- 30 Nov, 2012 1 commit
-
-
Stefan Haberland authored
If a channel path is cabled incorrectly and the device is suspended and resumed the device may be inaccessible afterwards. Make the path connection check not interrupt the resume callback there could be other valid paths available. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Reference-ID: RQM 1262 Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
- 23 Nov, 2012 20 commits
-
-
Sebastian Ott authored
Allow drivers to enable/disable ccwgroup devices. Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Return -EINVAL if set_{on,off}line is called for already {on,off}line devices. Also return -EINVAL for drivers which do not provide a callback for set_{on,off}line. This behaviour is now consistent with the one for ccw devices. Reported-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Christian Borntraeger authored
I was chasing down a bug of random validity intercepts on s390. (guest prefix page not mapped in the host virtual aspace). Turns out that the problem was a wrong address space control element. The cause was quite complex: During paging activity a DAT protection during SIE caused a program interrupt. Normally, the sie retry loop tries to catch all interrupts during and shortly before sie to rerun the setup. The problem is now that protection causes a suppressing program interrupt, causing the PSW to point to the instruction AFTER SIE in case of DAT protection. This confused the logic of the retry loop to not trigger, instead we jumped directly back to SIE after return from the program interrupt. (the protection fault handler itself did a rewind of the psw). This usually works quite well, but: If now the protection fault handler has to wait, another program might be scheduled in. Later on the sie process will be schedules in again. In that case the content of CR1 (primary address space) will be wrong because switch_to will put the user space ASCE into CR1 and not the guest ASCE. In addition the program parameter is also wrong for every protection fault of a guest, since we dont issue the SPP instruction. So lets also check for PSW == instruction after SIE in the program check handler. Instead of expensively checking all program interruption codes that might be suppressing we assume that a program interrupt pointing after SIE was always a program interrupt in SIE. (Otherwise we have a kernel bug anyway). We also have to compensate the rewinding, since the C-level handlers will do that. Therefore we need to add a nop with the same length as SIE before the sie_loop. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: stable@vger.kernel.org CC: Heiko Carstens <heiko.carstens@de.ibm.com>
-
Martin Schwidefsky authored
The current single step code is racy in regard to concurrent delivery of signals. If a signal is delivered after a PER program check occurred but before the TIF_PER_TRAP bit has been checked in entry[64].S the code clears TIF_PER_TRAP and then calls do_signal. This is wrong, if the instruction completed (or has been suppressed) a SIGTRAP should be delivered to the debugger in any case. Only if the instruction has been nullified the SIGTRAP may not be send. The new logic always sets TIF_PER_TRAP if the program check indicates PER tracing but removes it again for all program checks that are nullifying. The effect is that for each change in the PSW address we now get a single SIGTRAP. Reported-by: Andreas Arnez <arnez@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
-
Heiko Carstens authored
Allow to generate code that only runs on zEC12 machines. Also add a check which prevents the kernel to run on machines which do not have any of the following new facilities installed: - (48) decimal-floating-point zoned-conversion - (49) execution-hint - (49) load-and-trap - (49) miscellaneous-instruction-extensions - (49) processor-assist - (50) constrained transactional-execution - (73) transactional-execution 48, 49, 50 and 73 are the bit numbers of the facility indications for each of the required facilities. Note that we assume that user-space gets compiled with the same compiler options, therefore we also test for a dfp facility even if the kernel doesn't make use of it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
-
Heiko Carstens authored
Mainly merge all different per-cpu arrays into a single array which holds all topology information per logical cpu. Also fix the broken core vs socket variable naming and simplify the locking a bit. When running in environments without topology information also invent book, socket and core ids, so that not all ids are zero. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Keep related functions together and move to appropriate file. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Move and rename init_storage_keys() to pageattr.c, so it can also be used from the sclp memory hotplug code in order to initialize storage keys. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Ingo Tuchscherer authored
The message request handling (type50 - clear key) for RSA operations (in CRT format) are now handled correctly with respect to the crb format container. Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Just convert fault_init() to an early initcall. That's still early enough since it only needs be called before user space processes get executed. No reason to externalize it. Also add the function to the init section and move the store_indication variable to the read_mostly section. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Let the dasd driver and qdio use ccw_device_get_schid and get rid of other similar functions. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Cornelia Huck authored
This will be needed by the new virtio-ccw transport. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Jan Glauber authored
Remove the BUG_ON's that check for failure or incomplete results of the s390 hardware crypto instructions. Rather report the errors as -EIO to the crypto layer. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Jan Glauber authored
Remove or replace BUG/BUG_ON where possible and convert WARN_ON to WARN_ON_ONCE if they can occur freqeuently as pointed out by: https://lkml.org/lkml/2012/9/27/461 Checks have been removed if: - the error condition leads to a hardware error which gets logged and in most cases stops the device - the error condition is a null pointer access - the error condition is just pointless or already handled at another location Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Do not use more than one KERN_<level> per printk. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Preinitialize the program check table, so we can put it into the read-only data section. Also use only four byte entries for the table, since each program check handler resides within the first 2GB. Therefore this reduces the size of the table by 50% on 64 bit builds. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Use 1MB frames for vmemmap if EDAT1 is available in order to reduce TLB pressure Always use a 1MB frame even if its only partially needed for struct pages. Otherwise we would end up with a mix of large frame and page mappings, because vmemmap_populate gets called for each section (256MB -> 3.5MB memmap) separately. Worst case is that we would waste 512KB. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Use 2GB frames for indentity mapping if EDAT2 is available to reduce TLB pressure. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: "This fixes recent regression where /dev/input/mice got assigned wrong device node which messed up setups with static /dev, and a regression in ads7846 GPIO debounce setup." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: ARM - OMAP: ads7846: fix pendown debounce setting Input: ads7846 - enable pendown GPIO debounce time setting Input: mousedev - move /dev/input/mice to the correct minor Input: MT - document new 'flags' argument of input_mt_init_slots()
-
- 22 Nov, 2012 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few more fixes for final 3.7. Two dealing with pinmux setup on OMAP, and one dealing with TV output on DaVinci. And one small MAINTAINER update." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: davinci: dm644x: fix out range signal for ED ARM: OMAP4: TWL: mux sys_drm_msecure as output for PMIC ARM: OMAP3: igep0020: Set WIFI/BT GPIO pins in correct mux mode ARM: OMAP: Add maintainer entry for IGEP machines
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6Linus Torvalds authored
Pull PARISC fixes from James Bottomley: "This is two bug fixes: one fixes a loophole where rt_sigprocmask() with the wrong values panics the box (Denial of Service) and the other fixes an aliasing problem with get_shared_area() which could cause data corruption. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] fix user-triggerable panic on parisc [PARISC] fix virtual aliasing issue in get_shared_area()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of four bug fixes. The isci one is an obvious thinko (using request buffer instead of response buffer) which causes a command to fail. The three others are DIF/DIX updates which are required because they're part of a series of ten patches, the other seven of which went into the block layer during the merge window meaning our current DIF/DIX implementation is broken without these three. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] sd: Implement support for WRITE SAME [SCSI] sd: Permit merged discard requests [SCSI] Add a report opcode helper [SCSI] isci: copy fis 0x34 response into proper buffer
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie. Small fixes for (mostly Nouveau, some radeon) regressions. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: use the correct fence implementation for nv50 drm/radeon: add new SI pci id radeon: add AGPMode 1 quirk for RV250 drm/radeon: properly track the crtc not_enabled case evergreen_mc_stop() drm/nouveau/bios: fix DCB v1.5 parsing drm/nouveau: add missing pll_calc calls drm/nouveau: fix crash with noaccel=1 drm/nv40: allocate ctxprog with kmalloc drm/nvc0/disp: fix thinko in vblank regression fix..
-
Al Viro authored
int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, compat_sigset_t __user *oset, unsigned int sigsetsize) { sigset_t old_set, new_set; int ret; if (set && get_sigset32(set, &new_set, sigsetsize)) ... static int get_sigset32(compat_sigset_t __user *up, sigset_t *set, size_t sz) { compat_sigset_t s; int r; if (sz != sizeof *set) panic("put_sigset32()"); In other words, rt_sigprocmask(69, (void *)69, 69) done by 32bit process will promptly panic the box. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Alex writes: A couple more small fixes for 3.7: - another evergreen_mc fix - add an AGP quirk for an old RV250 - new pci id. * 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add new SI pci id radeon: add AGPMode 1 quirk for RV250 drm/radeon: properly track the crtc not_enabled case evergreen_mc_stop()
-
Dave Airlie authored
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes nouveau: one more regression fix. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: use the correct fence implementation for nv50
-
Dave Airlie authored
Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Some more misc fallout from nouveau rework. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/bios: fix DCB v1.5 parsing drm/nouveau: add missing pll_calc calls drm/nouveau: fix crash with noaccel=1 drm/nv40: allocate ctxprog with kmalloc drm/nvc0/disp: fix thinko in vblank regression fix..
-
Maarten Lankhorst authored
Only compile time tested, noticed nv50_fence_create was never used, so fix this. This will probably fix vblank on nv50 cards. Hopefully this is still in time for 3.7 final release. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
- 21 Nov, 2012 10 commits
-
-
Alex Deucher authored
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Dave Hansen authored
There have been some 3.7-rc reports of vm issues, including some kswapd bugs and, more importantly, some memory "leaks": http://www.spinics.net/lists/linux-mm/msg46187.html https://bugzilla.kernel.org/show_bug.cgi?id=50181 Commit 1fb3f8ca ("mm: compaction: capture a suitable high-order page immediately when it is made available") took split_free_page() and reused it for the compaction code. It does something curious with capture_free_page() (previously known as split_free_page()): int capture_free_page(struct page *page, int alloc_order, ... __mod_zone_page_state(zone, NR_FREE_PAGES, -(1UL << order)); - /* Split into individual pages */ - set_page_refcounted(page); - split_page(page, order); + if (alloc_order != order) + expand(zone, page, alloc_order, order, + &zone->free_area[order], migratetype); Note that expand() puts the pages _back_ in the allocator, but it does not bump NR_FREE_PAGES. We "return" 'alloc_order' worth of pages, but we accounted for removing 'order' in the __mod_zone_page_state() call. For the old split_page()-style use (order==alloc_order) the bug will not trigger. But, when called from the compaction code where we occasionally get a larger page out of the buddy allocator than we need, we will run in to this. This patch simply changes the NR_FREE_PAGES manipulation to the correct 'alloc_order' instead of 'order'. I've been able to repeatedly trigger this in my testing environment. The amount "leaked" very closely tracks the imbalance I see in buddy pages vs. NR_FREE_PAGES. I have confirmed that this patch fixes the imbalance Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking updates from David Miller: 1) inet6_csk_update_pmtu() must return NULL or non-NULL, so translate ERR_PTR to NULL, as needed. Fix from Eric Dumazet. 2) Fix copy&paste error in IRDA sir_dev ->set_speed method invocation, it was testing the NULL'ness of a different method to guard the call. Fix from Alexander Shiyan. 3) Fix build regression of xilinx driver, from Jeff Mahoney. 4) Make XEN netfront (like XEN netback) handle compound pages in SKBs properly. From Ian Campbell. 5) Fix inverted logic of team_dev_queue_xmit() return value checks, from Jiri Pirko and Dan Carpenter. 6) dma_poll_create() no longer allows a NULL device argument, breaking both ixp4xx drivers. Fix from Xi Wang. 7) ne2000 driver doesn't hook up the parent device properly, breaking udev matching. Fix from Alan Cox. 8) Locking and memory leak fixes in Near Field Communications layer. From Thierry Escande, Szymon Janc, and Waldemar Rymarkiewicz. 9) sis900 resume regression, sis900_set_mode() is being called with the iomem pointer instead of the expected device private. Fix from Francois Romieu. 10) Fix IBSS regression caused by uninitializing the ibss-internals before performing an emptyness check, from Simon WUnderlich. 11) Fix SNIFFER mode regression in iwlwifi driver, from Johannes Berg. 12) Fix task wedges in mwifiex_cmd_timeout_func(), from Bing Zhao. 13) Add back wireless sysfs directory, too much stuff depends upon it being there (actually I'd say it never should have been removed to begin with). From Johannes Berg. 14) Fix hang introduced by suspend/resume changes in ath9k. Fix from Sujith Manoharan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits) team: bcast: convert return value of team_dev_queue_xmit() to bool correctly bonding: Bonding driver does not consider the gso_max_size/gso_max_segs setting of slave devices. xen/netfront: handle compound page fragments on transmit net: fix build failure in xilinx irda: sir_dev: Fix copy/paste typo ipv6: fix inet6_csk_update_pmtu() return value ixp4xx_hss: avoid calling dma_pool_create() with NULL dev ixp4xx_eth: avoid calling dma_pool_create() with NULL dev ne2000: add the right platform device of/net/mdio-gpio: Fix pdev->id issue when using devicetrees. NFC: Fix pn533 target mode memory leak NFC: pn533: Fix mem leak in pn533_in_dep_link_up NFC: pn533: Fix use after free NFC: pn533: Fix missing lock while operating on commands list NFC: Fix nfc_llcp_local chained list insertion ath9k_hw: Fix regression in device reset sis900: fix sis900_set_mode call parameters. iwlwifi: don't WARN when a non empty queue is disabled wireless: add back sysfs directory mwifiex: report error to MMC core if we cannot suspend ...
-
Olof Johansson authored
Merge tag 'omap-for-v3.7-rc5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few more regression fixes related to u-boot only muxing essential pins. * tag 'omap-for-v3.7-rc5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4: TWL: mux sys_drm_msecure as output for PMIC ARM: OMAP3: igep0020: Set WIFI/BT GPIO pins in correct mux mode ARM: OMAP: Add maintainer entry for IGEP machines
-
Igor Grinberg authored
Commit 97ee9f01 (ARM: OMAP: fix the ads7846 init code) have enabled the pendown GPIO debounce time setting by the below sequence: gpio_request_one() gpio_set_debounce() gpio_free() It also revealed a bug in the OMAP GPIO handling code which prevented the GPIO debounce clock to be disabled and CORE transition to low power states. Commit c9c55d92 (gpio/omap: fix off-mode bug: clear debounce settings on free/reset) fixes the OMAP GPIO handling code by making sure that the GPIO debounce clock gets disabled if no GPIO is requested from current bank. While fixing the OMAP GPIO handling code (in the right way), the above commit makes the gpio_request->set_debounce->free sequence invalid as after freeing the GPIO, the debounce settings are lost. Fix the debounce settings by moving the debounce initialization to the actual GPIO requesting code - the ads7846 driver. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Igor Grinberg authored
Some platforms need the pendown GPIO debounce time setting programmed. Since the pendown GPIO is handled by the driver, the debounce time should also be handled along with the pendown GPIO request. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jiri Pirko authored
The thing is that team_dev_queue_xmit() returns NET_XMIT_* or -E*. bc_trasmit() should return true in case all went well. So use ! to get correct retval from team_dev_queue_xmit() result. This bug caused iface statistics to be badly computed. This bug was introduced by: team: add broadcast mode (5fc88991) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Merge tag 'pinctrl-for-v3.7-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fix from Linus Walleij: "A simple pinctrl Kconfig oneliner arriving late. Final (hopefully) oneliner for the pinctrl subsystem targeted at v3.7" * tag 'pinctrl-for-v3.7-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl/samsung: don't allow enabling pinctrl-samsung standalone
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull selinux RCU fixlet from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: fix sel_netnode_insert() suspicious rcu dereference
-
Chun-Yi Lee authored
There have the following warning message when running modules install for sign ko files: # make modules_install ... INSTALL drivers/input/touchscreen/pcap_ts.ko Found = in conditional, should be == at scripts/sign-file line 164. Found = in conditional, should be == at scripts/sign-file line 161. Found = in conditional, should be == at scripts/sign-file line 159. This patch change replace '=' by '==' in elsif conditions for avoid the above warning messages. Signed-off-by: Chun-Yi Lee <jlee@suse.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-