- 25 Sep, 2018 2 commits
-
-
Mahesh Kumar authored
This cleanup patch makes changes to use for_each_pipe loop during bit-mask assignment of allowed crtc with encoder. changes: - use BIT(i) macro instead of (1 << i) (Chris) changes from V2: - use int for consistency (Jani) changes from V3: - instead use enum pipe (Ville) changes from V4: - drop DP/HDMI changes, as already part of patch from ville Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180919083126.31805-1-mahesh1.kumar@intel.com
-
Chris Wilson authored
In the sequence <0>[ 531.960431] drv_self-4806 7.... 527402570us : intel_gpu_reset: engine_mask=1, ret=0, retry=0 <0>[ 531.960431] drv_self-4806 7.... 527402571us : execlists_reset: rcs0 request global=115de, current=71133 <0>[ 531.960431] drv_self-4806 7d..1 527402571us : execlists_cancel_port_requests: rcs0:port0 global=71134 (fence 826b:198), (current 71133) <0>[ 531.960431] drv_self-4806 7d..1 527402572us : execlists_cancel_port_requests: rcs0:port1 global=71135 (fence 826c:53), (current 71133) <0>[ 531.960431] drv_self-4806 7d..1 527402572us : __i915_request_unsubmit: rcs0 fence 826c:53 <- global=71135, current 71133 <0>[ 531.960431] drv_self-4806 7d..1 527402579us : __i915_request_unsubmit: rcs0 fence 826b:198 <- global=71134, current 71133 <0>[ 531.960431] drv_self-4806 7.... 527402613us : intel_engine_cancel_stop_cs: rcs0 <0>[ 531.960431] drv_self-4806 7.... 527402624us : execlists_reset_finish: rcs0 we are missing the execlists_submission_tasklet() invocation before the execlists_reset_fini() implying that either the queue is empty, or we failed to schedule and run the tasklet on finish. Add an assert so we are sure that on unsubmitting the incomplete request after reset, the queue is indeed populated. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180919195544.1511-12-chris@chris-wilson.co.uk
-
- 24 Sep, 2018 4 commits
-
-
Madhav Chauhan authored
This patch programs the time (in escape clocks) to drive the link in the initialization (i.e. LP-11) state. v2: Rebase v3: Remove step hard coding comments (Jani N) Signed-off-by:
Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by:
-
Madhav Chauhan authored
This patch enables DDI buffer by writing to DDI_BUF_CTL register and wait for DDI status to be *not idle* for a port. v2: Rebase v3: Remove step hard coding comments (Jani N) Signed-off-by:
-
Madhav Chauhan authored
This patch setup voltage swing before enabling combo PHY DDI (shared with DSI). Note that DSI voltage swing programming is for high speed data buffers. HW automatically handles the voltage swing for the low power data buffers. v2: Rebase v3: Address various review comments related to VSWING programming (Jani N) Signed-off-by: -
Madhav Chauhan authored
This patch set the loadgen select and latency optimization for aux and transmit lanes of combo phy transmitters. It will be used for MIPI DSI HS operations. v2: Rebase v3: Add empty line to make code more legible (Ville). Signed-off-by:
-
- 21 Sep, 2018 10 commits
-
-
Maarten Lankhorst authored
We can't make NV12 work any other way. The scaler doesn't handle odd coordinates well, and we will get visual corruption on the screen. Changes since v1: - Put the check in intel_plane_check_src_coordinates. (Ville) Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-9-maarten.lankhorst@linux.intel.com
-
Maarten Lankhorst authored
This cleans the code up slightly, and will make other changes easier. Signed-off-by:
-
Maarten Lankhorst authored
On skylake we can switch to a high quality scaler mode when only 1 out of 2 scalers are used, but on GLK and later bit 28 has a different meaning. Don't set it, and make clear the distinction between SKL and later PS values. Changes since v1: - Add missing break statement. Signed-off-by:
-
Maarten Lankhorst authored
drm_atomic_helper_commit_planes_on_crtc calls begin_commit, then plane_update hooks, then flush_commit. Because we keep our own visibility tracking through plane_state->visible there's no need to rely on the atomic hooks for this. By explicitly writing our own helper, we can update visible planes as needed, which is useful to make NV12 support work as intended. Changes since v1: - Reword commit message. (Matt Roper) - Rename to intel_update_planes_on_crtc(). (Matt) Signed-off-by:
-
Maarten Lankhorst authored
This will only disable planes we actually had marked as visible in crtc_state->visible_planes and cleans up intel_crtc_disable_plane() slightly. This is also useful for when we start enabling NV12 support for gen11, in which we will make the separate Y plane visible, but ignore the Y plane's state. Signed-off-by:
-
Maarten Lankhorst authored
We need to assume the plane has been visible before, even if no CRTC is assigned to the plane. This is because when enabling a nv12 plane on gen11, we will have to enable an extra plane and make it visible by marking it in crtc_state->active_planes for intel_update_planes_on_crtc(). Additionally, clear visible flag in intel_plane_atomic_check, in case we ever hit a bug with visibility. Our code implicitly assumes that plane_state->visible is only true when crtc and fb are set, so we will either null deref in intel_fbc_choose_crtc() or do something bad during the actual commit which cares even more. Changes since v1: - Unconditionally clear crtc_state->active_planes as well. - Reword commit message, since this is now a preparation patch for NV12 Y / UV plane linking. Signed-off-by:
-
Maarten Lankhorst authored
While we may not update new_crtc_state, we may clear active_planes if the new cursor update state will disable the cursor, but we fail after. If this is immediately followed by a modeset disable, we may soon not disable the planes correctly when we start depending on active_planes. Changes since v1: - Clarify why we cannot swap crtc_state. (Matt) Signed-off-by:
-
Maarten Lankhorst authored
Use old/new_intel_crtc_state, and get rid of all the conversion casts where they don't add anything. Signed-off-by:
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Joonas Lahtinen authored
Signed-off-by:
-
- 20 Sep, 2018 8 commits
-
-
Chris Wilson authored
Fix up the error unwind for logical_ring_init() failing by moving the cleanup into the callers who own the various bits of state during initialisation, so we don't forget to free the state allocated by the caller. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920195948.16448-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Once we have flushed the first request through the system to both load a context and record the default state; tell the GPU to park and idle itself, putting itself immediately (hopefully at least) into a powersaving state, and allowing ourselves to start from known state after setting up all our bookkeeping. Signed-off-by:
-
Chris Wilson authored
As we emit requests or touch HW directly for some of the live tests, the requirement is that we hold the rpm wakeref before doing so. We want a mix of granularity since we will want to test runtime suspend, so try to mark up only the critical sections where we need rpm for the live test. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108002Signed-off-by:
-
Matthew Auld authored
It really wants dev_priv anyway, also now matches i915_gem_init_stolen. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Matthew Auld authored
If we copy all the contents of the sg across and not just the page link, we can then also put it to work in fake_get_huge_pages and beyond. Signed-off-by:
-
Chris Wilson authored
Stolen memory is lost across S4 (hibernate) or S3-RST as it is a portion of ordinary volatile RAM. As we allocate our rings from stolen, this may include the rings used for our preempt context and their breadcrumb instructions. In order to allow preemption following hibernation and loss of stolen memory, we therefore need to repopulate the instructions inside the lost ring upon resume. To handle both module load and resume, we simply defer constructing the ring to first use. Testcase: igt/drv_selftest/live_gem Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180919205432.18394-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
We need to exercise the HW and submission paths for switching contexts rapidly to check that features such as execlists' wa_tail are adequate. Plus it's an interesting baseline latency metric. v2: Check the initial request for allocation errors v3: Use finite waits for more robust handling of broken code Signed-off-by:
-
Chris Wilson authored
Remember to release the batch bo reference if we hit an error trying to submit our MI_STORE_DWORD_IMM. References: https://bugs.freedesktop.org/show_bug.cgi?id=107979Signed-off-by:
-
- 18 Sep, 2018 4 commits
-
-
Dhinakaran Pandiyan authored
PSR requires AUX IO power well to be enabled. This was already in place for CNL, extend this for ICL too. Not enabling the power well results in the aux error interrupts when the hardware exits PSR. Reported-by:
Casey G Bowman <casey.g.bowman@intel.com> Reported-by:
Jyoti R Yadav <jyoti.r.yadav@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Jyoti R Yadav <jyoti.r.yadav@intel.com> Cc: Casey G Bowman <casey.g.bowman@intel.com> Tested-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180914001822.2503-1-dhinakaran.pandiyan@intel.com
-
Ville Syrjälä authored
SDVO encoders can have multiple different types of outputs hanging off them. Currently the code tries to muck around with various is_foo flags in the encoder to figure out which type its driving. That doesn't work with atomic and other stuff, so let's nuke those flags and just look at which type of connector we're actually dealing with. The is_hdmi we'll need as that's not discoverable via the output flags, but we'll just move it under the connector. We'll also move the sdvo fixed mode handling out from the .get_modes() hook into the sdvo lvds init function so that we can bail out properly if there is no fixed mode to be found. Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Ville Syrjälä authored
Smatch reports: ../drivers/gpu/drm/i915/intel_sprite.c:1192 skl_plane_check_fb() warn: was || intended here instead of &&? Obviously smatch is correct here since we're trying to check if we're using either of the ccs modifiers. Since we now have is_ccs_modifier() let's use it to fix this. Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: José Roberto de Souza <jose.souza@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: e21c2d33 ("drm/i915: Move skl plane fb related checks into a better place") Signed-off-by:
-
Ville Syrjälä authored
Clean up some cases where we're dealing with GTT pages instead of system pages to use I915_GTT_PAGE_SIZE instead of PAGE_SHIT. So just replace the the shifts with mul/div as appropriate. These are the easy ones, the rest probably need some actual thought. No real changes in the generated asm. Only gen8_ppgtt_insert_4lvl() was affected as gcc decided to do the following change: - be9: 89 d9 mov %ebx,%ecx - beb: c1 e1 0c shl $0xc,%ecx - bee: 48 63 c9 movslq %ecx,%rcx + be9: 48 63 cb movslq %ebx,%rcx + bec: 48 c1 e1 0c shl $0xc,%rcx and that then shifted a bunch of the offset by one byte. I presume the sign extensions in the asm are due to integer promotions from u16 etc. Hopefully someone has confirmed that those don't end up doing the wrong thing for us. Signed-off-by:
-
- 14 Sep, 2018 9 commits
-
-
Chris Wilson authored
If we fail to allocate an array for a large number of user requested capture objects, reduce the array size and try to grab at least some of the objects! Signed-off-by:
-
Chris Wilson authored
The prior assumption was that we did not need to reset the CSB on wedging when cancelling the outstanding requests as it would be cleaned up in the subsequent reset prior to restarting the GPU. However, what was not accounted for was that in preparing for the reset, we would try to process the outstanding CSB entries. If the GPU happened to complete a CS event just as we were performing the cancellation of requests, that event would be kept in the CSB until the reset -- but our bookkeeping was cleared, causing confusion when trying to complete the CS event. v2: Use a sanitize on unwedge to avoid interfering with eio suspend (where we intentionally disable GPU reset). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107925Signed-off-by:
-
Chris Wilson authored
If an asynchronous wait on a foriegn fence, we print a warning indicating which fence was not signaled. As i915_sw_fences become more common, include the debug hint (the symbol-name of the target) to help identify the waiter. E.g. [ 31.968144] Asynchronous wait on fence sw_sync:gem_eio:1 timed out (hint:submit_notify [i915]) We also want to downgrade from a warning to a notice (normal but significant condition) as the timeout is imposed and controlled by the caller (i.e. it is deliberate) and can be provoked by userspace. Signed-off-by:
-
Chris Wilson authored
That we use a WB mapping for updating the RING_TAIL register inside the context image even on !llc machines has been a source of consternation for every reader. It appears to work on bsw+, but it may just have been that we have been incredibly bad at detecting the errors. v2: With extra enthusiasm. v3: Drop force of map type for pinned default_state as by the time we pin it, the map type is always WB and doesn't conflict with the earlier use by ce->state. v4: Transfer engine->default_state from MAP_WC to MAP_WB on creation so we do not need the MAP_FORCE littered around the backends Signed-off-by:
-
Chris Wilson authored
Check we can indeed acquire a WB mapping of the context image on module load. Later this will give us the opportunity to validate that we can switch from WC to WB as required. Signed-off-by:
-
Chris Wilson authored
Now that we reload both RING_HEAD and RING_TAIL when rebinding the context, we do not need to scrub those registers immediately on resume. v2: Handle the perma-pinned contexts. v3: Set RING_TAIL on context-pin so that we always have known state in the context image for the ring registers and all parties have similar code (ripe for refactoring). Signed-off-by:
-
Chris Wilson authored
In order to reduce latency when checking for idle we kick the tasklet directly. Sometimes this is not enough as it is queued on another cpu and so to improve the accuracy of this idle-check (and so to reduce latency overall by avoiding another pass, or worse declaring a timeout!) wait for the tasklet to complete. References: https://bugs.freedesktop.org/show_bug.cgi?id=107916Signed-off-by:
-
Chris Wilson authored
If we try and fail to allocate a i915_request, we apply some backpressure on the clients to throttle the memory allocations coming from i915.ko. Currently, we wait until completely idle, but this is far too heavy and leads to some situations where the only escape is to declare a client hung and reset the GPU. The intent is to only ratelimit the allocation requests and to allow ourselves to recycle requests and memory from any long queues built up by a client hog. Although the system memory is inherently a global resources, we don't want to overly penalize an unlucky client to pay the price of reaping a hog. To reduce the influence of one client on another, we can instead of waiting for the entire GPU to idle, impose a barrier on the local client. (One end goal for request allocation is for scalability to many concurrent allocators; simultaneous execbufs.) To prevent ourselves from getting caught out by long running requests (requests that may never finish without userspace intervention, whom we are blocking) we need to impose a finite timeout, ideally shorter than hangcheck. A long time ago Paul McKenney suggested that RCU users should ratelimit themselves using judicious use of cond_synchronize_rcu(). This gives us the opportunity to reduce our indefinite wait for the GPU to idle to a wait for the RCU grace period of the previous allocation along this timeline to expire, satisfying both the local and finite properties we desire for our ratelimiting. There are still a few global steps (reclaim not least amongst those!) when we exhaust the immediate slab pool, at least now the wait is itself decoupled from struct_mutex for our glorious highly parallel future! Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106680Signed-off-by:
-
Chris Wilson authored
For finding the panel fitter and PLL for a particular modeset is a part of that modeset and should be included with the reset of the DRM_DEBUG_KMS. Signed-off-by:
-
- 13 Sep, 2018 3 commits
-
-
Mahesh Kumar authored
IPC may cause underflows if not used with dual channel symmetric memory configuration. Disable IPC for non symmetric configurations in affected platforms. Display WA #1141 Changes Since V1: - Re-arrange the code. - update wrapper to return if memory is symmetric (Rodrigo) Signed-off-by:
-
Mahesh Kumar authored
If KMS decide to disable IPC make sure we override IPC configuration set by BIOS. Signed-off-by:
-
Mahesh Kumar authored
Memory with 16GB dimms require an increase of 1us in level-0 latency. This patch implements the same. Bspec: 4381 changes since V1: - s/memdev_info/dram_info - make skl_is_16gb_dimm pure function Changes since V2: - make is_16gb_dimm more generic - rebase Changes since V3: - Simplify condition (Maarten) Signed-off-by:
-
