1. 13 Mar, 2015 9 commits
  2. 12 Mar, 2015 5 commits
  3. 11 Mar, 2015 4 commits
  4. 09 Mar, 2015 1 commit
  5. 05 Mar, 2015 4 commits
  6. 04 Mar, 2015 5 commits
  7. 03 Mar, 2015 8 commits
    • Nicolas Ferre's avatar
    • Alexander Stein's avatar
      ARM: at91/dt: at91sam9263: Fixup sram1 device tree node · 940e766a
      Alexander Stein authored
      Commit ff04660e48b20 ("ARM: at91/dt: add SRAM nodes") used the same base
      address for sram0 and sram1 leading to the following warning:
      WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x50/0x70()
      sysfs: cannot create duplicate filename '/devices/platform/300000.sram'
      Fix the base address for sram1.
      Signed-off-by: default avatarAlexander Stein <alexanders83@web.de>
      Acked-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
      Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      940e766a
    • Alexandre Belloni's avatar
      ARM: at91: pm: fix SRAM allocation · 4a031f7d
      Alexandre Belloni authored
      On some platforms, there are multiple SRAM nodes defined in the device tree but
      some of them are disabled, leading to allocation failure. Try to find the first
      enabled SRAM node and allocate from it.
      Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
      Tested-by: default avatarWenyou Yang <wenyou.yang@atmel.com>
      Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      4a031f7d
    • Alexandre Belloni's avatar
      ARM: at91: pm: fix at91rm9200 standby · 84e87166
      Alexandre Belloni authored
      at91rm9200 standby and suspend to ram has been broken since
      00482a40. It is wrongly using AT91_BASE_SYS which is a physical address
      and actually doesn't correspond to any register on at91rm9200.
      
      Use the correct at91_ramc_base[0] instead.
      
      Fixes: 00482a40 (ARM: at91: implement the standby function for pm/cpuidle)
      Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
      Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      84e87166
    • Peter Rosin's avatar
      pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories. · 02f513a0
      Peter Rosin authored
      The DDRSDR controller fails miserably to put LPDDR1 memories in
      self-refresh. Force the controller to think it has DDR2 memories
      during the self-refresh period, as the DDR2 self-refresh spec is
      equivalent to LPDDR1, and is correctly implemented in the
      controller.
      
      Assume that the second controller has the same fault, but that is
      untested.
      Signed-off-by: default avatarPeter Rosin <peda@axentia.se>
      Acked-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      02f513a0
    • Sylvain Rochet's avatar
      pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts · ad4a38d2
      Sylvain Rochet authored
      Removed timeout on XTAL, PLL lock and Master Clock Ready, hang if
      something went wrong instead of continuing in unknown condition. There
      is not much we can do if a PLL lock never ends, we are running in SRAM
      and we will not be able to connect back the sdram or ddram in order to
      be able to fire up a message or just panic.
      
      As a bonus, not decounting the timeout register in slow clock mode
      reduce cumulated suspend time and resume time from ~17ms to ~15ms.
      Signed-off-by: default avatarSylvain Rochet <sylvain.rochet@finsecur.com>
      Acked-by: default avatarWenyou.Yang <wenyou.yang@atmel.com>
      Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
      ad4a38d2
    • Linus Torvalds's avatar
      Linux 4.0-rc2 · 13a7a6ac
      Linus Torvalds authored
      13a7a6ac
    • Daniel Vetter's avatar
      drm/i915: Fix modeset state confusion in the load detect code · 9128b040
      Daniel Vetter authored
      This is a tricky story of the new atomic state handling and the legacy
      code fighting over each another. The bug at hand is an underrun of the
      framebuffer reference with subsequent hilarity caused by the load
      detect code. Which is peculiar since the the exact same code works
      fine as the implementation of the legacy setcrtc ioctl.
      
      Let's look at the ingredients:
      
      - Currently our code is a crazy mix of legacy modeset interfaces to
        set the parameters and half-baked atomic state tracking underneath.
        While this transition is going we're using the transitional plane
        helpers to update the atomic side (drm_plane_helper_disable/update
        and friends), i.e. plane->state->fb. Since the state structure owns
        the fb those functions take care of that themselves.
      
        The legacy state (specifically crtc->primary->fb) is still managed
        by the old code (and mostly by the drm core), with the fb reference
        counting done by callers (core drm for the ioctl or the i915 load
        detect code). The relevant commit is
      
        commit ea2c67bb
        Author: Matt Roper <matthew.d.roper@intel.com>
        Date:   Tue Dec 23 10:41:52 2014 -0800
      
            drm/i915: Move to atomic plane helpers (v9)
      
      - drm_plane_helper_disable has special code to handle multiple calls
        in a row - it checks plane->crtc == NULL and bails out. This is to
        match the proper atomic implementation which needs the crtc to get
        at the implied locking context atomic updates always need. See
      
        commit acf24a39
        Author: Daniel Vetter <daniel.vetter@ffwll.ch>
        Date:   Tue Jul 29 15:33:05 2014 +0200
      
            drm/plane-helper: transitional atomic plane helpers
      
      - The universal plane code split out the implicit primary plane from
        the CRTC into it's own full-blown drm_plane object. As part of that
        the setcrtc ioctl (which updated both the crtc mode and primary
        plane) learned to set crtc->primary->crtc on modeset to make sure
        the plane->crtc assignments statate up to date in
      
        commit e13161af
        Author: Matt Roper <matthew.d.roper@intel.com>
        Date:   Tue Apr 1 15:22:38 2014 -0700
      
            drm: Add drm_crtc_init_with_planes() (v2)
      
        Unfortunately we've forgotten to update the load detect code. Which
        wasn't a problem since the load detect modeset is temporary and
        always undone before we drop the locks.
      
      - Finally there is a organically grown history (i.e. don't ask) around
        who sets the legacy plane->fb for the various driver entry points.
        Originally updating that was the drivers duty, but for almost all
        places we've moved that (plus updating the refcounts) into the core.
        Again the exception is the load detect code.
      
      Taking all together the following happens:
      - The load detect code doesn't set crtc->primary->crtc. This is only
        really an issue on crtcs never before used or when userspace
        explicitly disabled the primary plane.
      
      - The plane helper glue code short-circuits because of that and leaves
        a non-NULL fb behind in plane->state->fb and plane->fb. The state
        fb isn't a real problem (it's properly refcounted on its own), it's
        just the canary.
      
      - Load detect code drops the reference for that fb, but doesn't set
        plane->fb = NULL. This is ok since it's still living in that old
        world where drivers had to clear the pointer but the core/callers
        handled the refcounting.
      
      - On the next modeset the drm core notices plane->fb and takes care of
        refcounting it properly by doing another unref. This drops the
        refcount to zero, leaving state->plane now pointing at freed memory.
      
      - intel_plane_duplicate_state still assume it owns a reference to that
        very state->fb and bad things start to happen.
      
      Fix this all by applying the same duct-tape as for the legacy setcrtc
      ioctl code and set crtc->primary->crtc properly.
      
      Cc: Matt Roper <matthew.d.roper@intel.com>
      Cc: Paul Bolle <pebolle@tiscali.nl>
      Cc: Rob Clark <robdclark@gmail.com>
      Cc: Paulo Zanoni <przanoni@gmail.com>
      Cc: Sean Paul <seanpaul@chromium.org>
      Cc: Matt Roper <matthew.d.roper@intel.com>
      Reported-and-tested-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Reported-by: default avatarPaul Bolle <pebolle@tiscali.nl>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9128b040
  8. 02 Mar, 2015 4 commits
    • Linus Torvalds's avatar
      Merge tag 'gpio-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · 023a6007
      Linus Torvalds authored
      Pull GPIO fixes from Linus Walleij:
       "Two GPIO fixes:
      
         - Fix a translation problem in of_get_named_gpiod_flags()
      
         - Fix a long standing container_of() mistake in the TPS65912 driver"
      
      * tag 'gpio-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
        gpio: tps65912: fix wrong container_of arguments
        gpiolib: of: allow of_gpiochip_find_and_xlate to find more than one chip per node
      023a6007
    • Linus Torvalds's avatar
      Merge branch 'fixes-for-4.0-rc2' of... · 10d6dfc1
      Linus Torvalds authored
      Merge branch 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
      
      Pull thermal management fixes from Eduardo Valentin:
       "Specifics:
      
         - Several fixes in tmon tool.
      
         - Fixes in intel int340x for _ART and _TRT tables.
      
         - Add id for Avoton SoC into powerclamp driver.
      
         - Fixes in RCAR thermal driver to remove race conditions and fix fail
           path
      
         - Fixes in TI thermal driver: removal of unnecessary code and build
           fix if !CONFIG_PM_SLEEP
      
         - Cleanups in exynos thermal driver
      
         - Add stubs for include/linux/thermal.h.  Now drivers using thermal
           calls but that also work without CONFIG_THERMAL will be able to
           compile for systems that don't care about thermal.
      
        Note: I am sending this pull on Rui's behalf while he fixes issues in
        his Linux box"
      
      * 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
        thermal: int340x_thermal: Ignore missing _ART, _TRT tables
        thermal/intel_powerclamp: add id for Avoton SoC
        tools/thermal: tmon: silence 'set but not used' warnings
        tools/thermal: tmon: use pkg-config to determine library dependencies
        tools/thermal: tmon: support cross-compiling
        tools/thermal: tmon: add .gitignore
        tools/thermal: tmon: fixup tui windowing calculations
        tools/thermal: tmon: tui: don't hard-code dialog window size assumptions
        tools/thermal: tmon: add min/max macros
        tools/thermal: tmon: add --target-temp parameter
        thermal: exynos: Clean-up code to use oneline entry for exynos compatible table
        thermal: rcar: Make error and remove paths symmetrical with init
        thermal: rcar: Fix race condition between init and interrupt
        thermal: Introduce dummy functions when thermal is not defined
        ti-soc-thermal: Delete an unnecessary check before the function call "cpufreq_cooling_unregister"
        thermal: ti-soc-thermal: bandgap: Fix build warning if !CONFIG_PM_SLEEP
      10d6dfc1
    • Linus Torvalds's avatar
      Merge tag 'md/4.0-fixes' of git://neil.brown.name/md · 1a6f77ab
      Linus Torvalds authored
      Pull md fixes from Neil Brown:
       "Three md fixes:
      
         - fix a read-balance problem that was reported 2 years ago, but that
           I never noticed the report :-(
      
         - fix for rare RAID6 problem causing incorrect bitmap updates when
           two devices fail.
      
         - add __ATTR_PREALLOC annotation now that it is possible"
      
      * tag 'md/4.0-fixes' of git://neil.brown.name/md:
        md: mark some attributes as pre-alloc
        raid5: check faulty flag for array status during recovery.
        md/raid1: fix read balance when a drive is write-mostly.
      1a6f77ab
    • Linus Torvalds's avatar
      Merge tag 'metag-fixes-v4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag · 49db1f0e
      Linus Torvalds authored
      Pull arch/metag fix from James Hogan:
       "This is just a single patch to fix the KSTK_EIP() and KSTK_ESP()
        macros for metag which have always been erronously returning the PC
        and stack pointer of the task's kernel context rather than from its
        user context saved at entry from userland into the kernel, which
        affects the contents of /proc/<pid>/maps and /proc/<pid>/stat"
      
      * tag 'metag-fixes-v4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
        metag: Fix KSTK_EIP() and KSTK_ESP() macros
      49db1f0e