- 10 Feb, 2016 10 commits
-
-
David Hildenbrand authored
On SIE faults, the ilc cannot be detected automatically, as the icptcode is 0. The ilc indicated in the program irq will always be 0. Therefore we have to manually specify the ilc in order to tell the guest which ilen was used when forwarding the PSW. Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
-
David Hildenbrand authored
Program irq injection during program irq intercepts is the last candidates that injects nullifying irqs and relies on delivery to do the right thing. As we should not rely on the icptcode during any delivery (because that value will not be migrated), let's add a flag, telling prog IRQ delivery to not rewind the PSW in case of nullifying prog IRQs. Signed-off-by:
-
David Hildenbrand authored
__extract_prog_irq() is used only once for getting the program check data in one place. Let's combine it with an injection function to avoid a memset and to prevent misuse on injection by simplifying the interface to only have the VCPU as parameter. Reviewed-by:
-
David Hildenbrand authored
Let's use our fresh new function read_guest_instr() to access guest storage via the correct addressing schema. Reviewed-by:
-
David Hildenbrand authored
When an instruction is to be fetched, special handling applies to secondary-space mode and access-register mode. The instruction is to be fetched from primary space. We can easily support this by selecting the right asce for translation. Access registers will never be used during translation, so don't include them in the interface. As we only want to read from the current PSW address for now, let's also hide that detail. Reviewed-by:
-
David Hildenbrand authored
We will need special handling when fetching instructions, so let's introduce new guest access modes GACC_FETCH and GACC_STORE instead of a write flag. An additional patch will then introduce GACC_IFETCH. Reviewed-by:
-
David Hildenbrand authored
We have to migrate the program irq ilc and someday we will have to specify the ilc without KVM trying to autodetect the value. Let's reuse one of the spare fields in our program irq that should always be set to 0 by user space. Because we also want to make use of 0 ilcs ("not available"), we need a validity indicator. If no valid ilc is given, we try to autodetect the ilc via the current icptcode and icptstatus + parameter and store the valid ilc in the irq structure. This has a nice effect: QEMU's making use of KVM_S390_IRQ / KVM_S390_SET_IRQ_STATE / KVM_S390_GET_IRQ_STATE for migration will directly migrate the ilc without any changes. Please note that we use bit 0 as validity and bit 1,2 for the ilc, so by applying the ilc mask we directly get the ilen which is usually what we work with. Reviewed-by: -
David Hildenbrand authored
We have some confusion about ilc vs. ilen in our current code. So let's correctly use the term ilen when dealing with (ilc << 1). Program irq injection didn't take care of the correct ilc in case of irqs triggered by EXECUTE functions, let's provide one function kvm_s390_get_ilen() to take care of all that. Also, manually specifying in intercept handlers the size of the instruction (and sometimes overwriting that value for EXECUTE internally) doesn't make too much sense. So also provide the functions: - kvm_s390_retry_instr to retry the currently intercepted instruction - kvm_s390_rewind_psw to rewind the PSW without internal overwrites - kvm_s390_forward_psw to forward the PSW Reviewed-by:
-
David Hildenbrand authored
As we already store the floating point registers in the vector save area in floating point register format when we don't have MACHINE_HAS_VX, we can directly expose them to user space using a new sync flag. The floating point registers will be valid when KVM_SYNC_FPRS is set. The fpc will also be valid when KVM_SYNC_FPRS is set. Either KVM_SYNC_FPRS or KVM_SYNC_VRS will be enabled, never both. Let's also change two positions where we access vrs, making the code easier to read and one comment superfluous. Suggested-by:
-
David Hildenbrand authored
If we have MACHINE_HAS_VX, the floating point registers are stored in the vector register format, event if the guest isn't enabled for vector registers. So we can allow KVM_SYNC_VRS as soon as MACHINE_HAS_VX is available. This can in return be used by user space to support floating point registers via struct kvm_run when the machine has vector registers. Signed-off-by:
-
- 09 Feb, 2016 8 commits
-
-
Paolo Bonzini authored
Different pieces of code checked for vcpu->arch.apic being (non-)NULL, or used kvm_vcpu_has_lapic (more optimized) or lapic_in_kernel. Replace everything with lapic_in_kernel's name and kvm_vcpu_has_lapic's implementation. Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Do for kvm_cpu_has_pending_timer and kvm_inject_pending_timer_irqs what the other irq.c routines have been doing. Reviewed-by:
-
Paolo Bonzini authored
Usually the in-kernel APIC's existence is checked in the caller. Do not bother checking it again in lapic.c. Reviewed-by:
-
Feng Wu authored
Add host irq information in trace event, so we can better understand which irq is in posted mode. Signed-off-by:
Feng Wu <feng.wu@intel.com> Reviewed-by:
-
Feng Wu authored
Use vector-hashing to deliver lowest-priority interrupts for VT-d posted-interrupts. This patch extends kvm_intr_is_single_vcpu() to support lowest-priority handling. Signed-off-by:
-
Feng Wu authored
Use vector-hashing to deliver lowest-priority interrupts, As an example, modern Intel CPUs in server platform use this method to handle lowest-priority interrupts. Signed-off-by:
-
Feng Wu authored
When the interrupt is not single destination any more, we need to change back IRTE to remapped mode explicitly. Signed-off-by:
-
Paolo Bonzini authored
This is similar to the existing div_frac function, but it returns the remainder too. Unlike div_frac, it can be used to implement long division, e.g. (a << 64) / b for 32-bit a and b. Signed-off-by:
-
- 08 Feb, 2016 4 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "KVM-ARM fixes, mostly coming from the PMU work" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm64: KVM: Fix guest dead loop when register accessor returns false arm64: KVM: Fix comments of the CP handler arm64: KVM: Fix wrong use of the CPSR MODE mask for 32bit guests arm64: KVM: Obey RES0/1 reserved bits when setting CPTR_EL2 arm64: KVM: Fix AArch64 guest userspace exception injection
-
Linus Torvalds authored
Merge tag 'regmap-fix-v4.5-big-endian' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "A single revert back to v4.4 endianness handling. Commit 29bb45f2 ("regmap-mmio: Use native endianness for read/write") attempted to fix some long standing bugs in the MMIO implementation for big endian systems caused by duplicate byte swapping in both regmap and readl()/writel(). Sadly the fix makes things worse rather than better, so revert it for now" * tag 'regmap-fix-v4.5-big-endian' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: mmio: Revert to v4.4 endianness handling
-
Masahiro Yamada authored
Fix the doubled "started" and tidy up the following sentences. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paolo Bonzini authored
Merge tag 'kvm-arm-for-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/ARM fixes for v4.5-rc2 A few random fixes, mostly coming from the PMU work by Shannon: - fix for injecting faults coming from the guest's userspace - cleanup for our CPTR_EL2 accessors (reserved bits) - fix for a bug impacting perf (user/kernel discrimination) - fix for a 32bit sysreg handling bug
-
- 07 Feb, 2016 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "The first real batch of fixes for this release cycle, so there are a few more than usual. Most of these are fixes and tweaks to board support (DT bugfixes, etc). I've also picked up a couple of small cleanups that seemed innocent enough that there was little reason to wait (const/ __initconst and Kconfig deps). Quite a bit of the changes on OMAP were due to fixes to no longer write to rodata from assembly when ARM_KERNMEM_PERMS was enabled, but there were also other fixes. Kirkwood had a bunch of gpio fixes for some boards. OMAP had RTC fixes on OMAP5, and Nomadik had changes to MMC parameters in DT. All in all, mostly the usual mix of various fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: multi_v7_defconfig: enable DW_WATCHDOG ARM: nomadik: fix up SD/MMC DT settings ARM64: tegra: Add chosen node for tegra132 norrin ARM: realview: use "depends on" instead of "if" after prompt ARM: tango: use "depends on" instead of "if" after prompt ARM: tango: use const and __initconst for smp_operations ARM: realview: use const and __initconst for smp_operations bus: uniphier-system-bus: revive tristate prompt arm64: dts: Add missing DMA Abort interrupt to Juno bus: vexpress-config: Add missing of_node_put ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2 ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address ARM: dts: LogicPD Torpedo: Revert Duplicative Entries ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types ARM: dts: am4372: fix irq type for arm twd and global timer ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type ...
-
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox fixes from Jassi Brar: - fix getting element from the pcc-channels array by simply indexing into it - prevent building mailbox-test driver for archs that don't have IOMEM * 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Fix dependencies for !HAS_IOMEM archs mailbox: pcc: fix channel calculation in get_pcc_channel()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB fixes for 4.5-rc3. The usual, xhci fixes for reported issues, combined with some small gadget driver fixes, and a MAINTAINERS file update. All have been in linux-next with no reported issues" * tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: harden xhci_find_next_ext_cap against device removal xhci: Fix list corruption in urb dequeue at host removal usb: host: xhci-plat: fix NULL pointer in probe for device tree case usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TT usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms usb: xhci: set SSIC port unused only if xhci_suspend succeeds usb: xhci: add a quirk bit for ssic port unused usb: xhci: handle both SSIC ports in PME stuck quirk usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver. Revert "xhci: don't finish a TD if we get a short-transfer event mid TD" MAINTAINERS: fix my email address usb: dwc2: Fix probe problem on bcm2835 Revert "usb: dwc2: Move reset into dwc2_get_hwparams()" usb: musb: ux500: Fix NULL pointer dereference at system PM usb: phy: mxs: declare variable with initialized value usb: phy: msm: fix error handling in probe.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging and IIO driver fixes from Greg KH: "Here are some IIO and staging driver fixes for 4.5-rc3. All of them, except one, are for IIO drivers, and one is for a speakup driver fix caused by some earlier patches, to resolve a reported build failure" * tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Staging: speakup: Fix allyesconfig build on mn10300 iio: dht11: Use boottime iio: ade7753: avoid uninitialized data iio: pressure: mpl115: fix temperature offset sign iio: imu: Fix dependencies for !HAS_IOMEM archs staging: iio: Fix dependencies for !HAS_IOMEM archs iio: adc: Fix dependencies for !HAS_IOMEM archs iio: inkern: fix a NULL dereference on error iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer. iio: light: acpi-als: Report data as processed iio: dac: mcp4725: set iio name property in sysfs iio: add HAS_IOMEM dependency to VF610_ADC iio: add IIO_TRIGGER dependency to STK8BA50 iio: proximity: lidar: correct return value iio-light: Use a signed return type for ltr501_match_samp_freq()
-
- 06 Feb, 2016 13 commits
-
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "22 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT radix-tree: fix oops after radix_tree_iter_retry MAINTAINERS: trim the file triggers for ABI/API dax: dirty inode only if required thp: make deferred_split_scan() work again mm: replace vma_lock_anon_vma with anon_vma_lock_read/write ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup um: asm/page.h: remove the pte_high member from struct pte_t mm, hugetlb: don't require CMA for runtime gigantic pages mm/hugetlb: fix gigantic page initialization/allocation mm: downgrade VM_BUG in isolate_lru_page() to warning mempolicy: do not try to queue pages from !vma_migratable() mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress vmstat: make vmstat_update deferrable mm, vmstat: make quiet_vmstat lighter mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT memblock: don't mark memblock_phys_mem_size() as __init dump_stack: avoid potential deadlocks mm: validate_mm browse_rb SMP race condition m32r: fix build failure due to SMP and MMU ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fixes from Sage Weil: "We have a few wire protocol compatibility fixes, ports of a few recent CRUSH mapping changes, and a couple error path fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: MOSDOpReply v7 encoding libceph: advertise support for TUNABLES5 crush: decode and initialize chooseleaf_stable crush: add chooseleaf_stable tunable crush: ensure take bucket value is valid crush: ensure bucket id is valid before indexing buckets array ceph: fix snap context leak in error path ceph: checking for IS_ERR instead of NULL
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Fixes all over the place: - amdkfd: two static checker fixes - mst: a bunch of static checker and spec/hw interaction fixes - amdgpu: fix Iceland hw properly, and some fiji bugs, along with some write-combining fixes. - exynos: some regression fixes - adv7511: fix some EDID reading issues" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (38 commits) drm/dp/mst: deallocate payload on port destruction drm/dp/mst: Reverse order of MST enable and clearing VC payload table. drm/dp/mst: move GUID storage from mgr, port to only mst branch drm/dp/mst: change MST detection scheme drm/dp/mst: Calculate MST PBN with 31.32 fixed point drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil drm/mst: Add range check for max_payloads during init drm/mst: Don't ignore the MST PBN self-test result drm: fix missing reference counting decrease drm/amdgpu: disable uvd and vce clockgating on Fiji drm/amdgpu: remove exp hardware support from iceland drm/amdgpu: load MEC ucode manually on iceland drm/amdgpu: don't load MEC2 on topaz drm/amdgpu: drop topaz support from gmc8 module drm/amdgpu: pull topaz gmc bits into gmc_v7 drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above drm/amdgpu: iceland use CI based MC IP drm/amdgpu: move gmc7 support out of CIK dependency drm/amdgpu/gfx7: enable cp inst/reg error interrupts drm/amdgpu/gfx8: enable cp inst/reg error interrupts ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management and ACPI fixes from Rafael Wysocki: "These are: a fix for a recently introduced false-positive warnings about PM domain pointers being changed inappropriately (harmless but annoying), an MCH size workaround quirk for one more platform, a compiler warning fix (generic power domains framework), an ACPI LPSS (Intel SoCs) driver fixup and a cleanup of the ACPI CPPC core code. Specifics: - PM core fix to avoid false-positive warnings generated when the pm_domain field is cleared for a device that appears to be bound to a driver (Rafael Wysocki). - New MCH size workaround quirk for Intel Haswell-ULT (Josh Boyer). - Fix for an "unused function" compiler warning in the generic power domains framework (Ulf Hansson). - Fixup for the ACPI driver for Intel SoCs (acpi-lpss) to set the PM domain pointer of a device properly in one place that was overlooked by a recent PM core update (Andy Shevchenko). - Removal of a redundant function declaration in the ACPI CPPC core code (Timur Tabi)" * tag 'pm+acpi-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: Avoid false-positive warnings in dev_pm_domain_set() PM / Domains: Silence compiler warning for an unused function ACPI / CPPC: remove redundant mbox_send_message() declaration ACPI / LPSS: set PM domain via helper setter PNP: Add Haswell-ULT to Intel MCH size workaround -
Jason Baron authored
In the current implementation of the EPOLLEXCLUSIVE flag (added for 4.5-rc1), if epoll waiters create different POLL* sets and register them as exclusive against the same target fd, the current implementation will stop waking any further waiters once it finds the first idle waiter. This means that waiters could miss wakeups in certain cases. For example, when we wake up a pipe for reading we do: wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if one epoll set or epfd is added to pipe p with POLLIN and a second set epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the wakeup since the current implementation will stop after it finds any intersection of events with a waiter that is blocked in epoll_wait(). We could potentially address this by requiring all epoll waiters that are added to p be required to pass the same set of POLL* events. IE the first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL* flags to be used by any other epfds that are added as EPOLLEXCLUSIVE. However, I think it might be somewhat confusing interface as we would have to reference count the number of users for that set, and so userspace would have to keep track of that count, or we would need a more involved interface. It also adds some shared state that we'd have store somewhere. I don't think anybody will want to bloat __wait_queue_head for this. I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE such that it can only be specified with EPOLLIN and/or EPOLLOUT. So that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop once we hit the first idle waiter that specifies the EPOLLIN bit, since any remaining waiters that only have 'POLLOUT' set wouldn't need to be woken. Likewise, we can do the same thing if 'POLLOUT' is in the wakeup bit set and not 'POLLIN'. If both 'POLLOUT' and 'POLLIN' are set in the wake bit set (there is at least one example of this I saw in fs/pipe.c), then we just wake the entire exclusive list. Having both 'POLLOUT' and 'POLLIN' both set should not be on any performance critical path, so I think that's ok (in fs/pipe.c its in pipe_release()). We also continue to include EPOLLERR and EPOLLHUP by default in any exclusive set. Thus, the user can specify EPOLLERR and/or EPOLLHUP but is not required to do so. Since epoll waiters may be interested in other events as well besides EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by doing a 'dup' call on the target fd and adding that as one normally would with EPOLL_CTL_ADD. Since I think that the POLLIN and POLLOUT events are what we are interest in balancing, I think that the 'dup' thing could perhaps be added to only one of the waiter threads. However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be sufficient for the majority of use-cases. Since EPOLLEXCLUSIVE is intended to be used with a target fd shared among multiple epfds, where between 1 and n of the epfds may receive an event, it does not satisfy the semantics of EPOLLONESHOT where only 1 epfd would get an event. Thus, it is not allowed to be specified in conjunction with EPOLLEXCLUSIVE. EPOLL_CTL_MOD is also not allowed if the fd was previously added as EPOLLEXCLUSIVE. It seems with the limited number of flags to not be as interesting, but this could be relaxed at some further point. Signed-off-by:
Jason Baron <jbaron@akamai.com> Tested-by:
Madars Vitolins <m@silodev.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Eric Wong <normalperson@yhbt.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Konstantin Khlebnikov authored
Helper radix_tree_iter_retry() resets next_index to the current index. In following radix_tree_next_slot current chunk size becomes zero. This isn't checked and it tries to dereference null pointer in slot. Tagged iterator is fine because retry happens only at slot 0 where tag bitmask in iter->tags is filled with single bit. Fixes: 46437f9a ("radix-tree: fix race in gang lookup") Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michael Kerrisk (man-pages) authored
Commit ea8f8fc8 ("MAINTAINERS: add linux-api for review of API/ABI changes") added file triggers for various paths that likely indicated API/ABI changes. However, catching all changes in Documentation/ABI/ and include/uapi/ produces a large volume of mail to linux-api, rather than only API/ABI changes. Drop those two entries, but leave include/linux/syscalls.h and kernel/sys_ni.c to catch syscall-related changes. [josh@joshtriplett.org: redid changelog] Signed-off-by:
Michael Kerrisk <mtk.man-pages@gmail.com> Acked-by:
Shuah khan <shuahkh@osg.samsung.com> Cc: Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Dmitry Monakhov authored
Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by:
-
Kirill A. Shutemov authored
We need to iterate over split_queue, not local empty list to get anything split from the shrinker. Fixes: e3ae1953 ("thp: limit number of object to scan on deferred_split_scan()") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Konstantin Khlebnikov authored
Sequence vma_lock_anon_vma() - vma_unlock_anon_vma() isn't safe if anon_vma appeared between lock and unlock. We have to check anon_vma first or call anon_vma_prepare() to be sure that it's here. There are only few users of these legacy helpers. Let's get rid of them. This patch fixes anon_vma lock imbalance in validate_mm(). Write lock isn't required here, read lock is enough. And reorders expand_downwards/expand_upwards: security_mmap_addr() and wrapping-around check don't have to be under anon vma lock. Link: https://lkml.kernel.org/r/CACT4Y+Y908EjM2z=706dv4rV6dWtxTLK9nFg9_7DhRMLppBo2g@mail.gmail.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
-
xuejiufei authored
When recovery master down, dlm_do_local_recovery_cleanup() only remove the $RECOVERY lock owned by dead node, but do not clear the refmap bit. Which will make umount thread falling in dead loop migrating $RECOVERY to the dead node. Signed-off-by:
xuejiufei <xuejiufei@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Nicolai Stange authored
Commit 16da3068 ("um: kill pfn_t") introduced a compile warning for defconfig (SUBARCH=i386): arch/um/kernel/skas/mmu.c:38:206: warning: right shift count >= width of type [-Wshift-count-overflow] Aforementioned patch changes the definition of the phys_to_pfn() macro from ((pfn_t) ((p) >> PAGE_SHIFT)) to ((p) >> PAGE_SHIFT) This effectively changes the phys_to_pfn() expansion's type from unsigned long long to unsigned long. Through the callchain init_stub_pte() => mk_pte(), the expansion of phys_to_pfn() is (indirectly) fed into the 'phys' argument of the pte_set_val(pte, phys, prot) macro, eventually leading to (pte).pte_high = (phys) >> 32; This results in the warning from above. Since UML only deals with 32 bit addresses, the upper 32 bits from 'phys' used to be always zero anyway. Also, all page protection flags defined by UML don't use any bits beyond bit 9. Since the contents of a PTE are defined within architecture scope only, the ->pte_high member can be safely removed. Remove the ->pte_high member from struct pte_t. Rename ->pte_low to ->pte. Adapt the pte helper macros in arch/um/include/asm/page.h. Noteworthy is the pte_copy() macro where a smp_wmb() gets dropped. This write barrier doesn't seem to be paired with any read barrier though and thus, was useless anyway. Fixes: 16da3068 ("um: kill pfn_t") Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Richard Weinberger <richard@nod.at> Cc: Nicolai Stange <nicstange@gmail.com> Signed-off-by:
-
Vlastimil Babka authored
Commit 944d9fec ("hugetlb: add support for gigantic page allocation at runtime") has added the runtime gigantic page allocation via alloc_contig_range(), making this support available only when CONFIG_CMA is enabled. Because it doesn't depend on MIGRATE_CMA pageblocks and the associated infrastructure, it is possible with few simple adjustments to require only CONFIG_MEMORY_ISOLATION instead of full CONFIG_CMA. After this patch, alloc_contig_range() and related functions are available and used for gigantic pages with just CONFIG_MEMORY_ISOLATION enabled. Note CONFIG_CMA selects CONFIG_MEMORY_ISOLATION. This allows supporting runtime gigantic pages without the CMA-specific checks in page allocator fastpaths. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
