- 02 May, 2022 3 commits
-
-
Christoph Hellwig authored
nvme-fc appid support needs CONFIG_BLK_CGROUP_FC_APPID to work, so disable the whole code if the option is not set. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20220420042723.1010598-3-hch@lst.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Remove the unused and deprecated __bio_blkcg helper. Signed-off-by:
-
Ming Lei authored
So far bio is marked as REQ_POLLED if RWF_HIPRI/IOCB_HIPRI is passed from userspace sync io interface, then block layer tries to poll until the bio is completed. But the current implementation calls blk_io_schedule() if bio_poll() returns 0, and this way causes io hang or timeout easily. But looks no one reports this kind of issue, which should have been triggered in normal io poll sanity test or blktests block/007 as observed by Changhui, that means it is very likely that no one uses it or no one cares it. Also after io_uring is invented, io poll for sync dio becomes legacy interface. So ignore RWF_HIPRI hint for sync dio. CC: linux-mm@kvack.org Cc: linux-xfs@vger.kernel.org Reported-by:
Changhui Zhong <czhong@redhat.com> Suggested-by:
Ming Lei <ming.lei@redhat.com> Tested-by:
-
- 23 Apr, 2022 5 commits
-
-
Michal Orzel authored
Get rid of the following redundant assignments: - to a variable r_cols from function ldm_parse_cmp3 - to variables r_id1 and r_id2 from functions ldm_parse_dgr3 and ldm_parse_dgr4 - to a variable r_index from function ldm_parse_prt3 that end up in values not being read until the end of function. Reported by clang-tidy [deadcode.DeadStores] Signed-off-by:
Michal Orzel <michalorzel.eng@gmail.com> Link: https://lore.kernel.org/r/20220423113811.13335-5-michalorzel.eng@gmail.comSigned-off-by:
-
Michal Orzel authored
Get rid of redundant assignment to a variable part_fmt from function atari_partition. It is being assigned a value that is never read until the end of function. Reported by clang-tidy [deadcode.DeadStores] Signed-off-by:
-
Michal Orzel authored
Get rid of redundant assignments to a variable slot from function adfspart_check_ADFS. It is being assigned a value that is never read as we are breaking out from the switch case and the function ends. Reported by clang-tidy [deadcode.DeadStores] Signed-off-by:
-
Michal Orzel authored
Get rid of redundant assignment to a variable ret from function bio_map_user_iov as it is being assigned a value that is never read. It is being re-assigned in the first instruction after the while loop Reported by clang-tidy [deadcode.DeadStores] Signed-off-by:
-
Michal Orzel authored
Get rid of redundant assignments to a variable sectors from functions badblocks_check and badblocks_clear. This variable, that is a function parameter, is being assigned a value that is never read until the end of function. Reported by clang-tidy [deadcode.DeadStores] Signed-off-by:
-
- 18 Apr, 2022 32 commits
-
-
Ming Lei authored
Export IO accounting interfaces in terms of block_device now that gendisk has become more internal to block core. Rename __part_{start,end}_io_acct's first argument from part to bdev. Rename __part_{start,end}_io_acct to bdev_{start,end}_io_acct and export them. Remove disk_{start,end}_io_acct and update caller (zram) to use bdev_{start,end}_io_acct. DM can now be updated to use bdev_{start,end}_io_acct. Signed-off-by:Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20220418022733.56168-2-snitzer@kernel.orgSigned-off-by:
-
Christoph Hellwig authored
Randomly poking into block device internals for manual prefetches isn't exactly a very maintainable thing to do. And none of the performance critical direct I/O implementations still use this library function anyway, so just drop it. Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20220415045258.199825-28-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Secure erase is a very different operation from discard in that it is a data integrity operation vs hint. Fully split the limits and helper infrastructure to make the separation more clear. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2] Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by:
Chao Yu <chao@kernel.org> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Abstract away implementation details from file systems by providing a block_device based helper to retrieve the discard granularity. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Link: https://lore.kernel.org/r/20220415045258.199825-26-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Just use a non-zero max_discard_sectors as an indicator for discard support, similar to what is done for write zeroes. The only places where needs special attention is the RAID5 driver, which must clear discard support for security reasons by default, even if the default stacking rules would allow for it. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to query the number of sectors support per each discard bio based on the block device and use this helper to stop various places from poking into the request_queue to see if discard is supported and if so how much. This mirrors what is done e.g. for write zeroes as well. Signed-off-by:
-
Christoph Hellwig authored
Move all the logic to limit the discard bio size into a common helper so that it is better documented. Signed-off-by:
Coly Li <colyli@suse.de> Reviewed-by:
-
Christoph Hellwig authored
No need to inline these fairly larger helpers. Also fix the return value to be unsigned, just like the field in struct queue_limits. Signed-off-by:
-
Christoph Hellwig authored
Use the bdev based alignment helper instead of open coding it. Signed-off-by:
-
Christoph Hellwig authored
Just use bdev_alignment_offset in disk_discard_alignment_show instead. That helpers is the same except for an always false branch that doesn't matter in this slow path. Signed-off-by:
-
Christoph Hellwig authored
No need to inline these fairly larger helpers. Signed-off-by:
-
Christoph Hellwig authored
This does the same as the open coded variant except for an extra branch, and allows to remove queue_alignment_offset entirely. Signed-off-by:
-
Christoph Hellwig authored
Replace the open coded offset calculation with the proper helper. This is an ABI change in that the -1 for a misaligned partition is properly propagated, which can be considered a bug fix and matches what is done on the whole device. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to check the max supported sectors for zone append based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
Christoph Hellwig authored
Add a helper to check the stable writes flag based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to check the FUA flag based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to check the write cache flag based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by:
-
Christoph Hellwig authored
Add a helper to check the nonrot flag based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by:
-
Christoph Hellwig authored
Use the bdev based helper instead of poking into the queue. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
David Sterba <dsterba@suse.com> Reviewed-by:
-
Christoph Hellwig authored
Sanitize the calling conventions and use a goto label to cleanup the code flow. Signed-off-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20220415045258.199825-8-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
The bdev version does the right thing for partitions, so use that. Fixes: 9104d31a ("drbd: introduce WRITE_SAME support") Signed-off-by:
-
Christoph Hellwig authored
Use the bdev based limits helpers where they exist. Signed-off-by:
-
Christoph Hellwig authored
Fold each branch into its only caller. Signed-off-by:
-
Christoph Hellwig authored
Use the proper bdev_discard_alignment helper that accounts for partition offsets. Fixes: c66ac9db ("[SCSI] target: Add LIO target core v4.0.0-rc6") Signed-off-by:
-
Christoph Hellwig authored
The SCSI target drivers is a consumer of the block layer and shoul d generally work on struct block_device. Signed-off-by:
-
Christoph Hellwig authored
For block devices, the SCSI target drivers implements UNMAP as calls to blkdev_issue_discard, which does not guarantee zeroing just because Write Zeroes is supported. Note that this does not affect the file backed path which uses fallocate to punch holes. Fixes: 2237498f ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Signed-off-by:
-
Jan Kara authored
Bios queued into BFQ IO scheduler can be associated with a cgroup that was already offlined. This may then cause insertion of this bfq_group into a service tree. But this bfq_group will get freed as soon as last bio associated with it is completed leading to use after free issues for service tree users. Fix the problem by making sure we always operate on online bfq_group. If the bfq_group associated with the bio is not online, we pick the first online parent. CC: stable@vger.kernel.org Fixes: e21b7a0b ("block, bfq: add full hierarchical scheduling and cgroups support") Tested-by:
"yukuai (C)" <yukuai3@huawei.com> Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
-
Jan Kara authored
BFQ usage of __bio_blkcg() is a relict from the past. Furthermore if bio would not be associated with any blkcg, the usage of __bio_blkcg() in BFQ is prone to races with the task being migrated between cgroups as __bio_blkcg() calls at different places could return different blkcgs. Convert BFQ to the new situation where bio->bi_blkg is initialized in bio_set_dev() and thus practically always valid. This allows us to save blkcg_gq lookup and noticeably simplify the code. CC: stable@vger.kernel.org Fixes: 0fe061b9 ("blkcg: fix ref count issue with bio_blkcg() using task_css") Tested-by:
-
Jan Kara authored
Track whether bfq_group is still online. We cannot rely on blkcg_gq->online because that gets cleared only after all policies are offlined and we need something that gets updated already under bfqd->lock when we are cleaning up our bfq_group to be able to guarantee that when we see online bfq_group, it will stay online while we are holding bfqd->lock lock. CC: stable@vger.kernel.org Tested-by:
-
Jan Kara authored
We call bfq_init_rq() from request merging functions where requests we get should have already gone through bfq_init_rq() during insert and anyway we want to do anything only if the request is already tracked by BFQ. So replace calls to bfq_init_rq() with RQ_BFQQ() instead to simply skip requests untracked by BFQ. We move bfq_init_rq() call in bfq_insert_request() a bit earlier to cover request merging and thus can transfer FIFO position in case of a merge. CC: stable@vger.kernel.org Tested-by:
-
