On kirin980 platform, sequential read is slightly improved to 778MiB/s after the new decompression backend is used. Reviewed-by:
-
Gao Xiang authored
compressed data will be usually loaded into last pages of the extent (the last page for 4k) for in-place decompression (more specifically, in-place IO), as ilustration below, start of compressed logical extent | end of this logical extent | | ______v___________________________v________ ... | page 6 | page 7 | page 8 | page 9 | ... |__________|__________|__________|__________| . ^ . ^ . |compressed| . | data | . . . |< dstsize >|<margin>| oend iend op ip Therefore, it's possible to do decompression inplace (thus no memcpy at all) if the margin is sufficient and safe enough [1], and it can be implemented only for fixed-size output compression compared with fixed-size input compression. No memcpy for most of in-place IO (about 99% of enwik9) after decompression inplace is implemented and sequential read will be improved of course (see the following patches for test results). [1] https://github.com/lz4/lz4/commit/b17f578a919b7e6b078cede2d52be29dd48c8e8c https://github.com/lz4/lz4/commit/5997e139f53169fa3a1c1b4418d2452a90b01602Reviewed-by: -
Gao Xiang authored
This patch adds a new generic decompression framework in order to replace the old LZ4-specific decompression code. Even though LZ4 is still the only supported algorithm, yet it is more cleaner and easy to integrate new algorithm than the old almost hard-coded decompression backend. Reviewed-by:
-
Gao Xiang authored
stagingpages are behaved as bounce pages for temporary use. Move to compress.h since the upcoming decompressor will allocate stagingpages as well. Reviewed-by:
-
Gao Xiang authored
This patch moves per-CPU buffers to utils.c in order for the upcoming generic decompression framework to use it. Note that I tried to use generic per-CPU buffer or per-CPU page approaches to clean up further, but obvious performanace regression (about 2% for sequential read) was observed. Therefore let's leave it as it is instead, just move to utils.c and I'll try to dig into the root cause later. Signed-off-by:
-
Gao Xiang authored
This patch aims at compacted compression indexes: 1) cleanup z_erofs_map_blocks_iter and move into zmap.c; 2) add compacted 4/2B decoding support. On kirin980 platform, sequential read is increased about 6% (725MiB/s -> 770MiB/s) on enwik9 dataset if compacted 2B feature is enabled. Reviewed-by:
-
Gao Xiang authored
This patch introduces new compacted compression indexes. In contract to legacy compression indexes that each 4k logical cluster has an 8-byte index, compacted ondisk compression indexes will have amortized 2 bytes for each 4k logical cluster (compacted 2B) amortized 4 bytes for each 4k logical cluster (compacted 4B) In detail, several continuous clusters will be encoded in a compacted pack with cluster types, offsets, and one blkaddr at the end of the pack to leave 4-byte margin for better decoding performance, as illustrated below: _____________________________________________ |___@_____ encoded bits __________|_ blkaddr _| 0 . amortized * vcnt . . . . amortized * vcnt - 4 . . .___________________. |_type_|_clusterofs_| Note that compacted 2 / 4B should be aligned with 32 / 8 bytes in order to avoid each pack crossing page boundary. Reviewed-by:
-
