- 20 May, 2018 22 commits
-
-
Martin Kelly authored
Sometimes it's useful to stream samples forever, such as when stress-testing a driver overnight to check for memory leaks or other issues. When the program receives a signal, it will gracefully cleanup, so it is still safe to terminate at any time. Add support for specifying a negative -c option, meaning that we should loop forever. To do so, we need to use a long long (instead of just long) for num_loops so that current code specifying num_loops greater than UNSIGNED_LONG_MAX doesn't break. Signed-off-by:
Martin Kelly <mkelly@xevo.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Martin Kelly authored
Several types are mismatched and causing implicit conversions. Fix them up so the types match. Signed-off-by:
-
Jonathan Cameron authored
I announced the intent to drop some of these meter drivers on the IIO list last cycle. This device is obsolete and not easily obtained. No one has come forward with suitable test hardware and the driver would need a lot of work to move out of staging. As such I am dropping it. We can always bring it back again if a user / tester emerges in the future. Signed-off-by: -
Jonathan Cameron authored
I announced the intent to drop some of these meter drivers on the IIO list last cycle. This device is obsolete and not easily obtained. No one has come forward with suitable test hardware and the driver would need a lot of work to move out of staging. As such I am dropping it. We can always bring it back again if a user / tester emerges in the future. Signed-off-by: -
Jonathan Cameron authored
I announced the intent to drop some of these meter drivers on the IIO list last cycle. This device is obsolete and not easily obtained. No one has come forward with suitable test hardware and the driver would need a lot of work to move out of staging. As such I am dropping it. We can always bring it back again if a user / tester emerges in the future. Signed-off-by: -
Jonathan Cameron authored
I announced the intent to drop some of these meter drivers on the IIO list last cycle. This device is obsolete and not easily obtained. No one has come forward with suitable test hardware and the driver would need a lot of work to move out of staging. As such I am dropping it. We can always bring it back again if a user / tester emerges in the future. Signed-off-by: -
David Veenstra authored
Move the iio driver for the ad2s1200 and ad2s1205 resolver-to-digital converter out of staging, into mainline iio subsystems. Signed-off-by:
David Veenstra <davidjulianveenstra@gmail.com> Signed-off-by:
-
David Veenstra authored
Add David Veenstra as a copyright holders and as an author, for all of the staging clean ups of the ad2s1200 driver. Signed-off-by:
-
David Veenstra authored
A scaling factor of approximately 2 * Pi / (2^12 -1) is added, to scale the 12-bits angular position to radians. A return type of IIO_VAL_INT_PLUS_NANO is used, so that the scale of both the angle channel and angular velocity channel has 7 significant digits. Signed-off-by:
-
David Veenstra authored
The sysfs iio ABI states radians per second is expected as the unit for angular velocity, but the 12-bit angular velocity register has revolution per seconds as its unit. So a scaling factor of approximately 2 * Pi is added to the angular velocity channel. Signed-off-by:
-
David Veenstra authored
Add device tree table for matching with the vendor ID. Signed-off-by:
-
David Veenstra authored
Remove usage of platform data, and replace it with device tree facilities. Signed-off-by:
-
David Veenstra authored
The legacy, integer based gpio API is replaced with the modern descriptor based API. Signed-off-by:
-
David Veenstra authored
The spi should be set up before the device is registered as an iio device. This patch moves the setup to before the device registration. Signed-off-by:
-
David Veenstra authored
Add missing kernel docs to the ad2s1200 driver state. Signed-off-by:
-
David Veenstra authored
Remove 2 initializations which are unneeded, because the initialized values are never used. Signed-off-by:
-
David Veenstra authored
Remove unneeded newline in license, as it does not improve readability. Signed-off-by:
-
Stefan Popa authored
The AD5681R/AD5682R/AD5683/AD5683R are a family of one channel DACs with 12-bit, 14-bit and 16-bit precision respectively. The devices have either no built-in reference, or built-in 2.5V reference. These devices are similar to AD5691R/AD5692R/AD5693/AD5693R except with a few notable differences: * they use the SPI interface instead of I2C * in the write control register, DB18 and DB17 are used for setting the power mode, while DB16 is the REF bit. This is why a new regmap type was defined and checked accordingly. * the shift register is 24 bits wide, the first four bits are the command bits followed by the data bits. As the data comprises of 20-bit, 18-bit or 16-bit input code, this means that 4 LSB bits are don't care. This is why the data needs to be shifted on the left with four bits. Therefore, AD5683_REGMAP is checked inside a switch case in the ad5686_spi_write() function. On the other hand, similar devices such as AD5693R family, have the 4 MSB command bits followed by 4 don't care bits. Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5683R_5682R_5681R_5683.pdfSigned-off-by:
Stefan Popa <stefan.popa@analog.com> Signed-off-by:
-
Stefan Popa authored
The AD5691R/AD5692R/AD5693/AD5693R are a family of one channel DACs with 12-bit, 14-bit and 16-bit precision respectively. The devices have either no built-in reference, or built-in 2.5V reference. These devices are pretty similar to AD5671R/AD5675R and AD5694/AD5694R/AD5695R/AD5696/AD5696R, except that they have one channel. Another difference is that they use a write control register(addr 0x04) for setting the power down modes and the internal reference instead of separate registers for each function. Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5693R_5692R_5691R_5693.pdfSigned-off-by:
-
Fabrice Gasnier authored
Fix the following sparse warnings: CHECK drivers/iio/adc/stm32-dfsdm-adc.c symbol 'stm32_dfsdm_get_buff_cb' was not declared. Should it be static? symbol 'stm32_dfsdm_release_buff_cb' was not declared. Should it be static? BTW, move interrupt.h to sort headers alphabetically. Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Brian Masney authored
The times reported by the in_illuminance_integration_time_available sysfs attribute are actually in milliseconds, not microseconds. This patch corrects the times with the correct unit. The fixes tag is inaccurate as the issue existed when the driver was still in staging. However, lots of changes occured before it graduated so this is as a good a point as any for backports. Signed-off-by:
Brian Masney <masneyb@onstation.org> Fixes: f44d5c8a ("staging: iio: tsl2583: move out of staging") Signed-off-by:
-
- 12 May, 2018 15 commits
-
-
Brian Masney authored
Move the tsl2772 driver out of staging and into mainline. Signed-off-by:
-
Brian Masney authored
This patch renames this driver from tsl2x7x to tsl2772 since it is highly likely that additional devices will be added to this driver that do not match that wildcard. The tsl2772 driver name was selected since that is currently the device with the most features that are supported by this driver. This patch also adds Brian Masney's copyright to tsl2772.h for all of the work that has been done to move this driver out of staging. Signed-off-by:
-
Brian Masney authored
The CALIBBIAS and INT_TIME masks in tsl2x7x_write_raw did not have any range checking in place so this patch adds the appropriate range checking. The defines TSL2X7X_ALS_GAIN_TRIM_{MIN,MAX} are also introduced by this patch. Signed-off-by: -
Brian Masney authored
The thresh periods assumed an integration time of 3ms. This patch adds support for the correct integration time (2.72ms or 2.73ms). The code had the ALS filter values as going up to 15, however the values actually went up to 60 since the values scaled in increments of 5 once the persistence value went above 3. Signed-off-by:
-
Brian Masney authored
Make the sysfs attributes in_proximity0_calibscale_available, and in_intensity0_{calibscale,integration_time}_available be created using info_mask_separate_available on the channel configuration. The driver assumed that the ALS increment was 2.72 ms, and the upper range was 696 ms. Some other supported devices use 2.73 ms - 699 ms. This patch adds support for the multiple ranges. Signed-off-by: -
Brian Masney authored
This patch creates a macro that populates the tsl2X7X_device_info structure to reduce duplicated code in the driver. Signed-off-by:
-
Brian Masney authored
This patch turns the chip off if IIO device registration fails so that the error handling mirrors the device remove to make review easier in preparation for moving this driver out of staging. This patch also adds a missing error check in the call to tsl2x7x_chip_on() in tsl2x7x_probe(). Signed-off-by:
-
Brian Masney authored
This patch changes the functions tsl2x7x_read_event_value() and tsl2x7x_read_raw() to use direct returns to simplify the code. Signed-off-by:
-
Brian Masney authored
This patch removes unnecessary whitespace in preparation for moving this driver out of staging. Signed-off-by:
-
Richard Tresidder authored
Modified the sleep method when data is not ready to allow for sampling > 50sps to work. Signed-off-by:
Richard Tresidder <rtresidd@electromag.com.au> Signed-off-by:
-
Sean Nyekjaer authored
Signed-off-by:
Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by:
-
Matt Ranostay authored
LMP91002 is register compatible so add devicetree and i2c client ids Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Richard Tresidder authored
Adds the ability to run the Mag3110 in continuous mode to speed up the sampling rate. Depending on the sampling rate requested the device can be put in or out of continuous mode automatically. Shifting out of continuous mode requires a potential 1 / ODR wait which is also implemented. Modified the sleep method when data is not ready to allow for sampling > 50sps to work. Signed-off-by:
-
Fabrice Gasnier authored
Add support for DFSDM (Digital Filter For Sigma Delta Modulators) to STM32MP1. This variant is close to STM32H7 DFSDM, it implements 6 filter instances. Registers map is also increased. Signed-off-by:
-
Martin Kelly authored
Prior to this loop, we check if fifo_count < bytes_per_datum and bail if so. This means that when we hit the loop, we know that fifo_count >= bytes_per_datum, so the check is unneeded and we can turn the loop into a do-while for a slight performance improvement. Signed-off-by:
-
- 11 May, 2018 3 commits
-
-
Tim Collier authored
Fix checkpatch warning for misaligned * characters in the block comment at the start of p80211metastruct.h; with this change the file is checkpatch clean. Signed-off-by:
Tim Collier <osdevtc@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Anholt authored
The arg is a u32 *, so switch over to that in our declarations. Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Eric Anholt authored
Fixes a compiler warning about a set-but-not-used variable. I think this was just leftover dead code from before set_framerate_params(), since that also sets up some mmal_parameter_rational structs for fps. Signed-off-by:
-
