- 01 Oct, 2012 1 commit
-
-
Bruno Prémont authored
Matthieu CASTET adjusted picolcd_debug_out_report() to only operate when there is an active listener on debugfs for events. His change got lost while splitting hid_picolcd.c, restore it. Signed-off-by:
Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
- 24 Sep, 2012 1 commit
-
-
Bruno Prémont authored
Make sure we keep enough space for terminating NUL character after last newline. If we have too much data, replace last byte with '.'s to make overflow visible. Using hex_dump_to_buffer() is not interesting as it adds more overhead and does not append the trailing linefeed. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 19 Sep, 2012 2 commits
-
-
Axel Lin authored
Current implementation of hid_hw_start() allows connect_mask to be 0. Setting hdev->claimed = HID_CLAIMED_INPUT before calling hid_hw_start() is not necessary. Remove it. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-By:
-
Bruno Prémont authored
Commit 4ea54542 [HID: Fix race condition between driver core and ll-driver] introduced new locking around probe/remove functions that prevents any report/reply from hardware to reach driver until it returned from probe. As such, the ask-reply way to checking picoLCD firmware version during probe is bound to timeout and let probe fail. Drop the check to let driver successfully probe again (until locking issues are resolved allowing to reinstate the check). Signed-off-by:
-
- 11 Sep, 2012 1 commit
-
-
Axel Lin authored
Current code missed the definition for picolcd_debug_out_report, but add definition for picolcd_debug_raw_event twice. This patch fixes below build error: CC [M] drivers/hid/hid-picolcd_core.o In file included from drivers/hid/hid-picolcd_core.c:34:0: drivers/hid/hid-picolcd.h:176:20: error: redefinition of 'picolcd_debug_raw_event' drivers/hid/hid-picolcd.h:162:20: note: previous definition of 'picolcd_debug_raw_event' was here make[2]: *** [drivers/hid/hid-picolcd_core.o] Error 1 make[1]: *** [drivers/hid] Error 2 make: *** [drivers] Error 2 if CONFIG_DEBUG_FS is unset. Signed-off-by:
-
- 08 Sep, 2012 1 commit
-
-
Dan Carpenter authored
Smatch complains that the NULL checking in this function is not consistent and could lead to a NULL dereference. The comments say that we should return here if rc_dev is NULL so I've changed the test to match the comment. Signed-off-by:
-
- 05 Sep, 2012 6 commits
-
-
Bruno Prémont authored
Signed-off-by:
-
Bruno Prémont authored
The first payload byte indicates how many IR data bytes are following, not including itself. The IR data bytes appear in pairs as they represent a series of 16bit intervals. Signed-off-by:
-
Bruno Prémont authored
Matthieu CASTET adjusted picolcd_debug_out_report() to only operate when there is an active listener on debugfs for events. Do the same on the more important picolcd_debug_raw_event() that is called in interrupt context as opposed to picolcd_debug_out_report() which happens in whichever context that sends reports to device. Signed-off-by:
-
Bruno Prémont authored
Implement support for picoLCD's CIR header using RC_CORE for decoding the IR event stream. Signed-off-by:
-
Bruno Prémont authored
Split out all FB related data out of struct picolcd_data into a struct picolcd_fb_data that is allocated with fb_info. This way fb_info may cleanly outlive struct picolcd_data for as long as needed for its last user to drop his reference. Access to struct picolcd_data is now protected with struct picolcd_fb_data's lock and tile update reports are only generated while picolcd_fbdata->picolcd is not NULL and is not marked as failed (which indicates unplug in progress). Signed-off-by:
-
Bruno Prémont authored
Driver code expects to get access to struct picolcd_data from hiddev and is not prepared to find a NULL pointer there. Most prominent candidate to trip on it is picolcd_fb_deferred_io(). Delay removing struct picolcd_data from hiddev until all sub-devices have been unregistered. Signed-off-by:
-
- 22 Aug, 2012 1 commit
-
-
Geert Uytterhoeven authored
m68k/allmodconfig: drivers/hid/hid-picolcd_debugfs.c: In function ‘picolcd_debug_reset_write’: drivers/hid/hid-picolcd_debugfs.c:54: error: implicit declaration of function ‘copy_from_user’ drivers/hid/hid-picolcd_debugfs.c: In function ‘picolcd_debug_eeprom_read’: drivers/hid/hid-picolcd_debugfs.c:112: error: implicit declaration of function ‘copy_to_user’ Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
- 16 Aug, 2012 1 commit
-
-
Stephen Rothwell authored
Fixes thes build errors: drivers/hid/hid-picolcd_fb.c: In function 'picolcd_fb_destroy': drivers/hid/hid-picolcd_fb.c:350:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] drivers/hid/hid-picolcd_fb.c: In function 'picolcd_init_framebuffer': drivers/hid/hid-picolcd_fb.c:508:2: error: implicit declaration of function 'vmalloc' [-Werror=implicit-function-declaration] drivers/hid/hid-picolcd_fb.c:508:12: warning: assignment makes pointer from integer without a cast [enabled by default] Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 15 Aug, 2012 6 commits
-
-
Bruno Prémont authored
Signed-off-by:
-
Bruno Prémont authored
Stop earlier attempting to submit new reports/URBs (though locking and usbhid still prevents to bail out early enough to not produce multiple hid-picolcd 0003:04D8:C002.0003: usb_submit_urb(out) failed: -19 messages in kernel log. Strengthen framebuffer removal to be less racy. Signed-off-by:
-
Bruno Prémont authored
WARNING: static const char * array should probably be static const char * const +static const char *error_codes[] = { WARNING: min() should probably be min_t(size_t, 20, s) + raw_data[2] = min((size_t)20, s); Note: the second min_t suggestion cannot be followed because GCC is not smart enough to track constants through it and make copy_from_user_overflow() check happy. WARNING: min() should probably be min_t(u8, 20, raw_data[2]) + if (copy_from_user(raw_data+3, u, min((u8)20, raw_data[2]))) return -EFAULT; Signed-off-by: -
Bruno Prémont authored
[ 679.807480] BUG: unable to handle kernel NULL pointer dereference at 00000074 [ 679.814457] IP: [<de93b5bf>] picolcd_led_set_brightness+0x1f/0xb0 [hid_picolcd] [ 679.814457] *pde = 00000000 [ 679.814457] Oops: 0000 [#1] [ 679.814457] Modules linked in: hid_picolcd fb_sys_fops sysimgblt sysfillrect syscopyarea drm_kms_helper nfs lockd nfs_acl sunrpc [last unloaded: hid_picolcd] [ 679.814457] [ 679.814457] Pid: 272, comm: khubd Not tainted 3.5.0-jupiter-00006-g463a4c0 #1 NVIDIA Corporation. nFORCE-MCP/MS-6373 [ 679.814457] EIP: 0060:[<de93b5bf>] EFLAGS: 00010246 CPU: 0 [ 679.814457] EIP is at picolcd_led_set_brightness+0x1f/0xb0 [hid_picolcd] [ 679.814457] EAX: 00000000 EBX: d9f0c4e0 ECX: 00000000 EDX: 00000000 [ 679.814457] ESI: 00000000 EDI: dd6b79c0 EBP: dd4f7d90 ESP: dd4f7d80 [ 679.814457] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 679.814457] CR0: 8005003b CR2: 00000074 CR3: 1d74e000 CR4: 000007d0 [ 679.814457] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 679.814457] DR6: ffff0ff0 DR7: 00000400 [ 679.814457] Process khubd (pid: 272, ti=dd4f6000 task=dd442470 task.ti=dd4f6000) [ 679.814457] Stack: [ 679.814457] 1d6c3300 d9f0c4e0 d9f0c4e0 dd6b79c0 dd4f7da0 c132912a 00000000 d9f0c4e0 [ 679.814457] dd4f7dac c132935d 00000000 dd4f7dc0 de93b847 dd6b79c0 00000282 c700ecc8 [ 679.814457] dd4f7ddc de93924f 00000004 c700ecc8 c700e060 c700ecbc c15ee300 dd4f7dec [ 679.814457] Call Trace: [ 679.814457] [<c132912a>] led_brightness_set+0x2a/0x30 [ 679.814457] [<c132935d>] led_classdev_unregister+0xd/0x50 [ 679.814457] [<de93b847>] picolcd_exit_leds+0x27/0x40 [hid_picolcd] [ 679.814457] [<de93924f>] picolcd_remove+0xbf/0x110 [hid_picolcd] [ 679.814457] [<c132c5dd>] hid_device_remove+0x3d/0x80 [ 679.814457] [<c1294126>] __device_release_driver+0x56/0xa0 [ 679.814457] [<c1294190>] device_release_driver+0x20/0x30 [ 679.814457] [<c1293bbf>] bus_remove_device+0x9f/0xc0 [ 679.814457] [<c1291a1d>] device_del+0xdd/0x150 [ 679.814457] [<c132c205>] hid_destroy_device+0x25/0x60 [ 679.814457] [<c13368cb>] usbhid_disconnect+0x1b/0x40 [ 679.814457] [<c12f4976>] usb_unbind_interface+0x46/0x170 [ 679.814457] [<c1294126>] __device_release_driver+0x56/0xa0 [ 679.814457] [<c1294190>] device_release_driver+0x20/0x30 [ 679.814457] [<c1293bbf>] bus_remove_device+0x9f/0xc0 [ 679.814457] [<c1291a1d>] device_del+0xdd/0x150 [ 679.814457] [<c12f2975>] usb_disable_device+0x85/0x1a0 [ 679.814457] [<c1053146>] ? __cond_resched+0x16/0x30 [ 679.814457] [<c12ebdb0>] usb_disconnect+0x80/0xf0 [ 679.814457] [<c12ed61f>] hub_thread+0x3df/0x1030 [ 679.814457] [<c10484a0>] ? wake_up_bit+0x30/0x30 [ 679.814457] [<c12ed240>] ? usb_remote_wakeup+0x40/0x40 [ 679.814457] [<c1047f94>] kthread+0x74/0x80 [ 679.814457] [<c1047f20>] ? flush_kthread_worker+0x90/0x90 [ 679.814457] [<c140e33e>] kernel_thread_helper+0x6/0xd [ 679.814457] Code: e0 25 00 e0 ff ff ff 48 14 eb 99 90 55 89 e5 83 ec 10 89 5d f4 89 75 f8 89 c3 89 7d fc 8b 40 1c 89 d6 8b 00 e8 13 89 95 e2 31 c9 <39> 5c 88 74 74 13 41 83 f9 08 75 f4 8b 5d f4 8b 75 f8 8b 7d fc [ 679.814457] EIP: [<de93b5bf>] picolcd_led_set_brightness+0x1f/0xb0 [hid_picolcd] SS:ESP 0068:dd4f7d80 [ 679.814457] CR2: 0000000000000074 [ 680.116438] ---[ end trace 6f0d9d63bff280ff ]--- Signed-off-by:
-
Bruno Prémont authored
Signed-off-by:
-
Bruno Prémont authored
In order to make code maintenance easier, split the vairous functions into individial files (this removes a bunch of #ifdefs). Signed-off-by:
-
- 24 Jul, 2012 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: "The list of changes worth pointing out explicitly: - We are getting 'UHID', which is a new framework for implementing HID transport drivers in userspace (this is different from HIDRAW, which is transport-independent and provides report parsing facilities; uhid is for the other (transport) part of the pipeline). It's needed for (and currently being used by) Bluetooth-LowEnergy, as its specification mandates things we don't want in the kernel. Written by David Herrmann. - there have been quite a few bugs in runtime suspend/resume paths (probably never reported to actually happen in the wild, but still). Alan Stern fixed those. - a few other driver updates and fixes and random new device support." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (45 commits) HID: add ASUS AIO keyboard model AK1D HID: add support for Cypress barcode scanner 04B4:ED81 HID: Allow drivers to be their own listener HID: usbhid: fix error paths in suspend HID: usbhid: check for suspend or reset before restarting HID: usbhid: replace HID_REPORTED_IDLE with HID_SUSPENDED HID: usbhid: inline some simple routines HID: usbhid: fix autosuspend calls HID: usbhid: fix use-after-free bug HID: hid-core: optimize in case of hidraw HID: hidraw: fix list->buffer memleak HID: uhid: Fix sending events with invalid data HID: roccat: added sensor sysfs attribute for Savu HID: Add driver for Holtek based keyboards with broken HID HID: Add suport for the brightness control keys on HP keyboards HID: magicmouse: Implement Multi-touch Protocol B (MT-B) HID: magicmouse: Removing report_touches switch HID: roccat: rename roccat_common functions to roccat_common2 HID: roccat: fix wrong hid_err usage on struct usb_device HID: roccat: move functionality to roccat-common ... -
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon updates from Guenter Roeck: "New drivers for DA9052/53 PMIC as well as HIH-6130/HIH-6131 humidity and temperature sensors. Convert drivers to use devm_ functions and to use dev_pm_ops. Address a couple of Coverity errors/warnings as well as compile warnings. Some functional improvements in applesmc driver." * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (72 commits) hwmon: (applesmc) Ignore some temperature registers hwmon: (applesmc) Allow negative temperature values hwmon: (s3c-hwmon) Use devm_kzalloc instead of kzalloc hwmon: (w83781d) Fix compile warning hwmon: (applesmc) Shorten minimum wait time hwmon: (exynos4_tmu) Use struct dev_pm_ops for power management hwmon: (gpio-fan) Use struct dev_pm_ops for power management hwmon: (abituguru3) Use struct dev_pm_ops for power management hwmon: (abituguru) Use struct dev_pm_ops for power management hwmon: (acpi_power_meter) Fix unintentional integer overflow hwmon: (acpi_power_meter) Cleanup and optimizations hwmon: Honeywell Humidicon HIH-6130/HIH-6131 humidity and temperature sensor driver hwmon: (applesmc) Skip sensor mapping hwmon: (ntc_thermistor) Ensure that data->name string is terminated hwmon: (w83l785ts) Convert to use devm_ functions hwmon: (w83l785ts) Simplify code and improve readability hwmon: (smsc47m192) Convert to use devm_ functions hwmon: (smsc47m1) Convert to use devm_ functions hwmon: (smsc47b397) Convert to use devm_ functions hwmon: (k8temp) Convert to use devm_ functions ...
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog changes from Wim Van Sebroeck: - conversion of iTCO_wdt and orion_wdt to the generic watchdog API - uses module_platform_driver() for s3c2410_wdt - Adds support for Jetway JNF99 Motherboard - various fixes * git://www.linux-watchdog.org/linux-watchdog: watchdog: orion_wdt: Convert driver to watchdog core watchdog: s3c2410_wdt: Use module_platform_driver() watchdog: sch311x_wdt: Fix Polarity when starting watchdog Watchdog: OMAP: Fix the runtime pm code to avoid module getting stuck intransition state. watchdog: ie6xx_wdt: section mismatch in ie6xx_wdt_probe() watchdog: bcm63xx_wdt: fix driver section mismatch watchdog: iTCO_wdt.c: convert to watchdog core char/ipmi: remove local ioctl defines replaced by generic ones watchdog: xilinx: Read clock frequency directly from DT node watchdog: coh901327_wdt: use clk_prepare/unprepare watchdog: f71808e_wdt: Add support for Jetway JNF99 motherboard
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mmLinus Torvalds authored
Pull frontswap updates from Konrad Rzeszutek Wilk: "Cleanups in code and documentation. Little bit of refactoring for cleaner look." * tag 'stable/for-linus-3.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm: mm/frontswap: cleanup doc and comment error mm: frontswap: remove unneeded headers mm: frontswap: split out function to clear a page out mm: frontswap: remove unnecessary check during initialization mm: frontswap: make all branches of if statement in put page consistent mm: frontswap: split frontswap_shrink further to simplify locking mm: frontswap: split out __frontswap_unuse_pages mm: frontswap: split out __frontswap_curr_pages mm: frontswap: trivial coding convention issues mm: frontswap: remove casting from function calls through ops structure
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen update from Konrad Rzeszutek Wilk: "Features: * Performance improvement to lower the amount of traps the hypervisor has to do 32-bit guests. Mainly for setting PTE entries and updating TLS descriptors. * MCE polling driver to collect hypervisor MCE buffer and present them to /dev/mcelog. * Physical CPU online/offline support. When an privileged guest is booted it is present with virtual CPUs, which might have an 1:1 to physical CPUs but usually don't. This provides mechanism to offline/online physical CPUs. Bug-fixes for: * Coverity found fixes in the console and ACPI processor driver. * PVonHVM kexec fixes along with some cleanups. * Pages that fall within E820 gaps and non-RAM regions (and had been released to hypervisor) would be populated back, but potentially in non-RAM regions." * tag 'stable/for-linus-3.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: populate correct number of pages when across mem boundary (v2) xen PVonHVM: move shared_info to MMIO before kexec xen: simplify init_hvm_pv_info xen: remove cast from HYPERVISOR_shared_info assignment xen: enable platform-pci only in a Xen guest xen/pv-on-hvm kexec: shutdown watches from old kernel xen/x86: avoid updating TLS descriptors if they haven't changed xen/x86: add desc_equal() to compare GDT descriptors xen/mm: zero PTEs for non-present MFNs in the initial page table xen/mm: do direct hypercall in xen_set_pte() if batching is unavailable xen/hvc: Fix up checks when the info is allocated. xen/acpi: Fix potential memory leak. xen/mce: add .poll method for mcelog device driver xen/mce: schedule a workqueue to avoid sleep in atomic context xen/pcpu: Xen physical cpus online/offline sys interface xen/mce: Register native mce handler as vMCE bounce back point x86, MCE, AMD: Adjust initcall sequence for xen xen/mce: Add mcelog support for Xen platform
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Avi Kivity: "Highlights include - full big real mode emulation on pre-Westmere Intel hosts (can be disabled with emulate_invalid_guest_state=0) - relatively small ppc and s390 updates - PCID/INVPCID support in guests - EOI avoidance; 3.6 guests should perform better on 3.6 hosts on interrupt intensive workloads) - Lockless write faults during live migration - EPT accessed/dirty bits support for new Intel processors" Fix up conflicts in: - Documentation/virtual/kvm/api.txt: Stupid subchapter numbering, added next to each other. - arch/powerpc/kvm/booke_interrupts.S: PPC asm changes clashing with the KVM fixes - arch/s390/include/asm/sigp.h, arch/s390/kvm/sigp.c: Duplicated commits through the kvm tree and the s390 tree, with subsequent edits in the KVM tree. * tag 'kvm-3.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits) KVM: fix race with level interrupts x86, hyper: fix build with !CONFIG_KVM_GUEST Revert "apic: fix kvm build on UP without IOAPIC" KVM guest: switch to apic_set_eoi_write, apic_write apic: add apic_set_eoi_write for PV use KVM: VMX: Implement PCID/INVPCID for guests with EPT KVM: Add x86_hyper_kvm to complete detect_hypervisor_platform check KVM: PPC: Critical interrupt emulation support KVM: PPC: e500mc: Fix tlbilx emulation for 64-bit guests KVM: PPC64: booke: Set interrupt computation mode for 64-bit host KVM: PPC: bookehv: Add ESR flag to Data Storage Interrupt KVM: PPC: bookehv64: Add support for std/ld emulation. booke: Added crit/mc exception handler for e500v2 booke/bookehv: Add host crit-watchdog exception support KVM: MMU: document mmu-lock and fast page fault KVM: MMU: fix kvm_mmu_pagetable_walk tracepoint KVM: MMU: trace fast page fault KVM: MMU: fast path of handling guest page fault KVM: MMU: introduce SPTE_MMU_WRITEABLE bit KVM: MMU: fold tlb flush judgement into mmu_spte_update ... -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking changes from David S Miller: 1) Remove the ipv4 routing cache. Now lookups go directly into the FIB trie and use prebuilt routes cached there. No more garbage collection, no more rDOS attacks on the routing cache. Instead we now get predictable and consistent performance, no matter what the pattern of traffic we service. This has been almost 2 years in the making. Special thanks to Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who have helped along the way. I'm sure that with a change of this magnitude there will be some kind of fallout, but such things ought the be simple to fix at this point. Luckily I'm not European so I'll be around all of August to fix things :-) The major stages of this work here are each fronted by a forced merge commit whose commit message contains a top-level description of the motivations and implementation issues. 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on input. 3) TCP SYN/ACK performance tweaks from Eric Dumazet. 4) Add namespace support for netfilter L4 conntrack helpers, from Gao Feng. 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from Yuval Mintz. 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet. 7) Support for connection tracker helpers in userspace, from Pablo Neira Ayuso. 8) Allow userspace driven TX load balancing functions in TEAM driver, from Jiri Pirko. 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with embedded gotos. 10) TCP Small Queues, essentially minimize the amount of TCP data queued up in the packet scheduler layer. Whereas the existing BQL (Byte Queue Limits) limits the pkt_sched --> netdevice queuing levels, this controls the TCP --> pkt_sched queueing levels. From Eric Dumazet. 11) Reduce the number of get_page/put_page ops done on SKB fragments, from Alexander Duyck. 12) Implement protection against blind resets in TCP (RFC 5961), from Eric Dumazet. 13) Support the client side of TCP Fast Open, basically the ability to send data in the SYN exchange, from Yuchung Cheng. Basically, the sender queues up data with a sendmsg() call using MSG_FASTOPEN, then they do the connect() which emits the queued up fastopen data. 14) Avoid all the problems we get into in TCP when timers or PMTU events hit a locked socket. The TCP Small Queues changes added a tcp_release_cb() that allows us to queue work up to the release_sock() caller, and that's what we use here too. From Eric Dumazet. 15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits) genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP r8169: revert "add byte queue limit support". ipv4: Change rt->rt_iif encoding. net: Make skb->skb_iif always track skb->dev ipv4: Prepare for change of rt->rt_iif encoding. ipv4: Remove all RTCF_DIRECTSRC handliing. ipv4: Really ignore ICMP address requests/replies. decnet: Don't set RTCF_DIRECTSRC. net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse. ipv4: Remove redundant assignment rds: set correct msg_namelen openvswitch: potential NULL deref in sample() tcp: dont drop MTU reduction indications bnx2x: Add new 57840 device IDs tcp: avoid oops in tcp_metrics and reset tcpm_stamp niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value niu: Fix to check for dma mapping errors. net: Fix references to out-of-scope variables in put_cmsg_compat() net: ethernet: davinci_emac: add pm_runtime support net: ethernet: davinci_emac: Remove unnecessary #include ... -
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 changes from Martin Schwidefsky: "No new functions, a few changes to make the code more robust, some cleanups and bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits) s390/vtimer: rework virtual timer interface s390/dis: Add the servc instruction to the disassembler. s390/comments: unify copyright messages and remove file names s390/lgr: Add init check to lgr_info_log() s390/cpu init: use __get_cpu_var instead of per_cpu s390/idle: reduce size of s390_idle_data structure s390/idle: fix sequence handling vs cpu hotplug s390/ap: resend enable adapter interrupt request. s390/hypfs: Add missing get_next_ino() s390/dasd: add shutdown action s390/ipl: Fix ipib handling for "dumpreipl" shutdown action s390/smp: make absolute lowcore / cpu restart parameter accesses more robust s390/vmlogrdr: cleanup driver attribute usage s390/vmlogrdr: cleanup device attribute usage s390/ccwgroup: remove unused ccwgroup_device member s390/cio/chp: cleanup attribute usage s390/sigp: use sigp order code defines in assembly code s390/smp: use sigp cpu status definitions s390/smp/kvm: unifiy sigp definitions s390/smp: remove redundant check ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfinLinus Torvalds authored
Pull blackfin changes from Bob Liu: "The big changes are adding PM and HDMI support for bf60x, other patches are various bug fix and code cleanup." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (48 commits) bf60x: fix build warning PM: add BF60x flash suspend and resume support blackfin: twi: read twi mmr via bfin_read macro dpm: deepsleep: reserve stack bf60x: cpufreq: fix anomaly 05000273 bf609: add adv7511 display support blackfin: cplb-nompu: fix ROM cplb size for bf609-ezkit bf60x: Add double fault, hardware error and NMI SEC handler bf60x: update anomaly id in serial and twi driver headers. bf60x: vs6624 pin update bf60x: add default anomaly setting. bf60x: update bf60x anomaly list. bf60x: sec: Enable sec interrupt source priority configuration. bf60x: sec: Clean up interrupt initialization code for SEC. bf609: reuse bf5xx-i2s-pcm.c as i2s pcm driver bf561: add capabilities in adv7183_inputs bf609: convert vs6624 blank_clocks to black_pixels blackfin: fix musb macro name cleanup: sec and linkport only built on bf60x bfin: pint: add pint suspend and resume ...
-
git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds authored
Pull C6X changes from Mark Salter: - remove use of legacy irqs which really wasn't needed - add support for C66x SoC on EVMC6678 board - clean up compiler warning * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: C6X: clean up compiler warning C6X: add basic support for TMS320C6678 SoC C6X: remove dependence on legacy IRQs C6X: remove megamod-pic requirement on direct-mapped core pic
-
Jiri Kosina authored
Conflicts: drivers/hid/Kconfig
-
Jiri Kosina authored
Merge branches 'hidraw', 'magicmouse', 'multitouch', 'roccat', 'suspend-fixes' and 'upstream' into for-linus
-
WANG Cong authored
lockdep_is_held() is defined when CONFIG_LOCKDEP, not CONFIG_PROVE_LOCKING. Cc: "David S. Miller" <davem@davemloft.net> Cc: Jesse Gross <jesse@nicira.com> Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bob Liu authored
Fix several build warning while using bf609-ezkit_defconfig. Signed-off-by:Bob Liu <lliubbo@gmail.com>
-
Steven Miao authored
Signed-off-by:
Steven Miao <realmz6@gmail.com> Signed-off-by:
-
Sonic Zhang authored
Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Steven Miao authored
Reserve 12 bytes on the stack for deepsleep use. Signed-off-by:
-
Sonic Zhang authored
Anomaly 05000273 doesn't apply to bf60x. Signed-off-by:
-
Scott Jiang authored
Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
Bob Liu authored
In user xip test, there is a cplb error when ROMKERNEL try to mount romfs using 'mount -t romfs /dev/mtdblock2 /mnt', becasue the CPLB setting is not correct. Signed-off-by:
-
