- 10 Aug, 2015 40 commits
-
-
Yao-Wen Mao authored
commit 2d1cb7f6 upstream. Add the correct dB ranges of Bose Companion 5 and Drangonfly DAC 1.2. Signed-off-by:
Yao-Wen Mao <yaowen@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 3a05d12f upstream. Dell Vostro 5480 (1028:069a) needs the very same quirk used for Vostro 5470 model to make bass speakers properly working. Reported-and-tested-by:
Paulo Roberto de Oliveira Castro <p.oliveira.castro@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit b9d9c9ef upstream. Toshiba Satellite S50D has another model with a different PCI SSID (1179:fa93) while the previous fixup was for 1179:fa91. Adjust the fixup entry with SND_PCI_QUIRK_MASK() to match with both devices. Reported-by:
Tim Sample <timsample@gmail.com> Signed-off-by:
-
David Henningsson authored
commit cba59972 upstream. Without this patch, the headset mic will not work on this machine. BugLink: https://bugs.launchpad.net/bugs/1476987Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Aaron Plattner authored
commit 6c3d9119 upstream. Vendor ID 0x10de007d is used by a yet-to-be-named GPU chip. This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is appropriate here. Signed-off-by:
Aaron Plattner <aplattner@nvidia.com> Signed-off-by:
-
Maruthi Srinivas Bayyavarapu authored
commit 5022813d upstream. Fixes audio problems on newer asics Signed-off-by:
Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Signed-off-by:
-
Mateusz Sylwestrzak authored
commit 0420694d upstream. Acer Aspire V5 with the ALC282 codec is given the wrong value for the 0x19 PIN by the laptop's BIOS. Overriding it with the correct value adds support for the headset microphone which would not otherwise be visible in the system. The fix is based on commit 7819717b with a similar quirk for Acer Aspire with the ALC269 codec. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96201Signed-off-by:
Mateusz Sylwestrzak <matisec7@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 67756e31 upstream. With the nonatomic PCM ops, the system may spew lockdep warnings like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc1-jeejaval3 #12 Not tainted --------------------------------------------- aplay/4029 is trying to acquire lock: (snd_pcm_link_rwsem){.+.+.+}, at: [<ffffffff816fd473>] snd_pcm_stream_lock+0x43/0x60 but task is already holding lock: (snd_pcm_link_rwsem){.+.+.+}, at: [<ffffffff816fcf29>] snd_pcm_action_nonatomic+0x29/0x80 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(snd_pcm_link_rwsem); lock(snd_pcm_link_rwsem); Although this is false-positive as the rwsem is taken always as read-only for these code paths, it's certainly annoying to see this at any occasion. A simple fix is to use down_read_nested() in snd_pcm_stream_lock() that can be called inside another lock. Reported-by:
Vinod Koul <vinod.koul@intel.com> Reported-by:
Jeeja Kp <jeeja.kp@intel.com> Tested-by:
-
Takashi Iwai authored
commit 4d0e6775 upstream. When a monitor stream is active, the next PCM stream access results in EBUSY error because of the check in line6_stream_start(). Fix this by just skipping the submission of pending URBs when the stream is already running instead. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101431Signed-off-by:
-
Dominic Sacré authored
commit 0689a86a upstream. The Steinberg MI2 and MI4 interfaces are compatible with the USB class audio spec, but the MIDI part of the devices is reported as a vendor specific interface. This patch adds entries to quirks-table.h to recognize the MIDI endpoints. Audio functionality was already working and is unaffected by this change. Signed-off-by:
Dominic Sacré <dominic.sacre@gmx.de> Signed-off-by:
Albert Huitsing <albert@huitsing.nl> Acked-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Thomas Gleixner authored
commit 75a06189 upstream. The resend mechanism happily calls the interrupt handler of interrupts which are marked IRQ_NESTED_THREAD from softirq context. This can result in crashes because the interrupt handler is not the proper way to invoke the device handlers. They must be invoked via handle_nested_irq. Prevent the resend even if the interrupt has no valid parent irq set. Its better to have a lost interrupt than a crashing machine. Reported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Haggai Eran authored
commit c9d120b0 upstream. If dma-debug is disabled due to a memory error, DMA unmaps do not affect the dma_active_cacheline radix tree anymore, and debug_dma_assert_idle() can print false warnings. Disable debug_dma_assert_idle() when dma_debug_disabled() is true. Signed-off-by:
Haggai Eran <haggaie@mellanox.com> Fixes: 0abdd7a8 ("dma-debug: introduce debug_dma_assert_idle()") Cc: Dan Williams <dan.j.williams@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Horia Geanta <horia.geanta@freescale.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mike Snitzer authored
commit bb8bd38b upstream. bio_integrity_alloc() and bio_integrity_free() assume that if a bio was allocated from a bioset that that bioset also had its bio_integrity_pool allocated using bioset_integrity_create(). This is a very bad assumption given that bioset_create() and bioset_integrity_create() are completely disjoint. Not all callers of bioset_create() have been trained to also call bioset_integrity_create() -- and they may not care to be. Fix this by falling back to kmalloc'ing 'struct bio_integrity_payload' rather than force all bioset consumers to (wastefully) preallocate a bio_integrity_pool that they very likely won't actually need (given the niche nature of the current block integrity support). Otherwise, a NULL pointer "Kernel BUG" with a trace like the following will be observed (as seen on s390x using zfcp storage) because dm-io doesn't use bioset_integrity_create() when creating its bioset: [ 791.643338] Call Trace: [ 791.643339] ([<00000003df98b848>] 0x3df98b848) [ 791.643341] [<00000000002c5de8>] bio_integrity_alloc+0x48/0xf8 [ 791.643348] [<00000000002c6486>] bio_integrity_prep+0xae/0x2f0 [ 791.643349] [<0000000000371e38>] blk_queue_bio+0x1c8/0x3d8 [ 791.643355] [<000000000036f8d0>] generic_make_request+0xc0/0x100 [ 791.643357] [<000000000036f9b2>] submit_bio+0xa2/0x198 [ 791.643406] [<000003ff801f9774>] dispatch_io+0x15c/0x3b0 [dm_mod] [ 791.643419] [<000003ff801f9b3e>] dm_io+0x176/0x2f0 [dm_mod] [ 791.643423] [<000003ff8074b28a>] do_reads+0x13a/0x1a8 [dm_mirror] [ 791.643425] [<000003ff8074b43a>] do_mirror+0x142/0x298 [dm_mirror] [ 791.643428] [<0000000000154fca>] process_one_work+0x18a/0x3f8 [ 791.643432] [<000000000015598a>] worker_thread+0x132/0x3b0 [ 791.643435] [<000000000015d49a>] kthread+0xd2/0xd8 [ 791.643438] [<00000000005bc0ca>] kernel_thread_starter+0x6/0xc [ 791.643446] [<00000000005bc0c4>] kernel_thread_starter+0x0/0xc Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Michal Marek authored
commit 61754c18 upstream. Since commit a1c48bb1 (Makefile: Fix unrecognized cross-compiler command line options), the arch Makefile is included earlier by the main Makefile, preventing the arc architecture to set its -O3 compiler option. Since there might be more use cases for an arch Makefile to fine-tune the options, add support for ARCH_CPPFLAGS, ARCH_AFLAGS and ARCH_CFLAGS variables that are appended to the respective kbuild variables. The user still has the final say via the KCPPFLAGS, KAFLAGS and KCFLAGS variables. Reported-by:
Vineet Gupta <Vineet.Gupta1@synopsys.com> Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Alexey Brodkin authored
commit f51e2f19 upstream. Currently instruction_pointer() returns pt_regs->ret and so return value is of type "long", which implicitly stands for "signed long". While that's perfectly fine when dealing with 32-bit values if return value of instruction_pointer() gets assigned to 64-bit variable sign extension may happen. And at least in one real use-case it happens already. In perf_prepare_sample() return value of perf_instruction_pointer() (which is an alias to instruction_pointer() in case of ARC) is assigned to (struct perf_sample_data)->ip (which type is "u64"). And what we see if instuction pointer points to user-space application that in case of ARC lays below 0x8000_0000 "ip" gets set properly with leading 32 zeros. But if instruction pointer points to kernel address space that starts from 0x8000_0000 then "ip" is set with 32 leadig "f"-s. I.e. id instruction_pointer() returns 0x8100_0000, "ip" will be assigned with 0xffff_ffff__8100_0000. Which is obviously wrong. In particular that issuse broke output of perf, because perf was unable to associate addresses like 0xffff_ffff__8100_0000 with anything from /proc/kallsyms. That's what we used to see: ----------->8---------- 6.27% ls [unknown] [k] 0xffffffff8046c5cc 2.96% ls libuClibc-0.9.34-git.so [.] memcpy 2.25% ls libuClibc-0.9.34-git.so [.] memset 1.66% ls [unknown] [k] 0xffffffff80666536 1.54% ls libuClibc-0.9.34-git.so [.] 0x000224d6 1.18% ls libuClibc-0.9.34-git.so [.] 0x00022472 ----------->8---------- With that change perf output looks much better now: ----------->8---------- 8.21% ls [kernel.kallsyms] [k] memset 3.52% ls libuClibc-0.9.34-git.so [.] memcpy 2.11% ls libuClibc-0.9.34-git.so [.] malloc 1.88% ls libuClibc-0.9.34-git.so [.] memset 1.64% ls [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 1.41% ls [kernel.kallsyms] [k] __d_lookup_rcu ----------->8---------- Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: arc-linux-dev@synopsys.com Cc: linux-kernel@vger.kernel.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Vineet Gupta authored
commit 97709069 upstream. ARC kernels have historically been built with -O3, despite top level Makefile defaulting to -O2. This was facilitated by implicitly ordering of arch makefile include AFTER top level assigned -O2. An upstream fix to top level a1c48bb1 ("Makefile: Fix unrecognized cross-compiler command line options") changed the ordering, making ARC -O3 defunct. Fix that by NOT relying on any ordering whatsoever and use the proper arch override facility now present in kbuild (ARCH_*FLAGS) Depends-on: ("kbuild: Allow arch Makefiles to override {cpp,ld,c}flags") Suggested-by:
Michal Marek <mmarek@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Heiko Carstens authored
commit 0b991f5c upstream. Stephen Powell reported the following crash on a z890 machine: Kernel BUG at 00000000001219d0 [verbose debug info unavailable] illegal operation: 0001 ilc:3 [#1] SMP Krnl PSW : 0704e00180000000 00000000001219d0 (init_cache_level+0x38/0xe0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3 Krnl Code: 00000000001219c2: a7840056 brc 8,121a6e 00000000001219c6: a7190000 lghi %r1,0 #00000000001219ca: eb101000004c ecag %r1,%r0,0(%r1) >00000000001219d0: a7390000 lghi %r3,0 00000000001219d4: e310f0a00024 stg %r1,160(%r15) 00000000001219da: a7080000 lhi %r0,0 00000000001219de: a7b9f000 lghi %r11,-4096 00000000001219e2: c0a0002899d9 larl %r10,634d94 Call Trace: [<0000000000478ee2>] detect_cache_attributes+0x2a/0x2b8 [<000000000097c9b0>] cacheinfo_sysfs_init+0x60/0xc8 [<00000000001001c0>] do_one_initcall+0x98/0x1c8 [<000000000094fdc2>] kernel_init_freeable+0x212/0x2d8 [<000000000062352e>] kernel_init+0x26/0x118 [<000000000062fd2e>] kernel_thread_starter+0x6/0xc The illegal operation was executed because of a missing facility check, which should have made sure that the ECAG execution would only be executed on machines which have the general-instructions-extension facility installed. Reported-and-tested-by:
Stephen Powell <zlinuxman@wowway.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Michael Holzheu authored
commit 30342fe6 upstream. Currently we assumed the following BPF to eBPF register mapping: - BPF_REG_A -> BPF_REG_7 - BPF_REG_X -> BPF_REG_8 Unfortunately this mapping is wrong. The correct mapping is: - BPF_REG_A -> BPF_REG_0 - BPF_REG_X -> BPF_REG_7 So clear the correct registers and use the BPF_REG_A and BPF_REG_X macros instead of BPF_REG_0/7. Fixes: 05462310 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
commit cad49cfc upstream. If a machine check happens, the machine has the vector facility installed and the extended save area exists, the cpu will save vector register contents into the extended save area. This is regardless of control register 0 contents, which enables and disables the vector facility during runtime. On each machine check we should validate the vector registers. The current code however tries to validate the registers only if the running task is using vector registers in user space. However even the current code is broken and causes vector register corruption on machine checks, if user space uses them: the prefix area contains a pointer (absolute address) to the machine check extended save area. In order to save some space the save area was put into an unused area of the second prefix page. When validating vector register contents the code uses the absolute address of the extended save area, which is wrong. Due to prefixing the vector instructions will then access contents using absolute addresses instead of real addresses, where the machine stored the contents. If the above would work there is still the problem that register validition would only happen if user space uses vector registers. If kernel space uses them also, this may also lead to vector register content corruption: if the kernel makes use of vector instructions, but the current running user space context does not, the machine check handler will validate floating point registers instead of vector registers. Given the fact that writing to a floating point register may change the upper halve of the corresponding vector register, we also experience vector register corruption in this case. Fix all of these issues, and always validate vector registers on each machine check, if the machine has the vector facility installed and the extended save area is defined. Signed-off-by:
-
Martin Schwidefsky authored
commit f9c87a6f upstream. If the kernel is compiled with gcc 5.1 and the XZ compression option the decompress_kernel function calls _sclp_print_early in 64-bit mode while the content of the upper register half of %r6 is non-zero. This causes a specification exception on the servc instruction in _sclp_servc. The _sclp_print_early function saves and restores the upper registers halves but it fails to clear them for the 31-bit code of the mini sclp driver. Signed-off-by:
-
Heiko Carstens authored
commit e47994dd upstream. The sfpc inline assembly within execve_tail() may incorrectly set bits 28-31 of the sfpc instruction to a value which is not zero. These bits however are currently unused and therefore should be zero so we won't get surprised if these bits will be used in the future. Therefore remove the second operand from the inline assembly. Signed-off-by:
-
Vutla, Lokesh authored
commit acb33cc5 upstream. dma_unmap_sg() is being called twice after completing the task. Looks like this is a copy paste error when creating des driver. With this the following warn appears during boot: [ 4.210457] ------------[ cut here ]------------ [ 4.215114] WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1080 check_unmap+0x710/0x9a0() [ 4.222899] omap-des 480a5000.des: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x00000000ab2ce000] [size=8 bytes] [ 4.236785] Modules linked in: [ 4.239860] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.39-02999-g1bc045a-dirty #182 [ 4.247918] [<c001678c>] (unwind_backtrace) from [<c0012574>] (show_stack+0x10/0x14) [ 4.255710] [<c0012574>] (show_stack) from [<c05a37e8>] (dump_stack+0x84/0xb8) [ 4.262977] [<c05a37e8>] (dump_stack) from [<c0046464>] (warn_slowpath_common+0x68/0x8c) [ 4.271107] [<c0046464>] (warn_slowpath_common) from [<c004651c>] (warn_slowpath_fmt+0x30/0x40) [ 4.279854] [<c004651c>] (warn_slowpath_fmt) from [<c02d50a4>] (check_unmap+0x710/0x9a0) [ 4.287991] [<c02d50a4>] (check_unmap) from [<c02d5478>] (debug_dma_unmap_sg+0x90/0x19c) [ 4.296128] [<c02d5478>] (debug_dma_unmap_sg) from [<c04a77d8>] (omap_des_done_task+0x1cc/0x3e4) [ 4.304963] [<c04a77d8>] (omap_des_done_task) from [<c004a090>] (tasklet_action+0x84/0x124) [ 4.313370] [<c004a090>] (tasklet_action) from [<c004a4ac>] (__do_softirq+0xf0/0x20c) [ 4.321235] [<c004a4ac>] (__do_softirq) from [<c004a840>] (irq_exit+0x98/0xec) [ 4.328500] [<c004a840>] (irq_exit) from [<c000f9ac>] (handle_IRQ+0x50/0xb0) [ 4.335589] [<c000f9ac>] (handle_IRQ) from [<c0008688>] (gic_handle_irq+0x28/0x5c) Removing the duplicate call to dma_unmap_sg(). Reported-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Andrey Ryabinin authored
commit d4f86bea upstream. While populating zero shadow wrong bits in upper level page tables used. __PAGE_KERNEL_RO that was used for pgd/pud/pmd has _PAGE_BIT_GLOBAL set. Global bit is present only in the lowest level of the page translation hierarchy (ptes), and it should be zero in upper levels. This bug seems doesn't cause any troubles on Intel cpus, while on AMDs it cause kernel crash on boot. Use _KERNPG_TABLE bits for pgds/puds/pmds to fix this. Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-5-git-send-email-a.ryabinin@samsung.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andrey Ryabinin authored
commit 241d2c54 upstream. load_cr3() doesn't cause tlb_flush if PGE enabled. This may cause tons of false positive reports spamming the kernel to death. To fix this __flush_tlb_all() should be called explicitly after CR3 changed. Signed-off-by:
-
Alexander Popov authored
commit 5d5aa3cf upstream. Currently KASAN shadow region page tables created without respect of physical offset (phys_base). This causes kernel halt when phys_base is not zero. So let's initialize KASAN shadow region page tables in kasan_early_init() using __pa_nodebug() which considers phys_base. This patch also separates x86_64_start_kernel() from KASAN low level details by moving kasan_map_early_shadow(init_level4_pgt) into kasan_early_init(). Remove the comment before clear_bss() which stopped bringing much profit to the code readability. Otherwise describing all the new order dependencies would be too verbose. Signed-off-by:
Alexander Popov <alpopov@ptsecurity.com> Signed-off-by:
-
Andrey Ryabinin authored
commit d0f77d4d upstream. Currently x86_64_start_kernel() has two KASAN related function calls. The first call maps shadow to early_level4_pgt, the second maps shadow to init_level4_pgt. If we move clear_page(init_level4_pgt) earlier, we could hide KASAN low level detail from generic x86_64 initialization code. The next patch will do it. Signed-off-by:
-
Al Viro authored
commit 75a6f82a upstream. Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Acked-by:
J. Bruce Fields <bfields@fieldses.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Stefan Agner authored
commit 25b401c1 upstream. If a valid power regulator or a dummy regulator is used (which happens to be the case when no regulator is specified), restart_work is queued no matter whether the device was running or not at suspend time. Since work queues get initialized in the ndo_open callback, resuming leads to a NULL pointer exception. Reverse exactly the steps executed at suspend time: - Enable the power regulator in any case - Enable the transceiver regulator if the device was running, even in case we have a power regulator - Queue restart_work only in case the device was running Fixes: bf66f373 ("can: mcp251x: Move to threaded interrupts instead of workqueues.") Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Sergei Shtylyov authored
commit c1a4c87b upstream. Printing IRQ # using "%x" and "%u" unsigned formats isn't quite correct as 'ndev->irq' is of type *int*, so the "%d" format needs to be used instead. While fixing this, beautify the dev_info() message in rcar_can_probe() a bit. Fixes: fd115931 ("can: add Renesas R-Car CAN driver") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
J.D. Schroeder authored
commit 03336519 upstream. The previous change 3973c526 (net: can: c_can: Disable pins when CAN interface is down) causes a slight glitch on the pinctrl settings when used. Since commit ab78029e (drivers/pinctrl: grab default handles from device core), the device core will automatically set the default pins. This causes the pins to be momentarily set to the default and then to the sleep state in register_c_can_dev(). By adding an optional "enable" state, boards can set the default pin state to be disabled and avoid the glitch when the switch from default to sleep first occurs. If the "enable" state is not available c_can_pinctrl_select_state() falls back to using the "default" pinctrl state. [Roger Q] - Forward port to v4.2 and use pinctrl_get_select(). Signed-off-by:
J.D. Schroeder <jay.schroeder@garmin.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Sergei Shtylyov authored
commit 5e63e6ba upstream. rcar_can_probe() regards 0 as a wrong IRQ #, despite platform_get_irq() that it calls returns negative error code in that case. This leads to the following being printed to the console when attempting to open the device: error requesting interrupt fffffffa because rcar_can_open() calls request_irq() with a negative IRQ #, and that function naturally fails with -EINVAL. Check for the negative error codes instead and propagate them upstream instead of just returning -ENODEV. Fixes: fd115931 ("can: add Renesas R-Car CAN driver") Signed-off-by:
-
Oliver Hartkopp authored
commit d3b58c47 upstream. Commit 514ac99c "can: fix multiple delivery of a single CAN frame for overlapping CAN filters" requires the skb->tstamp to be set to check for identical CAN skbs. Without timestamping to be required by user space applications this timestamp was not generated which lead to commit 36c01245 "can: fix loss of CAN frames in raw_rcv" - which forces the timestamp to be set in all CAN related skbuffs by introducing several __net_timestamp() calls. This forces e.g. out of tree drivers which are not using alloc_can{,fd}_skb() to add __net_timestamp() after skbuff creation to prevent the frame loss fixed in mainline Linux. This patch removes the timestamp dependency and uses an atomic counter to create an unique identifier together with the skbuff pointer. Btw: the new skbcnt element introduced in struct can_skb_priv has to be initialized with zero in out-of-tree drivers which are not using alloc_can{,fd}_skb() too. Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Markos Chandras authored
commit fcc53b5f upstream. Commit 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed the 64-bit CPU case leading to FPU failures when requesting FR=1 mode (which is always the case for MIPS R6 userland) when running a 32-bit kernel on a 64-bit CPU. We also fix the MIPS R2 case. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Fixes: 6134d949 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10734/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Paul Burton authored
commit 4e9d324d upstream. MIPS32r6 code requires FP64 (ie. FR=1) support. Building a kernel with support for MIPS32r6 binaries but without support for O32 with FP64 is therefore a problem which can lead to incorrectly executed userland. CONFIG_MIPS_O32_FP64_SUPPORT is already selected when the kernel is configured for MIPS32r6, but not when the kernel is configured for MIPS64r6 with O32 compat support. Select CONFIG_MIPS_O32_FP64_SUPPORT in such configurations to prevent building kernels which execute MIPS32r6 userland incorrectly. Signed-off-by:
-
Markos Chandras authored
commit cccf34e9 upstream. MT_SMP is not the only SMP option for MT cores. The MT_SMP option allows more than one VPE per core to appear as a secondary CPU in the system. Because of how CM works, it propagates the address-based cache ops to the secondary cores but not the index-based ones. Because of that, the code does not use IPIs to flush the L1 caches on secondary cores because the CM would have done that already. However, the CM functionality is independent of the type of SMP kernel so even in non-MT kernels, IPIs are not necessary. As a result of which, we change the conditional to depend on the CM presence. Moreover, since VPEs on the same core share the same L1 caches, there is no need to send an IPI on all of them so we calculate a suitable cpumask with only one VPE per core. Signed-off-by:
-
Markos Chandras authored
commit 143fefc8 upstream. Commit 5f9f41c4 ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6") added support for emulating the JR instruction on MIPS R6 cores but that introduced a bug which could be triggered when hitting a JALR opcode because the code used the wrong field in the 'r_format' struct to determine the instruction opcode. This lead to crashes because an emulated JALR instruction was treated as a JR one when the R6 emulator was turned off. Fixes: 5f9f41c4 ("MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6") Signed-off-by:
-
Lucas Stach authored
commit d438462c upstream. If CONFIG_PM is not set the PU power domain needs to be enabled always, otherwise there are two failure scenarios which will hang the system if one of the devices in the PU domain is accessed. 1. New DTs (4.1+) drop the "always-on" property from the PU regulator, so if it isn't properly enabled by the GPC code it will be disabled at the end of boot. 2. If the bootloader already disabled the PU domain the GPC explicitly needs to enable it again, even if the kernel doesn't do any power management. This is a bit hypothetical, as it requires to boot a mainline kernel on a downstream bootloader, as no mainline bootloader disables the PM domains. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Marek Szyprowski authored
commit 462859aa upstream. nr_bitmaps member of mapping structure stores the number of already allocated bitmaps and it is interpreted as loop iterator (it starts from 0 not from 1), so a comparison against number of possible bitmap extensions should include this fact. This patch fixes this by changing the extension failure condition. This issue has been introduced by commit 4d852ef8 ("arm: dma-mapping: Add support to extend DMA IOMMU mappings"). Reported-by:
Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Roger Quadros authored
commit 9ab402ae upstream. Without this USB2 breaks if USB1 is disabled or USB1 initializes after USB2 e.g. due to deferred probing. Fixes: 5a0f93c6 ("ARM: dts: Add am57xx-beagle-x15") Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Roger Quadros authored
commit 2acb5c30 upstream. Driver core sets "default" pinmux on on probe and CAN driver sets "sleep" pinmux during register. This causes a small window where the CAN pins are in "default" state with the DCAN module being disabled. Change the "default" state to be like sleep so this glitch is avoided. Add a new "active" state that is used by the driver when CAN is actually active. Signed-off-by:
-
