- 09 Jan, 2019 40 commits
-
-
Jia-Ju Bai authored
commit c85400f8 upstream. The function r8a66597_endpoint_disable() and r8a66597_urb_enqueue() may be concurrently executed. The two functions both access a possible shared variable "hep->hcpriv". This shared variable is freed by r8a66597_endpoint_disable() via the call path: r8a66597_endpoint_disable kfree(hep->hcpriv) (line 1995 in Linux-4.19) This variable is read by r8a66597_urb_enqueue() via the call path: r8a66597_urb_enqueue spin_lock_irqsave(&r8a66597->lock) init_pipe_info enable_r8a66597_pipe pipe = hep->hcpriv (line 802 in Linux-4.19) The read operation is protected by a spinlock, but the free operation is not protected by this spinlock, thus a concurrency use-after-free bug may occur. To fix this bug, the spin-lock and spin-unlock function calls in r8a66597_endpoint_disable() are moved to protect the free operation. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jörgen Storvist authored
commit 4b2c01ad upstream. Added USB serial option driver support for Fibocom NL678 series cellular module: VID 2cb7 and PIDs 0x0104 and 0x0105. Reserved network and ADB interfaces. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0104 Rev=03.10 S: Manufacturer=Fibocom S: Product=Fibocom NL678-E Modem S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0105 Rev=03.10 S: Manufacturer=Fibocom S: Product=Fibocom NL678-E Modem S: SerialNumber=12345678 C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) Signed-off-by:
Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Scott Chen authored
commit 8d503f20 upstream. Add device ids to pl2303 for the HP POS pole displays: LM920: 03f0:026b TD620: 03f0:0956 LD960TA: 03f0:4439 LD220TA: 03f0:4349 LM940: 03f0:5039 Signed-off-by:
Scott Chen <scott@labau.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Sameer Pujar authored
commit 63d2a9ec upstream. Even after disabling interrupts on the module, it could be possible that irq handlers are still running. System hang is seen during suspend path. It was found that, there were pending writes on the HDA bus and clock was disabled by that time. Above mentioned issue is fixed by clearing any pending irq handlers before disabling clocks and returning from hda suspend. Suggested-by:
Mohan Kumar <mkumard@nvidia.com> Suggested-by:
Dara Ramesh <dramesh@nvidia.com> Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Sakamoto authored
commit 5ef108c5 upstream. An initial commit to add tracepoints for packets without CIP headers uses different print formats for added tracepoints. However this is not convenient for users/developers to prepare debug tools. This commit uses the same format for the two tracepoints. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: b164d2fd ('ALSA: firewire_lib: add tracepoints for packets without CIP headers') Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Takashi Sakamoto authored
commit aa9a9e39 upstream. An initial commit to add tracepoints for packets without CIP headers introduces a wrong assignment to 'data_blocks' value of 'out_packet_without_header' tracepoint. This commit fixes the bug. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: b164d2fd ('ALSA: firewire_lib: add tracepoints for packets without CIP headers') Signed-off-by:
-
Takashi Sakamoto authored
commit ada79fa5 upstream. In IEC 61883-1/6 engine of ALSA firewire stack, a packet handler has a second argument for 'the number of bytes in payload of isochronous packet'. However, an incoming packet handler without CIP header uses the value as 'the number of quadlets in the payload'. This brings userspace applications to receive the number of PCM frames as four times against real time. This commit fixes the bug. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 3b196c39 ('ALSA: firewire-lib: add no-header packet processing') Signed-off-by:
-
Takashi Sakamoto authored
commit 3d16200a upstream. According to my memo at hand and saved records, writing 0x00000001 to SND_FF_REG_FETCH_PCM_FRAMES disables fetching PCM frames in corresponding channel, however current implement uses reversed logic. This results in muted volume in device side during playback. This commit corrects the bug. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 76fdb3a9 ('ALSA: fireface: add support for Fireface 400') Signed-off-by:
-
Mantas Mikulėnas authored
commit 40906ebe upstream. Tested with 4.19.9. v2: Changed from CXT_FIXUP_MUTE_LED_GPIO to CXT_FIXUP_HP_DOCK because that's what the existing fixups for EliteBooks use. Signed-off-by:
Mantas Mikulėnas <grawity@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 2a9d92fb upstream. I ran into a link-time error with the atmel-quadspi driver on the EBSA110 platform: drivers/mtd/built-in.o: In function `atmel_qspi_run_command': :(.text+0x1ee3c): undefined reference to `_memcpy_toio' :(.text+0x1ee48): undefined reference to `_memcpy_fromio' The problem is that _memcpy_toio/_memcpy_fromio are not available on that platform, and we have to prevent building the driver there. In case we want to backport this to older kernels: between linux-4.8 and linux-4.20, the Kconfig entry was in drivers/mtd/spi-nor/Kconfig but had the same problem. Link: https://lore.kernel.org/patchwork/patch/812860/ Fixes: 161aaab8 ("mtd: atmel-quadspi: add driver for Atmel QSPI controller") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Gustavo A. R. Silva authored
commit 4aea96f4 upstream. info.mode and info.port are indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. These issues were detected with the help of Smatch: sound/synth/emux/emux_hwdep.c:72 snd_emux_hwdep_misc_mode() warn: potential spectre issue 'emu->portptrs[i]->ctrls' [w] (local cap) sound/synth/emux/emux_hwdep.c:75 snd_emux_hwdep_misc_mode() warn: potential spectre issue 'emu->portptrs' [w] (local cap) sound/synth/emux/emux_hwdep.c:75 snd_emux_hwdep_misc_mode() warn: potential spectre issue 'emu->portptrs[info.port]->ctrls' [w] (local cap) Fix this by sanitizing both info.mode and info.port before using them to index emu->portptrs[i]->ctrls, emu->portptrs[info.port]->ctrls and emu->portptrs. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Gustavo A. R. Silva authored
commit 94ffb030 upstream. stream is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: sound/core/pcm.c:140 snd_pcm_control_ioctl() warn: potential spectre issue 'pcm->streams' [r] (local cap) Fix this by sanitizing stream before using it to index pcm->streams Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2Signed-off-by:
-
Gustavo A. R. Silva authored
commit 5ae4f61f upstream. ipcm->substream is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: sound/pci/emu10k1/emufx.c:1031 snd_emu10k1_ipcm_poke() warn: potential spectre issue 'emu->fx8010.pcm' [r] (local cap) sound/pci/emu10k1/emufx.c:1075 snd_emu10k1_ipcm_peek() warn: potential spectre issue 'emu->fx8010.pcm' [r] (local cap) Fix this by sanitizing ipcm->substream before using it to index emu->fx8010.pcm Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
-
Gustavo A. R. Silva authored
commit 0b84304e upstream. info->channel is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: sound/pci/rme9652/hdsp.c:4100 snd_hdsp_channel_info() warn: potential spectre issue 'hdsp->channel_map' [r] (local cap) Fix this by sanitizing info->channel before using it to index hdsp->channel_map Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. Also, notice that I refactored the code a bit in order to get rid of the following checkpatch warning: ERROR: do not use assignment in if condition FILE: sound/pci/rme9652/hdsp.c:4103: if ((mapped_channel = hdsp->channel_map[info->channel]) < 0) [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
-
Michael J. Ruhl authored
commit dbc2970c upstream. An incorrect sge sizing in the HFI PIO path will cause an OOPs similar to this: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] hfi1_verbs_send_pio+0x3d8/0x530 [hfi1] PGD 0 Oops: 0000 1 SMP Call Trace: ? hfi1_verbs_send_dma+0xad0/0xad0 [hfi1] hfi1_verbs_send+0xdf/0x250 [hfi1] ? make_rc_ack+0xa80/0xa80 [hfi1] hfi1_do_send+0x192/0x430 [hfi1] hfi1_do_send_from_rvt+0x10/0x20 [hfi1] rvt_post_send+0x369/0x820 [rdmavt] ib_uverbs_post_send+0x317/0x570 [ib_uverbs] ib_uverbs_write+0x26f/0x420 [ib_uverbs] ? security_file_permission+0x21/0xa0 vfs_write+0xbd/0x1e0 ? mntput+0x24/0x40 SyS_write+0x7f/0xe0 system_call_fastpath+0x16/0x1b Fix by adding the missing sizing check to correctly determine the sge length. Fixes: 77241056 ("IB/hfi1: add driver files") Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Deepa Dinamani authored
[ Upstream commit 3a0ed3e9 ] Al Viro mentioned (Message-ID <20170626041334.GZ10672@ZenIV.linux.org.uk>) that there is probably a race condition lurking in accesses of sk_stamp on 32-bit machines. sock->sk_stamp is of type ktime_t which is always an s64. On a 32 bit architecture, we might run into situations of unsafe access as the access to the field becomes non atomic. Use seqlocks for synchronization. This allows us to avoid using spinlocks for readers as readers do not need mutual exclusion. Another approach to solve this is to require sk_lock for all modifications of the timestamps. The current approach allows for timestamps to have their own lock: sk_stamp_lock. This allows for the patch to not compete with already existing critical sections, and side effects are limited to the paths in the patch. The addition of the new field maintains the data locality optimizations from commit 9115e8cd ("net: reorganize struct sock for better data locality") Note that all the instances of the sk_stamp accesses are either through the ioctl or the syscall recvmsg. Signed-off-by:
Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Myungho Jung authored
[ Upstream commit 78abe3d0 ] clcsock can be released while kernel_accept() references it in TCP listen worker. Also, clcsock needs to wake up before released if TCP fallback is used and the clcsock is blocked by accept. Add a lock to safely release clcsock and call kernel_sock_shutdown() to wake up clcsock from accept in smc_release(). Reported-by: syzbot+0bf2e01269f1274b4b03@syzkaller.appspotmail.com Reported-by: syzbot+e3132895630f957306bc@syzkaller.appspotmail.com Signed-off-by:
Myungho Jung <mhjungk@gmail.com> Signed-off-by:
-
Jörgen Storvist authored
[ Upstream commit 7c3db410 ] Added support for Fibocom NL678 series cellular module QMI interface. Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x40 series chipsets. Signed-off-by:
-
Jörgen Storvist authored
[ Upstream commit 110a1cc2 ] Added support for Fibocom NL668 series QMI interface. Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x07 chipsets. Signed-off-by:
-
Cong Wang authored
[ Upstream commit fb83ed49 ] When TIPC_NLA_UDP_REMOTE is an IPv6 mcast address but TIPC_NLA_UDP_LOCAL is an IPv4 address, a NULL-ptr deref is triggered as the UDP tunnel sock is initialized to IPv4 or IPv6 sock merely based on the protocol in local address. We should just error out when the remote address and local address have different protocols. Reported-by: syzbot+eb4da3a20fad2e52555d@syzkaller.appspotmail.com Cc: Ying Xue <ying.xue@windriver.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 15ef70e2 ] lock_sock() must be used in process context to be race-free with other lock_sock() callers, for example, tipc_release(). Otherwise using the spinlock directly can't serialize a parallel tipc_release(). As it is blocking, we have to hold the sock refcnt before rhashtable_walk_stop() and release it after rhashtable_walk_start(). Fixes: 07f6c4bc ("tipc: convert tipc reference table to use generic rhashtable") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Alaa Hleihel authored
[ Upstream commit 47654204 ] mlx5 driver falsely advertises support of software timestamping. Fix it by removing the false indication. Fixes: ef9814de ("net/mlx5e: Add HW timestamping (TS) support") Signed-off-by:
Alaa Hleihel <alaa@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Shalom Toledo authored
[ Upstream commit cf0b70e7 ] During the firmware flash process, some of the EMADs get timed out, which causes the driver to send them again with a limit of 5 retries. There are some situations in which 5 retries is not enough and the EMAD access fails. If the failed EMAD was related to the flashing process, the driver fails the flashing. The reason for these timeouts during firmware flashing is cache misses in the CPU running the firmware. In case the CPU needs to fetch instructions from the flash when a firmware is flashed, it needs to wait for the flashing to complete. Since flashing takes time, it is possible for pending EMADs to timeout. Fix by increasing EMADs' timeout while flashing firmware. Fixes: ce6ef68f ("mlxsw: spectrum: Implement the ethtool flash_device callback") Signed-off-by:
Shalom Toledo <shalomt@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
[ Upstream commit bfc69825 ] When the completion queue of the RQ is empty, do not immediately return. If left-over decompressed CQEs (from the previous cycle) were processed, need to go to the finalization part of the poll function. Bug exists only when CQE compression is turned ON. This solves the following issue: mlx5_core 0000:82:00.1: mlx5_eq_int:544:(pid 0): CQ error on CQN 0xc08, syndrome 0x1 mlx5_core 0000:82:00.1 p4p2: mlx5e_cq_error_event: cqn=0x000c08 event=0x04 Fixes: 4b7dfc99 ("net/mlx5e: Early-return on empty completion queues") Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Yuval Avnery authored
[ Upstream commit f0337889 ] Expression terminated with "," instead of ";", resulted in set_fte getting bad value for modify_enable_mask field. Fixes: bd5251db ("net/mlx5_core: Introduce flow steering destination of type counter") Signed-off-by:
Yuval Avnery <yuvalav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Juergen Gross authored
[ Upstream commit d81c5054 ] At least old Xen net backends seem to send frags with no real data sometimes. In case such a fragment happens to occur with the frag limit already reached the frontend will BUG currently even if this situation is easily recoverable. Modify the BUG_ON() condition accordingly. Tested-by:
Dietmar Hahn <dietmar.hahn@ts.fujitsu.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Jorgen Hansen authored
[ Upstream commit a915b982 ] If a server side socket is bound to an address, but not in the listening state yet, incoming connection requests should receive a reset control packet in response. However, the function used to send the reset silently drops the reset packet if the sending socket isn't bound to a remote address (as is the case for a bound socket not yet in the listening state). This change fixes this by using the src of the incoming packet as destination for the reset packet in this case. Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Reviewed-by:
Adit Ranadive <aditr@vmware.com> Reviewed-by:
Vishnu Dasa <vdasa@vmware.com> Signed-off-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 841df922 ] We miss a write barrier that guarantees used idx is updated and seen before log. This will let userspace sync and copy used ring before used idx is update. Fix this by adding a barrier before log_write(). Fixes: 8dd014ad ("vhost-net: mergeable buffers support") Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit acb4a33e ] tipc_udp_xmit() drops the packet on error, there is no need to drop it again. Fixes: ef20cd4d ("tipc: introduce UDP replicast") Reported-and-tested-by: syzbot+eae585ba2cc2752d3704@syzkaller.appspotmail.com Cc: Ying Xue <ying.xue@windriver.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit f0c928d8 ] Alexei reported use after frees in inet_diag_dump_icsk() [1] Because we use refcount_set() when various sockets are setup and inserted into ehash, we also need to make sure inet_diag_dump_icsk() wont race with the refcount_set() operations. Jonathan Lemon sent a patch changing net_twsk_hashdance() but other spots would need risky changes. Instead, fix inet_diag_dump_icsk() as this bug came with linux-4.10 only. [1] Quoting Alexei : First something iterating over sockets finds already freed tw socket: refcount_t: increment on 0; use-after-free. WARNING: CPU: 2 PID: 2738 at lib/refcount.c:153 refcount_inc+0x26/0x30 RIP: 0010:refcount_inc+0x26/0x30 RSP: 0018:ffffc90004c8fbc0 EFLAGS: 00010282 RAX: 000000000000002b RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88085ee9d680 RSI: ffff88085ee954c8 RDI: ffff88085ee954c8 RBP: ffff88010ecbd2c0 R08: 0000000000000000 R09: 000000000000174c R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8806ba9bf210 R14: ffffffff82304600 R15: ffff88010ecbd328 FS: 00007f81f5a7d700(0000) GS:ffff88085ee80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f81e2a95000 CR3: 000000069b2eb006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: inet_diag_dump_icsk+0x2b3/0x4e0 [inet_diag] // sock_hold(sk); in net/ipv4/inet_diag.c:1002 ? kmalloc_large_node+0x37/0x70 ? __kmalloc_node_track_caller+0x1cb/0x260 ? __alloc_skb+0x72/0x1b0 ? __kmalloc_reserve.isra.40+0x2e/0x80 __inet_diag_dump+0x3b/0x80 [inet_diag] netlink_dump+0x116/0x2a0 netlink_recvmsg+0x205/0x3c0 sock_read_iter+0x89/0xd0 __vfs_read+0xf7/0x140 vfs_read+0x8a/0x140 SyS_read+0x3f/0xa0 do_syscall_64+0x5a/0x100 then a minute later twsk timer fires and hits two bad refcnts for this freed socket: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 31 PID: 0 at lib/refcount.c:228 refcount_dec+0x2e/0x40 Modules linked in: RIP: 0010:refcount_dec+0x2e/0x40 RSP: 0018:ffff88085f5c3ea8 EFLAGS: 00010296 RAX: 000000000000002c RBX: ffff88010ecbd2c0 RCX: 000000000000083f RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f RBP: ffffc90003c77280 R08: 0000000000000000 R09: 00000000000017d3 R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffffffff82ad2d80 R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> inet_twsk_kill+0x9d/0xc0 // inet_twsk_bind_unhash(tw, hashinfo); call_timer_fn+0x29/0x110 run_timer_softirq+0x36b/0x3a0 refcount_t: underflow; use-after-free. WARNING: CPU: 31 PID: 0 at lib/refcount.c:187 refcount_sub_and_test+0x46/0x50 RIP: 0010:refcount_sub_and_test+0x46/0x50 RSP: 0018:ffff88085f5c3eb8 EFLAGS: 00010296 RAX: 0000000000000026 RBX: ffff88010ecbd2c0 RCX: 000000000000083f RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f RBP: ffff88010ecbd358 R08: 0000000000000000 R09: 000000000000185b R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffff88010ecbd358 R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> inet_twsk_put+0x12/0x20 // inet_twsk_put(tw); call_timer_fn+0x29/0x110 run_timer_softirq+0x36b/0x3a0 Fixes: 67db3e4b ("tcp: no longer hold ehash lock while calling tcp_get_info()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Alexei Starovoitov <ast@kernel.org> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 4a2eb0c3 ] syzbot reported a kernel-infoleak, which is caused by an uninitialized field(sin6_flowinfo) of addr->a.v6 in sctp_inet6addr_event(). The call trace is as below: BUG: KMSAN: kernel-infoleak in _copy_to_user+0x19a/0x230 lib/usercopy.c:33 CPU: 1 PID: 8164 Comm: syz-executor2 Not tainted 4.20.0-rc3+ #95 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x32d/0x480 lib/dump_stack.c:113 kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683 kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743 kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634 _copy_to_user+0x19a/0x230 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:183 [inline] sctp_getsockopt_local_addrs net/sctp/socket.c:5998 [inline] sctp_getsockopt+0x15248/0x186f0 net/sctp/socket.c:7477 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:2937 __sys_getsockopt+0x489/0x550 net/socket.c:1939 __do_sys_getsockopt net/socket.c:1950 [inline] __se_sys_getsockopt+0xe1/0x100 net/socket.c:1947 __x64_sys_getsockopt+0x62/0x80 net/socket.c:1947 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 sin6_flowinfo is not really used by SCTP, so it will be fixed by simply setting it to 0. The issue exists since very beginning. Thanks Alexander for the reproducer provided. Reported-by: syzbot+ad5d327e6936a2e284be@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Jörgen Storvist authored
[ Upstream commit 1986af16 ] Added support for the Telit LN940 series cellular modules QMI interface. QMI_QUIRK_SET_DTR quirk requied for Qualcomm MDM9x40 chipset. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Cong Wang authored
[ Upstream commit aff6db45 ] __ptr_ring_swap_queue() tries to move pointers from the old ring to the new one, but it forgets to check if ->producer is beyond the new size at the end of the operation. This leads to an out-of-bound access in __ptr_ring_produce() as reported by syzbot. Reported-by: syzbot+8993c0fa96d57c399735@syzkaller.appspotmail.com Fixes: 5d49de53 ("ptr_ring: resize support") Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 6b8d95f1 ] Validate packet socket address length if a length is given. Zero length is equivalent to not setting an address. Fixes: 99137b78 ("packet: validate address length") Reported-by:
Ido Schimmel <idosch@idosch.org> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 99137b78 ] Packet sockets with SOCK_DGRAM may pass an address for use in dev_hard_header. Ensure that it is of sufficient length. Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit d5c7c745 ] When x25_asy_open() fails, it already cleans up by itself, so its caller doesn't need to free the memory again. It seems we still have to call x25_asy_free() to clear the SLF_INUSE bit, so just set these pointers to NULL after kfree(). Reported-and-tested-by: syzbot+5e5e969e525129229052@syzkaller.appspotmail.com Fixes: 3b780bed ("x25_asy: Free x25_asy on x25_asy_open() failure.") Signed-off-by:
-
Cong Wang authored
[ Upstream commit 7314f548 ] nr_find_socket(), nr_find_peer() and nr_find_listener() lock the sock after finding it in the global list. However, the call path requires BH disabled for the sock lock consistently. Actually the locking is unnecessary at this point, we can just hold the sock refcnt to make sure it is not gone after we unlock the global list, and lock it later only when needed. Reported-and-tested-by: syzbot+f621cda8b7e598908efa@syzkaller.appspotmail.com Signed-off-by:
-
Kunihiko Hayashi authored
[ Upstream commit 8742beb5 ] Even though the link is down before entering hibernation, there is an issue that the network interface always links up after resuming from hibernation. If the link is still down before enabling the network interface, and after resuming from hibernation, the phydev->state is forcibly set to PHY_UP in mdio_bus_phy_restore(), and the link becomes up. In suspend sequence, only if the PHY is attached, mdio_bus_phy_suspend() calls phy_stop_machine(), and mdio_bus_phy_resume() calls phy_start_machine(). In resume sequence, it's enough to do the same as mdio_bus_phy_resume() because the state has been preserved. This patch fixes the issue by calling phy_start_machine() in mdio_bus_phy_restore() in the same way as mdio_bus_phy_resume(). Fixes: bc87922f ("phy: Move PHY PM operations into phy_device") Suggested-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by:
-
Claudiu Beznea authored
[ Upstream commit 42983885 ] On some platforms (currently detected only on SAMA5D4) TX might stuck even the pachets are still present in DMA memories and TX start was issued for them. This happens due to race condition between MACB driver updating next TX buffer descriptor to be used and IP reading the same descriptor. In such a case, the "TX USED BIT READ" interrupt is asserted. GEM/MACB user guide specifies that if a "TX USED BIT READ" interrupt is asserted TX must be restarted. Restart TX if used bit is read and packets are present in software TX queue. Packets are removed from software TX queue if TX was successful for them (see macb_tx_interrupt()). Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Michal Kubecek authored
[ Upstream commit ade44640 ] Since commit 7969e5c4 ("ip: discard IPv4 datagrams with overlapping segments.") IPv4 reassembly code drops the whole queue whenever an overlapping fragment is received. However, the test is written in a way which detects duplicate fragments as overlapping so that in environments with many duplicate packets, fragmented packets may be undeliverable. Add an extra test and for (potentially) duplicate fragment, only drop the new fragment rather than the whole queue. Only starting offset and length are checked, not the contents of the fragments as that would be too expensive. For similar reason, linear list ("run") of a rbtree node is not iterated, we only check if the new fragment is a subset of the interval covered by existing consecutive fragments. v2: instead of an exact check iterating through linear list of an rbtree node, only check if the new fragment is subset of the "run" (suggested by Eric Dumazet) Fixes: 7969e5c4 ("ip: discard IPv4 datagrams with overlapping segments.") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
