This function has always been marked as __cpuinit, but is only called
from functions marked as __init and references an __initdata variable.
So change its annotation to __init.

Fixes this build warning:

WARNING: arch/powerpc/mm/built-in.o(.cpuinit.text+0x86): Section mismatch in reference from the function .fake_numa_create_new_node() to the variable .init.data:cmdline
The function __cpuinit .fake_numa_create_new_node() references
a variable __initdata cmdline.
If cmdline is only used by .fake_numa_create_new_node then
annotate cmdline with a matching annotation.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

The following commit breaks numa distance setup for old powerpc
systems that use form0 encoding in device tree.

commit 41eab6f8
powerpc/numa: Use form 1 affinity to setup node distance

Device tree node /rtas/ibm,associativity-reference-points would
index into /cpus/PowerPCxxxx/ibm,associativity based on form0 or
form1 encoding detected by ibm,architecture-vec-5 property.

All modern systems use form1 and current kernel code is correct.
However, on older systems with form0 encoding, the numa distance
will get hard coded as LOCAL_DISTANCE for all nodes.  This causes
task scheduling anomaly since scheduler will skip building numa
level domain (topmost domain with all cpus) if all numa distances
are same.  (value of 'level' in sched_init_numa() will remain 0)

Prior to the above commit:
((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)

Restoring compatible behavior with this patch for old powerpc systems
with device tree where numa distance are encoded as form0.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

This adds new debug feature information so that the DAWR can be
identified by userspace tools like GDB.

Unfortunately the DAWR doesn't sit nicely into the current description
that ptrace provides to userspace via struct ppc_debug_info.  It doesn't
allow for specifying that only some ranges are possible or even the end
alignment constraints (DAWR only allows 512 byte wide ranges which can't
cross a 512 byte boundary).

After talking to Edjunior Machado (GDB ppc developer), it was decided
this was the best approach.  Just mark it as debug feature DAWR and
tools like GDB can internally decide the constraints.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

This patch adds a new line to /proc/interrupts to account for the
doorbell interrupts that each hardware thread has received. The total
interrupt count in /proc/stat will now also include doorbells.

 # cat /proc/interrupts
           CPU0       CPU1       CPU2       CPU3
 16:        551       1267        281        175      XICS Level     IPI
LOC:       2037       1503       1688       1625   Local timer interrupts
SPU:          0          0          0          0   Spurious interrupts
CNT:          0          0          0          0   Performance monitoring interrupts
MCE:          0          0          0          0   Machine check exceptions
DBL:         42        550         20         91   Doorbell interrupts
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Given a PCI device with multiple functions in a DDW capable slot, the
following situation can be encountered: When the first function sets a
64-bit DMA mask, enable_ddw() will be called and we can fail to properly
configure DDW (the most common reason being the new DMA window's size is
not large enough to map all of an LPAR's memory). With the recent
changes to DDW, we remove the base window in order to determine if the
new window is of sufficient size to cover an LPAR's memory. We correctly
replace the base window if we find that not to be the case. However,
once we go through and re-configured 32-bit DMA via the IOMMU, the next
function of the adapter will go through the same process. And since DDW
is a characteristic of the slot itself, we are most likely going to fail
again. But to determine we are going to fail the second slot, we again
remove the base window -- but that is now in-use by the first
function/driver, which might be issuing I/O already.

To close this window, keep a list of all the failed struct device_nodes
that have failed to configure DDW. If the current device_node is in that
list, just fail out immediately and fall back to 32-bit DMA without
doing any DDW manipulation.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

As Michael Ellerman mentioned, arch/powerpc/sysdev/msi_bitmap.c
already implemented bitmap to manage (alloc/free) MSI interrupts.
The patch intends to use that mechanism to manage MSI interrupts
for PowerNV platform.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Setup the HFSCR (Hypervisor Facility Status and Control Register) for POWER8
when running HV=1.  The HFSCR is the same as the FSCR except it's for
hypervisors.  It controls the available of various facilities in OS and
userspace levels.  It also indicates the cause of a hypervisor facility
unavailable interrupt (although we are not using this here).

This patch sets the facilities Linux knows about incase the firmware doesn't.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Add SPR number and bit definitions for the HFSCR (Hypervisor Facility Status
and Control Register).
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Currently ptrace_get_reg returns error as a value
what make impossible to tell whether it is a correct value or error code.

The patch adds a parameter which points to the real return data and
returns an error code.

As get_user_msr() never fails and it is used in multiple places so it has not
been changed by this patch.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

This fixes these errors when building UP with CONFIG_KVM_BOOK3S_64_HV=y:

arch/powerpc/kvm/book3s_hv.c:1855:2: error: implicit declaration of function 'inhibit_secondary_onlining' [-Werror=implicit-function-declaration]
arch/powerpc/kvm/book3s_hv.c:1862:2: error: implicit declaration of function 'uninhibit_secondary_onlining' [-Werror=implicit-function-declaration]
cc1: all warnings being treated as errors

and this error (with CONFIG_KVM_BOOK3S_64=m, or a vmlinux link error
with CONFIG_KVM_BOOK3S_64=y):

ERROR: "smp_send_reschedule" [arch/powerpc/kvm/kvm.ko] undefined!
make[2]: *** [__modpost] Error 1

The fix for the link error is suboptimal; ideally we want a self_ipi()
function from irq.c, connected at least to the MPIC code, to initiate
an IPI to this cpu.  The fix here at least lets the code build, and it
will work, just with interrupts being delayed sometimes.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

remove cast for kmalloc/kzalloc return value.
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Signed-off-by: Alex Grad <alex.grad@gmail.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

When I submitted commit 6805ab6d
("powerpc: drop unused Kconfig symbols") I apparently failed to notice
that my patch also made PREP_RESIDUAL and PPC_A2_DD2 unused. Drop these
now.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

The last users of Kconfig symbol MPC10X_OPENPIC were removed in v2.6.27.
Its Kconfig entry can be removed now.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

All users of Kconfig symbol 405EP were removed in release v2.6.27.
Remove this symbol (and a useless select of it) too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Untested. As this typo was introduced in v3.3, with commit
9d670280 ("powerpc: Split ICSWX ACOP and
PID processing"), which actually added PPC_ICSWX_PID, this surely needs
testing.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

The Kconfig symbol MAX_ACTIVE_REGIONS is unused. Commit
0ee332c1 ("memblock: Kill
early_node_map[]") removed the only place were it was actually used. But
it did not remove its Kconfig entries (for powerpc and sh).

Remove those two entries (and the entry for metag, that popped up in
v3.9-rc1).
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

PPC_PREP is marked as BROKEN since v2.6.15. Remove all PReP specific
code now.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Commit c1fb6816 ("powerpc: Add
relocation on exception vector handlers") added two lines of code that
depend on the macro CONFIG_HVC_SCOM. That macro doesn't exist. Perhaps
it was intended to use CONFIG_PPC_SCOM here. But since
"maintence_interrupt" is a typo and there's nothing in arch/powerpc that
looks like maintenance_interrupt it seems best to just delete these
lines.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

The last user of Kconfig symbol 405GPR got removed in release v3.2.
Remove this symbol too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

The Kconfig symbol PCI_PERMEDIA got removed in v2.6.24, through commit
e6b6e3ff ("[POWERPC] Remove APUS support
from arch/ppc"). Remove its last occurrence.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

There is no Kconfig symbol PPC_WSP_COPRO. The select statement for it is
a nop. Drop it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Refresh and set CONFIG_RD_LZMA=y.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Use for_each_compatible_node() macro instead of open coding it.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

This fixes the following checkpatch.pl warnings:

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
+EXPORT_SYMBOL(kmap_prot);

WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
+EXPORT_SYMBOL(kmap_pte);
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Signed-off-by: Adrian-Leonard Radu <ady8radu@gmail.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

It's minor cleanup so that the function names comply with the
coding style.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

None of the users of DEFINE_BITOP pass a postfix, and as far as I can
tell none ever did, so drop it.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Memory allocated to rtas_firmware_flash_list in rtas_flash_write
is not freed during module exit. We hit below call trace if we
unload rtas_flash module after loading new firmware image and
before rebooting the system.

Call trace:
----------
Feb  6 08:42:10 eagle3 kernel: kmem_cache_destroy rtas_flash_cache: Slab cache still has objects
Feb  6 08:42:10 eagle3 kernel: Call Trace:
Feb  6 08:42:10 eagle3 kernel: [c00000001c303b40] [c000000000014940] .show_stack+0x70/0x1c0 (unreliable)
Feb  6 08:42:10 eagle3 kernel: [c00000001c303bf0] [c000000000199bec] .kmem_cache_destroy+0x15c/0x170
Feb  6 08:42:10 eagle3 kernel: [c00000001c303c90] [d000000006fa1208] .rtas_flash_cleanup+0x3c/0x80 [rtas_flash]
Feb  6 08:42:10 eagle3 kernel: [c00000001c303d20] [c0000000000f8970] .SyS_delete_module+0x1d0/0x2e0
Feb  6 08:42:10 eagle3 kernel: [c00000001c303e30] [c000000000009954] syscall_exit+0x0/0x94

This patch frees rtas_firmware_flash_list during module exit.
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Use macros in vpa calls.
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Flush lazy MMU when DEBUG_PAGEALLOC is set
  x86/mm/cpa/selftest: Fix false positive in CPA self test
  x86/mm/cpa: Convert noop to functional fix
  x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metal
  x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates

Pull scheduler fixes from Ingo Molnar:
 "Misc fixlets"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cputime: Fix accounting on multi-threaded processes
  sched/debug: Fix sd->*_idx limit range avoiding overflow
  sched_clock: Prevent 64bit inatomicity on 32bit systems
  sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s

Pull perf fixes from Ingo Molnar:
 "Misc fixlets"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix error return code
  ftrace: Fix strncpy() use, use strlcpy() instead of strncpy()
  perf: Fix strncpy() use, use strlcpy() instead of strncpy()
  perf: Fix strncpy() use, always make sure it's NUL terminated
  perf: Fix ring_buffer perf_output_space() boundary calculation
  perf/x86: Fix uninitialized pt_regs in intel_pmu_drain_bts_buffer()

Pull drm fixes from Dave Airlie:
 "One fix for a hotplug locking regressions, and one fix for an oops if
  you unplug the monitor at an inopportune moment on the udl device."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/fb-helper: Fix locking in drm_fb_helper_hotplug_event
  udl: handle EDID failure properly.

Pull m68knommu fix from Greg Ungerer:
 "This contains only a single compilation fix for ColdFire m68k targets
  that use local non-GPIOLIB support."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: define a local gpio_request_one() function

Pull watchdog fix from Wim Van Sebroeck:
 "It will fix compile errors for the at91rm9200_wdt driver"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: Revert the AT91RM9200_WATCHDOG dependency

Pull one more btrfs fix from Chris Mason:
 "This has a recent fix from Josef for our tree log replay code.  It
  fixes problems where the inode counter for the number of bytes in the
  file wasn't getting updated properly during fsync replay.

  The commit did get rebased this morning, but it was only to clean up
  the subject line.  The code hasn't changed."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: make sure nbytes are right after log replay

Merge tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace fixes from Steven Rostedt:
 "Namhyung Kim found and fixed a bug that can crash the kernel by simply
  doing: echo 1234 | tee -a /sys/kernel/debug/tracing/set_ftrace_pid

  Luckily, this can only be done by root, but still is a nasty bug."

* tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section
  tracing: Fix possible NULL pointer dereferences

Nothing is using it yet, but this will allow us to delay the open-time
checks to use time, without breaking the normal UNIX permission
semantics where permissions are determined by the opener (and the file
descriptor can then be passed to a different process, or the process can
drop capabilities).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>