- 29 Jul, 2021 2 commits
-
-
Christoph Hellwig authored
Merge the native and compat ioctl handlers into a single one using in_compat_syscall(). Link: https://lore.kernel.org/r/20210724072033.1284840-3-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Christoph Hellwig authored
SCSI_IOCTL_SEND_COMMAND has been deprecated longer than bsg exists and has been warning for just as long. More importantly it harcodes SCSI CDBs and thus will do the wrong thing on non-SCSI bsg nodes. Link: https://lore.kernel.org/r/20210724072033.1284840-2-hch@lst.de Fixes: aa387cc8 ("block: add bsg helper library") Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Acked-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
- 27 Jul, 2021 21 commits
-
-
Nilesh Javali authored
Link: https://lore.kernel.org/r/20210624052606.21613-12-njavali@marvell.comSigned-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
-
Quinn Tran authored
Increment the command and the completion counts. Link: https://lore.kernel.org/r/20210624052606.21613-11-njavali@marvell.comSigned-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Quinn Tran authored
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. After the completion of PLOGI, both sides have authenticated and PRLI completed, encrypted I/Os are allowed to proceed. - Use new firmware API to encrypt traffic on the wire - Add driver parameter to enable|disable EDIF feature # modprobe qla2xxx ql2xsecenable=1 Link: https://lore.kernel.org/r/20210624052606.21613-10-njavali@marvell.comReviewed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by:
Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by:
Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by:
Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by:
-
Quinn Tran authored
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. During runtime, driver and authentication application need to stay in sync in terms of: Session being down|up, arrival of new authentication message (AUTH ELS) and SADB update completion. These events are queued up as doorbell to the authentication application. Application would read this doorbell on regular basis to stay up to date. Each SCSI host would have a separate doorbell queue. The doorbell interface can daisy chain a list of events for each read. Each event contains an event code + hint to help application steer the next course of action. Link: https://lore.kernel.org/r/20210624052606.21613-9-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. There is no FC switch scan service that can indicate whether a device is secure or non-secure. In order to detect whether the remote port supports encrypted operation, driver must first do a PLOGI with the remote device. On completion of the PLOGI, driver will query firmware to see if the device supports secure login. To do that, driver + firmware must advertise the security bit via PLOGI's service parameter. The remote device shall respond using the same service parameter whether it supports it or not. Link: https://lore.kernel.org/r/20210624052606.21613-8-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. On completion of the authentication process, the authentication application will notify driver on whether it is successful or not. In case of success, application will use the QL_VND_SC_AUTH_OK BSG call to tell driver to proceed to the PRLI phase. In case of failure, application will use the QL_VND_SC_AUTH_FAIL bsg call to tell driver to tear down the connection and retry. In the case where an existing session is active, the re-key process can fail. The session tear down ensures data is not further compromised. Link: https://lore.kernel.org/r/20210624052606.21613-7-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. As part of the authentication process, the authentication application will generate a SADB entry (Security Association/SA, key, SPI value, etc). This SADB is then passed to driver to be programmed into hardware. There will be a pair of SADB's (Tx and Rx) for each connection. After some period, the application can choose to change the key. At that time, a new set of SADB pair is given to driver. The old set of SADB will be deleted. Add a new bsg call (QL_VND_SC_SA_UPDATE) to allow application to allow adding or deleting SADB entries. Driver will not keep the key in memory. It will pass it to HW. It is assumed that application will assign a unique SPI value to this SADB (SA + key). Driver + hardware will assign a handle to track this unique SPI/SADB. Link: https://lore.kernel.org/r/20210624052606.21613-6-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. Once authentication messages sent from a remote device have arrived, each message is extracted and placed in a buffer for application to retrieve. The FC frame header will be stripped, leaving behind the AUTH ELS payload. It is up to the application to strip the AUTH ELS header to get to the actual authentication message. Link: https://lore.kernel.org/r/20210624052606.21613-5-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. Add the ability for authentication application to send and retrieve messages as part of the authentication process via existing FC_BSG_HST_ELS_NOLOGIN BSG interface. To send a message, application is expected to format the data in the AUTH ELS format. Refer to FC-SP2 for details. If a message was received, application is required to reply with either a LS_ACC or LS_RJT complete the exchange using the same interface. Otherwise, remote device will treat it as a timeout. Link: https://lore.kernel.org/r/20210624052606.21613-4-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. Add two new BSG calls: - QL_VND_SC_GET_FCINFO: Application can from time to time request a list of all FC ports or a single device that supports secure connection. If driver sees a new or old device has logged into the switch, this call is used to check for the WWPN. - QL_VND_SC_GET_STATS: Application request for various statistics for each FC port. Link: https://lore.kernel.org/r/20210624052606.21613-3-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. Add two new BSG calls: - QL_VND_SC_APP_START: Application will announce its presence to driver with this call. Driver will restart all connections to see if remote device supports security or not. - QL_VND_SC_APP_STOP: Application announces it is in the process of exiting. Driver will restart all connections to revert back to non-secure. Provided the remote device is willing to allow a non-secure connection. Link: https://lore.kernel.org/r/20210624052606.21613-2-njavali@marvell.comReviewed-by:
-
Bill Wendling authored
Fix the clang build warning: drivers/scsi/qla2xxx/qla_nx.c:2209:6: error: variable 'status' set but not used [-Werror,-Wunused-but-set-variable] int status = 0; Link: https://lore.kernel.org/r/20210726201924.3202278-4-morbo@google.comReviewed-by:Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Bill Wendling <morbo@google.com> Signed-off-by:
-
Guoqing Jiang authored
SCSI_SAS_ATTRS already selects BLK_DEV_BSGLIB in drivers/scsi/Kconfig. Remove selection in libsas/Kconfig. Link: https://lore.kernel.org/r/20210723084624.2596297-1-guoqing.jiang@linux.devSigned-off-by:
Guoqing Jiang <jiangguoqing@kylinos.cn> Signed-off-by:
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read, the assignment is redundant and can be removed. Link: https://lore.kernel.org/r/20210721101519.42299-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The pointer pcmd is being initialized with a value that is never read, the assignment is redundant and can be removed. Link: https://lore.kernel.org/r/20210721095350.41564-1-colin.king@canonical.comSigned-off-by:
-
James Smart authored
Update copyrights to 2021 for files modified in the 14.0.0.0 patch set. Link: https://lore.kernel.org/r/20210722221721.74388-7-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Update lpfc version to 14.0.0.0. Link: https://lore.kernel.org/r/20210722221721.74388-6-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Update routines to support 256 Gb link speed for LPe37000/LPe38000 adapters. 256 Gb speeds can be seen on trunk links. Link: https://lore.kernel.org/r/20210722221721.74388-5-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Support for Topology and RAS logging capabilities were qualified by PCIe device ID checks necessitating additional driver changes for new device IDs. Reduce reliance on specific PCIe device IDs by substituting checks for SLI family information. This automatically picks up support on the newest hardware. Link: https://lore.kernel.org/r/20210722221721.74388-4-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
On the newer hardware, CQ_ID values can be larger than seen on previous generations. This exposed an issue in the driver where its definition of cq_id in the RQ Create mailbox cmd was too small, thus the cq_id was truncated, causing the command to fail. Revise the RQ_CREATE CQ_ID field to its proper size (16 bits). Link: https://lore.kernel.org/r/20210722221721.74388-3-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Update supported pci_device_id table to include the values for the G7+ ASIC Device ID utilized by LPe37xxx and LPe38xxx series of adapters. The default reporting string will be "LPe38000". Link: https://lore.kernel.org/r/20210722221721.74388-2-jsmart2021@gmail.comCo-developed-by:
-
- 22 Jul, 2021 3 commits
-
-
Martin Kepplinger authored
Ultra HS-SD/MMC card reader devices establish a MEDIUM MAY HAVE CHANGED unit attention not only when the medium changes but also when resuming from suspend. Setting the BLIST_IGN_MEDIA_CHANGE flag permits using runtime PM for these readers. [mkp: renamed flag] Link: https://lore.kernel.org/r/20210704075403.147114-4-martin.kepplinger@puri.smReviewed-by:
Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by:
-
Martin Kepplinger authored
For SD card reader devices that have the BLIST_IGN_MEDIA_CHANGE flag set, a MEDIUM MAY HAVE CHANGED unit attention is established after resuming from runtime suspend. Send a REQUEST SENSE to consume the UA. The "downside" is that for these devices we now rely on users to not change the medium (SD card) *during* a runtime suspend/resume cycle, i.e. when not unmounting. To enable runtime PM for an SD cardreader (device number 0:0:0:0), do: echo 0 > /sys/module/block/parameters/events_dfl_poll_msecs echo 1000 > /sys/bus/scsi/devices/0:0:0:0/power/autosuspend_delay_ms echo auto > /sys/bus/scsi/devices/0:0:0:0/power/control [mkp: use scsi_device flag instead of poking at BLIST] Link: https://lore.kernel.org/r/20210704075403.147114-3-martin.kepplinger@puri.smReviewed-by:
-
Martin Kepplinger authored
Add a new flag for devices that erroneously establish MEDIUM MAY HAVE CHANGED unit attentions. Drivers can set this flag to make the SCSI layer ignore media change events during resume. [mkp: add "ignore" and add corresponding flag to struct scsi_device] Link: https://lore.kernel.org/r/20210704075403.147114-2-martin.kepplinger@puri.smReviewed-by:
-
- 21 Jul, 2021 10 commits
-
-
Jason Yan authored
libsas needs to include some header files in the scsi directory. However these are currently hardcoded with the path "../" in the C files. Do this in the Makefile to avoid hardcoding the path. Link: https://lore.kernel.org/r/20210716074551.771312-1-yanaijie@huawei.com Cc: John Garry <john.garry@huawei.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Martin K. Petersen authored
Use the scsi_get_lba() helper instead of a function internal to the SCSI disk driver. Remove #include "sd.h". Link: https://lore.kernel.org/r/20210609033929.3815-16-martin.petersen@oracle.comReviewed-by:
-
Martin K. Petersen authored
scsi_get_lba() confusingly returned the block layer sector number expressed in units of 512 bytes. Now that we have a more aptly named scsi_get_sector() function, make scsi_get_lba() return the actual LBA. Link: https://lore.kernel.org/r/20210609033929.3815-13-martin.petersen@oracle.comReviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
-
Bart Van Assche authored
Use scsi_get_sector() instead of scsi_get_lba() since the name of the latter is confusing. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210513223757.3938-3-bvanassche@acm.org Link: https://lore.kernel.org/r/20210609033929.3815-12-martin.petersen@oracle.comReviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Bart Van Assche authored
Since scsi_get_lba() returns a sector_t value instead of the LBA, the name of that function is confusing. Introduce an identical function scsi_get_sector(). Link: https://lore.kernel.org/r/20210513223757.3938-2-bvanassche@acm.org Link: https://lore.kernel.org/r/20210609033929.3815-11-martin.petersen@oracle.com Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Reviewed-by:
-
Martin K. Petersen authored
It is useful for testing purposes to be able to inject errors by writing bad protection information to media with checking disabled and then attempting to read it back. Extend scsi_debug's PI verification logic to give the driver feature parity with commercially available drives. Almost all devices with PI capability support RDPROTECT and WRPROTECT values of 0, 1, and 3. Link: https://lore.kernel.org/r/20210609033929.3815-10-martin.petersen@oracle.comReviewed-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Martin K. Petersen authored
The function used to dump sectors containing protection information errors was useful during initial development over a decade ago. However, dump_sector() substantially slows down the system during testing due to writing an entire sector's worth of data to syslog on every error. We now log plenty of information about the nature of detected protection information errors throughout the stack. Dumping the entire contents of an offending sector is no longer needed. Link: https://lore.kernel.org/r/20210609033929.3815-9-martin.petersen@oracle.comReviewed-by:
-
Martin K. Petersen authored
Use scsi_prot_ref_tag() and scsi_prot_interval() instead scsi_get_lba() and sector_size. Link: https://lore.kernel.org/r/20210609033929.3815-7-martin.petersen@oracle.comReviewed-by:
-
Martin K. Petersen authored
Use the SCSI midlayer interfaces to query protection interval, reference tag, and per-command DIX flags. Link: https://lore.kernel.org/r/20210609033929.3815-4-martin.petersen@oracle.comReviewed-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Martin K. Petersen authored
We are about to remove the request pointer from struct scsi_cmnd and that will complicate getting to the ref_tag via t10_pi_ref_tag() in the various drivers. Introduce a helper function to retrieve the reference tag so drivers will not have to worry about the details. Link: https://lore.kernel.org/r/20210609033929.3815-2-martin.petersen@oracle.comReviewed-by:
-
- 20 Jul, 2021 4 commits
-
-
Don Brace authored
Link: https://lore.kernel.org/r/20210714182847.50360-10-don.brace@microchip.comReviewed-by:
Kevin Barnett <kevin.barnett@microchip.com> Reviewed-by:
Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by:
Scott Benesh <scott.benesh@microchip.com> Reviewed-by:
Scott Teel <scott.teel@microchip.com> Reviewed-by:
Gerry Morong <gerry.morong@microchip.com> Signed-off-by:
Don Brace <don.brace@microchip.com> Signed-off-by:
-
Mike McGowen authored
Correct driver's ISR accessing a data structure member that has not been fully initialized during driver initialization. The pqi queue groups can have uninitialized members when an interrupt fires. This has not resulted in any driver crashes. This was found during our own internal testing. No bugs were ever filed. Link: https://lore.kernel.org/r/20210714182847.50360-9-don.brace@microchip.comReviewed-by:
-
Balsundar P authored
Add support for ZTE RM241-18i 2G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_5445 Add support for ZTE RM242-18i 4G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_5446 Add support for ZTE RM243-18i device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_5447 Add support for ZTE SDPSA/B-18i 4G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_0B27 Add support for ZTE SDPSA/B_I-18i device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_0B29 Add support for ZTE SDPSA/B_L-18i 2G device ID: VID_9005, DID_028F, SVID_1CF2 and SDID_0B45 Link: https://lore.kernel.org/r/20210714182847.50360-8-don.brace@microchip.comReviewed-by:Balsundar P <balsundar.p@microchip.com> Signed-off-by:
-
Mike McGowen authored
Add support for Norsi ntcom Raid-24i controller: VID_0x9005, DID_0x028f, SVID_0x1dfc, SDID_0x3161 Link: https://lore.kernel.org/r/20210714182847.50360-7-don.brace@microchip.comReviewed-by:
-
