- 30 Sep, 2019 1 commit
-
-
Shuah Khan authored
make TARGETS=bpf kselftest fails with: Makefile:127: tools/build/Makefile.include: No such file or directory When the bpf tool make is invoked from tools Makefile, srctree is cleared and the current logic check for srctree equals to empty string to determine srctree location from CURDIR. When the build in invoked from selftests/bpf Makefile, the srctree is set to "." and the same logic used for srctree equals to empty is needed to determine srctree. Check building_out_of_srctree undefined as the condition for both cases to fix "make TARGETS=bpf kselftest" build failure. Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20190927011344.4695-1-skhan@linuxfoundation.org
-
- 29 Sep, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Sanity check URB networking device parameters to avoid divide by zero, from Oliver Neukum. 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6 don't work properly. Longer term this needs a better fix tho. From Vijay Khemka. 3) Small fixes to selftests (use ping when ping6 is not present, etc.) from David Ahern. 4) Bring back rt_uses_gateway member of struct rtable, it's semantics were not well understood and trying to remove it broke things. From David Ahern. 5) Move usbnet snaity checking, ignore endpoints with invalid wMaxPacketSize. From Bjørn Mork. 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan. 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel, Alex Vesker, and Yevgeny Kliteynik 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron. 9) Fix crash when removing sch_cbs entry while offloading is enabled, from Vinicius Costa Gomes. 10) Signedness bug fixes, generally in looking at the result given by of_get_phy_mode() and friends. From Dan Crapenter. 11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet. 12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern. 13) Fix quantization code in tcp_bbr, from Kevin Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits) net: tap: clean up an indentation issue nfp: abm: fix memory leak in nfp_abm_u32_knode_replace tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state sk_buff: drop all skb extensions on free and skb scrubbing tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Documentation: Clarify trap's description mlxsw: spectrum: Clear VLAN filters during port initialization net: ena: clean up indentation issue NFC: st95hf: clean up indentation issue net: phy: micrel: add Asym Pause workaround for KSZ9021 net: socionext: ave: Avoid using netdev_err() before calling register_netdev() ptp: correctly disable flags on old ioctls lib: dimlib: fix help text typos net: dsa: microchip: Always set regmap stride to 1 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled net: sched: sch_sfb: don't call qdisc_put() while holding tree lock ...
-
- 28 Sep, 2019 11 commits
-
-
Linus Torvalds authored
Merge hugepage allocation updates from David Rientjes: "We (mostly Linus, Andrea, and myself) have been discussing offlist how to implement a sane default allocation strategy for hugepages on NUMA platforms. With these reverts in place, the page allocator will happily allocate a remote hugepage immediately rather than try to make a local hugepage available. This incurs a substantial performance degradation when memory compaction would have otherwise made a local hugepage available. This series reverts those reverts and attempts to propose a more sane default allocation strategy specifically for hugepages. Andrea acknowledges this is likely to fix the swap storms that he originally reported that resulted in the patches that removed __GFP_THISNODE from hugepage allocations. The immediate goal is to return 5.3 to the behavior the kernel has implemented over the past several years so that remote hugepages are not immediately allocated when local hugepages could have been made available because the increased access latency is untenable. The next goal is to introduce a sane default allocation strategy for hugepages allocations in general regardless of the configuration of the system so that we prevent thrashing of local memory when compaction is unlikely to succeed and can prefer remote hugepages over remote native pages when the local node is low on memory." Note on timing: this reverts the hugepage VM behavior changes that got introduced fairly late in the 5.3 cycle, and that fixed a huge performance regression for certain loads that had been around since 4.18. Andrea had this note: "The regression of 4.18 was that it was taking hours to start a VM where 3.10 was only taking a few seconds, I reported all the details on lkml when it was finally tracked down in August 2018. https://lore.kernel.org/linux-mm/20180820032640.9896-2-aarcange@redhat.com/ __GFP_THISNODE in MADV_HUGEPAGE made the above enterprise vfio workload degrade like in the "current upstream" above. And it still would have been that bad as above until 5.3-rc5" where the bad behavior ends up happening as you fill up a local node, and without that change, you'd get into the nasty swap storm behavior due to compaction working overtime to make room for more memory on the nodes. As a result 5.3 got the two performance fix reverts in rc5. However, David Rientjes then noted that those performance fixes in turn regressed performance for other loads - although not quite to the same degree. He suggested reverting the reverts and instead replacing them with two small changes to how hugepage allocations are done (patch descriptions rephrased by me): - "avoid expensive reclaim when compaction may not succeed": just admit that the allocation failed when you're trying to allocate a huge-page and compaction wasn't successful. - "allow hugepage fallback to remote nodes when madvised": when that node-local huge-page allocation failed, retry without forcing the local node. but by then I judged it too late to replace the fixes for a 5.3 release. So 5.3 was released with behavior that harked back to the pre-4.18 logic. But now we're in the merge window for 5.4, and we can see if this alternate model fixes not just the horrendous swap storm behavior, but also restores the performance regression that the late reverts caused. Fingers crossed. * emailed patches from David Rientjes <rientjes@google.com>: mm, page_alloc: allow hugepage fallback to remote nodes when madvised mm, page_alloc: avoid expensive reclaim when compaction may not succeed Revert "Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask"" Revert "Revert "mm, thp: restore node-local hugepage allocations"" -
David Rientjes authored
For systems configured to always try hard to allocate transparent hugepages (thp defrag setting of "always") or for memory that has been explicitly madvised to MADV_HUGEPAGE, it is often better to fallback to remote memory to allocate the hugepage if the local allocation fails first. The point is to allow the initial call to __alloc_pages_node() to attempt to defragment local memory to make a hugepage available, if possible, rather than immediately fallback to remote memory. Local hugepages will always have a better access latency than remote (huge)pages, so an attempt to make a hugepage available locally is always preferred. If memory compaction cannot be successful locally, however, it is likely better to fallback to remote memory. This could take on two forms: either allow immediate fallback to remote memory or do per-zone watermark checks. It would be possible to fallback only when per-zone watermarks fail for order-0 memory, since that would require local reclaim for all subsequent faults so remote huge allocation is likely better than thrashing the local zone for large workloads. In this case, it is assumed that because the system is configured to try hard to allocate hugepages or the vma is advised to explicitly want to try hard for hugepages that remote allocation is better when local allocation and memory compaction have both failed. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Rientjes authored
Memory compaction has a couple significant drawbacks as the allocation order increases, specifically: - isolate_freepages() is responsible for finding free pages to use as migration targets and is implemented as a linear scan of memory starting at the end of a zone, - failing order-0 watermark checks in memory compaction does not account for how far below the watermarks the zone actually is: to enable migration, there must be *some* free memory available. Per the above, watermarks are not always suffficient if isolate_freepages() cannot find the free memory but it could require hundreds of MBs of reclaim to even reach this threshold (read: potentially very expensive reclaim with no indication compaction can be successful), and - if compaction at this order has failed recently so that it does not even run as a result of deferred compaction, looping through reclaim can often be pointless. For hugepage allocations, these are quite substantial drawbacks because these are very high order allocations (order-9 on x86) and falling back to doing reclaim can potentially be *very* expensive without any indication that compaction would even be successful. Reclaim itself is unlikely to free entire pageblocks and certainly no reliance should be put on it to do so in isolation (recall lumpy reclaim). This means we should avoid reclaim and simply fail hugepage allocation if compaction is deferred. It is also not helpful to thrash a zone by doing excessive reclaim if compaction may not be able to access that memory. If order-0 watermarks fail and the allocation order is sufficiently large, it is likely better to fail the allocation rather than thrashing the zone. Signed-off-by:
-
David Rientjes authored
This reverts commit 92717d42. Since commit a8282608 ("Revert "mm, thp: restore node-local hugepage allocations"") is reverted in this series, it is better to restore the previous 5.2 behavior between the thp allocation and the page allocator rather than to attempt any consolidation or cleanup for a policy that is now reverted. It's less risky during an rc cycle and subsequent patches in this series further modify the same policy that the pre-5.3 behavior implements. Consolidation and cleanup can be done subsequent to a sane default page allocation strategy, so this patch reverts a cleanup done on a strategy that is now reverted and thus is the least risky option. Signed-off-by:
-
David Rientjes authored
This reverts commit a8282608. The commit references the original intended semantic for MADV_HUGEPAGE which has subsequently taken on three unique purposes: - enables or disables thp for a range of memory depending on the system's config (is thp "enabled" set to "always" or "madvise"), - determines the synchronous compaction behavior for thp allocations at fault (is thp "defrag" set to "always", "defer+madvise", or "madvise"), and - reverts a previous MADV_NOHUGEPAGE (there is no madvise mode to only clear previous hugepage advice). These are the three purposes that currently exist in 5.2 and over the past several years that userspace has been written around. Adding a NUMA locality preference adds a fourth dimension to an already conflated advice mode. Based on the semantic that MADV_HUGEPAGE has provided over the past several years, there exist workloads that use the tunable based on these principles: specifically that the allocation should attempt to defragment a local node before falling back. It is agreed that remote hugepages typically (but not always) have a better access latency than remote native pages, although on Naples this is at parity for intersocket. The revert commit that this patch reverts allows hugepage allocation to immediately allocate remotely when local memory is fragmented. This is contrary to the semantic of MADV_HUGEPAGE over the past several years: that is, memory compaction should be attempted locally before falling back. The performance degradation of remote hugepages over local hugepages on Rome, for example, is 53.5% increased access latency. For this reason, the goal is to revert back to the 5.2 and previous behavior that would attempt local defragmentation before falling back. With the patch that is reverted by this patch, we see performance degradations at the tail because the allocator happily allocates the remote hugepage rather than even attempting to make a local hugepage available. zone_reclaim_mode is not a solution to this problem since it does not only impact hugepage allocations but rather changes the memory allocation strategy for *all* page allocations. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "An assortment of fixes that were either missed by me, or didn't arrive quite in time for the first v5.4 pull. - Most notable is a fix for an issue with tlbie (broadcast TLB invalidation) on Power9, when using the Radix MMU. The tlbie can race with an mtpid (move to PID register, essentially MMU context switch) on another thread of the core, which can cause stores to continue to go to a page after it's unmapped. - A fix in our KVM code to add a missing barrier, the lack of which has been observed to cause missed IPIs and subsequently stuck CPUs in the host. - A change to the way we initialise PCR (Processor Compatibility Register) to make it forward compatible with future CPUs. - On some older PowerVM systems our H_BLOCK_REMOVE support could oops, fix it to detect such systems and fallback to the old invalidation method. - A fix for an oops seen on some machines when using KASAN on 32-bit. - A handful of other minor fixes, and two new selftests. Thanks to: Alistair Popple, Aneesh Kumar K.V, Christophe Leroy, Gustavo Romero, Joel Stanley, Jordan Niethe, Laurent Dufour, Michael Roth, Oliver O'Halloran" * tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/eeh: Fix eeh eeh_debugfs_break_device() with SRIOV devices powerpc/nvdimm: use H_SCM_QUERY hcall on H_OVERLAP error powerpc/nvdimm: Use HCALL error as the return value selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9 powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions powerpc/pseries: Call H_BLOCK_REMOVE when supported powerpc/pseries: Read TLB Block Invalidate Characteristics KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flag powerpc/mm: Fix an Oops in kasan_mmu_init() powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY powerpc/64s: Set reserved PCR bits powerpc: Fix definition of PCR bits to work with old binutils powerpc/book3s64/radix: Remove WARN_ON in destroy_context() powerpc/tm: Add tm-poison test -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "A kexec fix for the case when GCC_PLUGIN_STACKLEAK=y is enabled" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/purgatory: Disable the stackleak GCC plugin for the purgatory
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: - Apply a number of membarrier related fixes and cleanups, which fixes a use-after-free race in the membarrier code - Introduce proper RCU protection for tasks on the runqueue - to get rid of the subtle task_rcu_dereference() interface that was easy to get wrong - Misc fixes, but also an EAS speedup * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Avoid redundant EAS calculation sched/core: Remove double update_max_interval() call on CPU startup sched/core: Fix preempt_schedule() interrupt return comment sched/fair: Fix -Wunused-but-set-variable warnings sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr() sched/membarrier: Return -ENOMEM to userspace on memory allocation failure sched/membarrier: Skip IPIs when mm->mm_users == 1 selftests, sched/membarrier: Add multi-threaded test sched/membarrier: Fix p->mm->membarrier_state racy load sched/membarrier: Call sync_core only before usermode for same mm sched/membarrier: Remove redundant check sched/membarrier: Fix private expedited registration check tasks, sched/core: RCUify the assignment of rq->curr tasks, sched/core: With a grace period after finish_task_switch(), remove unnecessary code tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue tasks: Add a count of task RCU users sched/core: Convert vcpu_is_preempted() from macro to an inline function sched/fair: Remove unused cfs_rq_clock_task() function
-
Linus Torvalds authored
Merge branch 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
-
Linus Torvalds authored
Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "The major feature in this time is IMA support for measuring and appraising appended file signatures. In addition are a couple of bug fixes and code cleanup to use struct_size(). In addition to the PE/COFF and IMA xattr signatures, the kexec kernel image may be signed with an appended signature, using the same scripts/sign-file tool that is used to sign kernel modules. Similarly, the initramfs may contain an appended signature. This contained a lot of refactoring of the existing appended signature verification code, so that IMA could retain the existing framework of calculating the file hash once, storing it in the IMA measurement list and extending the TPM, verifying the file's integrity based on a file hash or signature (eg. xattrs), and adding an audit record containing the file hash, all based on policy. (The IMA support for appended signatures patch set was posted and reviewed 11 times.) The support for appended signature paves the way for adding other signature verification methods, such as fs-verity, based on a single system-wide policy. The file hash used for verifying the signature and the signature, itself, can be included in the IMA measurement list" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: ima_api: Use struct_size() in kzalloc() ima: use struct_size() in kzalloc() sefltest/ima: support appended signatures (modsig) ima: Fix use after free in ima_read_modsig() MODSIGN: make new include file self contained ima: fix freeing ongoing ahash_request ima: always return negative code for error ima: Store the measurement again when appraising a modsig ima: Define ima-modsig template ima: Collect modsig ima: Implement support for module-style appended signatures ima: Factor xattr_verify() out of ima_appraise_measurement() ima: Add modsig appraise_type option for module-style appended signatures integrity: Select CONFIG_KEYS instead of depending on it PKCS#7: Introduce pkcs7_get_digest() PKCS#7: Refactor verify_pkcs7_signature() MODSIGN: Export module signature definitions ima: initialize the "template" field with the default template
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd updates from Bruce Fields: "Highlights: - Add a new knfsd file cache, so that we don't have to open and close on each (NFSv2/v3) READ or WRITE. This can speed up read and write in some cases. It also replaces our readahead cache. - Prevent silent data loss on write errors, by treating write errors like server reboots for the purposes of write caching, thus forcing clients to resend their writes. - Tweak the code that allocates sessions to be more forgiving, so that NFSv4.1 mounts are less likely to hang when a server already has a lot of clients. - Eliminate an arbitrary limit on NFSv4 ACL sizes; they should now be limited only by the backend filesystem and the maximum RPC size. - Allow the server to enforce use of the correct kerberos credentials when a client reclaims state after a reboot. And some miscellaneous smaller bugfixes and cleanup" * tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linux: (34 commits) sunrpc: clean up indentation issue nfsd: fix nfs read eof detection nfsd: Make nfsd_reset_boot_verifier_locked static nfsd: degraded slot-count more gracefully as allocation nears exhaustion. nfsd: handle drc over-allocation gracefully. nfsd: add support for upcall version 2 nfsd: add a "GetVersion" upcall for nfsdcld nfsd: Reset the boot verifier on all write I/O errors nfsd: Don't garbage collect files that might contain write errors nfsd: Support the server resetting the boot verifier nfsd: nfsd_file cache entries should be per net namespace nfsd: eliminate an unnecessary acl size limit Deprecate nfsd fault injection nfsd: remove duplicated include from filecache.c nfsd: Fix the documentation for svcxdr_tmpalloc() nfsd: Fix up some unused variable warnings nfsd: close cached files prior to a REMOVE or RENAME that would replace target nfsd: rip out the raparms cache nfsd: have nfsd_test_lock use the nfsd_file cache nfsd: hook up nfs4_preprocess_stateid_op to the nfsd_file cache ...
-
- 27 Sep, 2019 27 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse virtio-fs support from Miklos Szeredi: "Virtio-fs allows exporting directory trees on the host and mounting them in guest(s). This isn't actually a new filesystem, but a glue layer between the fuse filesystem and a virtio based back-end. It's similar in functionality to the existing virtio-9p solution, but significantly faster in benchmarks and has better POSIX compliance. Further permformance improvements can be achieved by sharing the page cache between host and guest, allowing for faster I/O and reduced memory use. Kata Containers have been including the out-of-tree virtio-fs (with the shared page cache patches as well) since version 1.7 as an experimental feature. They have been active in development and plan to switch from virtio-9p to virtio-fs as their default solution. There has been interest from other sources as well. The userspace infrastructure is slated to be merged into qemu once the kernel part hits mainline. This was developed by Vivek Goyal, Dave Gilbert and Stefan Hajnoczi" * tag 'virtio-fs-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: virtio-fs: add virtiofs filesystem virtio-fs: add Documentation/filesystems/virtiofs.rst fuse: reserve values for mapping protocol
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: "Some of the usual small fixes and cleanup. Small fixes all around: - avoid overlayfs copy-up for PRIVATE mmaps - KUMSAN uninitialized warning for transport error - one syzbot memory leak fix in 9p cache - internal API cleanup for v9fs_fill_super" * tag '9p-for-5.4' of git://github.com/martinetd/linux: 9p/vfs_super.c: Remove unused parameter data in v9fs_fill_super 9p/cache.c: Fix memory leak in v9fs_cache_session_get_cookie 9p: Transport error uninitialized 9p: avoid attaching writeback_fid on mmap with type PRIVATE
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull more RISC-V updates from Paul Walmsley: "Some additional RISC-V updates. This includes one significant fix: - Prevent interrupts from being unconditionally re-enabled during exception handling if they were disabled in the context in which the exception occurred Also a few other fixes: - Fix a build error when sparse memory support is manually enabled - Prevent CPUs beyond CONFIG_NR_CPUS from being enabled in early boot And a few minor improvements: - DT improvements: in the FU540 SoC DT files, improve U-Boot compatibility by adding an "ethernet0" alias, drop an unnecessary property from the DT files, and add support for the PWM device - KVM preparation: add a KVM-related macro for future RISC-V KVM support, and export some symbols required to build KVM support as modules - defconfig additions: build more drivers by default for QEMU configurations" * tag 'riscv/for-v5.4-rc1-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Avoid interrupts being erroneously enabled in handle_exception() riscv: dts: sifive: Drop "clock-frequency" property of cpu nodes riscv: dts: sifive: Add ethernet0 to the aliases node RISC-V: Export kernel symbols for kvm KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface arch/riscv: disable excess harts before picking main boot hart RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig RISC-V: Fix building error when CONFIG_SPARSEMEM_MANUAL=y riscv: dts: Add DT support for SiFive FU540 PWM driver -
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 fix from Ley Foon Tan: "Make sure the command line buffer is NUL-terminated" * tag 'nios2-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: force the string buffer NULL-terminated
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more KVM updates from Paolo Bonzini: "x86 KVM changes: - The usual accuracy improvements for nested virtualization - The usual round of code cleanups from Sean - Added back optimizations that were prematurely removed in 5.2 (the bare minimum needed to fix the regression was in 5.3-rc8, here comes the rest) - Support for UMWAIT/UMONITOR/TPAUSE - Direct L2->L0 TLB flushing when L0 is Hyper-V and L1 is KVM - Tell Windows guests if SMT is disabled on the host - More accurate detection of vmexit cost - Revert a pvqspinlock pessimization" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (56 commits) KVM: nVMX: cleanup and fix host 64-bit mode checks KVM: vmx: fix build warnings in hv_enable_direct_tlbflush() on i386 KVM: x86: Don't check kvm_rebooting in __kvm_handle_fault_on_reboot() KVM: x86: Drop ____kvm_handle_fault_on_reboot() KVM: VMX: Add error handling to VMREAD helper KVM: VMX: Optimize VMX instruction error and fault handling KVM: x86: Check kvm_rebooting in kvm_spurious_fault() KVM: selftests: fix ucall on x86 Revert "locking/pvqspinlock: Don't wait if vCPU is preempted" kvm: nvmx: limit atomic switch MSRs kvm: svm: Intercept RDPRU kvm: x86: Add "significant index" flag to a few CPUID leaves KVM: x86/mmu: Skip invalid pages during zapping iff root_count is zero KVM: x86/mmu: Explicitly track only a single invalid mmu generation KVM: x86/mmu: Revert "KVM: x86/mmu: Remove is_obsolete() call" KVM: x86/mmu: Revert "Revert "KVM: MMU: reclaim the zapped-obsolete page first"" KVM: x86/mmu: Revert "Revert "KVM: MMU: collapse TLB flushes when zap all pages"" KVM: x86/mmu: Revert "Revert "KVM: MMU: zap pages in batch"" KVM: x86/mmu: Revert "Revert "KVM: MMU: add tracepoint for kvm_mmu_invalidate_all_pages"" KVM: x86/mmu: Revert "Revert "KVM: MMU: show mmu_valid_gen in shadow page related tracepoints"" ... -
Linus Torvalds authored
Merge tag 'pwm/for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Besides one new driver being added for the PWM controller found in various Spreadtrum SoCs, this series of changes brings a slew of, mostly minor, fixes and cleanups for existing drivers, as well as some enhancements to the core code. Lastly, Uwe is added to the PWM subsystem entry of the MAINTAINERS file, making official his role as a reviewer" * tag 'pwm/for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (34 commits) MAINTAINERS: Add myself as reviewer for the PWM subsystem MAINTAINERS: Add patchwork link for PWM entry MAINTAINERS: Add a selection of PWM related keywords to the PWM entry pwm: mediatek: Add MT7629 compatible string dt-bindings: pwm: Update bindings for MT7629 SoC pwm: mediatek: Update license and switch to SPDX tag pwm: mediatek: Use pwm_mediatek as common prefix pwm: mediatek: Allocate the clks array dynamically pwm: mediatek: Remove the has_clks field pwm: mediatek: Drop the check for of_device_get_match_data() pwm: atmel: Consolidate driver data initialization pwm: atmel: Remove unneeded check for match data pwm: atmel: Remove platform_device_id and use only dt bindings pwm: stm32-lp: Add check in case requested period cannot be achieved pwm: Ensure pwm_apply_state() doesn't modify the state argument pwm: fsl-ftm: Don't update the state for the caller of pwm_apply_state() pwm: sun4i: Don't update the state for the caller of pwm_apply_state() pwm: rockchip: Don't update the state for the caller of pwm_apply_state() pwm: Let pwm_get_state() return the last implemented state pwm: Introduce local struct pwm_chip in pwm_apply_state() ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more io_uring updates from Jens Axboe: "Just two things in here: - Improvement to the io_uring CQ ring wakeup for batched IO (me) - Fix wrong comparison in poll handling (yangerkun) I realize the first one is a little late in the game, but it felt pointless to hold it off until the next release. Went through various testing and reviews with Pavel and peterz" * tag 'for-5.4/io_uring-2019-09-27' of git://git.kernel.dk/linux-block: io_uring: make CQ ring wakeups be more efficient io_uring: compare cached_cq_tail with cq.head in_io_uring_poll
-
Colin Ian King authored
There is a statement that is indented too deeply, remove the extraneous tab. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes/changes to round off this merge window. This contains: - Small series making some functional tweaks to blk-iocost (Tejun) - Elevator switch locking fix (Ming) - Kill redundant call in blk-wbt (Yufen) - Fix flush timeout handling (Yufen)" * tag 'for-linus-2019-09-27' of git://git.kernel.dk/linux-block: block: fix null pointer dereference in blk_mq_rq_timed_out() rq-qos: get rid of redundant wbt_update_limits() iocost: bump up default latency targets for hard disks iocost: improve nr_lagging handling iocost: better trace vrate changes block: don't release queue's sysfs lock during switching elevator blk-mq: move lockdep_assert_held() into elevator_exit
-
Navid Emamdoost authored
In nfp_abm_u32_knode_replace if the allocation for match fails it should go to the error handling instead of returning. Updated other gotos to have correct errno returned, too. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Yuchung Cheng and Marek Majkowski independently reported a weird behavior of TCP_USER_TIMEOUT option when used at connect() time. When the TCP_USER_TIMEOUT is reached, tcp_write_timeout() believes the flow should live, and the following condition in tcp_clamp_rto_to_user_timeout() programs one jiffie timers : remaining = icsk->icsk_user_timeout - elapsed; if (remaining <= 0) return 1; /* user timeout has passed; fire ASAP */ This silly situation ends when the max syn rtx count is reached. This patch makes sure we honor both TCP_SYNCNT and TCP_USER_TIMEOUT, avoiding these spurious SYN packets. Fixes: b701a99e ("tcp: Add tcp_clamp_rto_to_user_timeout() helper to improve accuracy") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
Yuchung Cheng <ycheng@google.com> Reported-by:
Marek Majkowski <marek@cloudflare.com> Cc: Jon Maxwell <jmaxwell37@gmail.com> Link: https://marc.info/?l=linux-netdev&m=156940118307949&w=2Acked-by:
Jon Maxwell <jmaxwell37@gmail.com> Tested-by:
-
Florian Westphal authored
Now that we have a 3rd extension, add a new helper that drops the extension space and use it when we need to scrub an sk_buff. At this time, scrubbing clears secpath and bridge netfilter data, but retains the tc skb extension, after this patch all three get cleared. NAPI reuse/free assumes we can only have a secpath attached to skb, but it seems better to clear all extensions there as well. v2: add unlikely hint (Eric Dumazet) Fixes: 95a7233c ("net: openvswitch: Set OvS recirc_id from tc chain index") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Kevin(Yudong) Yang authored
There was a bug in the previous logic that attempted to ensure gain cycling gets inflight above BDP even for small BDPs. This code correctly raised and lowered target inflight values during the gain cycle. And this code correctly ensured that cwnd was raised when probing bandwidth. However, it did not correspondingly ensure that cwnd was *not* raised in this way when *not* probing for bandwidth. The result was that small-BDP flows that were always cwnd-bound could go for many cycles with a fixed cwnd, and not probe or yield bandwidth at all. This meant that multiple small-BDP flows could fail to converge in their bandwidth allocations. Fixes: 3c346b233c68 ("tcp_bbr: fix bw probing to raise in-flight data for very small BDPs") Signed-off-by:Kevin(Yudong) Yang <yyd@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Priyaranjan Jha <priyarjha@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management updates from Zhang Rui: - Add Amit Kucheria as thermal subsystem Reviewer (Amit Kucheria) - Fix a use after free bug when unregistering thermal zone devices (Ido Schimmel) - Fix thermal core framework to use put_device() when device_register() fails (Yue Hu) - Enable intel_pch_thermal and MMIO RAPL support for Intel Icelake platform (Srinivas Pandruvada) - Add clock operations in qorip thermal driver, for some platforms with clock control like i.MX8MQ (Anson Huang) - A couple of trivial fixes and cleanups for thermal core and different soc thermal drivers (Amit Kucheria, Christophe JAILLET, Chuhong Yuan, Fuqian Huang, Kelsey Skunberg, Nathan Huckleberry, Rishi Gupta, Srinivas Kandagatla) * 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: MAINTAINERS: Add Amit Kucheria as reviewer for thermal thermal: Add some error messages thermal: Fix use-after-free when unregistering thermal zone device thermal/drivers/core: Use put_device() if device_register() fails thermal_hwmon: Sanitize thermal_zone type thermal: intel: Use dev_get_drvdata thermal: intel: int3403: replace printk(KERN_WARN...) with pr_warn(...) thermal: intel: int340x_thermal: Remove unnecessary acpi_has_method() uses thermal: int340x: processor_thermal: Add Ice Lake support drivers: thermal: qcom: tsens: Fix memory leak from qfprom read thermal: tegra: Fix a typo thermal: rcar_gen3_thermal: Replace devm_add_action() followed by failure action with devm_add_action_or_reset() thermal: armada: Fix -Wshift-negative-value dt-bindings: thermal: qoriq: Add optional clocks property thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap() thermal: qoriq: Fix error path of calling qoriq_tmu_register_tmu_zone fail thermal: qoriq: Add clock operations drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Various fixes This patchset includes two small fixes for the mlxsw driver and one patch which clarifies recently introduced devlink-trap documentation. Patch #1 clears the port's VLAN filters during port initialization. This ensures that the drop reason reported to the user is consistent. The problem is explained in detail in the commit message. Patch #2 clarifies the description of one of the traps exposed via devlink-trap. Patch #3 from Danielle forbids the installation of a tc filter with multiple mirror actions since this is not supported by the device. The failure is communicated to the user via extack. ==================== Signed-off-by: -
Danielle Ratson authored
The ASIC can only mirror a packet to one port, but when user is trying to set more than one mirror action, it doesn't fail. Add a check if more than one mirror action was specified per rule and if so, fail for not being supported. Fixes: d0d13c18 ("mlxsw: spectrum_acl: Add support for mirror action") Signed-off-by:
Danielle Ratson <danieller@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Alex noted that the below description might not be obvious to all users. Clarify it by adding an example. Fixes: f3047ca0 ("Documentation: Add devlink-trap documentation") Reported-by:
Alex Kushnarov <alexanderk@mellanox.com> Reviewed-by:
-
Ido Schimmel authored
When a port is created, its VLAN filters are not cleared by the firmware. This causes tagged packets to be later dropped by the ingress STP filters, which default to DISCARD state. The above did not matter much until commit b5ce611f ("mlxsw: spectrum: Add devlink-trap support") where we exposed the drop reason to users. Without this patch, the drop reason users will see is not consistent. If a port is enslaved to a VLAN-aware bridge and a packet with an invalid VLAN tries to ingress the bridge, it will be dropped due to ingress STP filter. If the VLAN is later enabled and then disabled, the packet will be dropped by the ingress VLAN filter despite the above being a seemingly NOP operation. Fix this by clearing all the VLAN filters during port initialization. Adjust the test accordingly. Fixes: b5ce611f ("mlxsw: spectrum: Add devlink-trap support") Reported-by:
-
Colin Ian King authored
There memset is indented incorrectly, remove the extraneous tabs. Signed-off-by:
-
Colin Ian King authored
The return statement is indented incorrectly, add in a missing tab and remove an extraneous space after the return Signed-off-by:
-
Hans Andersson authored
The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric Pause capability is set. This issue is described in a Silicon Errata (DS80000691D or DS80000692D), which advises to always disable the capability. Micrel KSZ9021 has no errata, but has the same issue with Asymmetric Pause. This patch apply the same workaround as the one for KSZ9031. Fixes: 3aed3e2a ("net: phy: micrel: add Asym Pause workaround") Signed-off-by:
Hans Andersson <hans.andersson@cellavision.se> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Kunihiko Hayashi authored
Until calling register_netdev(), ndev->dev_name isn't specified, and netdev_err() displays "(unnamed net_device)". ave 65000000.ethernet (unnamed net_device) (uninitialized): invalid phy-mode setting ave: probe of 65000000.ethernet failed with error -22 This replaces netdev_err() with dev_err() before calling register_netdev(). Signed-off-by:Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by:
-
Jacob Keller authored
Commit 41560658 ("PTP: introduce new versions of IOCTLs", 2019-09-13) introduced new versions of the PTP ioctls which actually validate that the flags are acceptable values. As part of this, it cleared the flags value using a bitwise and+negation, in an attempt to prevent the old ioctl from accidentally enabling new features. This is incorrect for a couple of reasons. First, it results in accidentally preventing previously working flags on the request ioctl. By clearing the "valid" flags, we now no longer allow setting the enable, rising edge, or falling edge flags. Second, if we add new additional flags in the future, they must not be set by the old ioctl. (Since the flag wasn't checked before, we could potentially break userspace programs which sent garbage flag data. The correct way to resolve this is to check for and clear all but the originally valid flags. Create defines indicating which flags are correctly checked and interpreted by the original ioctls. Use these to clear any bits which will not be correctly interpreted by the original ioctls. In the future, new flags must be added to the VALID_FLAGS macros, but *not* to the V1_VALID_FLAGS macros. In this way, new features may be exposed over the v2 ioctls, but without breaking previous userspace which happened to not clear the flags value properly. The old ioctl will continue to behave the same way, while the new ioctl gains the benefit of using the flags fields. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Christopher Hall <christopher.s.hall@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Fix help text typos for DIMLIB. Fixes: 4f75da36 ("linux/dim: Move implementation to .c files") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Tal Gilboa <talgi@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Acked-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by:
-
Marek Vasut authored
The regmap stride is set to 1 for regmap describing 8bit registers already. However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This is not correct, as the switch protocol supports unaligned register reads and writes and the KSZ87xx even uses such unaligned register accesses to read e.g. MIB counter. This patch fixes MIB counter access on KSZ87xx. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: Woojung Huh <woojung.huh@microchip.com> Fixes: 46558d60 ("net: dsa: microchip: Initial SPI regmap support") Fixes: 255b59ad ("net: dsa: microchip: Factor out regmap config generation into common header") Reviewed-by:
George McCollister <george.mccollister@gmail.com> Tested-by:
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - addition of AST2600, i.MX7ULP and F81803 watchdog support - removal of the w90x900 and ks8695 drivers - ziirave_wdt improvements - small fixes and improvements * tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (51 commits) watchdog: f71808e_wdt: Add F81803 support watchdog: qcom: remove unnecessary variable from private storage watchdog: qcom: support pre-timeout when the bark irq is available watchdog: imx_sc: this patch just fixes whitespaces watchdog: apseed: Add access_cs0 option for alt-boot watchdog: aspeed: add support for dual boot watchdog: orion_wdt: use timer1 as a pretimeout watchdog: Add i.MX7ULP watchdog support dt-bindings: watchdog: Add i.MX7ULP bindings dt-bindings: watchdog: sun4i: Add the watchdog clock dt-bindings: watchdog: sun4i: Add the watchdog interrupts dt-bindings: watchdog: Convert Allwinner watchdog to a schema dt-bindings: watchdog: Add YAML schemas for the generic watchdog bindings watchdog: aspeed: Add support for AST2600 dt-bindings: watchdog: Add ast2600 compatible watchdog: ziirave_wdt: Update checked I2C functionality mask watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data() watchdog: ziirave_wdt: Fix DOWNLOAD_START payload watchdog: ziirave_wdt: Drop status polling code watchdog: ziirave_wdt: Fix RESET_PROCESSOR payload ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Add NFT_CHAIN_POLICY_UNSET to replace hardcoded -1 to specify that the chain policy is unset. The chain policy field is actually defined as an 8-bit unsigned integer. 2) Remove always true condition reported by smatch in chain policy check. 3) Fix element lookup on dynamic sets, from Florian Westphal. 4) Use __u8 in ebtables uapi header, from Masahiro Yamada. 5) Bogus EBUSY when removing flowtable after chain flush, from Laura Garcia Liebana. ==================== Signed-off-by:
-
