Michael Weiß says:

====================
net: openvswitch: metering and conntrack in userns

Currently using openvswitch in a non-initial user namespace, e.g., an
unprivileged container, is possible but without metering and conntrack
support. This is due to the restriction of the corresponding Netlink
interfaces to the global CAP_NET_ADMIN.

This simple patches switch from GENL_ADMIN_PERM to GENL_UNS_ADMIN_PERM
in several cases to allow this also for the unprivileged container
use case.

We tested this for unprivileged containers created by the container
manager of GyroidOS (gyroidos.github.io). However, for other container
managers such as LXC or systemd which provide unprivileged containers
this should be apply equally.
====================

Link: https://lore.kernel.org/r/20220923133820.993725-1-michael.weiss@aisec.fraunhofer.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Similar to the previous commit, the Netlink interface of the OVS
conntrack module was restricted to global CAP_NET_ADMIN by using
GENL_ADMIN_PERM. This is changed to GENL_UNS_ADMIN_PERM to support
unprivileged containers in non-initial user namespace.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The Netlink interface for metering was restricted to global CAP_NET_ADMIN
by using GENL_ADMIN_PERM. To allow metring in a non-inital user namespace,
e.g., a container, this is changed to GENL_UNS_ADMIN_PERM.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This enables SO_REUSEPORT [1] for clcsock when it is set on smc socket,
so that some applications which uses it can be transparently replaced
with SMC. Also, this helps improve load distribution.

Here is a simple test of NGINX + wrk with SMC. The CPU usage is collected
on NGINX (server) side as below.

Disable SO_REUSEPORT:

05:15:33 PM  CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle
05:15:34 PM  all    7.02    0.00   11.86    0.00    2.04    8.93    0.00    0.00    0.00   70.15
05:15:34 PM    0    0.00    0.00    0.00    0.00   16.00   70.00    0.00    0.00    0.00   14.00
05:15:34 PM    1   11.58    0.00   22.11    0.00    0.00    0.00    0.00    0.00    0.00   66.32
05:15:34 PM    2    1.00    0.00    1.00    0.00    0.00    0.00    0.00    0.00    0.00   98.00
05:15:34 PM    3   16.84    0.00   30.53    0.00    0.00    0.00    0.00    0.00    0.00   52.63
05:15:34 PM    4   28.72    0.00   44.68    0.00    0.00    0.00    0.00    0.00    0.00   26.60
05:15:34 PM    5    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00  100.00
05:15:34 PM    6    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00  100.00
05:15:34 PM    7    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00    0.00  100.00

Enable SO_REUSEPORT:

05:15:20 PM  CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle
05:15:21 PM  all    8.56    0.00   14.40    0.00    2.20    9.86    0.00    0.00    0.00   64.98
05:15:21 PM    0    0.00    0.00    4.08    0.00   14.29   76.53    0.00    0.00    0.00    5.10
05:15:21 PM    1    9.09    0.00   16.16    0.00    1.01    0.00    0.00    0.00    0.00   73.74
05:15:21 PM    2    9.38    0.00   16.67    0.00    1.04    0.00    0.00    0.00    0.00   72.92
05:15:21 PM    3   10.42    0.00   17.71    0.00    1.04    0.00    0.00    0.00    0.00   70.83
05:15:21 PM    4    9.57    0.00   15.96    0.00    0.00    0.00    0.00    0.00    0.00   74.47
05:15:21 PM    5    9.18    0.00   15.31    0.00    0.00    1.02    0.00    0.00    0.00   74.49
05:15:21 PM    6    8.60    0.00   15.05    0.00    0.00    0.00    0.00    0.00    0.00   76.34
05:15:21 PM    7   12.37    0.00   14.43    0.00    0.00    0.00    0.00    0.00    0.00   73.20

Using SO_REUSEPORT helps the load distribution of NGINX be more
balanced.

[1] https://man7.org/linux/man-pages/man7/socket.7.htmlSigned-off-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20220922121906.72406-1-tonylu@linux.alibaba.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Sean Anderson says:

====================
net: sunhme: Cleanups and logging improvements

This series is a continuation of [1] with a focus on logging improvements (in
the style of commit b11e5f6a ("net: sunhme: output link status with a single
print.")). I have included several of Rolf's patches in the series where
appropriate (with slight modifications). After this series is applied, many more
messages from this driver will come with driver/device information.
Additionally, most messages (especially debug messages) have been condensed onto
one line (as KERN_CONT messages get split).

[1] https://lore.kernel.org/netdev/4686583.GXAFRqVoOG@eto.sf-tec.de/
====================

Link: https://lore.kernel.org/r/20220924015339.1816744-1-seanga2@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I have the hardware so at the very least I can test things.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The SXD, TXD, and RXD macros are used only once (or twice). Just use the
vdbg print, which seems to have been devised for these sorts of very
verbose messages.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This driver seems to have been written under the assumption that messages
can be continued arbitrarily. I'm not when this changed (if ever), but such
ad-hoc continuations are liable to be rudely interrupted. Convert all such
instances to single prints. This loses a bit of timing information (such as
when a line was constructed piecemeal as the function executed), but it's
easy to add a few prints if necessary. This also adds newlines to the ends
of any prints without them.

Since (almost every) debug print included the name of the function, include
it automatically.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Wherever possible, use the associated netdev (or device) when printing
errors or other messages. This makes it immediately clear what device
caused the error, and provides more information than just the device name.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is a mostly-mechanical translation of the existing printks into
pr_foos. In several places, I have pasted messages which were broken over
several lines to allow for easier grepping.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove all the single-use debug conditionals, and just collect the debug
defines at the top of the file. HMD seems like it is used for general debug
info, so just redefine it as pr_debug. Additionally, instead of using the
default loglevel, use the debug loglevel for debugging.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With the power of variadic macros, double parentheses are unnecessary.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This not only removes a lot of code, it also fixes the memleak of the DMA
memory when register_netdev() fails.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
[ rebased onto net-next/master; fixed error reporting ]
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This fixes several error paths to ensure they return an appropriate error
(instead of ENODEV).
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In order to differentiate between a missing bridge and an OOM condition,
return ERR_PTRs from quattro_pci_find. This also does some general linting
in the area.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This already returns a proper error value, so pass it to the caller.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Module versions are not very useful:

> The basic problem is, the version string does not identify the sources
> with enough accuracy. It says nothing about back ported fixes in
> stable kernels. It tells you nothing about vendor patches to the
> network core, etc.

https://lore.kernel.org/all/Yf6mtvA1zO7cdzr7@lunn.ch/

While we're at it, inline the author and use the driver name a bit more.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

I can't find a reference to it in the entire git history.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Yang Yingliang says:

====================
net: dsa: remove unnecessary i2c_set_clientdata()

This patchset https://lore.kernel.org/all/20220921140524.3831101-8-yangyingliang@huawei.com/T/
removed all set_drvdata(NULL) in driver remove function.

i2c_set_clientdata() is another wrapper of set drvdata function, to follow
the same convention, remove i2c_set_clientdata() called in driver remove
function in drivers/net/dsa/.
====================

Link: https://lore.kernel.org/r/20220923143742.87093-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove unnecessary i2c_set_clientdata() in ->remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Practical experience (and advice from Alexei) tell us that bitfields in
structs lead to un-optimized assembly code. I've verified this change
does lead to better x86_64 assembly, both via objdump and playing with
code snippets in godbolt.org.

Using scripts/bloat-o-meter shows the code size is reduced with 24
bytes for xdp_convert_buff_to_frame() that gets inlined e.g. in
i40e_xmit_xdp_tx_ring() which were used for microbenchmarking.

Microbenchmarking results do show improvements, but very small and
varying between 0.5 to 2 nanosec improvement per packet.

The member @metasize is changed from u8 to u32. Future users of this
area could split this into two u16 fields. I've also benchmarked with
two u16 fields showing equal performance gains and code size reduction.

The moved member @frame_sz doesn't change sizeof struct due to existing
padding. Like xdp_buff member @frame_sz is placed next to @flags, which
allows compiler to optimize assignment of these.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/166393728005.2213882.4162674859542409548.stgit@firesoulSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
Improve tsn_lib selftests for future distributed tasks

Some of the boards I am working with are limited in the number of ports
that they offer, and as more TSN related selftests are added, it is
important to be able to distribute the work among multiple boards.
A large part of implementing that is ensuring network-wide
synchronization, but also permitting more streams of data to flow
through the network. There is the more important aspect of also
coordinating the timing characteristics of those streams, and that is
also something that is tackled, although not in this modest patch set.
The goal here is not to introduce new selftests yet, but just to lay a
better foundation for them. These patches are a part of the cleanup work
I've done while working on selftests for frame preemption. They are
regression-tested with psfp.sh.
====================

Link: https://lore.kernel.org/r/20220923210016.3406301-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We can make the phc2sys helper not only synchronize a PHC to
CLOCK_REALTIME, which is what it currently does, but also CLOCK_REALTIME
to a PHC, which is going to be needed in distributed TSN tests.

Instead of making the complexity of the arguments passed to
phc2sys_start() explode, we can let it figure out the sync direction
automatically, based on ptp4l's port states.

Towards that goal, pass just the path to the desired ptp4l instance's
UNIX domain socket, and remove the $if_name argument (from which it
derives the PHC). Also adapt the one caller from the ocelot psfp.sh
test. In the case of psfp.sh, phc2sys_start is able to properly figure
out that CLOCK_REALTIME is the source clock and swp1's PHC is the
destination, because of the way in which ptp4l_start for the
UDS_ADDRESS_SWP1 was called: with slave_only=false, so it will always
win the BMCA and always become the sync master between itself and $h1.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Move the PID variable for the isochron receiver into a separate
namespace per stats port, to allow multiple receivers (and/or
orchestration daemons) to be instantiated by the same script.

Preserve the existing behavior by making isochron_do() use the default
stats TCP port of 5000.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Switch ports will want to act as Boundary Clocks, which are configured
using ptp4l by specifying the "-i" argument multiple times.

Since we track a log file and a pid file for each ptp4l instance, and we
want to be compatible with the existing single-port callers of
ptp4l_start and ptp4l_stop, pass the interface list as a single string
of space-separated values. Based on this, we create a label for each
ptp4l instance, where the spaces are replaced with underscores
(ptp4l_start "eth0 eth1" generates "ptp4l_pid_eth0_eth1").
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The extra_args argument ($3) of isochron_recv_start is overwritten with
uds ($2), if that argument exists.

This is currently not a problem, because the only TSN selftest
(ocelot/psfp.sh) omits remote sync so it does not specify to the
receiver a UNIX domain socket for ptp4l. So $uds is currently an empty
string.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220922070438.586692-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863b ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:

SPI driver mse102x has no spi_device_id for vertexcom,mse1021
SPI driver mse102x has no spi_device_id for vertexcom,mse1022

Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>

Link: https://lore.kernel.org/r/20220922065717.1448498-1-weiyongjun@huaweicloud.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In case of error, the function get_phy_device() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220922021023.811581-1-weiyongjun@huaweicloud.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Arun Ramadoss says:

====================
net: dsa: microchip: ksz9477: enable interrupt for internal phy link detection

This patch series implements the common interrupt handling for ksz9477 based
switches and lan937x. The ksz9477 and lan937x has similar interrupt registers
except ksz9477 has 4 port based interrupts whereas lan937x has 6 interrupts.
The patch moves the phy interrupt hanler implemented in lan937x_main.c to
ksz_common.c, along with the mdio_register functionality.
====================

Link: https://lore.kernel.org/r/20220922071028.18012-1-arun.ramadoss@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Config_intr and handle_interrupt are enabled for ksz9477 phy. It is
similar to all other phys in the micrel phys.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The global port interrupt routines and individual ports interrupt
routines has similar implementation except the mask & status register
and number of nested irqs in them.  The mask & status register and
pointer to ksz_device is added to ksz_irq and uses the ksz_irq as
irq_chip_data.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To support the phy link detection through interrupt method for ksz9477
based switch, the interrupt handling routines are moved from
lan937x_main.c to ksz_common.c. The only changes made are functions
names are prefixed with ksz_ instead of lan937x_.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, if the mdio node is not present in the dts file then
lan937x_mdio_register return -ENODEV and entire probing process fails.
To make the mdio_register generic for all ksz series switches and to
maintain back-compatibility with existing dts file, return -ENODEV is
replaced with return 0.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In the lan937x_mdio_register function, phy interrupts are enabled
irrespective of irq is enabled in the switch. Now, the check is added to
enable the phy interrupt only if the irq is enabled in the switch.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the number of port irqs is hard coded for the lan937x switch
as 6. In order to make the generic interrupt handler for ksz switches,
number of port irq supported by the switch is added to the
ksz_chip_data. It is 4 for ksz9477, 2 for ksz9897 and 3 for ksz9567.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

taprio_dev_notifier() subscribes to netdev state changes in order to
determine whether interfaces which have a taprio root qdisc have changed
their link speed, so the internal calculations can be adapted properly.

The 'qdev' temporary variable serves no purpose, because we just use it
only once, and can just as well use qdisc_dev(q->root) directly (or the
"dev" that comes from the netdev notifier; this is because qdev is only
interesting if it was the subject of the state change, _and_ its root
qdisc belongs in the taprio list).

The 'found' variable also doesn't really serve too much of a purpose
either; we can just call taprio_set_picos_per_byte() within the loop,
and exit immediately afterwards.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20220923145921.3038904-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Gaosheng Cui says:

====================
Remove useless inline functions from net
====================

Link: https://lore.kernel.org/r/20220922083857.1430811-1-cuigaosheng1@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>