- 10 Jan, 2022 1 commit
-
-
Rafael J. Wysocki authored
Merge cpufreq updates for 5.17-rc1: - Add new P-state driver for AMD processors (Huang Rui). - Fix initialization of min and max frequency QoS requests in the cpufreq core (Rafael Wysocki). - Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada). - Make intel_pstate update cpuinfo.max_freq when notified of HWP capabilities changes and drop a redundant function call from that driver (Rafael Wysocki). - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel, Stephen Boyd, Vladimir Zapolskiy). - Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan). - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz Luba). - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman). * pm-cpufreq: (32 commits) x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment MAINTAINERS: Add AMD P-State driver maintainer entry Documentation: amd-pstate: Add AMD P-State driver introduction cpufreq: amd-pstate: Add AMD P-State performance attributes cpufreq: amd-pstate: Add AMD P-State frequencies attributes cpufreq: amd-pstate: Add boost mode support for AMD P-State cpufreq: amd-pstate: Add trace for AMD P-State module cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution cpufreq: amd-pstate: Add fast switch function for AMD P-State cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors ACPI: CPPC: Add CPPC enable register function ACPI: CPPC: Check present CPUs for determining _CPC is valid ACPI: CPPC: Implement support for SystemIO registers x86/msr: Add AMD CPPC MSR definitions x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag cpufreq: use default_groups in kobj_type cpufreq: mediatek-hw: Fix double devm_remap in hotplug case cpufreq: intel_pstate: Update cpuinfo.max_freq on HWP_CAP changes ...
-
- 06 Jan, 2022 3 commits
-
-
Huang Rui authored
The init_freq_invariance_cppc function is implemented in smpboot and depends on CONFIG_SMP. MODPOST vmlinux.symvers MODINFO modules.builtin.modinfo GEN modules.builtin LD .tmp_vmlinux.kallsyms1 ld: drivers/acpi/cppc_acpi.o: in function `acpi_cppc_processor_probe': /home/ray/brahma3/linux/drivers/acpi/cppc_acpi.c:819: undefined reference to `init_freq_invariance_cppc' make: *** [Makefile:1161: vmlinux] Error 1 See https://lore.kernel.org/lkml/484af487-7511-647e-5c5b-33d4429acdec@infradead.org/. Fixes: 41ea6672 ("x86, sched: Calculate frequency invariance for AMD systems") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Huang Rui <ray.huang@amd.com> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Huang Rui authored
The AMD P-State driver is based on ACPI CPPC function, so ACPI should be dependence of this driver in the kernel config. In file included from ../drivers/cpufreq/amd-pstate.c:40:0: ../include/acpi/processor.h:226:2: error: unknown type name ‘phys_cpuid_t’ phys_cpuid_t phys_id; /* CPU hardware ID such as APIC ID for x86 */ ^~~~~~~~~~~~ ../include/acpi/processor.h:355:1: error: unknown type name ‘phys_cpuid_t’; did you mean ‘phys_addr_t’? phys_cpuid_t acpi_get_phys_id(acpi_handle, int type, u32 acpi_id); ^~~~~~~~~~~~ phys_addr_t CC drivers/rtc/rtc-rv3029c2.o ../include/acpi/processor.h:356:1: error: unknown type name ‘phys_cpuid_t’; did you mean ‘phys_addr_t’? phys_cpuid_t acpi_map_madt_entry(u32 acpi_id); ^~~~~~~~~~~~ phys_addr_t ../include/acpi/processor.h:357:20: error: unknown type name ‘phys_cpuid_t’; did you mean ‘phys_addr_t’? int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id); ^~~~~~~~~~~~ phys_addr_t See https://lore.kernel.org/lkml/20e286d4-25d7-fb6e-31a1-4349c805aae3@infradead.org/. Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Huang Rui <ray.huang@amd.com> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Yang Li authored
Add the description of @req and @boost_supported in struct amd_cpudata kernel-doc comment to remove warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/cpufreq/amd-pstate.c:104: warning: Function parameter or member 'req' not described in 'amd_cpudata' drivers/cpufreq/amd-pstate.c:104: warning: Function parameter or member 'boost_supported' not described in 'amd_cpudata' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 04 Jan, 2022 1 commit
-
-
Srinivas Pandruvada authored
The current EPB "normal" is defined as 6 and set whenever power-up EPB value is 0. This setting resulted in the desired out of box power and performance for several CPU generations. But this value is not suitable for AlderLake mobile CPUs, as this resulted in higher uncore power. Since EPB is model specific, this is not unreasonable to have different behavior. Allow a capability where "normal" EPB can be redefined. For AlderLake mobile CPUs this desired normal value is 7. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 02 Jan, 2022 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix TUI exit screen refresh race condition in 'perf top'. - Fix parsing of Intel PT VM time correlation arguments. - Honour CPU filtering command line request of a script's switch events in 'perf script'. - Fix printing of switch events in Intel PT python script. - Fix duplicate alias events list printing in 'perf list', noticed on heterogeneous arm64 systems. - Fix return value of ids__new(), users expect NULL for failure, not ERR_PTR(-ENOMEM). * tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf top: Fix TUI exit screen refresh race condition perf pmu: Fix alias events list perf scripts python: intel-pt-events.py: Fix printing of switch events perf script: Fix CPU filtering of a script's switch events perf intel-pt: Fix parsing of VM time correlation arguments perf expr: Fix return value of ids__new()
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Better input validation for compat ioctls and a documentation bugfix for 5.16" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Docs: Fixes link to I2C specification i2c: validate user data in compat ioctl
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Borislav Petkov: - Use the proper CONFIG symbol in a preprocessor check. * tag 'x86_urgent_for_v5.16_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Use the proper name CONFIG_FW_LOADER
-
yaowenbin authored
When the following command is executed several times, a coredump file is generated. $ timeout -k 9 5 perf top -e task-clock ******* ******* ******* 0.01% [kernel] [k] __do_softirq 0.01% libpthread-2.28.so [.] __pthread_mutex_lock 0.01% [kernel] [k] __ll_sc_atomic64_sub_return double free or corruption (!prev) perf top --sort comm,dso timeout: the monitored command dumped core When we terminate "perf top" using sending signal method, SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen management routines by freeing all memory allocated while it was active. However SLsmg_reinit_smg() maybe be called by another thread. SLsmg_reinit_smg() will free the same memory accessed by SLsmg_reset_smg(), thus it results in a double free. SLsmg_reinit_smg() is called already protected by ui__lock, so we fix the problem by adding pthread_mutex_trylock of ui__lock when calling SLsmg_reset_smg(). Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: wuxu.wu@huawei.com Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.comSigned-off-by: Hewenliang <hewenliang4@huawei.com> Signed-off-by: yaowenbin <yaowenbin1@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Commit 0e0ae874 ("perf list: Display hybrid PMU events with cpu type") changes the event list for uncore PMUs or arm64 heterogeneous CPU systems, such that duplicate aliases are incorrectly listed per PMU (which they should not be), like: # perf list ... unc_cbo_cache_lookup.any_es [Unit: uncore_cbox L3 Lookup any request that access cache and found line in E or S-state] unc_cbo_cache_lookup.any_es [Unit: uncore_cbox L3 Lookup any request that access cache and found line in E or S-state] unc_cbo_cache_lookup.any_i [Unit: uncore_cbox L3 Lookup any request that access cache and found line in I-state] unc_cbo_cache_lookup.any_i [Unit: uncore_cbox L3 Lookup any request that access cache and found line in I-state] ... Notice how the events are listed twice. The named commit changed how we remove duplicate events, in that events for different PMUs are not treated as duplicates. I suppose this is to handle how "Each hybrid pmu event has been assigned with a pmu name". Fix PMU alias listing by restoring behaviour to remove duplicates for non-hybrid PMUs. Fixes: 0e0ae874 ("perf list: Display hybrid PMU events with cpu type") Signed-off-by: John Garry <john.garry@huawei.com> Tested-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
- 01 Jan, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "Two small fixups for spaceball joystick driver and appletouch touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: spaceball - fix parsing of movement data packets Input: appletouch - initialize work before device registration
-
- 31 Dec, 2021 12 commits
-
-
Mel Gorman authored
Hugh Dickins reported the following My tmpfs swapping load (tweaked to use huge pages more heavily than in real life) is far from being a realistic load: but it was notably slowed down by your throttling mods in 5.16-rc, and this patch makes it well again - thanks. But: it very quickly hit NULL pointer until I changed that last line to if (first_pgdat) consider_reclaim_throttle(first_pgdat, sc); The likely issue is that huge pages are a major component of the test workload. When this is the case, first_pgdat may never get set if compaction is ready to continue due to this check if (IS_ENABLED(CONFIG_COMPACTION) && sc->order > PAGE_ALLOC_COSTLY_ORDER && compaction_ready(zone, sc)) { sc->compaction_ready = true; continue; } If this was true for every zone in the zonelist, first_pgdat would never get set resulting in a NULL pointer exception. Link: https://lkml.kernel.org/r/20211209095453.GM3366@techsingularity.net Fixes: 1b4e3f26 ("mm: vmscan: Reduce throttling due to a failure to make progress") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@surriel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mel Gorman authored
Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar problems due to reclaim throttling for excessive lengths of time. In Alexey's case, a memory hog that should go OOM quickly stalls for several minutes before stalling. In Mike and Darrick's cases, a small memcg environment stalled excessively even though the system had enough memory overall. Commit 69392a40 ("mm/vmscan: throttle reclaim when no progress is being made") introduced the problem although commit a19594ca ("mm/vmscan: increase the timeout if page reclaim is not making progress") made it worse. Systems at or near an OOM state that cannot be recovered must reach OOM quickly and memcg should kill tasks if a memcg is near OOM. To address this, only stall for the first zone in the zonelist, reduce the timeout to 1 tick for VMSCAN_THROTTLE_NOPROGRESS and only stall if the scan control nr_reclaimed is 0, kswapd is still active and there were excessive pages pending for writeback. If kswapd has stopped reclaiming due to excessive failures, do not stall at all so that OOM triggers relatively quickly. Similarly, if an LRU is simply congested, only lightly throttle similar to NOPROGRESS. Alexey's original case was the most straight forward for i in {1..3}; do tail /dev/zero; done On vanilla 5.16-rc1, this test stalled heavily, after the patch the test completes in a few seconds similar to 5.15. Alexey's second test case added watching a youtube video while tail runs 10 times. On 5.15, playback only jitters slightly, 5.16-rc1 stalls a lot with lots of frames missing and numerous audio glitches. With this patch applies, the video plays similarly to 5.15. [lkp@intel.com: Fix W=1 build warning] Link: https://lore.kernel.org/r/99e779783d6c7fce96448a3402061b9dc1b3b602.camel@gmx.de Link: https://lore.kernel.org/r/20211124011954.7cab9bb4@mail.inbox.lv Link: https://lore.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net Link: https://lore.kernel.org/r/20211202150614.22440-1-mgorman@techsingularity.net Link: https://linux-regtracking.leemhuis.info/regzbot/regression/20211124011954.7cab9bb4@mail.inbox.lv/Reported-and-tested-by: Alexey Avramov <hakavlad@inbox.lv> Reported-and-tested-by: Mike Galbraith <efault@gmx.de> Reported-and-tested-by: Darrick J. Wong <djwong@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Tracked-by: Thorsten Leemhuis <regressions@leemhuis.info> Fixes: 69392a40 ("mm/vmscan: throttle reclaim when no progress is being made") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge misc mm fixes from Andrew Morton: "2 patches. Subsystems affected by this patch series: mm (userfaultfd and damon)" * akpm: mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()' userfaultfd/selftests: fix hugetlb area allocations
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Three fixes, all in drivers. The lpfc one doesn't look exploitable, but nasty things could happen in string operations if mybuf ends up with an on stack unterminated string" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: vmw_pvscsi: Set residual data length conditionally scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown() scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
-
SeongJae Park authored
DAMON debugfs interface increases the reference counts of 'struct pid's for targets from the 'target_ids' file write callback ('dbgfs_target_ids_write()'), but decreases the counts only in DAMON monitoring termination callback ('dbgfs_before_terminate()'). Therefore, when 'target_ids' file is repeatedly written without DAMON monitoring start/termination, the reference count is not decreased and therefore memory for the 'struct pid' cannot be freed. This commit fixes this issue by decreasing the reference counts when 'target_ids' is written. Link: https://lkml.kernel.org/r/20211229124029.23348-1-sj@kernel.org Fixes: 4bc05954 ("mm/damon: implement a debugfs-based user space interface") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [5.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Kravetz authored
Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh or any environment where there are 'just enough' hugetlb pages will always fail with: testing events (fork, remap, remove): ERROR: UFFDIO_COPY error: -12 (errno=12, line=616) The ENOMEM error code implies there are not enough hugetlb pages. However, there are free hugetlb pages but they are all reserved. There is a basic problem with the way the test allocates hugetlb pages which has existed since the test was originally written. Due to the way 'cleanup' was done between different phases of the test, this issue was masked until recently. The issue was uncovered by commit 8ba6e864 ("userfaultfd/selftests: reinitialize test context in each test"). For the hugetlb test, src and dst areas are allocated as PRIVATE mappings of a hugetlb file. This means that at mmap time, pages are reserved for the src and dst areas. At the start of event testing (and other tests) the src area is populated which results in allocation of huge pages to fill the area and consumption of reserves associated with the area. Then, a child is forked to fault in the dst area. Note that the dst area was allocated in the parent and hence the parent owns the reserves associated with the mapping. The child has normal access to the dst area, but can not use the reserves created/owned by the parent. Thus, if there are no other huge pages available allocation of a page for the dst by the child will fail. Fix by not creating reserves for the dst area. In this way the child can use free (non-reserved) pages. Also, MAP_PRIVATE of a file only makes sense if you are interested in the contents of the file before making a COW copy. The test does not do this. So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous hugetlb mapping. There is no need to create a hugetlb file in the non-shared case. Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Deep Majumder authored
The link to the I2C specification is broken. Although "https://www.nxp.com" hosts Rev 7 (2021) of this specification, it is behind a login-wall. Thus, an additional link has been added (which doesn't require a login) and the NXP official docs link has been updated. Signed-off-by: Deep Majumder <deep@fastmail.in> [wsa: minor updates to text and commit message] Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Pavel Skripkin authored
Wrong user data may cause warning in i2c_transfer(), ex: zero msgs. Userspace should not be able to trigger warnings, so this patch adds validation checks for user data in compact ioctl to prevent reported warnings Reported-and-tested-by: syzbot+e417648b303855b91d8a@syzkaller.appspotmail.com Fixes: 7d5cb456 ("i2c compat ioctls: move to ->compat_ioctl()") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-
Leo L. Schwab authored
The spaceball.c module was not properly parsing the movement reports coming from the device. The code read axis data as signed 16-bit little-endian values starting at offset 2. In fact, axis data in Spaceball movement reports are signed 16-bit big-endian values starting at offset 3. This was determined first by visually inspecting the data packets, and later verified by consulting: http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf If this ever worked properly, it was in the time before Git... Signed-off-by: Leo L. Schwab <ewhac@ewhac.org> Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Pavel Skripkin authored
Syzbot has reported warning in __flush_work(). This warning is caused by work->func == NULL, which means missing work initialization. This may happen, since input_dev->close() calls cancel_work_sync(&dev->work), but dev->work initalization happens _after_ input_register_device() call. So this patch moves dev->work initialization before registering input device Fixes: 5a6eb676 ("Input: appletouch - improve powersaving for Geyser3 devices") Reported-and-tested-by: syzbot+b88c5eae27386b252bbd@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20211230141151.17300-1-paskripkin@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This is a bit bigger than I'd like, however it has two weeks of amdgpu fixes in it, since they missed last week, which was very small. The nouveau regression is probably the biggest fix in here, and it needs to go into 5.15 as well, two i915 fixes, and then a scattering of amdgpu fixes. The biggest fix in there is for a fencing NULL pointer dereference, the rest are pretty minor. For the misc team, I've pulled the two misc fixes manually since I'm not sure what is happening at this time of year! The amdgpu maintainers have the outstanding runpm regression to fix still, they are just working through the last bits of it now. Summary: nouveau: - fencing regression fix i915: - Fix possible uninitialized variable - Fix composite fence seqno icrement on each fence creation amdgpu: - Fencing fix - XGMI fix - VCN regression fix - IP discovery regression fixes - Fix runpm documentation - Suspend/resume fixes - Yellow Carp display fixes - MCLK power management fix - dma-buf fix" * tag 'drm-fixes-2021-12-31' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Changed pipe split policy to allow for multi-display pipe split drm/amd/display: Fix USB4 null pointer dereference in update_psp_stream_config drm/amd/display: Set optimize_pwr_state for DCN31 drm/amd/display: Send s0i2_rdy in stream_count == 0 optimization drm/amd/display: Added power down for DCN10 drm/amd/display: fix B0 TMDS deepcolor no dislay issue drm/amdgpu: no DC support for headless chips drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform drm/amdgpu: always reset the asic in suspend (v2) drm/amd/pm: skip setting gfx cgpg in the s0ix suspend-resume drm/i915: Increment composite fence seqno drm/i915: Fix possible uninitialized variable in parallel extension drm/amdgpu: fix runpm documentation drm/nouveau: wait for the exclusive fence after the shared ones v2 drm/amdgpu: add support for IP discovery gc_info table v2 drm/amdgpu: When the VCN(1.0) block is suspended, powergating is explicitly enabled drm/amd/pm: Fix xgmi link control on aldebaran drm/amdgpu: introduce new amdgpu_fence object to indicate the job embedded fence drm/amdgpu: fix dropped backing store handling in amdgpu_dma_buf_move_notify
-
ssh://git.freedesktop.org/git/drm/drm-miscDave Airlie authored
This merges two fixes that haven't been sent to me yet, but I wanted to get in. One amdgpu fix, but one nouveau regression fixer. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 30 Dec, 2021 16 commits
-
-
Christian Brauner authored
Make sure that finish_mount_kattr() is called after mount_kattr was succesfully built in both the success and failure case to prevent leaking any references we took when we built it. We returned early if path lookup failed thereby risking to leak an additional reference we took when building mount_kattr when an idmapped mount was requested. Cc: linux-fsdevel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 9caccd41 ("fs: introduce MOUNT_ATTR_IDMAP") Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from.. Santa? No regressions on our radar at this point. The igc problem fixed here was the last one I was tracking but it was broken in previous releases, anyway. Mostly driver fixes and a couple of largish SMC fixes. Current release - regressions: - xsk: initialise xskb free_list_node, fixup for a -rc7 fix Current release - new code bugs: - mlx5: handful of minor fixes: - use first online CPU instead of hard coded CPU - fix some error handling paths in 'mlx5e_tc_add_fdb_flow()' - fix skb memory leak when TC classifier action offloads are disabled - fix memory leak with rules with internal OvS port Previous releases - regressions: - igc: do not enable crosstimestamping for i225-V models Previous releases - always broken: - udp: use datalen to cap ipv6 udp max gso segments - fix use-after-free in tw_timer_handler due to early free of stats - smc: fix kernel panic caused by race of smc_sock - smc: don't send CDC/LLC message if link not ready, avoid timeouts - sctp: use call_rcu to free endpoint, avoid UAF in sock diag - bridge: mcast: add and enforce query interval minimum - usb: pegasus: do not drop long Ethernet frames - mlx5e: fix ICOSQ recovery flow for XSK - nfc: uapi: use kernel size_t to fix user-space builds" * tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) fsl/fman: Fix missing put_device() call in fman_port_probe selftests: net: using ping6 for IPv6 in udpgro_fwd.sh Documentation: fix outdated interpretation of ip_no_pmtu_disc net/ncsi: check for error return from call to nla_put_u32 net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper net: fix use-after-free in tw_timer_handler selftests: net: Fix a typo in udpgro_fwd.sh selftests/net: udpgso_bench_tx: fix dst ip argument net: bridge: mcast: add and enforce startup query interval minimum net: bridge: mcast: add and enforce query interval minimum ipv6: raw: check passed optlen before reading xsk: Initialise xskb free_list_node net/mlx5e: Fix wrong features assignment in case of error net/mlx5e: TC, Fix memory leak with rules with internal port ionic: Initialize the 'lif->dbid_inuse' bitmap igc: Fix TX timestamp support for non-MSI-X platforms igc: Do not enable crosstimestamping for i225-V models net/smc: fix kernel panic caused by race of smc_sock net/smc: don't send CDC/LLC message if link not ready NFC: st21nfca: Fix memory leak in device probe and remove ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Here are two misc driver fixes for 5.16-final: - binder accounting fix to resolve reported problem - nitro_enclaves fix for mmap assert warning output Both of these have been for over a week with no reported issues" * tag 'char-misc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert binder: fix async_free_space accounting for empty parcels
-
Huang Rui authored
I will continue to add new feature and processor support, optimize the performance, and handle the issues for AMD P-State driver. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Huang Rui authored
Introduce the AMD P-State driver design and implementation. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Huang Rui authored
Introduce sysfs attributes to get the different level AMD P-State performances. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Huang Rui authored
Introduce sysfs attributes to get the different level processor frequencies. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Huang Rui authored
If the sbios supports the boost mode of AMD P-State, let's switch to boost enabled by default. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Huang Rui authored
Add trace event to monitor the performance value changes which is controlled by cpu governors. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Huang Rui authored
In some of Zen2 and Zen3 based processors, they are using the shared memory that exposed from ACPI SBIOS. In this kind of the processors, there is no MSR support, so we add acpi cppc function as the backend for them. It is using a module param (shared_mem) to enable related processors manually. We will enable this by default once we address performance issue on this solution. Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Huang Rui authored
Introduce the fast switch function for AMD P-State on the AMD processors which support the full MSR register control. It's able to decrease the latency on interrupt context. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Huang Rui authored
AMD P-State is the AMD CPU performance scaling driver that introduces a new CPU frequency control mechanism on AMD Zen based CPU series in Linux kernel. The new mechanism is based on Collaborative processor performance control (CPPC) which is finer grain frequency management than legacy ACPI hardware P-States. Current AMD CPU platforms are using the ACPI P-states driver to manage CPU frequency and clocks with switching only in 3 P-states. AMD P-State is to replace the ACPI P-states controls, allows a flexible, low-latency interface for the Linux kernel to directly communicate the performance hints to hardware. AMD P-State leverages the Linux kernel governors such as *schedutil*, *ondemand*, etc. to manage the performance hints which are provided by CPPC hardware functionality. The first version for AMD P-State is to support one of the Zen3 processors, and we will support more in future after we verify the hardware and SBIOS functionalities. There are two types of hardware implementations for AMD P-State: one is full MSR support and another is shared memory support. It can use X86_FEATURE_CPPC feature flag to distinguish the different types. Using the new AMD P-State method + kernel governors (*schedutil*, *ondemand*, ...) to manage the frequency update is the most appropriate bridge between AMD Zen based hardware processor and Linux kernel, the processor is able to adjust to the most efficiency frequency according to the kernel scheduler loading. Please check the detailed CPU feature and MSR register description in Processor Programming Reference (PPR) for AMD Family 19h Model 51h, Revision A1 Processors: https://www.amd.com/system/files/TechDocs/56569-A1-PUB.zipSigned-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Jinzhou Su authored
Add a new function to enable CPPC feature. This function will write Continuous Performance Control package EnableRegister field on the processor. CPPC EnableRegister register described in section 8.4.7.1 of ACPI 6.4: This element is optional. If supported, contains a resource descriptor with a single Register() descriptor that describes a register to which OSPM writes a One to enable CPPC on this processor. Before this register is set, the processor will be controlled by legacy mechanisms (ACPI Pstates, firmware, etc.). This register will be used for AMD processors to enable AMD P-State function instead of legacy ACPI P-States. Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Mario Limonciello authored
As this is a static check, it should be based upon what is currently present on the system. This makes probeing more deterministic. While local APIC flags field (lapic_flags) of cpu core in MADT table is 0, then the cpu core won't be enabled. In this case, _CPC won't be found in this core, and return back to _CPC invalid with walking through possible cpus (include disable cpus). This is not expected, so switch to check present CPUs instead. Reported-by: Jinzhou Su <Jinzhou.Su@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Steven Noonan authored
According to the ACPI v6.2 (and later) specification, SystemIO can be used for _CPC registers. This teaches cppc_acpi how to handle such registers. This patch was tested using the amd_pstate driver on my Zephyrus G15 (model GA503QS) using the current version 410 BIOS, which uses a SystemIO register for the HighestPerformance element in _CPC. Signed-off-by: Steven Noonan <steven@valvesoftware.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Huang Rui authored
AMD CPPC (Collaborative Processor Performance Control) function uses MSR registers to manage the performance hints. So add the MSR register macro here. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-