- 13 Aug, 2010 40 commits
-
-
Uwe Kleine-König authored
commit 868003ca upstream. This is a follow up to 14cb0deb (arm/imx/gpio: add spinlock protection) and fixes the following build failure: CC arch/arm/mach-imx/pcm970-baseboard.o In file included from arch/arm/include/asm/gpio.h:6, from include/linux/gpio.h:8, from arch/arm/mach-imx/pcm970-baseboard.c:20: arch/arm/plat-mxc/include/mach/gpio.h:40: error: expected specifier-qualifier-list before 'spinlock_t' Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Will Deacon authored
commit cdf357f1 upstream. On versions of the Cortex-A9 prior to r2p0, performing TLB invalidations by ASID match can result in the incorrect ASID being broadcast to other CPUs. As a consequence of this, the targetted TLB entries are not invalidated across the system. This workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. Tested-by:
Rob Clark <rob@ti.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Catalin Marinas authored
commit 492c5d94 upstream. On SMP systems, the SMSC911x registers may be accessed by multiple CPUs and this seems to put the chip in an inconsistent state. The patch adds spinlocks to the smsc911x_reg_read, smsc911x_reg_write, smsc911x_rx_readfifo and smsc911x_tx_writefifo functions. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Igor Grinberg authored
commit a6cd7eb3 upstream. ffuart is available on cm-x300 only with pxa300. Signed-off-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
-
Nathan Lynch authored
commit a2a20c41 upstream. If signalfd is used to consume a signal generated by a POSIX interval timer or POSIX message queue, the ssi_int field does not reflect the data (sigevent->sigev_value) supplied to timer_create(2) or mq_notify(3). (The ssi_ptr field, however, is filled in.) This behavior differs from signalfd's treatment of sigqueue-generated signals -- see the default case in signalfd_copyinfo. It also gives results that differ from the case when a signal is handled conventionally via a sigaction-registered handler. So, set signalfd_siginfo->ssi_int in the remaining cases (__SI_TIMER, __SI_MESGQ) where ssi_ptr is set. akpm: a non-back-compatible change. Merge into -stable to minimise the number of kernels which are in the field and which miss this feature. Signed-off-by:
Nathan Lynch <ntl@pobox.com> Acked-by:
Davide Libenzi <davidel@xmailserver.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tejun Heo authored
commit aca27ba9 upstream. Commit a82afdfc (block: use the same failfast bits for bio and request) moved BIO_RW_* bits around such that they match up with REQ_* bits. Unfortunately, fs.h hard coded RW_MASK, RWA_MASK, READ, WRITE, READA and SWRITE as 0, 1, 2 and 3, and expected them to match with BIO_RW_* bits. READ/WRITE didn't change but BIO_RW_AHEAD was moved to bit 4 instead of bit 1, breaking RWA_MASK, READA and SWRITE. This patch updates RWA_MASK, READA and SWRITE such that they match the BIO_RW_* bits again. A follow up patch will update the definitions to directly use BIO_RW_* bits so that this kind of breakage won't happen again. Neil also spotted missing RWA_MASK conversion. Stable: The offending commit a82afdfc was released with v2.6.32, so this patch should be applied to all kernels since then but it must _NOT_ be applied to kernels earlier than that. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-and-bisected-by:
Vladislav Bolkhovitin <vst@vlnb.net> Root-caused-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Jens Axboe <jaxboe@fusionio.com> Signed-off-by:
-
Philipp Reisner authored
commit 6710a576 upstream. Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
-
Philipp Reisner authored
commit 85f4cc17 upstream. Signed-off-by:
-
Julia Lawall authored
commit ceeab929 upstream. The comments in the code indicate that file_info should be released if the function fails. This releasing is done at the label out_free, not out. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = kmem_cache_zalloc(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return <+...x...+>; | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmem_cache_zalloc %s" % (p1[0].file,p1[0].line) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by:
-
Lino Sanfilippo authored
commit 31f73bee upstream. In ecryptfs_lookup_and_interpose_lower() the lower mount is not decremented if allocation of a dentry info struct failed. As a result the lower filesystem cant be unmounted any more (since it is considered busy). This patch corrects the reference counting. Signed-off-by:
Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by:
-
Tyler Hicks authored
commit c43f7b8f upstream. Lower filesystems that only implemented unlocked_ioctl weren't being passed ioctl calls because eCryptfs only checked for lower_file->f_op->ioctl and returned -ENOTTY if it was NULL. eCryptfs shouldn't implement ioctl(), since it doesn't require the BKL. This patch introduces ecryptfs_unlocked_ioctl() and ecryptfs_compat_ioctl(), which passes the calls on to the lower file system. https://bugs.launchpad.net/ecryptfs/+bug/469664Reported-by:
James Dupin <james.dupin@gmail.com> Signed-off-by:
-
Chris Wright authored
commit b7300b78 upstream. The cgroup device whitelist code gets confused when trying to grant permission to a disk partition that is not currently open. Part of blkdev_open() includes __blkdev_get() on the whole disk. Basically, the only ways to reliably allow a cgroup access to a partition on a block device when using the whitelist are to 1) also give it access to the whole block device or 2) make sure the partition is already open in a different context. The patch avoids the cgroup check for the whole disk case when opening a partition. Addresses https://bugzilla.redhat.com/show_bug.cgi?id=589662Signed-off-by:
Chris Wright <chrisw@sous-sol.org> Acked-by:
Serge E. Hallyn <serue@us.ibm.com> Tested-by:
Vivek Goyal <vgoyal@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: "Daniel P. Berrange" <berrange@redhat.com> Signed-off-by:
-
Al Viro authored
commit 7a4dec53 upstream. If sget() finds a matching superblock being set up, it'll grab an active reference to it and grab s_umount. That's fine - we'll wait for completion of foofs_get_sb() that way. However, if said foofs_get_sb() fails we'll end up holding the halfway-created superblock. deactivate_locked_super() called by foofs_get_sb() will just unlock the sucker since we are holding another active reference to it. What we need is a way to tell if superblock has been successfully set up. Unfortunately, neither ->s_root nor the check for MS_ACTIVE quite fit. Cheap and easy way, suitable for backport: new flag set by the (only) caller of ->get_sb(). If that flag isn't present by the time sget() grabbed s_umount on preexisting superblock it has found, it's seeing a stillborn and should just bury it with deactivate_locked_super() (and repeat the search). Longer term we want to set that flag in ->get_sb() instances (and check for it to distinguish between "sget() found us a live sb" and "sget() has allocated an sb, we need to set it up" in there, instead of checking ->s_root as we do now). Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Dan Williams authored
commit 556ab45f upstream. On some platforms (MacPro3,1) the BIOS assigns the ioatdma device to the incorrect iommu causing faults when the driver initializes. Add a quirk to catch this misconfiguration and try falling back to untranslated operation (which works in the MacPro3,1 case). Assuming there are other platforms with misconfigured iommus teach the ioatdma driver to treat initialization failures as non-fatal (just fail the driver load and emit a warning instead of triggering a BUG_ON). This can be classified as a boot regression since 2.6.32 on affected platforms since the ioatdma module did not autoload prior to that kernel. Acked-by:
David Woodhouse <David.Woodhouse@intel.com> Reported-by:
Chris Li <lkml@chrisli.org> Tested-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Jeff Kirsher authored
commit 2d0bb1c1 upstream. Based on patches from Sonny Rao and Milton Miller... Combined the patches to fix up clean_tx_irq and clean_rx_irq. The PowerPC architecture does not require loads to independent bytes to be ordered without adding an explicit barrier. In ixgbe_clean_rx_irq we load the status bit then load the packet data. With packet split disabled if these loads go out of order we get a stale packet, but we will notice the bad sequence numbers and drop it. The problem occurs with packet split enabled where the TCP/IP header and data are in different descriptors. If the reads go out of order we may have data that doesn't match the TCP/IP header. Since we use hardware checksumming this bad data is never verified and it makes it all the way to the application. This bug was found during stress testing and adding this barrier has been shown to fix it. The bug can manifest as a data integrity issue (bad payload data) or as a BUG in skb_pull(). This was a nasty bug to hunt down, if people agree with the fix I think it's a candidate for stable. Previously Submitted to e1000-devel only for ixgbe http://marc.info/?l=e1000-devel&m=126593062701537&w=3 We've now seen this problem hit with other device drivers (e1000e mostly) So I'm resubmitting with fixes for other Intel Device Drivers with similar issues. CC: Milton Miller <miltonm@bga.com> CC: Anton Blanchard <anton@samba.org> CC: Sonny Rao <sonnyrao@us.ibm.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
NeilBrown authored
commit 51e9ac77 upstream. If the 'bio_split' path in raid10-read is used while resync/recovery is happening it is possible to deadlock. Fix this be elevating ->nr_waiting for the duration of both parts of the split request. This fixes a bug that has been present since 2.6.22 but has only started manifesting recently for unknown reasons. It is suitable for and -stable since then. Reported-by:
Justin Bronder <jsbronder@gentoo.org> Tested-by:
-
NeilBrown authored
commit bb4f1e9d upstream. Move the deletion of sysfs attributes from reconfig_mutex to open_mutex didn't really help as a process can try to take open_mutex while holding reconfig_mutex, so the same deadlock can happen, just requiring one more process to be involved in the chain. I looks like I cannot easily use locking to wait for the sysfs deletion to complete, so don't. The only things that we cannot do while the deletions are still pending is other things which can change the sysfs namespace: run, takeover, stop. Each of these can fail with -EBUSY. So set a flag while doing a sysfs deletion, and fail run, takeover, stop if that flag is set. This is suitable for 2.6.35.x Signed-off-by:
-
Dan Williams authored
commit 147e0b6a upstream. Commit b821eaa5 "md: remove ->changed and related code" moved revalidate_disk() under open_mutex, and lockdep noticed. [ INFO: possible circular locking dependency detected ] 2.6.32-mdadm-locking #1 ------------------------------------------------------- mdadm/3640 is trying to acquire lock: (&bdev->bd_mutex){+.+.+.}, at: [<ffffffff811acecb>] revalidate_disk+0x5b/0x90 but task is already holding lock: (&mddev->open_mutex){+.+...}, at: [<ffffffffa055e07a>] do_md_stop+0x4a/0x4d0 [md_mod] which lock already depends on the new lock. It is suitable for 2.6.35.x Reported-by:
Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com> Signed-off-by:
-
Borislav Petkov authored
commit 11071282 upstream. ide_cd_error_cmd() can complete an erroneous request with leftover buffers. Signal this with its return value so that the request is not accessed after its completion in the irq handler and we oops. Signed-off-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Yinghai Lu authored
commit d9e1b6c4 upstream. After the commit that changed ipmi_si detecting sequence from SMBIOS/ACPI to ACPI/SMBIOS, | commit 754d4531 | Author: Matthew Garrett <mjg@redhat.com> | Date: Wed May 26 14:43:47 2010 -0700 | | ipmi: change device discovery order | | The ipmi spec provides an ordering for si discovery. Change the driver to | match, with the exception of preferring smbios to SPMI as HPs (at least) | contain accurate information in the former but not the latter. ipmi_si can not be initialized. [ 138.799739] calling init_ipmi_devintf+0x0/0x109 @ 1 [ 138.805050] ipmi device interface [ 138.818131] initcall init_ipmi_devintf+0x0/0x109 returned 0 after 12797 usecs [ 138.822998] calling init_ipmi_si+0x0/0xa90 @ 1 [ 138.840276] IPMI System Interface driver. [ 138.846137] ipmi_si: probing via ACPI [ 138.849225] ipmi_si 00:09: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 138.864438] ipmi_si: Adding ACPI-specified kcs state machine [ 138.870893] ipmi_si: probing via SMBIOS [ 138.880945] ipmi_si: Adding SMBIOS-specified kcs state machineipmi_si: duplicate interface [ 138.896511] ipmi_si: probing via SPMI [ 138.899861] ipmi_si: Adding SPMI-specified kcs state machineipmi_si: duplicate interface [ 138.917095] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 138.928658] ipmi_si: Interface detection failed [ 138.953411] initcall init_ipmi_si+0x0/0xa90 returned 0 after 110847 usecs in smbios has DMI/SMBIOS Handle 0x00C5, DMI type 38, 18 bytes IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x00 NV Storage Device: Not Present Base Address: 0x0000000000000CA2 (I/O) Register Spacing: 32-bit Boundaries in DSDT has Device (BMC) { Name (_HID, EisaId ("IPI0001")) Method (_STA, 0, NotSerialized) { If (LEqual (OSN, Zero)) { Return (Zero) } Return (0x0F) } Name (_STR, Unicode ("IPMI_KCS")) Name (_UID, Zero) Name (_CRS, ResourceTemplate () { IO (Decode16, 0x0CA2, // Range Minimum 0x0CA2, // Range Maximum 0x00, // Alignment 0x01, // Length ) IO (Decode16, 0x0CA6, // Range Minimum 0x0CA6, // Range Maximum 0x00, // Alignment 0x01, // Length ) }) Method (_IFT, 0, NotSerialized) { Return (One) } Method (_SRV, 0, NotSerialized) { Return (0x0200) } } so the reg spacing should be 4 instead of 1. Try to calculate regspacing for this kind of system. Observed on a Sun Fire X4800. Other OSes work and pass certification. Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by:
Matthew Garrett <mjg@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Myron Stowe <myron.stowe@hp.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by:
-
John W. Linville authored
commit 8f1d2d2b upstream. ieee80211_beacon_get can return NULL... Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Johannes Berg authored
commit e95b7435 upstream. The TX tracing code copies with the wrong length, which will typically copy too little data. Fix this by using the correct length variable. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Peter Huewe authored
commit fa260c00 upstream. Fix a build failure "error: void value not ignored as it ought to be" by removing an assignment of a void return value. The functionality of the code is not changed. Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Acked-by:
Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
commit 966cca02 upstream. Since 2.6.31, swap_map[]'s refcounting was changed to show that a used swap entry is just for swap-cache, can be reused. Then, while scanning free entry in swap_map[], a swap entry may be able to be reclaimed and reused. It was caused by commit c9e44410 ("mm: reuse unused swap entry if necessary"). But this caused deta corruption at resume. The scenario is - Assume a clean-swap cache, but mapped. - at hibernation_snapshot[], clean-swap-cache is saved as clean-swap-cache and swap_map[] is marked as SWAP_HAS_CACHE. - then, save_image() is called. And reuse SWAP_HAS_CACHE entry to save image, and break the contents. After resume: - the memory reclaim runs and finds clean-not-referenced-swap-cache and discards it because it's marked as clean. But here, the contents on disk and swap-cache is inconsistent. Hance memory is corrupted. This patch avoids the bug by not reclaiming swap-entry during hibernation. This is a quick fix for backporting. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Reported-by:
Ondreg Zary <linux@rainbow-software.org> Tested-by:
Andrea Gelmini <andrea.gelmini@gmail.com> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Jiri Slaby authored
commit bf9c1fca upstream. Sorry, one more fix, this one depends on the other, so this is rather 2/2. -- tty->driver_data is used all over the code, but never set. This results in oopses like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000130 IP: [<ffffffff814a0040>] mutex_lock+0x10/0x40 ... Pid: 2157, comm: modem-manager Not tainted 2.6.34.1-0.1-desktop #1 2768DR7/2768DR7 RIP: 0010:[<ffffffff814a0040>] [<ffffffff814a0040>] mutex_lock+0x10/0x40 RSP: 0018:ffff88007b16fa50 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000130 RCX: 0000000000000003 RDX: 0000000000000003 RSI: 0000000000000286 RDI: 0000000000000130 RBP: 0000000000001000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000130 R13: 0000000000000001 R14: 0000000000000000 R15: ffff88007b16feb4 ... Call Trace: [<ffffffffa077690d>] ntty_write_room+0x4d/0x90 [nozomi] ... Set tty->driver_data to the computed port in .install to not recompute it in every place where needed. Switch .open to use driver_data too. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Jiri Slaby authored
commit ee78bb95 upstream. Currently ntty_install omits to increment tty count and we get the following warnings: Warning: dev (noz2) tty->count(0) != #fd's(1) in tty_open So to fix that, add one tty->count++ there. Signed-off-by:
-
Takashi Iwai authored
commit e096c8e6 upstream. An Intel board needs a white-list entry to enable PC-beep. Otherwise the driver misdetects (due to bogus BIOS info) and ignores the PC-beep on 2.6.35. Reported-and-tested-by:
Leandro Lucarella <luca@llucax.com.ar> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Suresh Siddha authored
commit 68f202e4 upstream. Use the stop machine context rather than IPI's to rendezvous all the cpus for MTRR initialization that happens during cpu bringup or for MTRR modifications during runtime. This avoids deadlock scenario (reported by Prarit) like: cpu A holds a read_lock (tasklist_lock for example) with irqs enabled cpu B waits for the same lock with irqs disabled using write_lock_irq cpu C doing set_mtrr() (during AP bringup for example), which will try to rendezvous all the cpus using IPI's This will result in C and A come to the rendezvous point and waiting for B. B is stuck forever waiting for the lock and thus not reaching the rendezvous point. Using stop cpu (run in the process context of per cpu based keventd) to do this rendezvous, avoids this deadlock scenario. Also make sure all the cpu's are in the rendezvous handler before we proceed with the local_irq_save() on each cpu. This lock step disabling irqs on all the cpus will avoid other deadlock scenarios (for example involving with the blocking smp_call_function's etc). [ This problem is very old. Marking -stable only for 2.6.35 as the stop_one_cpu_nowait() API is present only in 2.6.35. Any older kernel interested in this fix need to do some more work in backporting this patch. ] Reported-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1280515602.2682.10.camel@sbsiddha-MOBL3.sc.intel.com> Acked-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
David Woodhouse authored
commit 1f6ea6e5 upstream. We were seeing faults in the solos-pci receive tasklet when packets arrived for a VCC which was currently being closed: [18842.727906] EIP: [<e082f490>] br2684_push+0x19/0x234 [br2684] SS:ESP 0068:dfb89d14 [18845.090712] [<c13ecff3>] ? do_page_fault+0x0/0x2e1 [18845.120042] [<e082f490>] ? br2684_push+0x19/0x234 [br2684] [18845.153530] [<e084fa13>] solos_bh+0x28b/0x7c8 [solos_pci] [18845.186488] [<e084f711>] ? solos_irq+0x2d/0x51 [solos_pci] [18845.219960] [<c100387b>] ? handle_irq+0x3b/0x48 [18845.247732] [<c10265cb>] ? irq_exit+0x34/0x57 [18845.274437] [<c1025720>] tasklet_action+0x42/0x69 [18845.303247] [<c102643f>] __do_softirq+0x8e/0x129 [18845.331540] [<c10264ff>] do_softirq+0x25/0x2a [18845.358274] [<c102664c>] _local_bh_enable_ip+0x5e/0x6a [18845.389677] [<c102666d>] local_bh_enable+0xb/0xe [18845.417944] [<e08490a8>] ppp_unregister_channel+0x32/0xbb [ppp_generic] [18845.458193] [<e08731ad>] pppox_unbind_sock+0x18/0x1f [pppox] This patch uses an RCU-inspired approach to fix it. In the RX tasklet's find_vcc() function we first refuse to use a VCC which already has the ATM_VF_READY bit cleared. And in the VCC close function, we synchronise with the tasklet to ensure that it can't still be using the VCC before we continue and allow the VCC to be destroyed. Signed-off-by:
Nathan Williams <nathan@traverse.com.au> Signed-off-by:
-
Tejun Heo authored
commit 549e1561 upstream. MSI delivery from on-board ahci controller doesn't work on K8M800. At this point, it's unclear whether the culprit is with the ahci controller or the host bridge. Given the track record and considering the rather minimal impact of MSI, disabling it seems reasonable. Signed-off-by:
Rainer Hurtado Navarro <publio.escipion.el.africano@gmail.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Rafael J. Wysocki authored
commit 3d2a5318 upstream. There is no reason to run NVidia-specific quirks related to HT MSI mappings with MSI disabled via pci=nomsi, so make __nv_msi_ht_cap_quirk() return immediately in that case. This allows at least one machine to boot 100% of the time with pci=nomsi (it still doesn't boot reliably without that). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16443 . Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Lytochkin Boris authored
commit e847003f upstream. Signed-off-by:
Lytochkin Boris <lytboris@gmail.com> Tested-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Haiyang Zhang authored
commit 54d2379c upstream. LBDAF is not available nor necessary on 64BIT kernel. This patch fixed the dependency for hv_blkvsc module on 64BIT kernel. Thanks vrataj2 [vrataj2@comcast.net] for reporting this problem. Reported-by:
vrataj2 <vrataj2@comcast.net> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Hank Janssen <hjanssen@microsoft.com> Signed-off-by:
-
Peter Huewe authored
commit 060132ae upstream. This patch prevents the code from calling parport_release and parport_unregister_device twice with the same arguments - and thus fixes an oops. Rationale: After the first call the parport is already released and the handle isn't valid anymore and calling parport_release and parport_unregister_device twice isn't a good idea. Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Randy Dunlap authored
commit e928c077 upstream. line6 uses snd_pcm*() functions, so it should select SND_PCM. ERROR: "snd_pcm_period_elapsed" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_set_ops" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_lib_free_pages" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_lib_ioctl" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_lib_malloc_pages" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_hw_constraint_ratdens" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_format_physical_width" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_lib_preallocate_pages_for_all" [drivers/staging/line6/line6usb.ko] undefined! ERROR: "snd_pcm_new" [drivers/staging/line6/line6usb.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Markus Grabner <grabner@icg.tugraz.at> Signed-off-by:
-
Larry Finger authored
commit 5d92fe33 upstream. Device missing from current tables. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Tested-by:
Rod Huffaker <rod.huffaker@gmail.com> Signed-off-by:
-
H. Peter Anvin authored
commit 113fc5a6 upstream. xchg() and cmpxchg() modify their memory operands, not merely read them. For some versions of gcc the "memory" clobber has apparently dealt with the situation, but not for all. Originally-by:
H. Peter Anvin <hpa@zytor.com> Cc: Glauber Costa <glommer@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Peter Palfrader <peter@palfrader.org> Cc: Greg KH <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Zachary Amsden <zamsden@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> LKML-Reference: <4C4F7277.8050306@zytor.com> Signed-off-by:
-
Dominik Brodowski authored
commit 127c03cd upstream. NR_IRQS may be as low as 16, causing a (harmless?) buffer overflow in pcmcia_setup_isa_irq(): static u8 pcmcia_used_irq[NR_IRQS]; ... if ((try < 32) && pcmcia_used_irq[irq]) continue; This is read-only, so if this address would be non-zero, it would just mean we would not attempt an IRQ >= NR_IRQS -- which would fail anyway! And as request_irq() fails for an irq >= NR_IRQS, the setting code path: pcmcia_used_irq[irq]++; is never reached as well. Reported-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Bjorn Helgaas authored
commit 2491762c upstream. This DMI quirk turns on "pci=use_crs" for the ALiveSATA2-GLAN because amd_bus.c doesn't handle this system correctly. The system has a single HyperTransport I/O chain, but has two PCI host bridges to buses 00 and 80. amd_bus.c learns the MMIO range associated with buses 00-ff and that this range is routed to the HT chain hosted at node 0, link 0: bus: [00, ff] on node 0 link 0 bus: 00 index 1 [mem 0x80000000-0xfcffffffff] This includes the address space for both bus 00 and bus 80, and amd_bus.c assumes it's all routed to bus 00. We find device 80:01.0, which BIOS left in the middle of that space, but we don't find a bridge from bus 00 to bus 80, so we conclude that 80:01.0 is unreachable from bus 00, and we move it from the original, working, address to something outside the bus 00 aperture, which does not work: pci 0000:80:01.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit] The BIOS told us everything we need to know to handle this correctly, so we're better off if we just pay attention, which lets us leave the 80:01.0 device at the original, working, address: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xff37ffff] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) pci_root PNP0A08:00: host bridge window [mem 0xfebfc000-0xfebfffff] This was a regression between 2.6.33 and 2.6.34. In 2.6.33, amd_bus.c was used only when we found multiple HT chains. 3e3da00c, which enabled amd_bus.c even on systems with a single HT chain, caused this failure. This quirk was written by Graham. If we ever enable "pci=use_crs" for machines from 2006 or earlir, this quirk should be removed. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16007Reported-by:
Graham Ramsey <ramsey.graham@ntlworld.com> Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Marcin Slusarz authored
commit 8b8f79b9 upstream. After every iounmap mmiotrace has to free kmmio_fault_pages, but it can't do it directly, so it defers freeing by RCU. It usually works, but when mmiotraced code calls ioremap-iounmap multiple times without sleeping between (so RCU won't kick in and start freeing) it can be given the same virtual address, so at every iounmap mmiotrace will schedule the same pages for release. Obviously it will explode on second free. Fix it by marking kmmio_fault_pages which are scheduled for release and not adding them second time. Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Tested-by:
Marcin Kocielnicki <koriakin@0x04.net> Tested-by:
Shinpei KATO <shinpei@il.is.s.u-tokyo.ac.jp> Acked-by:
Pekka Paalanen <pq@iki.fi> Cc: Stuart Bennett <stuart@freedesktop.org> Cc: Marcin Kocielnicki <koriakin@0x04.net> Cc: nouveau@lists.freedesktop.org LKML-Reference: <20100613215654.GA3829@joi.lan> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
