- 22 Mar, 2017 2 commits
-
-
Ville Syrjälä authored
framebuffer_check() has some hand rolled code to compute the color plane dimensions based on the subsampled information. Let's share the code between framebuffer_check() and drm_framebuffer_plane_{width,height}(). Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-2-ville.syrjala@linux.intel.comReviewed-by:
Ben Widawsky <ben@bwidawsk.net>
-
Shawn Guo authored
There is a leftover 'inf' field in struct zx_hdmi from commit '831a8d5e ("drm: zte: move struct vou_inf into zx_vou driver")'. Remove it. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1490086795-17925-1-git-send-email-shawnguo@kernel.org
-
- 21 Mar, 2017 6 commits
-
-
Shashank Sharma authored
This patch does following: - Adds a new structure (drm_hdmi_info) in drm_display_info. This structure will be used to save and indicate if sink supports advanced HDMI 2.0 features - Adds another structure drm_scdc within drm_hdmi_info, to reflect scdc support and capabilities in connected HDMI 2.0 sink. - Checks the HF-VSDB block for presence of SCDC, and marks it in scdc structure - If SCDC is present, checks if sink is capable of generating SCDC read request, and marks it in scdc structure. V2: Addressed review comments Thierry: - Fix typos in commit message and make abbreviation consistent across the commit message. - Change structure object name from hdmi_info -> hdmi - Fix typos and abbreviations in description of structure drm_hdmi_info end the description with a full stop. - Create a structure drm_scdc, and keep all information related to SCDC register set (supported, read request supported) etc in it. Ville: - Change rr -> read_request - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all of HF-VSDB parsing can be kept in same function, in incremental patches. V3: Rebase. V4: Rebase. V5: Rebase. V6: Addressed review comments from Ville - Add clock rate calculations for 1/10 and 1/40 ratios - Remove leftovers from old patchset V7: Added R-B from Jose. V8: Rebase. V9: Rebase. V10: Rebase. Signed-off-by:Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
-
Shashank Sharma authored
This patch does following: - Adds a new structure (drm_hdmi_info) in drm_display_info. This structure will be used to save and indicate if sink supports advanced HDMI 2.0 features - Adds another structure drm_scdc within drm_hdmi_info, to reflect scdc support and capabilities in connected HDMI 2.0 sink. - Checks the HF-VSDB block for presence of SCDC, and marks it in scdc structure - If SCDC is present, checks if sink is capable of generating SCDC read request, and marks it in scdc structure. V2: Addressed review comments Thierry: - Fix typos in commit message and make abbreviation consistent across the commit message. - Change structure object name from hdmi_info -> hdmi - Fix typos and abbreviations in description of structure drm_hdmi_info end the description with a full stop. - Create a structure drm_scdc, and keep all information related to SCDC register set (supported, read request supported) etc in it. Ville: - Change rr -> read_request - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all of HF-VSDB parsing can be kept in same function, in incremental patches. V3: Rebase. V4: Rebase. V5: Rebase. V6: Rebase. V7: Added R-B from Jose. V8: Rebase. V9: Rebase. V10: Rebase. Signed-off-by:
-
Thierry Reding authored
This patch implements a small function that finds if a given CEA db is hdmi-forum vendor specific data block or not. V2: Rebase. V3: Added R-B from Jose. V4: Rebase V5: Rebase V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Signed-off-by:
-
Thierry Reding authored
SCDC is a mechanism defined in the HDMI 2.0 specification that allows the source and sink devices to communicate. This commit introduces helpers to access the SCDC and provides the symbolic names for the various registers defined in the specification. V2: Rebase. V3: Added R-B from Jose. V4: Rebase V5: Addressed review comments from Ville - Handle the I2c return values in a better way (dp_dual_mode) - Make the macros for SCDC Major/Minor more readable, by adding a 'GET' in the macro names V6: Rebase V7: Rebase V8: Rebase V9: Rebase V10: Rebase Signed-off-by:
-
Nickey Yang authored
Vendor specific infoframe is mandatory for 4K2K resolution. Without this, the HDMI protocol compliance fails. Signed-off-by:
Nickey Yang <nickey.yang@rock-chips.com> Reviewed-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1490081777-2232-1-git-send-email-nickey.yang@rock-chips.com
-
Nickey Yang authored
"I2C Master Interface Extended Read Mode" implements a segment pointer-based read operation using the Special Register configuration. This patch fix https://patchwork.kernel.org/patch/7098101/ mentioned "The current implementation does not support "I2C Master Interface Extended Read Mode" to read data addressed by non-zero segment pointer, this means that if EDID has more than 1 extension blocks, EDID reading operation won't succeed" With this patch, dw-hdmi can read EDID data with 1/2/4 blocks. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by:
-
- 20 Mar, 2017 2 commits
-
-
Arnd Bergmann authored
We now call those two functions even when they are not defined or declared anywhere because DEBUG_FS is disabled: drivers/gpu/drm/msm/msm_drv.c: In function 'msm_drm_uninit': drivers/gpu/drm/msm/msm_drv.c:244:2: error: implicit declaration of function 'msm_perf_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration] drivers/gpu/drm/msm/msm_drv.c:245:2: error: implicit declaration of function 'msm_rd_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration] This adds empty stub implementations for that case. Fixes: 85eac470 ("drm/msm: Remove msm_debugfs_cleanup()") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170320093936.1255573-1-arnd@arndb.de
-
Gabriel Krisman Bertazi authored
In the same spirit of the fix for QXL in commit 86107838 ("drm: qxl: Don't alloc fbdev if emulation is not supported"), prevent the Oops in the unbind path of Bochs if fbdev emulation is disabled. [ 112.176009] Oops: 0002 [#1] SMP [ 112.176009] Modules linked in: bochs_drm [ 112.176009] CPU: 0 PID: 3002 Comm: bash Not tainted 4.11.0-rc1+ #111 [ 112.176009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 112.176009] task: ffff8800743bbac0 task.stack: ffffc90000b5c000 [ 112.176009] RIP: 0010:mutex_lock+0x18/0x30 [ 112.176009] RSP: 0018:ffffc90000b5fc78 EFLAGS: 00010246 [ 112.176009] RAX: 0000000000000000 RBX: 0000000000000260 RCX: 0000000000000000 [ 112.176009] RDX: ffff8800743bbac0 RSI: ffff8800787176e0 RDI: 0000000000000260 [ 112.176009] RBP: ffffc90000b5fc80 R08: ffffffff00000000 R09: 00000000ffffffff [ 112.176009] R10: ffff88007b463650 R11: 0000000000000000 R12: 0000000000000260 [ 112.176009] R13: ffff8800787176e0 R14: ffffffffa0003068 R15: 0000000000000060 [ 112.176009] FS: 00007f20564c7b40(0000) GS:ffff88007ce00000(0000) knlGS:0000000000000000 [ 112.176009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 112.176009] CR2: 0000000000000260 CR3: 000000006b89c000 CR4: 00000000000006f0 [ 112.176009] Call Trace: [ 112.176009] drm_mode_object_unregister+0x1e/0x50 [ 112.176009] drm_framebuffer_unregister_private+0x15/0x20 [ 112.176009] bochs_fbdev_fini+0x57/0x70 [bochs_drm] [ 112.176009] bochs_unload+0x16/0x50 [bochs_drm] [ 112.176009] drm_dev_unregister+0x37/0xd0 [ 112.176009] drm_put_dev+0x31/0x60 [ 112.176009] bochs_pci_remove+0x10/0x20 [bochs_drm] [ 112.176009] pci_device_remove+0x34/0xb0 [ 112.176009] device_release_driver_internal+0x150/0x200 [ 112.176009] device_release_driver+0xd/0x10 [ 112.176009] unbind_store+0x108/0x150 [ 112.176009] drv_attr_store+0x20/0x30 [ 112.176009] sysfs_kf_write+0x32/0x40 [ 112.176009] kernfs_fop_write+0x10b/0x190 [ 112.176009] __vfs_write+0x23/0x120 [ 112.176009] ? security_file_permission+0x36/0xb0 [ 112.176009] ? rw_verify_area+0x49/0xb0 [ 112.176009] vfs_write+0xb0/0x190 [ 112.176009] SyS_write+0x41/0xa0 [ 112.176009] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 112.176009] RIP: 0033:0x7f2055bd5620 [ 112.176009] RSP: 002b:00007ffed2f487d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 112.176009] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2055bd5620 [ 112.176009] RDX: 000000000000000d RSI: 0000000000ee0008 RDI: 0000000000000001 [ 112.176009] RBP: 0000000000000001 R08: 00007f2055e94760 R09: 00007f20564c7b40 [ 112.176009] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000000 [ 112.176009] R13: 00007ffed2f48d70 R14: 0000000000000000 R15: 0000000000000000 [ 112.176009] Code: 00 00 00 55 be 02 00 00 00 48 89 e5 e8 62 fb ff ff 5d c3 55 48 89 e5 53 48 89 fb e8 53 e9 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <f0> 48 0f b1 13 48 85 c0 74 08 48 89 df e8c6 ff ff ff 5b 5d c3 [ 112.176009] RIP: mutex_lock+0x18/0x30 RSP: ffffc90000b5fc78 [ 112.176009] CR2: 0000000000000260 [ 112.205622] ---[ end trace 76189cd7a9bdd155 ]--- Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170317181409.4183-1-krisman@collabora.co.ukSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
- 17 Mar, 2017 3 commits
-
-
Colin Ian King authored
The pointer plane is always null on the error path at label 'fail' hence the check if it is non-null is redundant. We can therefore remove the check and the destruction of plane as well as the fail error path and instead just return an -ENOMEM ERR_PTR. Detected by CoverityScan, CID#1339532 ("Logically Dead Code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170316185418.32765-1-colin.king@canonical.com
-
Philipp Zabel authored
Use platform_register_drivers instead of open coding the iteration over component platform drivers in the vc4_drv module. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
-
Philipp Zabel authored
Add a helper to check if all fences in a fence array are from a given context. For convenience, the function can also handle being given a non-array fence. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Acked-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
- 16 Mar, 2017 5 commits
-
-
Eric Anholt authored
The HDMI encoder IP embeds all needed blocks to output audio, with a custom DAI called MAI moving audio between the two parts of the HDMI core. This driver now exposes a sound card to let users stream audio to their display. Using the hdmi-codec driver has been considered here, but MAI meant having to significantly rework hdmi-codec, and it would have left little shared code with the I2S mode anyway. The encoder requires that the audio be SPDIF-formatted frames only, which alsalib will format-convert for us. This patch is the combined work of Eric Anholt (initial register setup with a separate dmaengine driver and using simple-audio-card) and Boris Brezillon (moving it all into HDMI, massive debug to get it actually working), and which Eric has the permission to release. v2: Drop "-audio" from sound card name, since that's already implied (suggestion by Boris) Signed-off-by:Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170227202803.12855-2-eric@anholt.net
-
Boris Brezillon authored
These are optional, but necessary for HDMI audio support. Signed-off-by:
Rob Herring <robh@kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170227202803.12855-1-eric@anholt.net
-
Boris Brezillon authored
The current suspend resume implementation is assuming register values are kept when entering suspend, which is no longer the case with the suspend-to-RAM on the sama5d2. While at it, switch to the generic infrastructure to enter suspend mode (drm_atomic_helper_suspend/resume()). Signed-off-by:
Sylvain Rochet <sylvain.rochet@finsecur.com> Link: http://patchwork.freedesktop.org/patch/msgid/1488371461-22243-1-git-send-email-boris.brezillon@free-electrons.com
-
Chris Wilson authored
Avoid adding to the waitqueue and reprobing the current vblank if the caller is only querying the current vblank sequence and timestamp, where we know that the wait would return immediately. v2: Add CRTC identifier to debug messages Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Michel Dänzer <michel@daenzer.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Dave Airlie <airlied@redhat.com>, Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by:
Michel Dänzer <michel@daenzer.net> Reviewed-and-tested-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by:
-
Chris Wilson authored
On vblank instant-off systems, we can get into a situation where the cost of enabling and disabling the vblank IRQ around a drmWaitVblank query dominates. And with the advent of even deeper hardware sleep state, touching registers becomes ever more expensive. However, we know that if the user wants the current vblank counter, they are also very likely to immediately queue a vblank wait and so we can keep the interrupt around and only turn it off if we have no further vblank requests queued within the interrupt interval. After vblank event delivery, this patch adds a shadow of one vblank where the interrupt is kept alive for the user to query and queue another vblank event. Similarly, if the user is using blocking drmWaitVblanks, the interrupt will be disabled on the IRQ following the wait completion. However, if the user is simply querying the current vblank counter and timestamp, the interrupt will be disabled after every IRQ and the user will enabled it again on the first query following the IRQ. v2: Mario Kleiner - After testing this, one more thing that would make sense is to move the disable block at the end of drm_handle_vblank() instead of at the top. Turns out that if high precision timestaming is disabled or doesn't work for some reason (as can be simulated by echo 0 > /sys/module/drm/parameters/timestamp_precision_usec), then with your delayed disable code at its current place, the vblank counter won't increment anymore at all for instant queries, ie. with your other "instant query" patches. Clients which repeatedly query the counter and wait for it to progress will simply hang, spinning in an endless query loop. There's that comment in vblank_disable_and_save: "* Skip this step if there isn't any high precision timestamp * available. In that case we can't account for this and just * hope for the best. */ With the disable happening after leading edge of vblank (== hw counter increment already happened) but before the vblank counter/timestamp handling in drm_handle_vblank, that step is needed to keep the counter progressing, so skipping it is bad. Now without high precision timestamping support, a kms driver must not set dev->vblank_disable_immediate = true, as this would cause problems for clients, so this shouldn't matter, but it would be good to still make this robust against a future kms driver which might have unreliable high precision timestamping, e.g., high precision timestamping that intermittently doesn't work. v3: Patch before coffee needs extra coffee. Testcase: igt/kms_vblank Signed-off-by:
-
- 14 Mar, 2017 13 commits
-
-
Daniel Vetter authored
I want to split up a few more things and document some details better (like how exactly to subclass drm_atomic_state). And maybe also split up the helpers a bit per-topic, but this should be a ok-ish start for better atomic overview. v2: Spelling and clarifications (Eric). v3: Implement suggestion from Gabriel to fix the graph. v4: Review from Laurent. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Acked-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170302151638.1882-6-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Resulted in confusion a few times in the past. v2: Spelling fix (Eric). Cc: Eric Anholt <eric@anholt.net> Acked-by:
-
Daniel Vetter authored
First overview text (if there is any), then headers (since generally you want to start out with the data structures), then all the other stuff with functions. Most of this is pre-shpinx, since with the old docbook only the overview stuff was pulled in directly. Everything else was put in a per-section index, so include order didn't really matter. Acked-by:
-
Daniel Vetter authored
Oh, the shiny and pretties! v2: Review from Laurent. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
-
git://git.lwn.net/linuxDaniel Vetter authored
Pointer for Markus's image conversion work. We need this so we can merge all the pretty drm graphs for 4.12. Signed-off-by: -
Daniel Vetter authored
Sadly there's only 1 driver which can use it, everyone else is special for some reason: - gma500 has a horrible runtime PM ioctl wrapper that probably doesn't really work but meh. - i915 needs special compat_ioctl handler because regrets. - arcgpu needs to fixup the pgprot because (no idea why it can't do that in the fault handler like everyone else). - tegra does even worse stuff with pgprot - udl does something with vm_flags too ... - cma helpers, etnaviv, mtk, msm, rockchip, omap all implement some variation on prefaulting. - exynos is exynos, I got lost in the midlayers. - vc4 has to reinvent half of cma helpers because those are too much midlayer, plus vm_flags dances. - vgem also seems unhappy with the default vm_flags. So pretty sad divergence and I'm sure we could do better, but not really an idea. Oh well, maybe this macro here helps to encourage more consistency at least going forward. Reviewed-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
-
Daniel Vetter authored
Less code ftw. This converts all drivers except the tinydrm helper module. That one needs more work, since it gets the THIS_MODULE reference from tinydrm.ko instead of the actual driver module like it should. Probably needs a similar trick like I used here with generating the entire struct with a macro. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
-
Daniel Vetter authored
I didn't spot anything that would require ordering here (well not anywhere else either), and I'm trying to unify at least modern drivers on one close hook. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Daniel Vetter authored
Well, mostly drm_file.h, and clean up all related things: - I didnt' figure out the difference between preclose and postclose. The existing explanation in drm-internals.rst didn't convince me, since it's also really outdated - we clean up pending DRM events in the core nowadays. I put a FIXME in for the future. - Another FIXME is to have a macro for default fops. - Lots of links all around, main areas are to tie the overview in drm_file.c more into the callbacks in struct drm_device, and the other is to link render/primary node code to the right sections in drm-uapi.rst. - Also moved the open/close stuff to drm_drv.h from drm-internals.rst, seems like the better place for that information. Since that section was rather outdated this amounted to full-on rewrite. A big missing piece here is some overview graph, but I think better to wait with that one until drm_device and drm_driver are also fully documented. v2: Nits from Sean. Reviewed-by:
-
Daniel Vetter authored
We might as well dump the drm_file pointer, that's about as useful a cookie as the pid. Noticed while typing docs for drm_file and friends. Since the only consumer of this is the tracepoints I think we can safely change this - those tracepoints should not be uapi relevant at all. It all goes back to commit b9c2c9ae Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Jul 1 16:48:09 2010 -0700 drm: add per-event vblank event trace points which doesn't give a special justification for using pid over a pointer. Also note that the nouveau code setting it is entirely pointless: Since this isn't a vblank event, it will never hit the vblank tracepoints. Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
-
Dan Carpenter authored
My static checker complains that "release" is uninitialized if qxl_alloc_release_reserved() fails, so let's add a check for that. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170314075410.GB5984@mwandaSigned-off-by:
-
Gerd Hoffmann authored
kmem_cache_alloc returns NULL on error, not ERR_PTR. Fixes: f5985bf9Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
kbuild test robot authored
drivers/gpu/drm/tinydrm/mipi-dbi.c:657:2-3: Unneeded semicolon drivers/gpu/drm/tinydrm/mipi-dbi.c:593:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
- 13 Mar, 2017 3 commits
-
-
Chris Zhong authored
In order to analyze some video config failed, add some useful printouts. Signed-off-by:
Chris Zhong <zyw@rock-chips.com> Signed-off-by:
-
Chris Zhong authored
Correct some DP register address for PHY Configuration according to latest datasheet. Signed-off-by:
-
Chris Zhong authored
The clk_get_rate return 0 if something goes wrong, so it can never be less then zero, the ret should be set a error code, otherwise the cdn_dp_clk_enable will return 0 when it failed at clk_get_rate. In addition, clk_get_rate() returns an "unsigned long", so use "unsigned long" instead of "u32" is better. Signed-off-by:
-
- 11 Mar, 2017 1 commit
-
-
git://linuxtv.org/pinchartl/mediaDaniel Vetter authored
Merge Laurent's drm_platform removal code. Only conflict is with the drm_pci.h extraction, which allows me to fix up the misplayed drm_platform_init fumble that 0day and Stephen Rothwell reported. Signed-off-by:
-
- 10 Mar, 2017 5 commits
-
-
Laurent Pinchart authored
The driver is already made of 5 separate source files. Move it to a newly created directory named synopsys where more Synopsys bridge drivers can be added later (for the DisplayPort controller for instance). Suggested-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
-
Neil Armstrong authored
The Synopsys Designware HDMI TX Controller does not enforce register access on platforms instanciating it. The current driver supports two different types of memory-mapped flat register access, but in order to support the Amlogic Meson SoCs integration, and provide a more generic way to handle all sorts of register mapping, switch the register access to use the regmap infrastructure. In the case of registers that are not flat memory-mapped or do not conform to the current driver implementation, a regmap struct can be given in the plat_data and be used at probe or bind. Since the AHB audio driver is only available with direct memory access, only allow the I2S audio driver to be registered is directly memory-mapped. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
-
Kieran Bingham authored
The device type isn't used anymore now that workarounds and PHY-specific operations are performed based on version information read at runtime. Remove it. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Kieran Bingham authored
The DWC HDMI TX controller interfaces with a companion PHY. While Synopsys provides multiple standard PHYs, SoC vendors can also integrate a custom PHY. Modularize PHY configuration to support vendor PHYs through platform data. The existing PHY configuration code was originally written to support the DWC HDMI 3D TX PHY, and seems to be compatible with the DWC MLP PHY. The HDMI 2.0 PHY will require a separate configuration function. Signed-off-by:
-
Laurent Pinchart authored
The HDMI TX controller support different PHYs whose programming interface can vary significantly, especially with vendor PHYs that are not provided by Synopsys. To support them, create a PHY operation structure that can be provided by the platform glue layer. The existing PHY handling code (limited to Synopsys PHY support) is refactored into a set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Signed-off-by:
-
