- 24 Feb, 2008 7 commits
-
-
David Howells authored
Define SO_MARK for MN10300. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Define HZ as a config option. Signed-off-by:
-
Miklos Szeredi authored
I added a nasty local variable shadowing bug to fuse in 2.6.24, with the result, that the 'default_permissions' mount option is basically ignored. How did this happen? - old err declaration in inner scope - new err getting declared in outer scope - 'return err' from inner scope getting removed - old declaration not being noticed -Wshadow would have saved us, but it doesn't seem practical for the kernel :( More testing would have also saved us :(( Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@kernel.org> Signed-off-by:
-
Chris Snook authored
Make LKDTM depend on BLOCK to prevent build failures with certain configs. Signed-off-by:
Chris Snook <csnook@redhat.com> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
WANG Cong authored
Fix a shadowed variable in arch/um/kernel/mem.c, since there is a global variable has the same name. Cc: Jeff Dike <jdike@linux.intel.com> Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Jeff Dike authored
Update defconfig. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Signed-off-by:
-
Johann Felix Soden authored
If the initrd file has zero-length, the error message should contain the filepath. Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by:
-
- 23 Feb, 2008 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (25 commits) [SCSI] qlogicpt: section fixes [SCSI] mvsas: convert from rough draft to working driver [SCSI] mvsas: Add Marvell 6440 SAS/SATA driver [SCSI] libsas: correctly flush the LU queue on error recovery [SCSI] aic94xx: fix sequencer hang on error recovery [SCSI] st: compile fix when DEBUG set to one [SCSI] stex: stex_internal_copy should be called with sg_count in struct st_ccb [SCSI] stex: stex_direct_copy shouldn't call dma_map_sg [SCSI] lpfc: Balance locking [SCSI] qla4xxx: fix up residual handling [SCSI] libsas: fix error handling [SCSI] arcmsr: fix message allocation [SCSI] mptbase: fix use-after-free's [SCSI] iscsi transport: make 2 functions static [SCSI] lpfc: make lpfc_disable_node() static [SCSI] ips: fix data buffer accessors conversion bug [SCSI] gdth: don't call pci_free_consistent under spinlock [SCSI] qla2xxx: fix compile warning for printk format [SCSI] aic7xx: mitigate HOST_MSG_LOOP invalid SCB ff panic [SCSI] scsi_debug: disable clustering ...
-
Hugh Dickins authored
2.6.25-rc1 percpu changes broke CONFIG_DEBUG_PREEMPT's per_cpu checking on several architectures. On s390, sparc64 and x86 it's been weakened to not checking at all; whereas on powerpc64 it's become too strict, issuing warnings from __raw_get_cpu_var in io_schedule and init_timer for example. Fix this by weakening powerpc's __my_cpu_offset to use the non-checking local_paca instead of get_paca (which itself contains such a check); and strengthening the generic my_cpu_offset to go the old slow way via smp_processor_id when CONFIG_DEBUG_PREEMPT (debug_smp_processor_id is where all the knowledge of what's correct when lives). Signed-off-by:
Hugh Dickins <hugh@veritas.com> Reviewed-by:
Mike Travis <travis@sgi.com> Signed-off-by:
-
Rafael J. Wysocki authored
During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Tested-by:
Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by:
-
Adrian Bunk authored
In current mainline, __devinit qpti_sbus_probe() still is calling __init qpti_chain_add(). Change occurrences of __init to __devinit to fix. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Ke Wei authored
Convert rough draft Marvell 6440 driver to a working driver. Added support for SAS and SATA devices, hotplug, wide port, and expanders. Signed-off-by:
Ke Wei <kewei@marvell.com> Signed-off-by:
-
Jeff Garzik authored
Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Jesse Barnes authored
Make sure the restoration correctly restores the AR registers by flipping the ARX register into index mode before doing anything. Without this, some people have had the text mode restore all green. Signed-off-by:
Jesse Barnes <jesse.barnes@intel.com> Signed-off-by:
-
- 22 Feb, 2008 26 commits
-
-
James Bottomley authored
The current sas_scsi_clear_queue_lu() is wrongly checking for commands which match the pointer to the one passed in. It should be checking for commands which are on the same logical unit as the one passed in. Fix this by checking target pointer and LUN for equality. Signed-off-by: -
James Bottomley authored
The clear nexus I_T and clear nexus I_T_L functions in the aic94xx specify the SUSPEND_TX flag which causes the sequencer to be suspended until it receives a RESUME_TX. Unfortunately, nothing ever sends the resume, so the sequencer on the link is stopped forever, leading to eventual timeouts and I/O errors. Since clear nexus commands are only executed as part of error recovery, it's perfectly fine to keep the sequencer running on the link ... as soon as the recovery function is completed, we'll send it the commands to retry. Signed-off-by: -
Kai Makisara authored
Remove the now useless counting of adjacent pages from the debugging code in to make it compile when DEBUG is set non-zero. Signed-off-by:
Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
FUJITA Tomonori authored
stex_internal_copy copies an in-kernel buffer to a sg list by using scsi_kmap_atomic_sg. Some functions calls stex_internal_copy with sg_count in struct st_ccb, which is the value that dma_map_sg returned. However it might be shorter than the actual number of sg entries (if the IOMMU merged the sg entries). scsi_kmap_atomic_sg doesn't see sg->dma_length so stex_internal_copy should be called with the actual number of sg entries (i.e. scsi_sg_count), because if the sg entries were merged, stex_direct_copy wrongly think that the data length in the sg list is shorter than the actual length. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Ed Lin <ed.lin@promise.com> Signed-off-by:
-
FUJITA Tomonori authored
stex_direct_copy copies an in-kernel buffer to a sg list in order to spoof some SCSI commands. stex_direct_copy calls dma_map_sg and then stex_internal_copy with the value that dma_map_sg returned. It calls scsi_kmap_atomic_sg to copy data. scsi_kmap_atomic_sg doesn't see sg->dma_length so if dma_map_sg merges sg entries, stex_internal_copy gets the smaller number of sg entries than the acutual number, which means it wrongly think that the data length in the sg list is shorter than the actual length. stex_direct_copy shouldn't call dma_map_sg and it doesn't need since this code path doesn't involve dma transfers. This patch removes stex_direct_copy and simply calls stex_internal_copy with the actual number of sg entries. Signed-off-by:
-
Matthew Wilcox authored
Commit 3163f725 introduced locking in lpfc_sli_hbqbuf_fill_hbqs, but missed unlocking on one exit. Reported-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Acked-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
David Somayajulu authored
the check in the residual case has an incorrect test of scsi_status (the logic is reversed, it should be scsi_status != 0 instead of !scsi_status. Since we checked a few lines above that scsi_status was non-zero, just eliminate this test Signed-off-by:
David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by:
-
James Bottomley authored
The libsas error handler has two fairly fatal bugs 1. scsi_sas_task_done calls scsi_eh_finish_cmd() too early. This happens if the task completes after it has been aborted but before the error handler starts up. Because scsi_eh_finish_cmd() decrements host_failed and adds the task to the done list, the error handler start check (host_failed == host_busy) never passes and the eh never starts. 2. The multiple task completion paths sas_scsi_clear_queue_... all simply delete the task from the error queue. This causes it to disappear into the ether, since a command must be placed on the done queue to be finished off by the error handler. This behaviour causes the HBA to hang on pending commands. Fix 1. by moving the SAS_TASK_STATE_ABORTED check to an exit clause at the top of the routine and calling ->scsi_done() unconditionally (it is a nop if the timer has fired). This keeps the task in the error handling queue until the eh starts. Fix 2. by making sure every task goes through task complete followed by scsi_eh_finish_cmd(). Tested this by firing resets across a disk running a hammer test (now it actually survives without hanging the system) Signed-off-by: -
Clemens Ladisch authored
Call free_irq() after iounmap() because other devices could trigger our shared interrupt handler. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
The driver gets Oops with ATI HDMI devices due to the wrong calculation of index for playback streams. This patch fixes it. Reference: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3746Signed-off-by:
-
Sam Ravnborg authored
Fix following warning: WARNING: vmlinux.o(.text+0x11ec01a): Section mismatch in reference from the function setup_card() to the function .devinit.text:snd_usb_caiaq_control_init() setup_card() are only used by init_card(). init_card() are only used by snd_probe() snd_probe() are used for the .probe parameter in usb_driver.probe Annotate them all __devinit to fix the warning. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Takashi Iwai authored
Pin widgets have always one amp-input value regardless of number of connections. The proc file showed values wrongly. Signed-off-by:
-
Takashi Iwai authored
The capture source selection for ADC list with two elements is buggy becaues of a wrong capture mux list. This patch fixes the starting index based on spec->num_adc_nids. Signed-off-by:
-
Takashi Iwai authored
The widget list of capture source selection for ALC883 contains the wrong NIDs. Signed-off-by:
-
Takashi Iwai authored
Don't create vmaster controls if no slaves are found in the given list. This prevents the error due to an empty vmaster control. Signed-off-by:
-
Serge A. Suchkov authored
Attached patch fix race condition in hd_codec generic bound volume/swtich controls oops on this bug can be easy reproduced by two mixer apps on SMP system with PREEMPT kernel dmesg: ALSA /home/ss/ALSA/alsa-driver-1.0.16/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:596: hda_intel: azx_get_response timeout, switching to polling mode: las t cmd=0x014f0900 BUG: unable to handle kernel paging request at virtual address 00070006 printing eip: f8f43e95 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: i915 drm snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss bnep rfcomm hidp l2cap bluetooth w lan_wep acpi_cpufreq coretemp hwmon mmc_block pcspkr psmouse wlan_scan_sta ath_rate_sample snd_hda_intel ath_pci serio_raw wlan tg3 sdhci snd_pcm firewire_o hci mmc_core i2c_i801 snd_timer firewire_core snd_page_alloc ath_hal(P) snd_hwdep snd iTCO_wdt crc_itu_t iTCO_vendor_support shpchp video output acer_acpi b acklight led_class wmi_acer Pid: 3969, comm: gkrellm Tainted: P (2.6.24-jm #4) EIP: 0060:[<f8f43e95>] EFLAGS: 00010292 CPU: 0 EIP is at snd_hda_mixer_bind_ctls_info+0x20/0x43 [snd_hda_intel] EAX: 00000000 EBX: f7478e00 ECX: f763e000 EDX: f764f788 ESI: 00070002 EDI: edce5e00 EBP: edc3fe64 ESP: edc3fe54 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process gkrellm (pid: 3969, ti=edc3e000 task=f1e4e000 task.ti=edc3e000) Stack: f764f77c f7478e00 edce5e00 f6dd6000 edc3fe84 f8e590e8 edc7a239 f6d14034 f764f34c f6c0f7e0 edc3ff30 f6d14034 edc3fea8 f8e591b7 edc3ff30 edc3ff2c 00000000 f70aa668 f6d14034 f8e59165 bfbfadb0 edc3ff40 f8e587aa edc3ff2c Call Trace: [<c0104fbb>] show_trace_log_lvl+0x1a/0x2f [<c010506d>] show_stack_log_lvl+0x9d/0xa5 [<c0105119>] show_registers+0xa4/0x1bd [<c0105354>] die+0x122/0x206 [<c03daccc>] do_page_fault+0x535/0x623 [<c03d940a>] error_code+0x72/0x78 [<f8e590e8>] snd_mixer_oss_get_volume1_vol+0x74/0xf1 [snd_mixer_oss] [<f8e591b7>] snd_mixer_oss_get_volume1+0x52/0xa5 [snd_mixer_oss] [<f8e587aa>] snd_mixer_oss_ioctl1+0x673/0x71e [snd_mixer_oss] [<f8e588af>] snd_mixer_oss_ioctl+0xb/0xd [snd_mixer_oss] [<c017af0a>] do_ioctl+0x22/0x67 [<c017b186>] vfs_ioctl+0x237/0x24a [<c017b1ca>] sys_ioctl+0x31/0x4b [<c010402e>] syscall_call+0x7/0xb ======================= Code: 3f 49 c7 89 f8 59 5b 5e 5f 5d c3 55 89 e5 57 89 d7 56 53 89 c3 83 ec 04 8b 70 5c 8b 40 60 05 7c 01 00 00 89 45 f0 e8 c0 3f 49 c7 <8b> 46 04 89 fa 89 4 3 5c 89 d8 8b 0e ff 11 89 73 5c 89 c7 8b 45 EIP: [<f8f43e95>] snd_hda_mixer_bind_ctls_info+0x20/0x43 [snd_hda_intel] SS:ESP 0068:edc3fe54 ---[ end trace 0a20bc209e9397cc ]--- similar issue report present in ALSA bugtracking system https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3652Signed-off-by:Serge A. Suchkov <Serge.A.S@tochka.ru> Signed-off-by:
-
Roel Kluin authored
In linus' git tree I found this problem. Is it also in the alsa tree? please confirm it's the right fix. The patch was not yet tested. Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Acked-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Clemens Ladisch authored
The GPIO pin 0 of the CM9780 must be set when muting the line input even on non-Xonar cards. Signed-off-by:
-
Takashi Iwai authored
Fixed the SPDIF output on Conexant Cx5045 codec. Added the missing pin output setting and fixed the wrong NID for digital audio-out widget. Signed-off-by:
-
Takashi Iwai authored
This patch enables snoop on Intel SCH chipset, eliminating static during playback. Signed-off-by:
Tobin Davis <tdavis@dsl-only.net> Signed-off-by:
-
Takashi Iwai authored
Removed invalid __devinit from hdsp_request_fw_loader() and snd_hwdep_create_hwdep() that aren't always init functions. Signed-off-by:
-
Takashi Iwai authored
Removed invalid __devinit and __devexit that are remaining after split to a helper module. Signed-off-by:
-
Takashi Iwai authored
The driver resubmits URBs from an error handler and schedules the error handler from the URBs' completion handlers. To reliably kill the cycle a flag must be used. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Takashi Iwai authored
Add proper ifdef's to the patch loading code moved from the old instr layer so that opl3 driver can be compiled without the sequencer support. Signed-off-by:
-
Linus Torvalds authored
It's always been broken, but recent fixes actually made it do something, and now the brokenness shows up as the resulting kernel simply not working at all. So it used to be that you could enable this config option, and it just didn't do anything. Now we'd better stop people from enabling it by mistake, since it _does_ do something, but does it so badly as to be unusable. Code to actually make it work is pending, but incomplete and won't be merged into 2.6.25 in any case. Acked-by:
Arjan van de Ven <arjan@infradead.org> Acked-by:
-
Roland McGrath authored
Simple typo fix for regression introduced by the user_regset changes. Signed-off-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
