- 29 Nov, 2013 24 commits
-
-
Rafael J. Wysocki authored
commit 176a88d7 upstream. According to the ACPI spec (5.0, Section 6.3.5), the "Device insertion in progress (pending)" (0x80) _OST status code is reserved for the "Insertion Processing" (0x200) source event which is "a result of an OSPM action". Specifically, it is not a notification, so that status code should not be used during notification processing, which unfortunately is done by acpi_scan_bus_device_check(). For this reason, drop the ACPI_OST_SC_INSERT_IN_PROGRESS _OST status evaluation from there (it was a mistake to put it in there in the first place). Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rafael J. Wysocki authored
commit 2441191a upstream. It is required to do get_device() on the struct acpi_device in question before passing it to acpi_bus_hot_remove_device() through acpi_os_hotplug_execute(), because acpi_bus_hot_remove_device() calls acpi_scan_hot_remove() that does put_device() on that object. The ACPI PCI root removal routine, handle_root_bridge_removal(), doesn't do that, which may lead to premature freeing of the device object or to executing put_device() on an object that has been freed already. Fix this problem by making handle_root_bridge_removal() use get_device() as appropriate. Signed-off-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
-
Aaron Lu authored
commit 2c62333a upstream. Some firmware doesn't initialize initial backlight level to a proper value and _BQC will return 0 on first time evaluation. We used to be able to detect such incorrect value with our code logic, as value 0 normally isn't a valid value in _BCL. But with the introduction of Win8, firmware begins to fill _BCL with values from 0 to 100, now 0 becomes a valid value but that value will make user's screen black. This patch test initial _BQC for value 0, if such a value is returned, do not use it. References: https://bugzilla.kernel.org/show_bug.cgi?id=64031 References: https://bugzilla.kernel.org/show_bug.cgi?id=61231 References: https://bugzilla.kernel.org/show_bug.cgi?id=63111Reported-by:
Qingshuai Tian <qingshuai.tian@intel.com> Tested-by: Aaron Lu <aaron.lu@intel.com> # on "Idealpad u330p" Reported-and-tested-by: <erno@iki.fi> # on "Acer Aspire V5-573G" Reported-and-tested-by: Kirill Tkhai <tkhai@yandex.ru> # on "HP 250 G1" Signed-off-by:
Aaron Lu <aaron.lu@intel.com> Signed-off-by:
-
Puneet Kumar authored
commit 36b15875 upstream. A bug was introduced by commit b76b51ba ('ACPI / EC: Add more debug info and trivial code cleanup') that erroneously caused the struct member to be accessed before acquiring the required lock. This change fixes it by ensuring the lock acquisition is done first. Found by Aaron Durbin <adurbin@chromium.org> Fixes: b76b51ba ('ACPI / EC: Add more debug info and trivial code cleanup') References: http://crbug.com/319019Signed-off-by:
Puneet Kumar <puneetster@chromium.org> Reviewed-by:
Aaron Durbin <adurbin@chromium.org> [olof: Commit message reworded a bit] Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Steven Rostedt authored
commit 12ae030d upstream. The current default perf paranoid level is "1" which has "perf_paranoid_kernel()" return false, and giving any operations that use it, access to normal users. Unfortunately, this includes function tracing and normal users should not be allowed to enable function tracing by default. The proper level is defined at "-1" (full perf access), which "perf_paranoid_tracepoint_raw()" will only give access to. Use that check instead for enabling function tracing. Reported-by:
Dave Jones <davej@redhat.com> Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Tested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Bjorn Helgaas authored
commit 6d3a1741 upstream. Previously we allowed callers to access Slot Capabilities, Status, and Control for Root Ports even if the Root Port did not implement a slot. This seems dubious because the spec only requires these registers if a slot is implemented. It's true that even Root Ports without slots must have *space* for these slot registers, because the Root Capabilities, Status, and Control registers are after the slot registers in the capability. However, for a v1 PCIe Capability, the *semantics* of the slot registers are undefined unless a slot is implemented. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-By:
Jiang Liu <jiang.liu@huawei.com> Acked-by:
Myron Stowe <myron.stowe@redhat.com> Signed-off-by:
-
Bjorn Helgaas authored
commit c8b303d0 upstream. Previously we relied on the PCIe r3.0, sec 7.8, spec language that says "For Functions that do not implement the [Link, Slot, Root] registers, these spaces must be hardwired to 0b," which means that for v2 PCIe capabilities, we don't need to check the device type at all. But it's simpler if we don't need to check the capability version at all, and I think the spec is explicit enough about which registers are required for which types that we can remove the version checks. Signed-off-by:
-
Bjorn Helgaas authored
commit d3694d4f upstream. Every PCIe device has a link, except Root Complex Integrated Endpoints and Root Complex Event Collectors. Previously we didn't give access to PCIe capability link-related registers for Upstream Ports, Downstream Ports, and Bridges, so attempts to read PCI_EXP_LNKCTL incorrectly returned zero. See PCIe spec r3.0, sec 7.8 and 1.3.2.3. Reference: http://lkml.kernel.org/r/979A8436335E3744ADCD3A9F2A2B68A52AD136BE@SJEXCHMB10.corp.ad.broadcom.comReported-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
-
Peter Zijlstra authored
commit ea811747 upstream. Mike reported that commit 7d1a9417 ("x86: Use generic idle loop") regressed several workloads and caused excessive reschedule interrupts. The patch in question failed to notice that the x86 code had an inverted sense of the polling state versus the new generic code (x86: default polling, generic: default !polling). Fix the two prominent x86 mwait based idle drivers and introduce a few new generic polling helpers (fixing the wrong smp_mb__after_clear_bit usage). Also switch the idle routines to using tif_need_resched() which is an immediate TIF_NEED_RESCHED test as opposed to need_resched which will end up being slightly different. Reported-by:
Mike Galbraith <bitbucket@online.de> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: lenb@kernel.org Cc: tglx@linutronix.de Link: http://lkml.kernel.org/n/tip-nc03imb0etuefmzybzj7sprf@git.kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Adamson authored
commit f1ff0c27 upstream. The NFS layer needs to know when a key has expired. This change also returns -EKEYEXPIRED to the application, and the informative "Key has expired" error message is displayed. The user then knows that credential renewal is required. Signed-off-by:
Andy Adamson <andros@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Ilia Mirkin authored
commit 02d69294 upstream. Commits 0a9e2b95 (drm/nvd0/disp: move HDA codec setup to core) and a4feaf4e (drm/nva3/disp: move hda codec handling to core) moved code around but neglected to fill data up to 0x60 as before. This caused /proc/asound/cardN/eld#3.0 to show eld_valid as 0. With this patch, that file is again populated with the correct data. See https://bugs.freedesktop.org/show_bug.cgi?id=67051Reported-and-tested-by:
Alex <alupu01@gmail.com> Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Emil Velikov authored
commit 9a7046d5 upstream. Unused and irrelavant since the code move of DP training/linkcontrol interrupt Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
-
Greg Thelen authored
commit a399b29d upstream. When IPC_RMID races with other shm operations there's potential for use-after-free of the shm object's associated file (shm_file). Here's the race before this patch: TASK 1 TASK 2 ------ ------ shm_rmid() ipc_lock_object() shmctl() shp = shm_obtain_object_check() shm_destroy() shum_unlock() fput(shp->shm_file) ipc_lock_object() shmem_lock(shp->shm_file) <OOPS> The oops is caused because shm_destroy() calls fput() after dropping the ipc_lock. fput() clears the file's f_inode, f_path.dentry, and f_path.mnt, which causes various NULL pointer references in task 2. I reliably see the oops in task 2 if with shmlock, shmu This patch fixes the races by: 1) set shm_file=NULL in shm_destroy() while holding ipc_object_lock(). 2) modify at risk operations to check shm_file while holding ipc_object_lock(). Example workloads, which each trigger oops... Workload 1: while true; do id=$(shmget 1 4096) shm_rmid $id & shmlock $id & wait done The oops stack shows accessing NULL f_inode due to racing fput: _raw_spin_lock shmem_lock SyS_shmctl Workload 2: while true; do id=$(shmget 1 4096) shmat $id 4096 & shm_rmid $id & wait done The oops stack is similar to workload 1 due to NULL f_inode: touch_atime shmem_mmap shm_mmap mmap_region do_mmap_pgoff do_shmat SyS_shmat Workload 3: while true; do id=$(shmget 1 4096) shmlock $id shm_rmid $id & shmunlock $id & wait done The oops stack shows second fput tripping on an NULL f_inode. The first fput() completed via from shm_destroy(), but a racing thread did a get_file() and queued this fput(): locks_remove_flock __fput ____fput task_work_run do_notify_resume int_signal Fixes: c2c737a0 ("ipc,shm: shorten critical region for shmat") Fixes: 2caacaa8 ("ipc,shm: shorten critical region for shmctl") Signed-off-by:
Greg Thelen <gthelen@google.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jesper Nilsson authored
commit 3a72660b upstream. Commit 2caacaa8 ("ipc,shm: shorten critical region for shmctl") restructured the ipc shm to shorten critical region, but introduced a path where the return value could be -EPERM, even if the operation actually was performed. Before the commit, the err return value was reset by the return value from security_shm_shmctl() after the if (!ns_capable(...)) statement. Now, we still exit the if statement with err set to -EPERM, and in the case of SHM_UNLOCK, it is not reset at all, and used as the return value from shmctl. To fix this, we only set err when errors occur, leaving the fallthrough case alone. Signed-off-by:
Jesper Nilsson <jesper.nilsson@axis.com> Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Michel Lespinasse <walken@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Markus Pargmann authored
commit 5d0f801a upstream. If we handle end of block messages with higher priority than a lost message, we can run into an endless interrupt loop. This is reproducable with a am335x processor and "cansequence -r" at 1Mbit. As soon as we loose a packet we can't escape from an interrupt loop. This patch fixes the problem by handling lost packets before EOB packets. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Herbert Xu authored
commit f262f0f5 upstream. The cbc-aes-s390 algorithm incorrectly places the IV in the tfm data structure. As the tfm is shared between multiple threads, this introduces a possibility of data corruption. This patch fixes this by moving the parameter block containing the IV and key onto the stack (the block is 48 bytes long). The same bug exists elsewhere in the s390 crypto system and they will be fixed in subsequent patches. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Neil Horman authored
commit 714b33d1 upstream. Stephan Mueller reported to me recently a error in random number generation in the ansi cprng. If several small requests are made that are less than the instances block size, the remainder for loop code doesn't increment rand_data_valid in the last iteration, meaning that the last bytes in the rand_data buffer gets reused on the subsequent smaller-than-a-block request for random data. The fix is pretty easy, just re-code the for loop to make sure that rand_data_valid gets incremented appropriately Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Stephan Mueller <stephan.mueller@atsec.com> CC: Stephan Mueller <stephan.mueller@atsec.com> CC: Petr Matousek <pmatouse@redhat.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Olivier Sobrie authored
commit 896e23bd upstream. Some devices, like the Kvaser Memorator Professional, have several bulk in endpoints. Only the first one found must be used by the driver. The same holds for the bulk out endpoint. The official Kvaser driver (leaf) was used as reference for this patch. Signed-off-by:
Olivier Sobrie <olivier@sobrie.be> Signed-off-by:
-
Johan Hovold authored
commit a91ccd26 upstream. Make sure to return errors from tiocmget rather than rely on uninitialised stack data. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Bob Moore authored
commit 4be4be8f upstream. This change fixes a problem where a Store operation to an ArgX object that contained a reference to a field object did not complete the automatic dereference and then write to the actual field object. Instead, the object type of the field object was inadvertently changed to match the type of the source operand. The new behavior will actually write to the field object (buffer field or field unit), thus matching the correct ACPI-defined behavior. Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
-
Bob Moore authored
commit a50abf48 upstream. Disallow the dereference of a reference (via index) to an uninitialized package element. Provides compatibility with other ACPI implementations. ACPICA BZ 1003. References: https://bugs.acpica.org/show_bug.cgi?id=431Signed-off-by:
-
Mahesh Rajashekhara authored
commit b4789b8e upstream. It appears that driver runs into a problem here if fibsize is too small because we allocate user_srbcmd with fibsize size only but later we access it until user_srbcmd->sg.count to copy it over to srbcmd. It is not correct to test (fibsize < sizeof(*user_srbcmd)) because this structure already includes one sg element and this is not needed for commands without data. So, we would recommend to add the following (instead of test for fibsize == 0). Signed-off-by:
Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> Reported-by:
Nico Golde <nico@ngolde.de> Reported-by:
Fabian Yamaguchi <fabs@goesec.de> Signed-off-by:
-
Dan Carpenter authored
commit a497e47d upstream. If we do a zero size allocation then it will oops. Also we can't be sure the user passes us a NUL terminated string so I've added a terminator. This code can only be triggered by root. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
-
Bob Moore authored
commit 63660e05 upstream. Previously, references to these objects were resolved only to the actual FieldUnit or BufferField object. The correct behavior is to resolve these references to an actual value. The problem is that DerefOf did not resolve these objects to actual values. An "Integer" object is simple, return the value. But a field in an operation region will require a read operation. For a BufferField, the appropriate data must be extracted from the parent buffer. NOTE: It appears that this issues is present in Windows7 but not Windows8. Signed-off-by:
-
- 20 Nov, 2013 16 commits
-
-
Greg Kroah-Hartman authored
-
Dan Carpenter authored
commit 47c32ec9 upstream. The "i < " part of the "i < ARRAY_SIZE()" condition was missing. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Xenia Ragiadakou authored
commit 9df89d85 upstream. This patch sets the lpm_capable field for root hubs with LPM capabilities. Signed-off-by:
Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by:
Martin MOKREJS <mmokrejs@gmail.com> Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Krzysztof Mazur authored
commit e58547eb upstream. Ignoring usb_hub_create_port_device() errors cause later NULL pointer deference when uninitialized hub->ports[i] entries are dereferenced after port memory allocation error. Signed-off-by:
Krzysztof Mazur <krzysiek@podlesie.net> Acked-by:
-
Krzysztof Mazur authored
commit d0308d4b upstream. If the hub_configure() fails after setting the hdev->maxchild the hub->ports might be NULL or point to uninitialized kzallocated memory causing NULL pointer dereference in hub_quiesce() during cleanup. Now after such error the hdev->maxchild is set to 0 to avoid cleanup of uninitialized ports. Signed-off-by:
-
Johan Hovold authored
commit 9d3fde86 upstream. Move probe out of __init section and don't use platform_driver_probe which cannot be used with deferred probing. Since commit e9354576 ("gpiolib: Defer failed gpio requests by default") this driver might return -EPROBE_DEFER if a gpio_request fails. Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by:
-
Johan Hovold authored
commit 5c6d6fd1 upstream. Two drivers (atmel-pwm-bl and leds-atmel-pwm) currently depend on the atmel_pwm driver to have bound to any pwm-device before their devices are probed. Support deferred probing of such devices by making sure to return -EPROBE_DEFER from pwm_channel_alloc when no pwm-device has yet been bound. Signed-off-by:
-
Matti Gottlieb authored
commit b4992662 upstream. Add some new PCI IDs to the table for 7000 & 3160 series Signed-off-by:
Matti Gottlieb <matti.gottlieb@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Oren Givon authored
commit 93fc6411 upstream. Add new device IDs and configurations to support all the devices. Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
-
Peter Zijlstra authored
commit bf378d34 upstream. The PPC64 people noticed a missing memory barrier and crufty old comments in the perf ring buffer code. So update all the comments and add the missing barrier. When the architecture implements local_t using atomic_long_t there will be double barriers issued; but short of introducing more conditional barrier primitives this is the best we can do. Reported-by:
Victor Kaplansky <victork@il.ibm.com> Tested-by:
-
Steven Rostedt authored
commit 057db848 upstream. Andrey reported the following report: ERROR: AddressSanitizer: heap-buffer-overflow on address ffff8800359c99f3 ffff8800359c99f3 is located 0 bytes to the right of 243-byte region [ffff8800359c9900, ffff8800359c99f3) Accessed by thread T13003: #0 ffffffff810dd2da (asan_report_error+0x32a/0x440) #1 ffffffff810dc6b0 (asan_check_region+0x30/0x40) #2 ffffffff810dd4d3 (__tsan_write1+0x13/0x20) #3 ffffffff811cd19e (ftrace_regex_release+0x1be/0x260) #4 ffffffff812a1065 (__fput+0x155/0x360) #5 ffffffff812a12de (____fput+0x1e/0x30) #6 ffffffff8111708d (task_work_run+0x10d/0x140) #7 ffffffff810ea043 (do_exit+0x433/0x11f0) #8 ffffffff810eaee4 (do_group_exit+0x84/0x130) #9 ffffffff810eafb1 (SyS_exit_group+0x21/0x30) #10 ffffffff81928782 (system_call_fastpath+0x16/0x1b) Allocated by thread T5167: #0 ffffffff810dc778 (asan_slab_alloc+0x48/0xc0) #1 ffffffff8128337c (__kmalloc+0xbc/0x500) #2 ffffffff811d9d54 (trace_parser_get_init+0x34/0x90) #3 ffffffff811cd7b3 (ftrace_regex_open+0x83/0x2e0) #4 ffffffff811cda7d (ftrace_filter_open+0x2d/0x40) #5 ffffffff8129b4ff (do_dentry_open+0x32f/0x430) #6 ffffffff8129b668 (finish_open+0x68/0xa0) #7 ffffffff812b66ac (do_last+0xb8c/0x1710) #8 ffffffff812b7350 (path_openat+0x120/0xb50) #9 ffffffff812b8884 (do_filp_open+0x54/0xb0) #10 ffffffff8129d36c (do_sys_open+0x1ac/0x2c0) #11 ffffffff8129d4b7 (SyS_open+0x37/0x50) #12 ffffffff81928782 (system_call_fastpath+0x16/0x1b) Shadow bytes around the buggy address: ffff8800359c9700: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd ffff8800359c9780: fd fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa ffff8800359c9800: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9880: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>ffff8800359c9980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00[03]fb ffff8800359c9a00: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9a80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9b00: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 ffff8800359c9b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800359c9c00: 00 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap redzone: fa Heap kmalloc redzone: fb Freed heap region: fd Shadow gap: fe The out-of-bounds access happens on 'parser->buffer[parser->idx] = 0;' Although the crash happened in ftrace_regex_open() the real bug occurred in trace_get_user() where there's an incrementation to parser->idx without a check against the size. The way it is triggered is if userspace sends in 128 characters (EVENT_BUF_SIZE + 1), the loop that reads the last character stores it and then breaks out because there is no more characters. Then the last character is read to determine what to do next, and the index is incremented without checking size. Then the caller of trace_get_user() usually nulls out the last character with a zero, but since the index is equal to the size, it writes a nul character after the allocated space, which can corrupt memory. Luckily, only root user has write access to this file. Link: http://lkml.kernel.org/r/20131009222323.04fd1a0d@gandalf.local.homeReported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Anssi Hannula authored
commit 56cac413 upstream. hdmi_setup_fake_chmap() is supposed to set the reported channel map when the channel map is not specified by the user. However, the function indexes channel_allocations[] with a wrong value and extracts the wrong nibble from hdmi_channel_mapping[], causing wrong channel maps to be shown. Fix those issues. Tested on Intel HDMI to correctly generate various channel maps, for example 3,4,14,15,7,8,5,6 (instead of incorrect 3,4,8,7,5,6,14,0) for standard 7.1 channel audio. (Note that the side and rear channels are reported as RL/RR and RLC/RRC, respectively, as per the CEA-861 standard, instead of the more traditional SL/SR and RL/RR.) Note that this only fixes the layouts that only contain traditional 7.1 speakers (2.0, 2.1, 4.0, 5.1, 7.1, etc.). E.g. the rear center of 6.1 is still being shown wrongly due to an issue with from_cea_slot() which will be fixed in a later patch. Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Rui li authored
commit 0636fc50 upstream. Signed-off-by:
Rui li <li.rui27@zte.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Gerd Hoffmann authored
commit 7ad96847 upstream. This patch adds a pci stub driver to hyper-fb. The hyperv framebuffer driver will bind to the pci device then, so linux kernel and userspace know there is a proper kernel driver for the device active. lspci shows this for example: [root@dhcp231 ~]# lspci -vs8 00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller]) Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] Expansion ROM at <unassigned> [disabled] Kernel driver in use: hyperv_fb Another effect is that the xorg vesa driver will not attach to the device and thus the Xorg server will automatically use the fbdev driver instead. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Matthias Schiffer authored
commit 6c519bad upstream. batman-adv saves its table of packet handlers as a global state, so handlers must be set up only once (and setting them up a second time will fail). The recently-added network coding support tries to set up its handler each time a new softif is registered, which obviously fails when more that one softif is used (and in consequence, the softif creation fails). Fix this by splitting up batadv_nc_init into batadv_nc_init (which is called only once) and batadv_nc_mesh_init (which is called for each softif); in addition batadv_nc_free is renamed to batadv_nc_mesh_free to keep naming consistent. Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
David Vrabel authored
[ Upstream commit dc62ccac ] If a guest is destroyed without transitioning its frontend to CLOSED, the domain becomes a zombie as netback was not grant unmapping the shared rings. When removing a VIF, transition the backend to CLOSED so the VIF is disconnected if necessary (which will unmap the shared rings etc). This fixes a regression introduced by 279f438e (xen-netback: Don't destroy the netdev until the vif is shut down). Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Paul Durrant <Paul.Durrant@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Reviewed-by:
Paul Durrant <paul.durrant@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
