- 04 Jul, 2024 1 commit
-
-
Marco Cavenati authored
topa_entry->base needs to store a pfn. It obviously needs to be large enough to store the largest possible x86 pfn which is MAXPHYADDR-PAGE_SIZE (52-12). So it is 4 bits too small. Increase the size of topa_entry->base from 36 bits to 40 bits. Note, systems where physical addresses can be 256TiB or more are affected. [ Adrian: Amend commit message as suggested by Dave Hansen ] Fixes: 52ca9ced ("perf/x86/intel/pt: Add Intel PT PMU driver") Signed-off-by:
Marco Cavenati <cavenati.marco@gmail.com> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
-
- 17 Jun, 2024 8 commits
-
-
Kan Liang authored
Unknown uncore PMON types can be found in both SPR and EMR with HBM or CXL. $ls /sys/devices/ | grep type uncore_type_12_16 uncore_type_12_18 uncore_type_12_2 uncore_type_12_4 uncore_type_12_6 uncore_type_12_8 uncore_type_13_17 uncore_type_13_19 uncore_type_13_3 uncore_type_13_5 uncore_type_13_7 uncore_type_13_9 The unknown PMON types are HBM and CXL PMON. Except for the name, the other information regarding the HBM and CXL PMON counters can be retrieved via the discovery table. Add them into the uncores tables for SPR and EMR. The event config registers for all CXL related units are 8-byte apart. Add SPR_UNCORE_MMIO_OFFS8_COMMON_FORMAT to specially handle it. Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Yunying Sun <yunying.sun@intel.com> Link: https://lore.kernel.org/r/20240614134631.1092359-9-kan.liang@linux.intel.com
-
Kan Liang authored
The unit control and ID information are retrieved from the unit control RB tree. No one uses the old structure anymore. Remove them. Signed-off-by:
-
Kan Liang authored
The unit control RB tree has the unit control and unit ID information for all the PCI units. Use them to replace the box_ctls/pci_offsets to get an accurate unit control address for PCI uncore units. The UPI/M3UPI units in the discovery table are ignored. Please see the commit 65248a9a ("perf/x86/uncore: Add a quirk for UPI on SPR"). Manually allocate a unit control RB tree for UPI/M3UPI. Add cleanup_extra_boxes to release such manual allocation. Signed-off-by:
-
Kan Liang authored
The unit control RB tree has the unit control and unit ID information for all the MSR units. Use them to replace the box_ctl and uncore_msr_box_ctl() to get an accurate unit control address for MSR uncore units. Add intel_generic_uncore_assign_hw_event(), which utilizes the accurate unit control address from the unit control RB tree to calculate the config_base and event_base. The unit id related information should be retrieved from the unit control RB tree as well. Signed-off-by:
-
Kan Liang authored
The unit control RB tree has the unit control and unit ID information for all the units. Use it to replace the box_ctls/mmio_offsets to get an accurate unit control address for MMIO uncore units. Signed-off-by:
-
Kan Liang authored
The box_ids only save the unit ID for the first die. If a unit, e.g., a CXL unit, doesn't exist in the first die. The unit ID cannot be retrieved. The unit control RB tree also stores the unit ID information. Retrieve the unit ID from the unit control RB tree Signed-off-by:
-
Kan Liang authored
The cpumask of some uncore units, e.g., CXL uncore units, may be wrong under some configurations. Perf may access an uncore counter of a non-existent uncore unit. The uncore driver assumes that all uncore units are symmetric among dies. A global cpumask is shared among all uncore PMUs. However, some CXL uncore units may only be available on some dies. A per PMU cpumask is introduced to track the CPU mask of this PMU. The driver searches the unit control RB tree to check whether the PMU is available on a given die, and updates the per PMU cpumask accordingly. Signed-off-by:
-
Kan Liang authored
The unit control address of some CXL units may be wrongly calculated under some configuration on a EMR machine. The current implementation only saves the unit control address of the units from the first die, and the first unit of the rest of dies. Perf assumed that the units from the other dies have the same offset as the first die. So the unit control address of the rest of the units can be calculated. However, the assumption is wrong, especially for the CXL units. Introduce an RB tree for each uncore type to save the unit control address and three kinds of ID information (unit ID, PMU ID, and die ID) for all units. The unit ID is a physical ID of a unit. The PMU ID is a logical ID assigned to a unit. The logical IDs start from 0 and must be contiguous. The physical ID and the logical ID are 1:1 mapping. The units with the same physical ID in different dies share the same PMU. The die ID indicates which die a unit belongs to. The RB tree can be searched by two different keys (unit ID or PMU ID + die ID). During the RB tree setup, the unit ID is used as a key to look up the RB tree. The perf can create/assign a proper PMU ID to the unit. Later, after the RB tree is setup, PMU ID + die ID is used as a key to look up the RB tree to fill the cpumask of a PMU. It's used more frequently, so PMU ID + die ID is compared in the unit_less(). The uncore_find_unit() has to be O(N). But the RB tree setup only occurs once during the driver load time. It should be acceptable. Compared with the current implementation, more space is required to save the information of all units. The extra size should be acceptable. For example, on EMR, there are 221 units at most. For a 2-socket machine, the extra space is ~6KB at most. Signed-off-by:
-
- 18 May, 2024 1 commit
-
-
Uros Bizjak authored
Replace this pattern in events/amd/{un,}core.c: cmpxchg(*ptr, old, new) == old ... with the simpler and faster: try_cmpxchg(*ptr, &old, new) The x86 CMPXCHG instruction returns success in the ZF flag, so this change saves a compare after the CMPXCHG. No functional change intended. Signed-off-by:Uros Bizjak <ubizjak@gmail.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20240425101708.5025-1-ubizjak@gmail.com
-
- 08 May, 2024 1 commit
-
-
Ingo Molnar authored
Use of this structure was removed in: 8f2a28c5 ("perf/x86/cstate: Use new probe function") Remove the now stale type as well. Signed-off-by:
-
- 02 May, 2024 11 commits
-
-
Dhananjay Ugwekar authored
AMD CPUs have the scope of RAPL energy-pkg event as package, whereas Intel Cascade Lake CPUs have the scope as die. To account for the difference in the energy-pkg event scope between AMD and Intel CPUs, give more generic and semantically correct names to the maxdie and dieid variables. No functional change. Signed-off-by:
Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com> Signed-off-by:
K Prateek Nayak <kprateek.nayak@amd.com> Link: https://lore.kernel.org/r/20240502095115.177713-2-Dhananjay.Ugwekar@amd.com
-
Ingo Molnar authored
We are going to fix perf-events fallout of changes in tip:x86/cpu, so merge in that branch first. Signed-off-by: -
Adrian Hunter authored
To support APX functionality, the EVEX prefix is used to: - promote legacy instructions - promote VEX instructions - add new instructions Promoted VEX instructions require no extra annotation because the opcodes do not change and the permissive nature of the instruction decoder already allows them to have an EVEX prefix. Promoted legacy instructions and new instructions are placed in map 4 which has not been used before. Create a new table for map 4 and add APX instructions. Annotate SCALABLE instructions with "(es)" - refer to patch "x86/insn: Add support for APX EVEX to the instruction decoder logic". SCALABLE instructions must be represented in both no-prefix (NP) and 66 prefix forms. Signed-off-by:
-
Adrian Hunter authored
Intel Advanced Performance Extensions (APX) extends the EVEX prefix to support: - extended general purpose registers (EGPRs) i.e. r16 to r31 - Push-Pop Acceleration (PPX) hints - new data destination (NDD) register - suppress status flags writes (NF) of common instructions - new instructions Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture Specification for details. The extended EVEX prefix does not need amended instruction decoder logic, except in one area. Some instructions are defined as SCALABLE which means the EVEX.W bit and EVEX.pp bits are used to determine operand size. Specifically, if an instruction is SCALABLE and EVEX.W is zero, then EVEX.pp value 0 (representing no prefix NP) means default operand size, whereas EVEX.pp value 1 (representing 66 prefix) means operand size override i.e. 16 bits Add an attribute (INAT_EVEX_SCALABLE) to identify such instructions, and amend the logic appropriately. Amend the awk script that generates the attribute tables from the opcode map, to recognise "(es)" as attribute INAT_EVEX_SCALABLE. Signed-off-by:
-
Adrian Hunter authored
Support for REX2 has been added to the instruction decoder logic and the awk script that generates the attribute tables from the opcode map. Add REX2 prefix byte (0xD5) to the opcode map. Add annotation (!REX2) for map 0/1 opcodes that are reserved under REX2. Add JMPABS to the opcode map and add annotation (REX2) to identify that it has a mandatory REX2 prefix. A separate opcode attribute table is not needed at this time because JMPABS has the same attribute encoding as the MOV instruction that it shares an opcode with i.e. INAT_MOFFSET. Signed-off-by:
-
Adrian Hunter authored
Intel Advanced Performance Extensions (APX) uses a new 2-byte prefix named REX2 to select extended general purpose registers (EGPRs) i.e. r16 to r31. The REX2 prefix is effectively an extended version of the REX prefix. REX2 and EVEX are also used with PUSH/POP instructions to provide a Push-Pop Acceleration (PPX) hint. With PPX hints, a CPU will attempt to fast-forward register data between matching PUSH and POP instructions. REX2 is valid only with opcodes in maps 0 and 1. Similar extension for other maps is provided by the EVEX prefix, covered in a separate patch. Some opcodes in maps 0 and 1 are reserved under REX2. One of these is used for a new 64-bit absolute direct jump instruction JMPABS. Refer to the Intel Advanced Performance Extensions (Intel APX) Architecture Specification for details. Define a code value for the REX2 prefix (INAT_PFX_REX2), and add attribute flags for opcodes reserved under REX2 (INAT_NO_REX2) and to identify opcodes (only JMPABS) that require a mandatory REX2 prefix (INAT_REX2_VARIANT). Amend logic to read the REX2 prefix and get the opcode attribute for the map number (0 or 1) encoded in the REX2 prefix. Amend the awk script that generates the attribute tables from the opcode map, to recognise "REX2" as attribute INAT_PFX_REX2, and "(!REX2)" as attribute INAT_NO_REX2, and "(REX2)" as attribute INAT_REX2_VARIANT. Signed-off-by:
-
Adrian Hunter authored
The x86 instruction decoder is used not only for decoding kernel instructions. It is also used by perf uprobes (user space probes) and by perf tools Intel Processor Trace decoding. Consequently, it needs to support instructions executed by user space also. Add instructions documented in Intel Architecture Instruction Set Extensions and Future Features Programming Reference March 2024 319433-052, that have not been added yet: AADD AAND AOR AXOR CMPccXADD PBNDKB RDMSRLIST URDMSR UWRMSR VBCSTNEBF162PS VBCSTNESH2PS VCVTNEEBF162PS VCVTNEEPH2PS VCVTNEOBF162PS VCVTNEOPH2PS VCVTNEPS2BF16 VPDPB[SU,UU,SS]D[,S] VPDPW[SU,US,UU]D[,S] VPMADD52HUQ VPMADD52LUQ VSHA512MSG1 VSHA512MSG2 VSHA512RNDS2 VSM3MSG1 VSM3MSG2 VSM3RNDS2 VSM4KEY4 VSM4RNDS4 WRMSRLIST TCMMIMFP16PS TCMMRLFP16PS TDPFP16PS PREFETCHIT1 PREFETCHIT0 Signed-off-by:
-
Adrian Hunter authored
The x86 instruction decoder is used not only for decoding kernel instructions. It is also used by perf uprobes (user space probes) and by perf tools Intel Processor Trace decoding. Consequently, it needs to support instructions executed by user space also. Intel Architecture Instruction Set Extensions and Future Features manual number 319433-044 of May 2021, documented VEX versions of instructions VPDPBUSD, VPDPBUSDS, VPDPWSSD and VPDPWSSDS, but the opcode map has them listed as EVEX only. Remove EVEX-only (ev) annotation from instructions VPDPBUSD, VPDPBUSDS, VPDPWSSD and VPDPWSSDS, which allows them to be decoded with either a VEX or EVEX prefix. Fixes: 0153d98f ("x86/insn: Add misc instructions to x86 instruction decoder") Signed-off-by:
-
Adrian Hunter authored
The x86 instruction decoder is used not only for decoding kernel instructions. It is also used by perf uprobes (user space probes) and by perf tools Intel Processor Trace decoding. Consequently, it needs to support instructions executed by user space also. Opcode 0x68 PUSH instruction is currently defined as 64-bit operand size only i.e. (d64). That was based on Intel SDM Opcode Map. However that is contradicted by the Instruction Set Reference section for PUSH in the same manual. Remove 64-bit operand size only annotation from opcode 0x68 PUSH instruction. Example: $ cat pushw.s .global _start .text _start: pushw $0x1234 mov $0x1,%eax # system call number (sys_exit) int $0x80 $ as -o pushw.o pushw.s $ ld -s -o pushw pushw.o $ objdump -d pushw | tail -4 0000000000401000 <.text>: 401000: 66 68 34 12 pushw $0x1234 401004: b8 01 00 00 00 mov $0x1,%eax 401009: cd 80 int $0x80 $ perf record -e intel_pt//u ./pushw [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data ] Before: $ perf script --insn-trace=disasm Warning: 1 instruction trace errors pushw 10349 [000] 10586.869237014: 401000 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) pushw $0x1234 pushw 10349 [000] 10586.869237014: 401006 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb %al, (%rax) pushw 10349 [000] 10586.869237014: 401008 [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb %cl, %ch pushw 10349 [000] 10586.869237014: 40100a [unknown] (/home/ahunter/git/misc/rtit-tests/pushw) addb $0x2e, (%rax) instruction trace error type 1 time 10586.869237224 cpu 0 pid 10349 tid 10349 ip 0x40100d code 6: Trace doesn't match instruction After: $ perf script --insn-trace=disasm pushw 10349 [000] 10586.869237014: 401000 [unknown] (./pushw) pushw $0x1234 pushw 10349 [000] 10586.869237014: 401004 [unknown] (./pushw) movl $1, %eax Fixes: eb13296c ("x86: Instruction decoder API") Signed-off-by: -
Chang S. Bae authored
The x86 instruction decoder needs to know these new instructions that are going to be used in the crypto library as well as the x86 core code. Add the following: LOADIWKEY: Load a CPU-internal wrapping key. ENCODEKEY128: Wrap a 128-bit AES key to a key handle. ENCODEKEY256: Wrap a 256-bit AES key to a key handle. AESENC128KL: Encrypt a 128-bit block of data using a 128-bit AES key indicated by a key handle. AESENC256KL: Encrypt a 128-bit block of data using a 256-bit AES key indicated by a key handle. AESDEC128KL: Decrypt a 128-bit block of data using a 128-bit AES key indicated by a key handle. AESDEC256KL: Decrypt a 128-bit block of data using a 256-bit AES key indicated by a key handle. AESENCWIDE128KL: Encrypt 8 128-bit blocks of data using a 128-bit AES key indicated by a key handle. AESENCWIDE256KL: Encrypt 8 128-bit blocks of data using a 256-bit AES key indicated by a key handle. AESDECWIDE128KL: Decrypt 8 128-bit blocks of data using a 128-bit AES key indicated by a key handle. AESDECWIDE256KL: Decrypt 8 128-bit blocks of data using a 256-bit AES key indicated by a key handle. The detail can be found in Intel Software Developer Manual. Signed-off-by:
Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20240502105853.5338-2-adrian.hunter@intel.com
-
Ingo Molnar authored
Signed-off-by:
-
- 29 Apr, 2024 13 commits
-
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. [ dhansen: vertically align 0's in invlpg_miss_ids[] ] Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/all/20240424181518.41946-1-tony.luck%40intel.com
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. [ dhansen: vertically align macro and remove stray subject / ] Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. [ bp: Squash two resctrl patches into one. ] Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. [ bp: Squash *three* mce patches into one, fold in fix: https://lore.kernel.org/r/20240429022051.63360-1-tony.luck@intel.com ] Signed-off-by: -
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. Signed-off-by:
-
Tony Luck authored
New CPU #defines encode vendor and family as well as model. [ bp: Squash *three* uncore patches into one. ] Signed-off-by:
-
- 28 Apr, 2024 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: - Fix EEVDF corner cases - Fix two nohz_full= related bugs that can cause boot crashes and warnings * tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU sched/isolation: Prevent boot crash when the boot CPU is nohz_full sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf() sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr sched/eevdf: Always update V if se->on_rq when reweighting
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: - Make the CPU_MITIGATIONS=n interaction with conflicting mitigation-enabling boot parameters a bit saner. - Re-enable CPU mitigations by default on non-x86 - Fix TDX shared bit propagation on mprotect() - Fix potential show_regs() system hang when PKE initialization is not fully finished yet. - Add the 0x10-0x1f model IDs to the Zen5 range - Harden #VC instruction emulation some more * tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n cpu: Re-enable CPU mitigations by default for !X86 architectures x86/tdx: Preserve shared bit on mprotect() x86/cpu: Fix check for RDPKRU in __show_regs() x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Ingo Molnar: "Fix a double free bug in the init error path of the GICv3 irqchip driver" * tag 'irq-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Prevent double free on error
-
Oleg Nesterov authored
housekeeping_setup() checks cpumask_intersects(present, online) to ensure that the kernel will have at least one housekeeping CPU after smp_init(), but this doesn't work if the maxcpus= kernel parameter limits the number of processors available after bootup. For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at boot time on a virtual machine with 4 CPUs. Change housekeeping_setup() to use cpumask_first_and() and check that the returned CPU number is valid and less than setup_max_cpus. Another corner case is "nohz_full=0" on a machine with a single CPU or with the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the WARN_ON(tick_nohz_full_running) in tick_sched_do_timer(). And how should the kernel interpret the "nohz_full=" parameter? It should be silently ignored, but currently cpulist_parse() happily returns the empty cpumask and this leads to the same problem. Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask) and do nothing in this case. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Phil Auld <pauld@redhat.com> Acked-by:
Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com
-
