- 12 Jul, 2018 1 commit
-
-
Rodrigo Siqueira authored
VKMS currently does not handle dumb data, and as a consequence, it does not provide mechanisms for handling gem. This commit adds the necessary support for gem object/handler and the dumb functions. Changes since V1: Daniel Vetter: - Add dumb buffer support to the same patchset Changes since V2: Haneen: - Add missing gem_free_object_unlocked callback to fix the warning "Memory manager not clean during takedown" Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/70b7becc91c6a323dbc15cb5fc912cbdfe4ef7d9.1531359228.git.rodrigosiqueiramelo@gmail.com
-
- 11 Jul, 2018 13 commits
-
-
Noralf Trønnes authored
Commit 894a677f ("drm/cma-helper: Use the generic fbdev emulation") broke almost all drivers that use the CMA helper. The reason is that drm_client_new() requires that the DRM device has been registered, but the drivers register fbdev before registering DRM. Remove the requirement that DRM should be registered when creating a new client. Fixes: c76f0f7c ("drm: Begin an API for in-kernel clients") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Tested-by:
Icenowy Zheng <icenowy@aosc.io> Reviewed-by:
-
Noralf Trønnes authored
include/drm/tinydrm/tinydrm.h:34: warning: Function parameter or member 'fb_dirty' not described in 'tinydrm_device' drivers/gpu/drm/tinydrm/mipi-dbi.c:272: warning: Function parameter or member 'crtc_state' not described in 'mipi_dbi_enable_flush' drivers/gpu/drm/tinydrm/mipi-dbi.c:272: warning: Function parameter or member 'plane_state' not described in 'mipi_dbi_enable_flush' Move struct member docs inline so it's not missed next time. Cc: David Lechner <david@lechnology.com> Signed-off-by:
David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710150518.10528-1-noralf@tronnes.org
-
Vladimir Zapolskiy authored
The change adds support for Sharp LQ035Q7DB03 3.5" QVGA TFT panel. Note that this aged panel is already found in the kernel sources, for instance in board mach files mach-mx21ads.c, mach-mx27ads.c, mach-pcm043.c, lpd270.c and imx27-phytec-phycore-rdk.dts. Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706185101.31186-1-vz@mleia.com
-
Jernej Skrabec authored
They are currently sorted alphabetically. However, they should be sorted by release date of the family and then alphabetically. Fixes: 03c35dbf ("dt-bindings: display: sun4i-drm: Add description of A64 HDMI PHY") Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-19-jernej.skrabec@siol.net
-
Jernej Skrabec authored
Now that R40 TCON migrated to runtime mux configuration, old code can be removed. Reviewed-by:
-
Jernej Skrabec authored
We want to be able to set TCON TOP muxes at runtime. Add helpers for that. Old, static configuration of muxes at probe time is preserved for now. It will be removed when R40 TCON starts using them. Reviewed-by:
-
Jernej Skrabec authored
Includes are not alphabetically ordered. Reorder them. Reviewed-by:
-
Jernej Skrabec authored
If error happens in sun8i_dw_hdmi_find_possible_crtcs(), nodes are not released with of_node_put() before returning. Fix that by calling of_node_put() when necessary. While on it, clean up the code by using of_graph_get_remote_node() which also lowers number of cases where error handling has to be performed. Fixes: 57e23de0 ("drm/sun4i: DW HDMI: Expand algorithm for possible crtcs") Reviewed-by:
-
Jernej Skrabec authored
TCON description is expanded with R40 TV TCON compatible. It is a bit special, because it is connected to TCON TOP instead directly to mixer and it needs special handling. Reviewed-by:
-
Jernej Skrabec authored
Function sun4i_tcon_find_engine_traverse() doesn't release node if it needs to traverse of graph deeper than 1 level. Fix this by calling of_node_put(). Fixes: 49836b11 ("drm/sun4i: tcon: Generalize engine search algorithm") Reviewed-by:
-
Jernej Skrabec authored
There is no need to acquire reference to clock just to get its name. This commit just cleans up the code. There is no functional change. Reviewed-by:
-
Jernej Skrabec authored
R40 has versatile display pipeline. It supports two simultanious outputs on various outputs (TVE, VGA, HDMI, MIPI DSI, LCD). Reviewed-by:
-
Jernej Skrabec authored
R40 has pretty unique display pipeline. It supports two outputs at the same time. Possible outputs: - 1x HDMI, - 2x TV output - 1x VGA, - 1x MIPI DSI and - 2x LCD outputs That is the biggest number of possible outputs from all Allwinner SoC. Because of that, add new compatible for it. Reviewed-by:
-
- 10 Jul, 2018 26 commits
-
-
Thierry Reding authored
Use this helper to get rid of some extra boilerplate code. Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Dan Carpenter authored
The ARRAY_SIZE() macro is type size_t. If s6e8aa0_dcs_read() returns a negative error code, then "ret < ARRAY_SIZE(id)" is false because the negative error code is type promoted to a high positive value. Fixes: 02051ca0 ("drm/panel: add S6E8AA0 driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Nickey Yang authored
The KINGDISPLAY KD097D04 is a 9.7" panel with a 1536x2048 resolution and connected to DSI using 8 lanes. Signed-off-by:
Nickey Yang <nickey.yang@rock-chips.com> Acked-by:
-
Nickey Yang authored
Kingdisplay Technology Co., Ltd, established in China Shenzhen in 2006, is a national high-tech enterprise specializing in the R&D, manufacturing and marketing of TFT-LCM and touch panel. Signed-off-by:
-
Lin Huang authored
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel, it reuse the Innolux P079ZCA panel driver. Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - Document source of init-commands - 4 lanes per DSI interface Signed-off-by:
Lin Huang <hl@rock-chips.com> Signed-off-by:
-
Lin Huang authored
The Innolux P097PFG panel is 9.7" panel with 1536X2048 resolution, it reuse P079ZCA panel driver, so improve p079ZCA dt-binding to support P097PFG. Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - use separate file for binding - keep power supplies as required Signed-off-by:
-
Lin Huang authored
When panel power down, p079zca need delay between reset and disable power supply, but p097pfg does not need it. Similarly p097zca needs a delay after entering panel sleep mode. So add two delay properties, so we can meet these two panel power down sequence. Signed-off-by:
-
Lin Huang authored
Refactor Innolux P079ZCA panel driver, let it support multi panels from Innolux that share similar power sequences. Panels may require different power supplies so use regulator bulk interfaces and define per panel supply-names. Changes in v2: - Change regulator property name to meet the panel datasheet Changes in v3: - this patch only refactor P079ZCA panel to support multi panel, support P097PFG panel in another patch Changes in v4: - Modify the patch which suggest by Thierry Changes in v5: - use regulator_bulk to handle different supply number Signed-off-by:
-
Colin Ian King authored
Currently, ret is being checked for an error condition however it is not being assigned in the previous statement on the call of function mipi_dsi_dcs_exit_sleep_mode. Add in the missing assignment of ret. Detected by CoverityScan, CID#1470174, 1470178 ("Unchecked return value") Fixes: 26aec255 ("drm/panel: Add Ilitek ILI9881c panel driver") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Michal Vokáč authored
This adds support for the DataImage SCF0700C48GGU18 7.0" WVGA (800x480) TFT LCD panel. The panel has 24-bit parallel interface and can be supported by the simple panel driver. Signed-off-by:
Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by:
-
Michal Vokáč authored
DataImage is a Taiwan-based manufacturer of LCD panels. Signed-off-by:
-
Christoph Fritz authored
This patch adds support for Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel. Signed-off-by:
Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by:
-
Tomi Valkeinen authored
Add support for newhaven,nhd-4.3-480272ef-atxl to panel-simple. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Peter Ujfalusi authored
The sync in some panels needs to be driven by different edge of the pixel clock compared to data. This is reflected by the DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in videmode flags. Add similar similar definitions for bus_flags and convert the sync drive edge via drm_bus_flags_from_videomode(). Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
-
Andrzej Hajda authored
The patch adds support for BOE HV070WSA-100 WSVGA 7.01 inch panel to the panel-simple driver. The panel is used in Exynos5250-arndale boards. Signed-off-by:
Maciej Purski <m.purski@samsung.com> Signed-off-by:
-
Andrzej Hajda authored
The patch adds bindings to BOE HV070-WSA WSVGA panel. Bindings are compatible with simple panel bindings. Signed-off-by:
-
Boris Brezillon authored
Having a device with a status property != "okay" in the DT is a valid use case, and we should not prevent the registration of the DRM device when the DSI device connected to the DSI controller is disabled. Consider the ENODEV return code as a valid result and do not expose the DSI encoder/connector when it happens. Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Boris Brezillon authored
There's no point searching for a drm_bridge or drm_panel if the OF node we're pointing has a status property that is not "okay" or "ok". Just return -ENODEV in this case. Signed-off-by:
-
Boris Brezillon authored
DT nodes might be present in the DT but with a status property set to "disabled" or "fail". In this case, we should not return -EPROBE_DEFER when the caller asks for a drm_panel instance. Return -ENODEV instead. Signed-off-by:
-
Boris Brezillon authored
Right now, the DRM panel logic returns NULL when a panel pointing to the passed OF node is not present in the list of registered panels. Most drivers interpret this NULL value as -EPROBE_DEFER, but we are about to modify the semantic of of_drm_find_panel() and let the framework return -ENODEV when the device node we're pointing to has a status property that is not equal to "okay" or "ok". Let's first patch the of_drm_find_panel() implementation to return ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace the '!panel' check by an 'IS_ERR(panel)' one. Signed-off-by:
-
Philipp Zabel authored
This patch adds support for DLC DLC0700YZG-1 1024x600 LVDS panels to the simple-panel driver. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> [m.felsch@pengutronix.de: fix typo in compatible dt-binding] [m.felsch@pengutronix.de: add property bindings] Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
-
Philipp Zabel authored
DLC provides a wide range of display solutions. Website: http://www.dlcdisplay.com/Signed-off-by:
-
Jan Tuerk authored
The Emerging Display Technology ETM0700G0EDH6 is the uses the same panel as the ETM0700G0BDH6. It differs in the hardware design for the backlight and the touchscreen i2c interface. As the new display type has different requirements for drive-strengths on the i2c-bus, add an additional compatible to allow the handling of it or warn about incompatible cpu and display combinations. Signed-off-by:
Jan Tuerk <jan.tuerk@emtrion.com> Signed-off-by:
-
Jan Tuerk authored
The Emerging Display Technology ETM0700G0BDH6 is exactly the same display as the ETM0700G0DH6, exept the pixelclock polarity. Therefore re-use the ETM0700G0DH6 modes. It is used by default on emtrion Avari based development kits. Signed-off-by:
-
Jan Tuerk authored
Document the Emerging Display Technology Corp. (EDT) using the simple-panel binding in one single file. Reviewed-by:
-
Jagan Teki authored
This adds support for the Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Reviewed-by:
-
