Extract msdc timeout api common part to have
better code architecture and avoid redundant code.
Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/1595205759-5825-3-git-send-email-chun-hung.wu@mediatek.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add new code to support MT6779 mmc driver.
Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com>
Link: https://lore.kernel.org/r/1595205759-5825-2-git-send-email-chun-hung.wu@mediatek.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add HW tuning support for SD host controller in SDR104 mode
Signed-off-by: Shirley Her <shirley.her@bayhubtech.com>
Link: https://lore.kernel.org/r/20200721012700.8564-1-shirley.her@bayhubtech.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

To fix support for the O2 host controller Seabird1, set the quirk
SDHCI_QUIRK2_PRESET_VALUE_BROKEN and the capability bit MMC_CAP2_NO_SDIO.
Moreover, assign the ->get_cd() callback.
Signed-off-by: Shirley Her <shirley.her@bayhubtech.com>
Link: https://lore.kernel.org/r/20200721011733.8416-1-shirley.her@bayhubtech.com
[Ulf: Updated the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Drivers using legacy PM have to manage PCI states and device's PM states
themselves. They also need to take care of configuration registers.

With improved and powerful support of generic PM, PCI Core takes care of
above mentioned, device-independent, jobs.

This driver makes use of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(),
pci_enable_wake() and pci_set_power_state() and to do required operations.
In generic mode, they are no longer needed.

Change function parameter in both .suspend() and .resume() to
"struct device*" type. Use dev_get_drvdata() to get drv data.

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200720142603.577323-1-vaibhavgupta40@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Drivers using legacy PM have to manage PCI states and device's PM states
themselves. They also need to take care of configuration registers.

With improved and powerful support of generic PM, PCI Core takes care of
above mentioned, device-independent, jobs.

This driver makes use of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(),
pci_set_power_state() and pci_set_master() to do required operations. In
generic mode, they are no longer needed.

Change function parameter in both .suspend() and .resume() to
"struct device*" type. Use to_pci_dev() and dev_get_drvdata() to get
"struct pci_dev*" variable and drv data.

Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200720111625.306681-1-vaibhavgupta40@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

As commit ef6b7567 ("mmc: sdhci-cadence: send tune request twice to
work around errata") stated, this IP has an errata. This commit applies
the second workaround for the SD mode.

Due to the errata, it is not possible to use the hardware tuning provided
by SDHCI_HOST_CONTROL2.

Use the software-controlled tuning like the eMMC mode.

Set sdhci_host_ops::platform_execute_tuning instead of overriding
mmc_host_ops::execute_tuning.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20200720061141.172944-1-yamada.masahiro@socionext.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Set SDR104's clock to 205MHz and enable SSC for GL9750 and GL9755
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20200717033350.13006-1-benchuanggli@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The format string of the task descriptor should be "%016llx".
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Link: https://lore.kernel.org/r/20200715073344.8965-1-benchuanggli@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The initial code that was adding delays was doing a cast over undefined
memory. This meant that the delays would be all gibberish.

This change, allocates all delays on the stack, and assigns them from the
ZynqMP & Versal macros/phase-list. And then finally copies them over the
common iclk_phase & oclk_phase variables.
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Link: https://lore.kernel.org/r/1594753953-62980-1-git-send-email-manish.narani@xilinx.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Smatch complains that "ret" can be used without being initialized.

drivers/mmc/host/sdhci.c
  4383          if (!IS_ERR(mmc->supply.vqmmc)) {
  4384                  if (enable_vqmmc) {
                            ^^^^^^^^^^^^
  4385                          ret = regulator_enable(mmc->supply.vqmmc);
                                ^^^^^
  4386                          host->sdhci_core_to_disable_vqmmc = !ret;
  4387                  }

"ret" is only initialized when "enable_vqmmc" is true.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200714141410.GB314989@mwandaSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Convert Renesas SDHI SD/MMC controller document to YAML.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1594363883-22154-1-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Convert arasan,sdhci.txt file to yaml. The new file arasan,sdhci.yaml
will inherit properties from mmc-controller.yaml. 'sdhci' is no longer
a valid name for node and should be changed to 'mmc'.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200701023346.3873-1-wan.ahmad.zainie.wan.mohamad@intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Don't access vqmmc regulator handler, if it's already invalidated.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/1594300408-17658-1-git-send-email-vbadigan@codeaurora.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The commit 5a36d6bc ("mmc: core: Add DT-bindings for
MMC_CAP2_FULL_PWR_CYCLE") added the "full-pwr-cycle" property which
is possible to perform a full power cycle of the card at any time.

However, some environment (like r8a77951-salvator-xs) is possible
to perform a full power cycle of the card in suspend via firmware
(PSCI on arm-trusted-firmware). So, in worst case, since we are
not doing a graceful shutdown of the eMMC device (just cut VCCQ
while the eMMC is "sleeping") in suspend, it could lead to internal
data corruptions. So, add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND
to do a graceful shutdown which issues Power Off notification
before entering system suspend.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1594123122-13156-3-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The commit 5a36d6bc ("mmc: core: Add DT-bindings for
MMC_CAP2_FULL_PWR_CYCLE") added the "full-pwr-cycle" property which
is possible to perform a full power cycle of the card at any time.

However, some environment (like r8a77951-salvator-xs) is possible
to perform a full power cycle of the card in suspend via firmware
(PSCI on arm-trusted-firmware). So, add a new property for such
environment.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1594123122-13156-2-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Configure SDHC IO pins with low power configuration when the driver
is in suspend state.
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/1594213888-2780-2-git-send-email-vbadigan@codeaurora.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
'struct sdhci_iproc_acpi_ids' becomes defined but unused.

Fixes the following W=1 kernel build warning:

 mmc/host/sdhci-iproc.c:297:36: warning: ‘sdhci_iproc_acpi_ids’ defined but not used [-Wunused-const-variable=]

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20200707064701.GC3500@dellSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The variable 'found' is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200706163031.503431-1-colin.king@canonical.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

When building the kernel with W=1 the build system complains of:

 drivers/mmc/host/omap.c:854:6: warning: no previous prototype for ‘omap_mmc_notify_cover_event’ [-Wmissing-prototypes]
 854 | void omap_mmc_notify_cover_event(struct device *dev, int num, int is_closed)
 | ^~~~~~~~~~~~~~~~~~~~~~~~~~~

If we move the prototype into a shared headerfile the build system
will be satisfied.  Rather than create a whole new headerfile just
for this purpose, it makes sense to use the already existing
mmc-omap.h.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-mmc@vger.kernel.org
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20200701102317.235032-1-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

cqhci_host_alloc_tdl()'s function header is the only one in
kerneldoc format.  Which seems odd as it's not part of an
external API and isn't referenced anywhere else.  Seeing as
there has also been no attempt to describe the expected
function arguments either, we're going to assume that this is
not actually a bona fide kerneldoc use-case.

Fixes the following W=1 kernel build warning:

 drivers/mmc/host/cqhci.c:163: warning: Function parameter or member 'cq_host' not described in 'cqhci_host_alloc_tdl'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ritesh Harjani <riteshh@codeaurora.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200701124702.908713-15-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

__sdhci_msm_set_clock()'s function header is the only one in
kerneldoc format.  Which seems odd as it's not part of an
external API and isn't referenced anywhere else.  Seeing as
there has also been no attempt to describe the expected
function arguments either, we're going to assume that this is
not actually a bona fide kerneldoc use-case.

Fixes the following W=1 kernel build warnings:

 drivers/mmc/host/sdhci-msm.c:1595: warning: Function parameter or member 'host' not described in '__sdhci_msm_set_clock'
 drivers/mmc/host/sdhci-msm.c:1595: warning: Function parameter or member 'clock' not described in '__sdhci_msm_set_clock'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701124702.908713-14-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Kerneldoc expects arg descriptions to be in the format '@.*: '.  If either
the '@' or the ':' is omitted then kerneldoc complains that the description
is missing.  Add the missing ':' here and provide a new description for
'value'.

Fixes the following kernel build W=1 warnings:

 drivers/mmc/host/sdhci-of-arasan.c:1394: warning: Function parameter or member 'host' not described in 'sdhci_arasan_update_support64b'
 drivers/mmc/host/sdhci-of-arasan.c:1394: warning: Function parameter or member 'value' not described in 'sdhci_arasan_update_support64b'
 drivers/mmc/host/sdhci-msm.c:1887:6: warning: no previous prototype for ‘sdhci_msm_dump_vendor_regs’ [-Wmissing-prototypes]

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Xiaobo Xie <X.Xie@freescale.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Soeren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701124702.908713-12-lee.jones@linaro.orgAcked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Seeing as sd_wait_data_idle() returns void and only a very specific
read value is checked, there doesn't seem to be a good reason to
check the return value of rtsx_pci_read_register().  So remove
the assignment and definition of 'err'.

Squashes the following W=1 kernel build warning:

 drivers/mmc/host/rtsx_usb_sdmmc.c: In function ‘sd_wait_data_idle’:
 drivers/mmc/host/rtsx_usb_sdmmc.c:657:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]
 657 | int err, i;
 | ^~~

Cc: Roger Tseng <rogerable@realtek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701124702.908713-11-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Seeing as sd_wait_data_idle() returns void and only a very specific
read value is checked, there doesn't seem to be a good reason to
check the return value of rtsx_pci_read_register().  So remove
the assignment and definition of 'err'.

Squashes the following W=1 kernel build warning:

 drivers/mmc/host/rtsx_pci_sdmmc.c: In function ‘sd_wait_data_idle’:
 drivers/mmc/host/rtsx_pci_sdmmc.c:678:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]
 678 | int err, i;
 | ^~~

Cc: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701124702.908713-10-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Provide missing documentation for dw_mci_exynos_suspend_noirq() and
dw_mci_exynos_resume_noirq() function headers.

Fixes the following W=1 kernel build warnings:

 drivers/mmc/host/dw_mmc-exynos.c:184: warning: Function parameter or member 'dev' not described in 'dw_mci_exynos_suspend_noirq'
 drivers/mmc/host/dw_mmc-exynos.c:200: warning: Function parameter or member 'dev' not described in 'dw_mci_exynos_resume_noirq'

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/20200701124702.908713-9-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Correcting this misspelling squashes the following W=1 build warning(s):

 mmc/core/queue.c:212: warning: Function parameter or member 'mq' not described in '__mmc_init_request'
 mmc/core/queue.c:212: warning: Excess function parameter 'q' description in '__mmc_init_request'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701124702.908713-8-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

'sg_len' and 'dma_conf' are missing correct kerneldoc documentation and
'buf_phys_addr' was misspelled.  Correcting these issues fixes the
following W=1 kernel build issues:

 mmc/host/atmel-mci.c:352: warning: Function parameter or member 'sg_len' not described in 'atmel_mci'
 mmc/host/atmel-mci.c:352: warning: Function parameter or member 'buf_phys_addr' not described in 'atmel_mci'
 mmc/host/atmel-mci.c:352: warning: Function parameter or member 'dma_conf' not described in 'atmel_mci'

Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701124702.908713-7-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

No other function in the file is documented using kerneldoc and no
effort to document the function arguments have been made.  It's a
bit of an oddity to say the least.  Let's downgrade it from
kerneldoc to a standard comment block instead.

Fixes the following W=1 kernel build warning:

 drivers/mmc/host/mtk-sd.c:1030: warning: Function parameter or member 'host' not described in 'msdc_recheck_sdio_irq'

Cc: Chaotian Jing <chaotian.jing@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20200701124702.908713-6-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Describe properties; ext_cd_irq, clk_rates and no_divider (x2).

Squashes the following W=1 kernel build warnings:

 drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'ext_cd_irq' not described in 'sdhci_s3c'
 drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'clk_rates' not described in 'sdhci_s3c'
 drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'no_divider' not described in 'sdhci_s3c'
 drivers/mmc/host/sdhci-s3c.c:139: warning: Function parameter or member 'no_divider' not described in 'sdhci_s3c_drv_data'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Link: https://lore.kernel.org/r/20200701124702.908713-5-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Remainder of the kerneldoc descriptions look present and correct.

Fixes the following W=1 kernel build warnings:

 drivers/mmc/core/regulator.c:178: warning: Function parameter or member 'mmc' not described in 'mmc_regulator_set_vqmmc'
 drivers/mmc/core/regulator.c:178: warning: Function parameter or member 'ios' not described in 'mmc_regulator_set_vqmmc'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701124702.908713-4-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add missing kerneldoc entry for sdio_set_host_pm_flags()'s 'flag'
function argument.

Fixes the following W=1 kernel build warning:

 kernel/drivers/mmc/core/sdio_io.c:722: warning: Function parameter or member 'flags' not described in 'sdio_set_host_pm_flags'

Cc: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701124702.908713-3-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Not all source files which include quirks.h make use of the all of
the available fixup information.  When this happens the compiler
complains that some constant variables are defined by never used.
We can fix this by telling the compiler that this intentional by
simply marking them as __maybe_unused.

Fixes the following W=1 kernel build warnings:

 In file included from drivers/mmc/core/sdio.c:22:
 drivers/mmc/core/quirks.h:105:31: warning: ‘mmc_ext_csd_fixups’ defined but not used [-Wunused-const-variable=]
 105 | static const struct mmc_fixup mmc_ext_csd_fixups[] = {
 | ^~~~~~~~~~~~~~~~~~
 drivers/mmc/core/quirks.h:17:31: warning: ‘mmc_blk_fixups’ defined but not used [-Wunused-const-variable=]
 17 | static const struct mmc_fixup mmc_blk_fixups[] = {
 | ^~~~~~~~~~~~~~
 In file included from drivers/mmc/core/mmc.c:25:
 drivers/mmc/core/quirks.h:123:31: warning: ‘sdio_fixup_methods’ defined but not used [-Wunused-const-variable=]
 123 | static const struct mmc_fixup sdio_fixup_methods[] = {
 | ^~~~~~~~~~~~~~~~~~
 drivers/mmc/core/quirks.h:17:31: warning: ‘mmc_blk_fixups’ defined but not used [-Wunused-const-variable=]
 17 | static const struct mmc_fixup mmc_blk_fixups[] = {
 | ^~~~~~~~~~~~~~

Cc: Andrei Warkentin <andreiw@motorola.com>
Cc: Martin Mares <mj@ucw.cz>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701124702.908713-2-lee.jones@linaro.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Fix sparse build warning:

drivers/mmc/host/sdhci-msm.c:1888:6: warning:
 symbol 'sdhci_msm_dump_vendor_regs' was not declared. Should it be static?
Signed-off-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200702020347.77214-1-weiyongjun1@huawei.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

If this controller doesn't issue interrupt for response of command,
this driver lacks to call dma_unmap_sg(). So, fix the issue by
using end() of struct tmio_mmc_dma_ops.
Reported-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
Fixes: 2a68ea78 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1590044466-28372-4-git-send-email-yoshihiro.shimoda.uh@renesas.comTested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

To add end() operation in the future, clean the code of
renesas_sdhi_internal_dmac_complete_tasklet_fn(). No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1590044466-28372-3-git-send-email-yoshihiro.shimoda.uh@renesas.comTested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Related drivers like renesas_sdhi_internal_dmac are possible
to lack dma unmaping in error cases (for example response timeout).

Since tmio_mmc_finish_request() will be always called in any case,
to fix the issue, add end operation into struct tmio_mmc_dma_ops and
call the operation in tmio_mmc_finish_request() to call dma_ummap API
by the related drivers correctly.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1590044466-28372-2-git-send-email-yoshihiro.shimoda.uh@renesas.comTested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Define appropriate macro names for consistency with other macros.
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20200629072144.24351-1-pali@kernel.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

On qcom SD host controllers voltage switching be done after the HW
is ready for it. The HW informs its readiness through power irq.
The voltage switching should happen only then.

Use the internal voltage switching and then control the voltage
switching using power irq.

IO-bus supply of eMMC would be kept always-on. So set the load
for this supply to configure it in LPM when eMMC is suspend state
and in HPM when eMMC is active.
Co-developed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Co-developed-by: Vijay Viswanath <vviswana@codeaurora.org>
Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org>
Co-developed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/1592919288-1020-4-git-send-email-vbadigan@codeaurora.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>